DILUME Designer Roberto Florato

DILUME SERIES

DILUME Designer Roberto Florato The Dilume series of products is designed with attention to architectual detail, lighting distribution and performance. Available in LED, Metal Halide and Compact Fluorescent, in both mono and dual emissions. Reflectors with computer designed optics provide a variety of beam distributions and can be interchanged for flexibility in custom requirements. Integral 0-10V dimming driver standard. Photocell, integral EM, motion response, and quartz restrike available upon request. Standard finishes; Iron Gray and Steel Gray. White, Black, Bronze and any other colors available upon request. Dilume complies with dark sky requirements when used as a downlight. UL wet location (IP65).

A series of wall mounted and suspended luminaires for indoor or outdoor use. Offering single and dual distributions in LED, HID, or Compact Fluorescent triple tube lamps. Controlled optics available for the metal halide product offering (symmetrical, asymmetrical, and wall wash distribution). The Dilume can be wall mounted or suspended with four aircraft cables using a quick adjustment system. Depending on size of fixture, the optical compartment is designed to accept a variety of lamp sources, including LED, which makes the Dilume the ideal solution to a wide range of applications, including pedestrian areas, commercial and industrial buildings, and stairwells. PRISMA ARCHITECTURAL LIGHTING

DILUME Distributions can be single output, either direct or indirect, or dual direct/indirect output.

Dilume Pendant Flat features suspended light and is characterized by a low profile-design housing nesting a single compact fluorescent lamp. Available in both single and dual light distributions. 11

PRISMA ARCHITECTURAL LIGHTING 300x230 LED Comp Fluorescent Metal Halide 300 FLAT Comp Fluorescent Metal Halide 500x220 LED 300x400 Comp Fluorescent Metal Halide Comp Fluorescent 500x500 Metal Halide Comp Fluorescent Metal Halide 500 FLAT Comp Fluorescent DILUME LED Dilume is offered in LED for the 300x230 and 500x220 versions. Three IES distribution types to choose from (type II, type III, and type IV). Features either mono emission for full cut-off applications or bi-emission for direct/indirect applications. Both sizes also offer photocell options and an integral battery pack in mono-emission versions.

DILUME METAL HALIDE PRISMA ARCHITECTURAL LIGHTING Type A Reflector Asymmetric reflector, with 45 front vertical angle beam and 10 back vertical angle beam, and 70 lateral width beam. 10 45 70 45 88 20 Type B Reflector Wall washer reflector, with 45 /88 front vertical angle beam and 20 lateral width beam. 70 60 Type C Reflector Symmetric reflector, with 70 front vertical angle beam and 60 lateral width beam. 70 60 The three reflector designs with precise controlled optics are available for the Metal Halide product offering. The reflectors, using the purest grade anodized aluminum available today, are Type 99.85 and are designed and polished for maximum lumen output and efficiency. Integral Quartz Restrike available upon request.

DILUME DILUME COMPACT FLUORESCENT The higher wattage compact fluorescent luminaires, in both single and dual light distributions, are specifically designed for general indoor or outdoor illumination. Emergency Battery Packs (EMPK) are available upon request. Consult factory. The wall mounting bracket simplifies installation by allowing the installer to mount the wall bracket first, then hang the luminaire and complete the installation.

DILUME 300x230 LED Wall mounted luminaire for exterior and interior use. Suitable for commercial and residential areas, such as malls, courtyards, hospitals, and any space where performance, elegance or design flexibility is required. Extruded aluminum housing 11.8" (300mm) wide. Various height profiles allow for versatile applications, lamp types and reflector styles. LED PRISMA ARCHITECTURAL 28w Mono / 42w Bi Die cast aluminum bracket for wall mounting. The wall hinging mechanism allows for easy mounting and wiring. Die cast aluminum trim and cover. Tempered soda lime glass diffuser resists thermal shocks. High temperature silicone gasket seals out moisture, dust, and external contaminants. Bi Emission (B) Type II Bi Emission (B) Type III Bi Emission (B) Type IV Mono Emission (M) Type II W n W e c 5 5.91 2.76 mol 6.58 9.02 D12.6 LEE] 3.93 3.15 2.13 0.51 Mono Emission (M) Type III Mono Emission (M) Type IV 3.98 11.54 PERFORMANCE IN LIGHTING 2621 Keys Pointe Conyers, GA 30013 - USA phone 770.822.2115 fax 770.822.9925 www.pil-usa.com info@pil-usa.com

DILUME 300x230 LED LED PRISMA ARCHITECTURAL 28w Mono / 42w Bi W n W e c 5 Options: add "-EM" suffix to any MONO version for Integral Emergency Battery option add "-PHC" suffix to any version for Photocell option add "-CC" suffix to any version for Custom Color finish add "-MR" suffix to any version for Motion Response option contact factory for non-standard color temps all lumens listed are Delivered Lumens PERFORMANCE IN LIGHTING 2621 Keys Pointe Conyers, GA 30013 - USA phone 770.822.2115 fax 770.822.9925 www.pil-usa.com info@pil-usa.com

DILUME - WALL MOUNT LUMINAIRES DILUME 300x230 e Dilume 300x230 B 1x70W MH r Dilume 300x230 B 1x57W CFL DILUME 300X230 B e G12 1x70w MH M139 T6 r GX24q-5 1x57w CFL DILUME 300X230 M r GX24q-5 1x57w CFL DILUME 300X230 M/A DILUME 300X230 M/B DILUME 300X230 M/C e G12 1x70w MH M139 T6 r Dilume 300x230 M 1x57W CFL e Dilume 300x230 M/B 1x70W MH Luminaire for interior and exterior use. Powdercoat 10 step process heavy extruded aluminum housing 11.8" width, featuring varying sizes to accommodate electrical components. Powdercoat copper free die cast aluminum trims and caps. Powdercoat 10 step process die cast aluminum bracket for wall mounted applications, featuring ease of installation. Clear tempered glass diffuser, 0.157" thick. Polymer gasket. Aluminum type 99.85 reflectors with controlled optics G12 lamp type versions, featuring light beam type A, B, or C. B versions, with dual light output, are supplied with either one or two lamps and are specifically designed for direct/indirect light distribution. e Dilume 300x230 M/A 1x70W MH e Dilume 300x230 M/C 1x70W MH M versions, with single light output, are supplied with a single lamp and can be used for either direct or indirect light distribution. Compact fluorescent or HID lamp versions with direct/indirect light distribution. Reflectors can be supplied varying combinations. Consult factory. UL listed. Suitable for wet locations. MATTE METALLIC GRAY IRON GRAY 3.98 5.91 2.76 12.6 3.15 6.58 9.02 3.93 0.51 2.13 11.54

PRISMA ARCHITECTURAL LIGHTING DILUME 300x230 Options: add "-EM" suffix to any MONO version for Integral Emergency Battery option add "-PHC" suffix to any version for Photocell option add "-CC" suffix to any version for Custom Color finish add "-MR" suffix to any version for Motion Response option PERFORMANCE IN LIGHTING 2621 Keys Pointe Conyers, GA 30013 - USA phone 770.822.2115 fax 770.822.9925 www.pil-usa.com info@pil-usa.com

DILUME - WALL MOUNT LUMINAIRES DILUME 300x420 e Dilume 300x420 B/AA 1x70W + 1x39W MH e Dilume 300x420 B/BB 1x70W + 1x39W MH e Dilume 300x420 B/CC 1x70W + 1x39W MH DILUME 300X420 B r GX24q-5 2x57w CFL DILUME 300X420 B/AA DILUME 300X420 B/BB DILUME 300X420 B/CC DILUME 300X420 B/AB DILUME 300X420 B/AC DILUME 300X420 B/BC G12 1x70w MH M139 T6 up (indirect) e G12 1x39w MH M130 T6 down (direct) e G12 2x39w MH M130 T6 e Dilume 300x420 B/AB 1x70W + 1x39W MH e Dilume 300x420 B/AC 1x70W + 1x39W MH e Dilume 300x420 B/BC 1x70W + 1x39W MH e Dilume 300x420 B/AA 2x39W MH e Dilume 300x420 B/BB 2x39W MH e Dilume 300x420 B/CC 2x39W MH r Dilume 300x420 B 2x57W CFL e Dilume 300x420 B/AB 2x39W MH e Dilume 300x420 B/AC 2x39W MH e Dilume 300x420 B/BC 2x39W MH MATTE METALLIC GRAY IRON GRAY 3.98 5.91 2.76 12.6 3.15 11.54 6.58 16.69 3.43 2.13 0.51

DILUME 300x420 PRISMA ARCHITECTURAL LIGHTING Options: add "-EM" suffix to any MONO version for Integral Emergency Battery option add "-PHC" suffix to any version for Photocell option add "-CC" suffix to any version for Custom Color finish add "-MR" suffix to any version for Motion Response option PERFORMANCE IN LIGHTING 2621 Keys Pointe Conyers, GA 30013 - USA phone 770.822.2115 fax 770.822.9925 www.pil-usa.com info@pil-usa.com

DILUME 500x220 LED LED PRISMA ARCHITECTURAL 48w Mono / 72w Bi Wall mounted luminaire for exterior and interior use. Suitable for commercial and residential areas, such as malls, courtyards, hospitals, and any space where performance, elegance or design flexibility is required. Extruded aluminum housing 19.7" (500mm) wide. Various height profiles allow for versatile applications, lamp types and reflector styles. Die cast aluminum bracket for wall mounting. The wall hinging mechanism allows for easy mounting and wiring. Die cast aluminum trim and cover. I Tempered soda lime glass diffuser resists thermal shocks. High temperature silicone gasket seals out moisture, dust, and external contaminants. ** custom colors availabe upon request ** contact factory for kelvin temps other than standard offering D, DILUME 500X220 LED M D W n W e c 5 DILUME 500X220 LED B 8.96 2.76 19.69 3.15 6.58 9.06 3.93 0.51 2.13 3.98 18.62 PERFORMANCE IN LIGHTING 2621 Keys Pointe Conyers, GA 30013 - USA phone 770.822.2115 fax 770.822.9925 www.pil-usa.com info@pil-usa.com

PRISMA ARCHITECTURAL DILUME 500x220 LED LED 48w Mono / 72w Bi W n W e c 5 Options: add "-EM" suffix to any MONO version for Integral Emergency Battery option add "-PHC" suffix to any version for Photocell option add "-CC" suffix to any version for Custom Color finish add "-MR" suffix to any version for Motion Response option contact factory for non-standard color temps all lumens listed are Delivered Lumens PERFORMANCE IN LIGHTING 2621 Keys Pointe Conyers, GA 30013 - USA phone 770.822.2115 fax 770.822.9925 www.pil-usa.com info@pil-usa.com

DILUME - WALL MOUNT LUMINAIRES DILUME 500x220 r Dilume 500x220 B 1x70w CFL f Dilume 500x220 B 1x100w MH DILUME 500X220 B f Rx7s 1x100w MH M81 TD-6 r GX24q-6 1x70w CFL DILUME 500X220 M r GX24q-6 1x70w CFL DILUME 500X220 M/A DILUME 500X220 M/B DILUME 500X220 M/C f Rx7s 1x100w MH M81 TD-6 r Dilume 500x220 M 1x70w CFL f Dilume 500x220 M/A 1x100w MH Luminaire for interior and exterior use. Powdercoat 10 step process heavy extruded aluminum housing 19.7 width, featuring varying sizes to accommodate the electrical components. Powdercoat copper free die cast aluminum trims and caps. Powdercoat 10 step process die cast aluminum bracket for wall mounted applications, featuring ease of installation. Clear tempered glass diffuser, 0.157 thick. Polymer gasket. Aluminum type 99.85 reflectors with controlled optics G12 lamp type versions, featuring light beam type A, B, or C. B versions, with dual light output, are supplied with either one or two lamps and are specifically designed for direct/indirect light distribution. M versions, with single light output, are supplied with a single lamp and can be used for either direct or indirect light distribution. Compact fluorescent or HID lamp versions with direct/indirect light distribution. Reflectors can be supplied varying combinations. Consult factory. UL Listed. Suitable for wet locations. f Dilume 500x220 M/B 1x100w MH f Dilume 500x220 M/C 1x100w MH MATTE METALLIC GRAY IRON GRAY 3.98 8.96 2.76 19.69 3.15 6.58 9.06 3.93 0.51 2.13 18.62

DILUME - WALL MOUNT LUMINAIRES DILUME 500x500 f Dilume 500x500 B/AA 2x150w MH f Dilume 500x500 B/BB 2x150w MH f Dilume 500x500 B/CC 2x150w MH DILUME 500X500 B r GX24q-6 2x70w CFL DILUME 500X500 B/AA DILUME 500X500 B/BB DILUME 500X500 B/CC DILUME 500X500 B/AB DILUME 500X500 B/AC DILUME 500X500 B/BC f Rx7s 2x150w MH M81 TD-6 f Dilume 500x500 B/AB 2x150w MH f Dilume 500x500 B/AC 2x150w MH f Dilume 500x500 B/BC 2x150w MH r Dilume 500x500 B 2x70w CFL MATTE METALLIC GRAY IRON GRAY 3.98 8.96 2.76 19.69 3.15 18.62 6.58 19.88 3.93 2.13 0.51

DILUME PENDANT - SUSPENDED LUMINAIRES DILUME PENDANT Suspended luminaire for interior use. Powdercoat 10-step process heavy extruded aluminum housing 11.8" or 19.7" wide, featuring varying sizes to accommodate the electrical gear. Powdercoat copper free die cast aluminum trims and caps. Powdercoat 10 step process die cast aluminum canopy for ceiling mounted applications. Clear tempered glass diffuser, 0.157" thick. Polymer gasket. The housing is suspended from the canopy by 4 stainless steel cables, 79" in length, and included a quick leveling system. Aluminum type 99.85 reflectors with controlled optics for G12 lamps. B versions, with dual light output, are supplied with either one or two lamps and are specifically designed for direct/indirect light distribution. M versions, with single light output, are supplied with a single lamp and can be used for either direct or indirect light distribution. Compact fluorescent or HID lamp gear with direct/indirect light distribution. 1x100W MH Reflectors can be supplied varying combinations. Consult factory. UL listed. Suitable for damp locations. 1x100W MH 1x100W MH

DILUME PENDANT PRISMA ARCHITECTURAL LIGHTING l i Options: add "-EM" suffix to any MONO version for Integral Emergency Battery option add "-PHC" suffix to any version for Photocell option add "-CC" suffix to any version for Custom Color finish add "-MR" suffix to any version for Motion Response option HTING Pointe 3 - USA 2.9925 sa.com a.com

DILUME PENDANT FLAT - SUSPENDED LUMINAIRES DILUME PENDANT FLAT T DILUME PENDANT 300 FLAT B DILUME PENDANT 300 FLAT M/INDIRECT DILUME PENDANT 300 FLAT M/DIRECT r GX24q-3 1x26w CFL DILUME PENDANT 500 FLAT B DILUME PENDANT 500 FLAT M/INDIRECT DILUME PENDANT 500 FLAT M/DIRECT r GX24q-6 1x70w CFL i l i

PRISMA ARCHITECTURAL LIGHTING DILUME PENDANT FLAT PERFORMANCE IN LIGHTING 2621 Keys Pointe Conyers, GA 30013 - USA phone 770.822.2115 fax 770.822.9925 www.pil-usa.com info@pil-usa.com