Translation Stage VT Translation Stage VT-80 Linear Stage VT-7 www.pimicos.com // info@pi-usa.us // 8.82.46 East 949.679.9191 West // www.pi-usa.us
4.110 Linear Stage VT-7 FACTS The VT-7 linear stage was designed for Fx(N) Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) 2 18 2Phase-04 2 88 2 Load characteristics standard industrial applications that require less than 6 µm repeatability and up to 600 mm travel range. Typical applications for this metrology stage are inspection and assembly systems. The low profile yet rigid steel design allows setups with long travel ranges within limited space conditions. A precision ball screw with a 4 mm pitch guarantees a quiet, smooth motion. The VT-7 linear stages are equipped with a roller guide system and are motorized with a DC or 2-phase stepper motor. Additionally the VT-7 can be ordered with our SMC pollux motorcontroller module. TECHNICAL DATA Travel range (mm) 100 200 0 0 0 600 Straightness / Flatness (µm) ±2 ± ±4 ± ±7 ±9 ± 11 Pitch (µrad) ± ± 60 ± 70 ± 80 ± 90 0 ± 110 Yaw (µm) ± ± ± ± 60 ± 80 ± 90 ± 90 Weight (kg) 1.6 2.1 2.7.4 4.1 4.7.4 Motor (Pitch 4 mm) 2Phase-04 1 80 2 2 (RE) 20 (FS) 20 (FS) Speed max. (mm/sec) Resolution calculated (µm) Resolution typical (µm) KEY FEATURES 2 Bi-directional Repeatability (µm) ±6 ±6 ±6 Uni-directional Repeatability (µm) 2 0.98 1.2 0. Travel range up to 600 mm Nominal Current (A) Uni-directional repeatability down to µm Voltage Range (V) Maximum speed 100 mm/sec Accuracy Load capacity up to kg Velocity range (mm/sec) Integrated hall limit switches 24 on request 0.00... 100 Material Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change Steel
Linear Stage VT-7 4.111 APPLICATIONS Travel (mm) 100 200 0 0 0 600 6 A 8 108 18 208 28 8 8 8 B 181 21 1 41 1 61 71 781 C 8 8 8 8 8 8 D 1 1 2 4 6 7 102. 2Phase-04 111. 128 SMC- Pollux Controller integrated CONTROLLERS ROBOTICS LINEAR STAGES ROTATION STAGES PIEZO STAGES MANUAL STAGES ACCESSORIES APPENDI Order No. 6229-9- 1 2Phase-04 2 mm 1 100 mm 2 200 mm 0 mm 4 0 mm 0 mm 6 600 mm 7 HLS-010, Hall limit switches 1 0 6.8 10. 9 2.6. A C 100 B.8 o Dx100 n. 4x M x8 mm 21.. 42. 74. UPS-1 UPM-160 HPS-170 LS-270 LMS-2 LMS-180 LS-180 LS-120 LS-110 LMS-80 LMS-60 PLS-8 LS-6 MTS-6 MTS-70 VT-7 VT-80 LS- VT-21 S CS-4 MS-8 MS-4 KT-120 MS-bio NPE-200 UPL-120 ES-100 ES-82 ES-70 ES- MA- MP-20 MP-20 B MP-1 ASS E www.pimicos.com // info@pi-usa.us // 8.82.46 East 949.679.9191 West // www.pi-usa.us
4.112 Translation Stage VT-80 FACTS Fy(N) Fz(N) Mx(Nm) My(Nm) Mz(Nm) k x(µrad/nm) k y(µrad/nm) 2. 2. 220 1 2Phase-041 2. 2. 220 1 2. 2. 220 1 Load characteristics compensated backlash Fx(N) lead screw guarantee a quiet and smooth motion. The VT-80 translation stages are equipped with integrated limit switches and are motorized with a DC or 2-phase stepper motor. Additionally, the VT-80 can be ordered with our SMC Pollux motorcontroller module. Due to the compact dimensions, the VT-80 stages are especially suitable for lower duty cycles applications in instrumentation. All VT-80 translation stages can be directly The VT-80 translation stage is a popular assembled in Y configurations. The Y laboratory stage that offers a wide range systems with a travel of 2 mm must be of travel lengths. A backlash-free re- assembled at the factory and must be circulating ball bearing along with a specified when ordering. TECHNICAL DATA Travel range (mm) 2 7 100 1 200 2 0 Straightness / Flatness (µm) ±8 ± 11 ± 12 ± 14 ± 20 ± 2 ± Pitch (µrad) 0 ± 110 ± 120 ± 1 ± 1 ± 170 ± 190 ± 210 Yaw (µm) ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 ± 1 Weight (kg) 0. 0.6 0.7 0.7 0.8 0.9 1.1 1.2 Motor (Pitch 1 mm) 2Phase-041 20 20 1 0. (RE) (FS) (FS) Speed max. (mm/sec) Resolution calculated (µm) KEY FEATURES Resolution typical (µm) 0. 0.2 0.2 Bi-directional Repeatability (µm) Uni-directional Repeatability (µm) 0.8 Travel range up to 0 mm Nominal Current (A) 0.98 1.7 0. Uni-directional repeatability down to µm Voltage Range (V) Maximum speed 20 mm/sec Accuracy on request Load capacity up to kg Velocity range (mm/sec) 0.001... 20 Integrated mechanical limit switches Material 24 Aluminum, black anodized Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
Translation Stage VT-80 4.11 APPLICATIONS Travel (mm) 2 7 100 1 200 2 0 A 2. 6 77. 90 11 1 16 190 B 100 12 1 17 22 27 2 7 C 70 9 120 14 19 24 29 4 2 7 7 67. 11 92 48 CONTROLLERS ROBOTICS LINEAR STAGES ROTATION STAGES PIEZO STAGES 2Phase-041 SMC-Pollux Controller integrated MANUAL STAGES ACCESSORIES APPENDI Order No. 62-9- 1 2Phase-041 2 4 2 mm (xy set up by PI micos) 1 mm 2 7 mm 100 mm 4 1 mm 200 mm 6 2 mm 7 0 mm 8 single stage 0 2 mm xy setup 1 72. 2x M6 x 9 2 4.1 8x v n8 x4. / Ø4. 17. A A B 6 o4 C o4 2x M4 x 4x M4 x 2x nh7 x n4. 4x nh7 x4 max. 1 2. 1 2. mm 4x M4 x 4 2 1 UPS-1 UPM-160 HPS-170 LS-270 LMS-2 LMS-180 LS-180 LS-120 LS-110 LMS-80 LMS-60 PLS-8 LS-6 MTS-6 MTS-70 VT-7 VT-80 LS- VT-21 S CS-4 MS-8 MS-4 KT-120 MS-bio NPE-200 UPL-120 ES-100 ES-82 ES-70 ES- MA- MP-20 MP-20 B MP-1 ASS E www.pimicos.com // info@pi-usa.us // 8.82.46 East 949.679.9191 West // www.pi-usa.us
USA (East) & CANADA USA (West) & MEICO PI (Physik Instrumente) L.P. PI (Physik Instrumente) L.P. 16 Albert St. 420 Trabuco Rd., Suite 100 Auburn, MA 011 Irvine, CA 92620 Tel: +1 (8) 82 46 Tel: +1 (949) 679 9191 Fax: +1 (8) 82 06 Fax: +1 (949) 679 9292 Email: info@pi-usa.us Email: info@pi-usa.us www.pi-usa.us www.pi-usa.us GERMANY Headquarters: PI micos GmbH Freiburger Strasse D-79427 Eschbach GERMANY Phone: +49 764 7 0 Fax: +49 764 7 9 e-mail: info@pimicos.com home: www.pimicos.com Physik Instrumente (PI) GmbH & Co. KG Auf der Römerstraße 1 76228 Karlsruhe/Palmbach Tel: +49 (721) 4846-0 Fax: +49 (721) 4846-1019 Email: info@pi.ws www.pi.ws Call Us Today 8.82.46 (East) 949.679.9191 (West)