» Ingress protection: IP 65 Protection class: II 230 V / 50 Hz Areas of application: pedestrian tunnels, leisure facilities and public baths, changing rooms, parking garages, shopping malls, architectural applications 21.08.2008 Pracht lighting solutions for your requirements 2
»» Slender, shapely waterproof luminaire made of synthetic material with extremely short non-ageing silicone seals» High safety at permanent use» High lighting efficiency through lamp cover with smooth surface and internal prisms, optionally in clear PMMA, clear PC or prachtopal» Easy maintenance at lamp replacement due to retaining and guiding springs made of stainless steel» Quick mounting by means of the Pracht Clip System with variable fixing points» Quick mounting of the lamp covers by means of the Pracht Clip System of the push-fit lampholders» Clips for the push-fit lampholders optionally made of non-ageing high quality synthetic material or made of stainless steel» Captive cover through retaining straps» Optimal T 5 combination of luminaire and lamp» No glass splinters 21.08.2008 Pracht lighting solutions for your requirements 3
»» High chemical resistance» Long durability due to extremely short sealing system made of non-ageing silicone» Mechanical stability when using the lamp cover made of PC» SPECIAL-GRAFFITI-COATING available on request» On request cover available with special coating. Advantages: optimal chemical resistance - yellowing-free scratch-resistant 21.08.2008 Pracht lighting solutions for your requirements 4
» with heat retainer tube Ingress protection: IP 65 Protection class: II 230 V / 50 Hz Areas of application: canopied illumination of facades, open parking garages, canopied exterior entry areas, pedestrian tunnels 21.08.2008 Pracht lighting solutions for your requirements 5
» with heat retainer tube» Slender, shapely waterproof luminaire made of synthetic material with extremely short non-ageing silicone seals» High lighting efficiency through lamp cover with smooth surface and internal prisms, optionally in clear PMMA, clear PC or prachtopal» Easy maintenance at lamp replacement due to retaining and guiding springs made of stainless steel» Quick mounting by means of the Pracht Clip System with variable fixing points» Quick mounting of the lamp covers by means of the Pracht Clip System of the push-fit lampholders» Clips for the push-fit lampholders optionally made of non-ageing high quality synthetic material or made of stainless steel» Captive cover through retaining straps» Optimal T 5 combination of luminaire and lamp» High chemical resistance» Additional photometric optimisation at low environmental temperatures by means of integrated heat retainer tube. 21.08.2008 Pracht lighting solutions for your requirements 6
» Areas of application: industrial illumination with a high illumination level, halls with high lichtpunkthöhen, high-quality, energy saving, efficient project illumination in all sectors 21.08.2008 Pracht lighting solutions for your requirements 7
»» Energy efficient» Very high efficiency» Energy saving through lesser luminaires means» -- lower power input = energy saving» -- shorter mounting times» -- lesser illuminants, therefore lesser disposal costs and therefore» -- lesser environmental impact» Easy cleaning» Directed light» Fluorescent tube is protected against impacts, draughts and low temperatures» Very good cleaning possibilities due to smooth surfaces» Easy retrofitting of Pracht luminaires mounted already for many years» Short, non-ageing seals made of silicone protect durably against moistness and dust 21.08.2008 Pracht lighting solutions for your requirements 8
» Ingress protection: IP 65 Protection class: II 230 V / 50 Hz Areas of application: breweries, foundries, blast furnaces, bakerys, industrial kitchens, sausage brew facilities, areas with high environmental temperatures 21.08.2008 Pracht lighting solutions for your requirements 9
»» VDE / ENEC sign for Tamb = +60 C» Special solutions for higher temperatures on request» Capacious housing volume» Excellent internal temperature characteristics due to an internal heat distribution system» Quick mounting by means of the Pracht Clip System made of stainless steel with variable mounting points» Extremely short seal system made of non-ageing silicone» Lamp covers with closed specular reflectors optionally also available with the latest -technology» Luminaire housing is extremely warp resistant» Fast lamp replacement by means of the stable push-fit lampholder system with short non-ageing silicone seals 21.08.2008 Pracht lighting solutions for your requirements 10
» Ingress protection: IP 68 Protection class: III 24V/DC or 350/700/1050mA/DC Areas of application: illumination of facades, illumination of machines if no refrigerants are used 21.08.2008 Pracht lighting solutions for your requirements 11
»» Tubular luminaire made of impact resistant polycarbonate with 40 mm diameter» Ingress protection IP68/20m» LED luminaire with temperature optimised LED support» High performance LED up to 3 Watt / LED» Diverse LED (colours and output)» Diverse lengths, distances or LED s possible on request 21.08.2008 Pracht lighting solutions for your requirements 12
» Protective tube DD T8 Areas of application: tunnels, parking garages 21.08.2008 Pracht lighting solutions for your requirements 13
» Protective tube DD T8» Protective tubes are being used since many years combined with batten waterproof luminaires and threaded ring lampholders» By means of a constructive optimisation Pracht also offers a safe operation with the easy maintenance push-fit lampholders» Because of a high-precision manufacturing process in the injection moulding company of the prachtgroup, a high ingress protection IP65 is guaranteed. Also with protective tubes optionally made of PMMA, impact resistant PC or prachtopal. 21.08.2008 Pracht lighting solutions for your requirements 14
» Ingress protection: IP 65 Protection class: II 230 V / 50 Hz Areas of application: railway stations, underground stations, areas with difficult maintenance access, exigent architecture 21.08.2008 Pracht lighting solutions for your requirements 15
» Universität» Stable base housing made of diecast aluminium» Optimal heat dissipation due to longitudinal ribs» Variable surface treatment and color on request» Heat distribution management has been considerably improved for the use of the PHILIPS QL lamp system» Optimal operating temperature for maximum luminous flux of the induction lamp at reduced Tc temperatures of the electronic ballast» Result: higher durability of the electronic ballasts» Protection class II construction for the complete system when using a refractor made of synthetic material (Polycarbonate) 21.08.2008 Pracht lighting solutions for your requirements 16
» Continuous mounting system AZOREN T 5 with high ingress protection Ingress protection: IP 54 and IP 65 Protection class: I 230 V / 50 Hz 21.08.2008 Pracht lighting solutions for your requirements 17
New products 2008» Continuous mounting system AZOREN T 5 with high ingress protection» High ingress protection IP 54 / IP 65» Quick mounting of luminaires and covers using the Pracht-Clip- System» Closed specular reflectors sealed by means of an extremely short circular seal system made of non-ageing silicone» Quick mounting of the lamp covers by means of the push-fit lampholder with Quick-Clip-Technique» Through-wiring till max. 2 x 7 x 2,5 mm² with high quality plug-in terminals» Connection system by means of quick mounting plug-in connection» Variable mounting points with marginal deflexion depending on the luminaires mounted» Variable mounting using movable mounting parts» Easy maintenance of the electronic devices due to onesided hinge system» Locking system of the luminaire by means of clips?» Covered services trunking by means of rounded blind covers» Mounting rail and services trunking in one system» Pre-mounted partial lengths, can be delivered to the site ready for connection, fully assembled by us 21.08.2008 Pracht lighting solutions for your requirements 18
Thank you very much for your attention! 21.08.2008 Pracht lighting solutions for your requirements 19