Oceaneering developed an Installation Workover Control System (IWOCS) in 1990 for use with a mudline tree. Now, Oceaneering offers a large fleet of leased IWOCS designed for all types of installations or workovers, including deepwater projects. Dedicated IWOCS project managers, engineers and technicians oversee and maintain the fleet for daily operations. With dozens of IWOCS units available on call, customers can perform installations and workovers as required on trees from all equipment manufacturers. Oceaneering s IWOCS experience includes record water depths and working pressures to 15,000 lb. Custom capabilities and systems are also offered. Leased System Components: Hydraulic Control Units Umbilical Reels Chemical Injection Pumping Systems Electrical Downlines Heave Compensated Retrievable Umbilical Systems Associated IWOCS Tooling 06/12 www.oceaneering.com
Electrically Driven HPU Defining the state of the art in IWOCS hydraulic power equipment, Oceaneering s electrically driven Hydraulic Power Units (HPU) are built with the high power capabilities required by deepwater drilling markets. The units are capable of pumping water-glycol control fluids, and producing output pressures from 0 to 20,000 psi. Air Driven HPU Repeatedly proven offshore, Oceaneering air driven IWOCS HPUs are simple and reliable in operation. Featuring state of the art safety and Emergency Shut Down (ESD) capabilities, air driven HPUs form the core of the IWOCS fleet. Oceaneering s IWOCS power units are available in various sizes, configurations and capabilities that will match a customer s specific requirements. 2
Multi-line IWOCS Reels From the simplest mud-line tree installation reels to models capable of handling the deepest water depths completed in the Gulf of Mexico, Oceaneering s IWOCS reels are configured for specific job requirements. Electro-hydraulic and direct hydraulic configurations are available. Utility Reels Oceaneering also offers smaller utility/single line reels. Available with single hydraulic, HCR flat-pack, or a variety of electric down lines, these umbilical reels fill specific project needs economically. 3
Pumping Systems Installation and workover projects typically require large volume chemical injection pumping systems. Oceaneering s IWOCS include Chemical Injection Systems with pressures ranging to 20,000 psi. All Oceaneering chemical pumps are provided with rig ready bumper systems, manifolds and certified lifting gear. Electrically Driven Pumping Systems Driven from rig electrical power, these systems can offer large volume pumping solutions. Offered with Class 1 Div 1 or electrical capabilities, these systems are delivered with operator controls and connections for tote tank fluid reservoirs. Air Driven Pumping Systems Driven from rig air supplies, these systems provide an economical alternative to multi-pump, or electrically driven systems. All air driven packages can be connected in parallel to achieve customer required flowrates. 4
Driller s Console Panels As secondary panels to key operations and ESD functions, driller s consoles are delivered with carbon steel frames, stainless panels, and project specific tags. The panels are offered in pneumatic, hydraulic, or electrical configurations. Oceaneering Electrically Piloted Hydraulic (EPH) (Mini-Pod) Control Panels Developed to drive Oceaneering s electrically piloted hydraulic control module, the Mini-Pod Control Panel provides power and control functions for SIT and on-rig testing of the EPH module. Accumulator Racks Oceaneering configures accumulator racks for specific hydraulic requirements, when needed. 5
Flushing Units Flushing units are available with the Oceaneering IWOCS to provide efficient filtration of control fluids. Each unit comes ready for work with a rig ready bumper system. Fluid Analysis Units Oceaneering service personnel use fluid analysis systems to analyze and confirm the status of fluid contaminant levels during job preparation. These optical units provide operators with an extra measure of system reliability when compared to automated systems. Deionized Water System As part of the IWOCS flushing system Oceaneering offers deionized water systems for flushing of chemical and hydraulic systems. Aluminum Guide Funnel System The upper portion of Oceaneering s guide wire based deployment system is comprised of lightweight and easy to install aluminum guide funnels. 6
Lower Guide Funnels - Steel As part of Oceaneering s guide wire based IWOCS deployment system, steel guide funnels are the lower most units deployed. These funnels typically are configured with space for umbilical connection hardware and disconnection systems. Umbilical Riser Clamps Oceaneering fabricates proprietary umbilical clamps for use with its IWOCS. Constructed of 316 SS with polyurethane inserts, the clamps are designed for fast installation and rock solid stability without damage to the umbilical. Oceaneering offers umbilical clamps in a variety of configurations, including wireline, choke / kill and riser attachment models. Umbilical & Electrical Turndown Sheaves Oceaneering utilizes internally designed turn-down sheaves for both electrical and hydraulic umbilical rigging. Designed for quick loading and ease of installation onboard the vessel, the sheaves provide protection to the umbilical from over bending stresses and point loading during running applications. 7
Tuggers Oceaneering can provide tuggers for any IWOCS application. Available in a wide range of pull ratings, power sources, braking and wire capacities, Oceaneering can provide a job specific tugger for your application. Snatch Blocks, Utility Slings & Miscellaneous Rigging When the overall running rigging requires accessory options to complete the job, Oceaneering can provide the necessary parts. From small utility slings to large capacity snatch blocks, all components are subject to a vigorous maintenance program and are supplied tagged and proof tested. Mechanical Guillotines Oceaneering s mechanical guillotines are the simplest configuration for disconnection. The guillotines provide a single point location for the re-termination of the umbilical in the event of a drive off. The guillotines are fixed to a stationary location and are activated by the severing of a shear pin. They are supplied proof tested for a specific load range. 8
Hydraulic Guillotines Oceaneering s hydraulic guillotines are similar in principle to the mechanical guillotines. The hydraulic type provides direct user control of the guillotine shearing action. SEDA Disconnect System The Subsea Emergency Disconnect Assembly (SEDA) is designed to allow the disconnection of the umbilical from the tree in an emergency event. The SEDA allows disconnection of hydraulic and electrical functions without damage to the umbilical. Hydraulically controlled from the surface, the SEDA can be reconnected via a Remotely Operated Vehicle (ROV). Gang Boxes Utilized for small packages of equipment, gang boxes are constructed of aluminum and steel as required for the project. The boxes are modified on a project by project basis according to job specifications. 9
Containers Typically supplied with a complete IWOCS system, Oceaneering containers are used for bulk storage. The containers meet standard ISO specifications for 10, 20, or 40-foot models and are internally modified as required. Work Vans Very similar to our storage containers, Oceaneering offers ISO compliant shipping containers that are internally modified to meet project needs. Typically outfitted with work spaces, small parts storage and lighting, work vans provide a location for maintenance tasks that is isolated from rig work. Liquid Tote Tanks Rugged and ready for shipment offshore, Oceaneering can provide liquid tote tanks in a large range of capacities. Tote tanks are provided with tested lifting slings and are labeled for lifting load limits. Hydrotesting HPUs Oceaneering offers hydrotesting HPUs for pressures to 30,000 psi, with flow rates up to 4 gallons per minute. Pneumatic or eclectically driven HPUs are available. All units are supplied with certified slings and are approved for offshore use. 10
Chart Recorders Oceaneering s calibrated chart recorders are battery powered timing mechanisms that allow printed reports for pressure testing. The timers enable the operator to choose from various settings. Dual Pin Configurations 10 ksi and 5 ksi 10 ksi and 15 ksi 10 ksi and 20 ksi Tri-Pin Configurations 5 ksi, 10 ksi, 15 ksi 10ksi, 15 ksi, 20 ksi 10ksi, 20 ksi, 0-150 degree Calibrated Gauges Oceaneering s calibrated gauges are high quality, glycerin filled test gauges. Sizes include 4 in and 6 in faces with the following pressure ranges available: 0-5,000 psi 0-10,000 psi 0-15,000 psi 0-20,000 psi 0-30,000 psi 11
United States Huntsville, Alabama San Diego, California Groton, Connecticut Orlando, Florida Panama City, Florida Pearl Harbor, Hawaii Bayou Vista, Louisiana Houma, Louisiana Lafayette, Louisiana Morgan City, Louisiana New Orleans, Louisiana Hanover, Maryland Portsmouth, New Hampshire Middletown, Rhode Island Clear Lake, Texas Corpus Christi, Texas Friendswood, Texas Houston, Texas Chesapeake, Virginia Silverdale, Washington International Cabinda, Angola Lobito, Angola Luanda, Angola Baku, Azerbaijan Perth, Western Australia Macaé, Brazil Niteroi - RJ, Brazil St. John s, Newfoundland, Canada Halifax, Nova Scotia, Canada Cairo, Egypt Gloucester, England Immingham, England London, England Stockton, England Thurrock, England Whitley Bridge, England Malabo, Equatorial Guinea Mumbai, India Kuala Lumpur, Malaysia Miri, Sarawak, Malaysia Mexico D.F., Mexico Cd. del Carmen, Mexico Eket, Nigeria Ikeja, Lagos, Nigeria Port Harcourt, Nigeria Warri, Nigeria Nodeland, Norway Stavanger, Norway Johannesburg, Republic of South Africa Aberdeen, Scotland Rosyth, Scotland Jurong, Singapore Zug, Switzerland Abu Dhabi, U.A.E. Dubai, U.A.E. Swansea, Wales Denotes Corporate Office Oceaneering International, Inc. 11911 FM 529 Houston, TX 77041 Phone: 713.329.4500 www.oceaneering.com GRAYLOC and OCEANEERING are registered trademarks of Oceaneering International, Inc.