GLYDEA TM DIRECT DRIVE MOTORIZED CURTAIN TRACK SPECIFICATION DOCUMENT

Transcription

1 GLYDEA TM DIRECT DRIVE MOTORIZED CURTAIN TRACK SPECIFICATION DOCUMENT 1.- GLYDEA TM SYSTEM. DEFINITION AND BENEFITS GLYDEA TM SYSTEM OVERVIEW GLYDEA M SYSTEM BENEFITS 2.- ARCHITECTS SPECIFICATIONS 3.- DATASHEETS

2 1.- GLYDEA TM SYSTEM. DEFINITION AND BENEFITS Motorized curtain track system. With GLYDEA motorization solutions, make your venue stand out in terms of image, usage and functionality. GLYDEA improves the image of a room and provides a simple solution to install and commission. GLYDEA enhances the level of comfort for users and guests, exceeding expectations. GLYDEA contributes to energy savings and improves security (presence simulation). GLYDEA extends the lifespan of the curtains, preventing damage caused by manual operation GLYDEA TM SYSTEM OVERVIEW GLYDEA 60e High performance GLYDEA motor with 60Kg capacity for a 10m, 2 way straight curtain track. Dry Contact (DCT) control comes as a standard. Infrared (IR) and RTS control options. RS485 control option soon available. Curtain Track Powder coated base spray paint aluminium track. Straight rail up to 10m long (0.5m increments). Wall or ceiling installation options. Curtain weight up to 60kg. Side or central opening. 1.2 GLYDEA TM RANGE BENEFITS Noise Level Low noise level (<44dBA) due to the motor design and the use of a high quality belt. Soft start and stop For an smooth operation, curtain speed progressively increases or decreases when curtain approaches to the side limits. Touch Motion To activate the curtain by simply pulling on the fabric. My Function To automatically bring the curtain to a preferred position. Operation Speed Adjustable speed from 12.5 cm/s to 20cm/s All data subject to change without prior notice 2

3 SOMFY Innovation. Lyrease Technology System Which disengages the motor drive shaft automatically for manual operation, protecting the fabric. End User Accessibility Setting buttons and cabling are obscured from the end user thanks to the cover design. Installation flexibility Left/Right motor installation Motor can be installed on site on either end side of the curtain track. Classic installation Motor is installed below the curtain track on either side. In ceiling motor installation Allows to hide the motor in a false ceiling cavity, providing a perfect match décor. Separated power supply not required Integrated VAC power supply. Swivel Ceiling Bracket Combined to the track rail, allows to minimize the light gap (maximum of 2 mm) between the rail and the ceiling. Adjustable limits To answer to the requirements of each customer, and to allow the curtain to fall nicely when open. Maintenance free No maintenance necessary after installation. GLYDEA is tested for 15 years of operation 5 years warranty International certifications 2011 All data subject to change without prior notice 3

4 2.- ARCHITECTS SPECIFICATIONS SOMFY Glydea 60e VAC supplied direct Drive motor unit, with 3.3 VDC logic circuit, programmable microprocessor and encoder pulse counting; integrated AD/DC adapter, 24V DC motor, precision planetary gears reduction integrating the Lyrease system; a metallic housing with plastic cover architecture; with ctuvus /or CE, TUV GS, CCC, SASO, C tick markings. Allowing: The total hiding of the connectors, the cables and the control modules; manual operation; limit and speed adjustment from 12.5 to 20 cm/s; soft start; soft stop; touch motion to open and to close the curtain by hand pulling; Sound pressure level lower than 44 db(a)*. Motor unit controlled by DCT / SOMFY wireless radio or Infrared controls / RS485. * Average, at 15 c m/s an d according to Somfy sound pressure leve l measurement procedure. 1 Wa y / 2 way Curtain track: with powder coated base spray paint aluminum track, pulley assemblies equipped with a bush bearing, 10 mm T5 PU synchronous toothed belt, with fabric on the teeth and on the back, reinforced by 5 steel cords, rotary eye runners at 10 per m / rotary eye ripple runners at 48/54/60 mm pitch, roller equipped master carrier, and stainless steel overlap arms with roller arm/ Butt arms, fixed on ceiling with one touch/swivel brackets positioned every 500 mm All data subject to change without prior notice 4

5 3.- GLYDEA 60e MOTOR DATASHEET GLYDEA 60e DCT Mechanical characteristics Nominal torque Nm 1.0 Maximum stall torque Nm 1.1 Nominal speed typical rpm 140/122.5/105/87.5 Working temperature C 0 C to +60 C Humidity rate 85% at 35 C Manual operation Type of limit Adjustable limits Duty cycle Intermittent 10 min on/ 20 min off Protection index IP 30 Soft stop Soft start Adjustable speed Noise level (Pressure level) (1) dba 42/38/36/34 (2) Net approx. weight of motor g 1200 Electrical characteristics Voltage range Vac 90 to 255 Frequency range Hz 47 to 63 Maximum current A 0.8 at 120V / 0.4 at 240V Stand by power consumption W 1.2 Power cable type H05 VVF Power cable number of wires 3 Power cable wire section (Ø) mm 2 1 Control connector RJ12 Control method RTS/Infrared/ 2NO or 3NO dry contact Voltage in DCT control line (supplied by the motor) V 3.3 Vdc Maximum voltage drop in control line V 1.2 Minimum contact closure time ms 100 Touch motion Insulation class Class I Maximum running time in one direction min 2 min 30s Standards &Patents Certification and marking Patents CCC,TUV GS, CE, C-TICK, SASO Patents pending (1) Sound pressure level, indicative and according to SOMFY measurement standard (2) Values given at different speed levels All data subject to change without prior notice 5

6 CURTAIN TRACK. MECHANICAL CARACTERISTICS GLYDEA 60e DCT Track mechanical characteristics Average linear speed cm/s 12.5/15.0/17.5/20.0 Weight capacity one straight track kg 60Kg on a 10m straight track Maximum weight per runner kg 1.5 Maximum conflict strength N <150 Maximum track length m 10 Maximum rail junctions qty 2 Rail color RAL White Rail material 6063-T52 AL or 6060-T64 AL Motor position Right and/or left - up or down Type of openings central, side Type of curtain classic, pinch pleat Type of bracket Swivel ceiling, one touch ceiling Patents Patents pending Noise level (complete track) (1) dba 44 (2) (1) Sound pressure level, indicative and according to SOMFY measurement standard (2) At 15cm/s All data subject to change without prior notice 6