Vertical Machining Centers

Vertical Machining Centers Product line brochure

CAT 40 Belt Drive Spindle 8,000 rpm CAT 40 Direct Drive Spindle VMC 2016 Linear Ways & Box Ways XYZ travel: 20 /16 /18 (510/410/460 mm) 10,000-15,000 rpm (Optional) FEA The Republic Lagun CNC Corp Vertical Machining Centers are all Finite Element Analysis (FEA) designed. The machine structure is optimized for maximum mechanical rigidity but with minimum cast iron material used. Reliable Armless Type ATC Standard with 12 tools Armless type. Armless 20T or Armtype 20T (opt). 5Hp / 7Hp (3.7/ 5.5 Kw) Linear Guideway Box Guideway Axis motors are direct coupled with ball screws, featuring highly efficient motion control, high response and low noise. Hardened Slideways 1

CAT 40 Belt Drive Spindle 8,000 rpm CAT 40 Direct Drive Spindle #40 Built-in Spindle VMC 2418 Linear Ways & Box Ways XYZ travel: 24 /18 /20 (610/460/510 mm) 10,000-15,000 rpm (Optional) 24,000 rpm (Optional) Reliable Armless Type ATC Standard with 16 tools Armless type. Arm type 24T and Armless type 20T optional. Linear Guideway Box Guideway 7 Hp / 10 Hp (5.5 / 7.5 Kw) for Linear/Box Guideway Hardened Slideways 10 Hp / 15 Hp (7.5 / 11 Kw) for Box Guideway (Opt.) 2

VMC 3016 / VMC 4020 Linear Ways & Box Ways VMC 3016 XYZ travel: 33 /20 /22 (850/510/560 mm) VMC 4020 XYZ: 40 /20 /22 (1020/510/560 mm) CAT 40 Belt Drive Spindle 8,000 rpm CAT 40 Direct Drive Spindle 10,000-15,000 rpm (Optional) Armless 16T ATC standard. Armless 20T and Arm Type 24T optional. The front loading / unloading coolant tank with chip auger features space saving, easy chip collection and machine cleaning. VMC 4020 VMC 3016 Cutting Air Blast Coolant shower efficiently removes the cutting chips and the cutting heat. Hardened Slideways The A shaped machine column features extra large conjunction area with this machine base so that the center gravity is lowered. This enhances the cutting stability and damping coefficient as well as achieving a high surface finish of workpieces. 3

VMC 3016 / VMC 4020 Box Ways with Gear Head VMC 3016 XYZ travel: 33 /20 /22 (850/510/560 mm) VMC 4020 XYZ travel: 40 /20 /22 (1020/510/560 mm) CAT 40 Gear Drive Spindle 8,000 rpm Large flow chip flushing function prevents cutting chips from accumulating inside the chip enclosure, bringing heat out of working area. Designed for oil-coolant separation. Hardened Slideways Precision Hand Scraping Every contact sliding surface is applied with Turcite B that maximizes the durability of slideways and features optimum damping coefficient. The mating surface is precision hand scraped to increse the flatnessand improve geometric accuracy of the whole assembly. 4

VMC 4824 Linear Way CAT 40 Belt Drive Spindle 8,000 rpm CAT 40 Direct Drive Spindle 10,000-15,000 rpm (Optional) 10 Hp / 15 Hp (7.5 / 11 Kw) for VMC 2824 Roller type linear guide ways The Linear Motion Guideways feature low friction and free from slick-and-slip problems. These characteristics are especially suitable for high speed 3D cutting and the finish quality of workpiece surface is increased; the need for manual polishing of workpiece surfaces is reduced. Value is originated from Efficiency Topic: M1.0 tapping on square array Tool: Tapper M1.0 P 0.25mm Tapping Speed (max): 6,000rpm/1,250mm/rpm No. of holes: 1024 (32x32) Machining: Rigid tapping Time: 26 57 /1024 (1.68sec/hole) For mold and die makers, an ultra high speed machine to handle deep cavities or to clear small radius corners is the key to avoid expensive EDM processes. 5

VMC 4324 / VMC 5028 Box Ways VMC 4324 XYZ travel: 43 /28 /24 (1100/700/610 mm) VMC 5028 XYZ travel: 51 /28 /28 (1300/700/710 mm) CAT 40 Belt Drive Spindle 8,000 rpm CAT 50 Belt Drive Spindle 6,000 rpm CAT 40 Direct Drive Spindle 10,000-15,000 rpm (Optional) 10 Hp / 15 Hp (7.5 / 11 Kw) for VMC 4324 / 5028 Extra Wide 39 (1,000 mm) 6

VMC 4324-4 / 4324-5 / VMC 5028-4 / 5028-5 Box Ways with Gear Head VMC 4324-4/4324-5 XYZ travel: 43 /28 /28 (1100/700/710 mm) VMC 5028-4/5028-5 XYZ travel: 51 /28 /28 (1300/700/710 mm) CAT 40 Gear Drive Spindle 8,000 rpm CAT 50 Gear Drive Spindle 6,000 rpm Japan Hamada gears 0 grade Counter Balance The maintenance-free counter balance block glides through a guiding bar. The smooth reciprocating motion increases workpiece surface finish especially during high speed cutting. Box Ways with Gear Head High pressure water chip removal 7

VMC 5028 / VMC 6331 Linear Ways VMC 5028 XYZ travel: 51 /28 /28 (1300/700/700 mm) VMC 6331 XYZ travel: 63 /28 /28 (1600/700/700 mm) CAT 40 Belt Drive Spindle 8,000 rpm CAT 50 Belt Drive Spindle 6,000 rpm The sufficient depth from spindle center to machine column not only accommodates 700 mm Y-axis travel but also enables easy access for large diameter facing milling cutter. Double Chip Augers The double chip augers deliver chips out of machine during cutting. Another benefit is to save time in chip removing by the operator. Six Roller Shoes are employed on the machine column that firmly supports the headstock to perform heavy duty cutting. 8 CAT 50, 6000 R.P.M. Spindle (Optional) This type of spindle is ideal for heavy cutting application that results in higher material removal rate. In addition, the spindle also features high precision and low thermal growth. 45 mm. Oversized Ball Screws The VMC 5028/6331 employs high precision fine ground ball screws for optimum motion control accuracy.

VMC 6331 / VMC 8035 Box Ways & Box Ways with Gear Head VMC 6331 XYZ travel: 63 /31 /31 (1600/800/800 mm) VMC 8035 XYZ travel: 79 /35 /31 (2000/900/800 mm) CAT 40 Belt Drive Spindle 8,000 rpm CAT 50 Gear Drive Spindle 6,000 rpm Large flow chip flushing function prevents cutting chips from accumulating inside the chip enclosure, bringing heat out of work area. VMC 6331 15 Hp / 20 Hp (11 / 15 Kw) for VMC 6331 / 8035 4 Slideways VMC 8035 9 Semi guarding (Optional)

VMC 8040 / VMC 8740 Box Ways & Box Ways with Gear Head VMC 8040 / VMC 8740 XYZ travel: 87 /39 /31 (2200/1000/800 mm) CAT 40 Belt Drive Spindle 8,000 rpm CAT 50 Gear Drive Spindle 6,000 rpm Swivel Panel High quality electrical components are adopted in the cabinet. The well oranized wire arrangement is easy for maintenance and service. The swivel operation panel features easy operation; the ergonomic design facilitates easy workpiece set up. The lubrication oil pipe is made of copper instead of plastic or aluminum, featuring long term chemical stability that prevents the oil pipes being clogged - resulting in severe damage caused by slideway lubrication failure. Refrigerated oil is circulated around the spindle to remove heat from the cartridge. It keeps the spindle unit in a stable and constant temperature range. Eventually the cutting accuracy and tool life time is improved. 15 Hp / 20 Hp(11 / 15 Kw) for VMC 8040 6 Slideways 15 Hp / 20 Hp (11 / 15 Kw) for VMC 8740 10 Six Slideways

Optional LHL Vs Oil cost comparison (Every year) Compared to high velocity lubrication oil, the med-pressure grease system uses 90% less oil, and the pump motor consumes 80% less electricity. Spindle Oil Cooler CTS System CTS Filter Type 30 Bar Chain type 32 tools ATC Spindle Coolant System Tool Length Measurement Work Piece Measurement NC Rotary Table Chip Conveyor (Chain Type & Scraper Type) Standard Accessories Rigid tapping RS-232/RJ45 interface Auto power off Auto lubrication LED work light Optional Accessories Program light Heat exchanger for electrical cabinet Full guarding Remote handwheel Leveling bolts & plate Tools & box Operation manual Spindle oil cooler (VHG Series) Spindle oil cooler High pressure coolant flush Air conditioner for electrical cabient Coolant through spindle center Oil skimmer Screw type chip conveyor Chain type chip conveyor Scraper type chip conveyor Oil through tool holder 4th axis CE electrical box DRO Transformer 11

Machine Dimensions TYPE A TYPE B TYPE A VMC 2016 H VMC 2418 H VMC 4324 HG-4 VMC 4324 HG-5 VMC 5028 H VMC 5028 HG-4 VMC 5028 HG-5 A 87 (2,200) 87 (2,200) B 79 (2,000) 85 (2,160) 126 (3,200) 126 (3,200) C 84 (2,140) 89 (2,270) 105 (2,665) 105 (2,665) D 6 (165) 6 (165) 6 (160) 6 (160) E 65 (1,650) 65 (1,650) 65 (1,650) 65 (1,650) F 97 (2,460) 100 (2,550) 121 (3,080) 121 (3,080) G R831 R831 R831 R830 H R653 R653 R768 R768 Unit: in(mm) I 22 (570) 22 (570) 22 (570) 22 (570) TYPE B VMC 3016 VMC 4020 Unit: in(mm) VMC 6331 VMC 8035 VMC 8040 VMC 8740 A 130 (3,300) 137 (3,480) 176 (4,470) B 114 (2,900) 173 (4,400) 217 (5,500) 241 (6,130) C 81 (2,055) 125 (3,170) 129 (3,275) 147 (3,732) D 6 (160) 6 (160) 6 (160) 18 (461) E 65 (1,650) 65 (1,650) 65 (1,650) 67 (1,700) F 112 (2,850) 130 (3,300) 130 (3,300) 144 (3,661) G R831 R981 R981 R981 H R708 R913 R913 R938 I 22 (570) 22 (570) 22 (570) 26 (673) TYPE A Unit: in(mm) VMC 2016 L VMC 2418 L VMC 4824 L A 87 (2,200) B 79 (2,000) 85 (2,160) 136 (3,450) C 84 (2,140) 89 (2,270) 104 (2,645) D 6 (165) 6 (165) 6 (160) E 65 (1,650) 65 (1,650) 65 (1,650) F 97 (2,460) 100 (2,550) 116 (2,950) G R831 R831 R831 H R653 R653 R708 I 22 (570) 22 (570) 24 (600) 12 TYPE B Unit: in(mm) VMC 3016/4020 L VMC 5028 L VMC 6331 L A B 114 (2,900) 144 (3,650) 172 (4,370) C 81 (2,050) 98 (2,490) 98 (2,490) D 6 (160) 22 (556) 22 (556) E 65 (1,650) 67 (1,700) 67 (1,700) F 112 (2,850) 120 (3,050) 120 (3,050) G R831 R831 R831 H R708 R873 R873 I 22 (570) 22 (555) 22 (555)

Table Sizes Linear Ways Unit: in(mm) MODEL A B C D T-slot Q ty VMC 2016 24 (600) 13 (320) 4 (100) 2 (60) 3 VMC 2418 31 (800) 18 (450) 4 (100) 5 (125) 3 VMC 3016 39 (1,000) 20 (500) 4 (100) 2 (50) 5 VMC 4020 47 (1,200) 20 (500) 4 (100) 2 (50) 5 VMC 4824 51 (1,300) 24 (600) 4 (100) 4 (100) 5 VMC 5028 57 (1,450) 28 (700) 5 (125) 4 (100) 5 VMC 6331 69 (1,750) 28 (700) 5 (125) 4 (100) 5 Box Ways Unit: in(mm) MODEL A B C D T-slot Q ty VMC 2016 24 (600) 15 (370) 4 (100) 3 (85) 3 VMC 2418 31 (800) 18 (450) 4 (100) 5 (125) 3 VMC 3016 39 (1,000) 20 (500) 4 (100) 2 (50) 5 VMC 4020 47 (1,200) 20 (500) 4 (100) 2 (50) 5 VMC 4324 51 (1,300) 26 (650) 4 (100) 5 (125) 5 VMC 5028 59 (1,500) 26 (650) 4 (100) 5 (125) 5 VMC 6331 71 (1,800) 33 (840) 6 (150) 6 (140) 5 Pull Stud VMC 8035 87 (2,200) 33 (850) 6 (150) 6 (150) 5 VMC 8040 94 (2,400) 39 (1,000) 6 (150) 2 (50) 7 BT BT-CTS MODEL L L1 L2 L3 L4 L5 D D1 d1 d2 W G Ø BT40 45 60 35 5 28 3 6 15 23 10 17 19 M16 45 MODEL L L1 L2 L3 L4 L5 D D1 d1 d2 W G t Ø BT40 45 Coolant 60 35 5 28 3 6 15 23 10 17 19 M16 4 45 CAT MODEL L L1 L2 D d d1 G Ø L CAT 40 45-A 1.500 0.640 0.440 0.074 0.940 0.490 5/8-11 45 1.500 DIN DIN-CTS MODEL L L1 L2 D d d1 d2 W t DIN69872A-M16 54 26 20 19 23 14 17 19 7.5 MODEL L L1 L2 D d d1 d2 W t DIN69872A-M16 54 26 20 19 23 14 17 19-13

Specifications Linear Ways VMC 2016 VMC 2418 VMC 3016 VMC 4020 Travel X/Y/Z travel 20 / 16 / 18 (510 / 410 / 460 mm) 24 / 18 / 20 (610 / 460 / 510 mm) 33 / 20 / 22 (850 / 510 / 560 mm) 40 / 20 / 22 (1,020 / 510 / 560 mm) X/Y/Z ballscrews C3 1 (C3 32 mm) Spindle nose to table surface 5 ~ 23 (130 ~ 590 mm) 5 ~ 25 (120 ~ 630 mm) 6 ~ 28 (150 ~ 710 mm) 6 ~ 28 (150 ~ 710 mm) Spindle center to column surface (guide way surface) Table Table size Table T-slot (size/q ty/dist) 17 (430 mm) 24 x 13 (600 x 320 mm).55 x 3 x 4 (14 mm x 3 x 100 mm) 22 (553 mm) 31 x 18 (800 x 450 mm).70 x 3 x 4 (18 mm x 3 x 100 mm) 24 (608 mm) 39 x 20 (1,000 x 500 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) 24 (608 mm) 47 x 20 (1,200 x 500 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) Max. table load 661 lb (300 kg) 882 lb (400 kg) 1102 lb (500 kg) 1102 lb (500 kg) Spindle Taper CAT 40 CAT 40 CAT 40 CAT 40 Speed 8,000 RPM 8,000 RPM 8,000 RPM 8,000 RPM Transmission Belt Belt Belt Belt Feed Rate Rapid feed rate of XYZ Axes 1,417 / 1,417 / 1,417 IPM (36 / 36 / 36 m/min) 1,417 / 1,417 / 1,417 IPM (36 / 36 / 36 m/min) 1,417 / 1,417 / 1,417 IPM (36 / 36 / 36 m/min) 1,417 / 1,417 / 1,417 IPM (36 / 36 / 36 m/min) Cutting feed rate Automatic Tool Changer Tool storage capacity Armless 12 (*Armless 20/Arm 20) Armless 16 (*Armless 20/Arm 24) Armless 16 (*Armless 20/Arm 24) Armless 16 (*Armless 20/Arm 24) Max. tool diameter Max. tool length 12 (300 mm) 12 (300 mm) 12 (300 mm) 12 (300 mm) Max. tool weight 13lb (6 kg) 13lb (6 kg) 13lb (6 kg) 13lb (6 kg) CNC Control & Motor CNC control MITSUBISHI(* FANUC/SIEMENS/HEIDENHAIN) Spindle motor 5 / 7 Hp (3.5 / 5.5 kw) 7 / 10 Hp (5.5 / 7.5 kw) 7 / 10 Hp (5.5 / 7.5 kw) 7 / 10 Hp (5.5 / 7.5 kw) Axis motors 2 Hp (1.5 kw) 3 Hp (2 kw) 3 Hp (2 kw) 3 Hp (2 kw) Coolant Pressure 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) Coolant pump 3/4 Hp 3/4 Hp 3/4 Hp 3/4 Hp Coolant tank capacity(l) 180 200 230 230 Air & Power Supply Air source 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Power supply 12 KVA 15 KVA 15 KVA 15 KVA Machine Size Machine dimensions(lxwxh) 79 x 91 x 97 (2,000 x 2,305 x 2,460 mm) 85 x 96 x 100 (2,160 x 2,435 x 2,550 mm) 114 x 95 x 112 (2,900 x 2,420 x 2,850 mm) 114 x 95 x 112 (2,900 x 2,420 x 2,850 mm) Machine net weight (approx.) 6,173 lb (2,800 kg) 8,378 lb (3,800 kg) 11,023 lb (5,000 kg) 11,464 lb (5,200 kg) 14

Specifications Linear Ways VMC 4824 VMC 5028 VMC 6331 Travel X/Y/Z travel X/Y/Z ballscrews Spindle nose to table surface Spindle center to column surface(guide way surface) Table Table size Table T-slot (size/q ty/dist) 47 / 24 / 24 (1,200 / 610 / 610 mm) 6 ~ 30 (150 ~ 760 mm) 28 (717 mm) 51 x 24 (1,300 x 600 mm).70 x 3 x 4 (18 mm x 3 x 100 mm) BT40: 5 ~ 33 (130~830 mm) 51 / 28 / 28 (1,300 / 700 / 700 mm) 57 x 28 (1,450 x 700 mm) BT50: 4 ~ 31 (100~800 mm) (C3 45 mm) 30 (770 mm).70 x 5 x 5 (18 mm x 5 x 125 mm) Max. table load 2,205 lb (1,000 kg) 2,646 lb (1,200 kg) Spindle BT40: 5 ~ 33 (130~830 mm) 63 / 28 / 28 (1,600 / 700 / 700 mm) 69 x 28 (1,750 x 700 mm) BT50: 4 ~ 31 (100~800 mm) Taper CAT 40 CAT 40 CAT 50 CAT 40 CAT 50 Speed 8,000 RPM 8,000 RPM 6,000 RPM 8,000 RPM 6,000 RPM Transmission Belt Belt Feed Rate Rapid feed rate of XYZ Axes 1,417 / 1,417 / 1,417 IPM (36 / 36 / 36 m/min) Cutting feed rate Automatic Tool Changer Tool storage capacity Armless 20 (*Arm 24) Max. tool diameter 1,181 / 1,181 / 945 IPM (30 / 30 / 24 m/min) Armless 20 (*Arm 24) BT40 BT50 Full : 5 (125 mm) BT40 BT50 Full : 5 (125 mm) Next empty: 8 (200 mm) Next empty: 8 (200 mm) Max. tool length 12 (300 mm) 12 (300 mm) 12 (300 mm) Max. tool weight 13 (6 kg) 13lb (6 kg) 33 lb (15 kg) 13lb (6 kg) 33 lb (15 kg) CNC Control & Motor CNC control MITSUBISHI(* FANUC/SIEMENS/HEIDENHAIN) Spindle motor 10 / 15 Hp (7.5 / 11 kw) 10 / 15 Hp (7.5 / 11 kw) Axis motors 3 Hp (2 kw)[z: (3kw) with brake] 5 Hp (3.5 kw)[z: with brake] Coolant Pressure 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) Coolant pump 3/4 Hp 3/4 Hp 3/4 Hp Coolant tank capacity(l) 270 380 490 Air & Power Supply Air source 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Power supply 20 KVA 20 KVA 20 KVA Machine Size Machine dimensions(lxwxh) 136 x 110 x 116 (3,450 x 2,805 x 2,950 mm) 144 x 115 x 120 (3,650 x 2,915 x 3,050 mm) 172 x 115 x 120 (4,370 x 2,915 x 3,050 mm) Machine net weight (approx.) 14,991 lb (6,800 kg) 18,408 lb (8,350 kg) 22,046 lb (10,000 kg) 15

Specifications Box Ways VMC 2016 VMC 2418 VMC 3016 VMC 4020 Travel X/Y/Z travel 20 / 16 / 18 (510 / 410 / 460 mm) 24 / 18 / 20 (610 / 460 / 510 mm) 33 / 20 / 22 (850 / 510 / 560 mm) 40 / 20 / 22 (1,020 / 510 / 560 mm) X/Y/Z ballscrews C3 1 (C3 32 mm) Spindle nose to table surface 5 ~ 23 (130 ~ 590 mm) 5 ~ 25 (130 ~ 640 mm) 6 ~ 28 (150 ~ 710 mm) 6 ~ 28 (150 ~ 710 mm) Spindle center to column surface Table Table size Table T-slot (size/q ty/dist) 19 (470 mm) 24 x 15 (600 x 370 mm).55 x 3 x 4 (14 mm x 3 x 100 mm) 21 (535 mm) 31 x 18 (800 x 450 mm).70 x 3 x 4 (18 mm x 3 x 100 mm) 23 (575 mm) 39 x 20 (1,000 x 500 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) 23 (575 mm) 47 x 20 (1,200 x 500 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) Max. table load 661 lb (300 kg) 882 lb (400 kg) 1,653 lb (750 kg) 1,653 lb (750 kg) Spindle Taper CAT 40 CAT 40 CAT 40 CAT 40 Speed 8,000 RPM 8,000 RPM 8,000 RPM 8,000 RPM Transmission Belt Belt Belt Belt Feed Rate Rapid feed rate of XYZ Axes 944 / 944 / 630 IPM (24 / 24 / 16 m/min) 944 / 944 / 630 IPM (24 / 24 / 16 m/min) 944 / 944 / 630 IPM (24 / 24 / 16 m/min) 944 / 944 / 630 IPM (24 / 24 / 16 m/min) Cutting feed rate Automatic Tool Changer Tool storage capacity Armless 12 (*Armless 20/Arm 20) Armless 16 (*Armless 20/Arm 24) Armless 16 (*Armless 20/Arm 24) Armless 16 (*Armless 20/Arm 24) Max. tool diameter Max. tool length 12 (300 mm) 12 (300 mm) 12 (300 mm) 12 (300 mm) Max. tool weight 13lb (6 kg) 13lb (6 kg) 13lb (6 kg) 13lb (6 kg) CNC Control & Motor CNC control Spindle motor 5 / 7 Hp (3.5 / 5.5 kw) MITSUBISHI(* FANUC/SIEMENS/HEIDENHAIN) 7 / 10 Hp (5.5 / 7.5 kw) 7 / 10 Hp (5.5 / 7.5 kw) 7 / 10 Hp (5.5 / 7.5 kw) Axis motors 2 Hp (1.5 kw) 3 Hp (2 kw) 3 Hp (2 kw) 3 Hp (2 kw) Coolant Pressure 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Coolant pump 3/4 Hp 3/4 Hp 3/4 Hp 3/4 Hp Coolant tank capacity(l) 180 L 200 L 230 L 230 Air & Power Supply Air source 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Power supply 12 KVA 15 KVA 15 KVA 15 KVA Machine Size Machine dimensions(lxwxh) 79 x 91 x 97 (2,000 x 2,305 x 2,460 mm) 85 x 96 x 100 (2,160 x 2,435 x 2,550 mm) 114 x 95 x 112 (2,900 x 2,420 x 2,850 mm) 114 x 95 x 112 (2,900 x 2,420 x 2,850 mm) Machine net weight (approx.) 6,173 lb (2,800 kg) 8,378 lb (3,800 kg) 11,023 lb (5,000 kg) 11,464 lb (5,200 kg) 16

Specifications Box Ways VMC 4324 VMC 5028 VMC 6331 VMC 8035 VMC 8040 Travel X/Y/Z travel X/Y/Z ballscrews Spindle nose to table surface Spindle center to column surface Table Table size Table T-slot (size/q ty/dist) 43 / 28 / 24 (1,100 / 700 / 610 mm) 5 ~ 29 (130 ~ 740 mm) 29 (730 mm) 51 x 26 (1,300 x 650 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) 51 / 28 / 28 (1,300 / 700 / 710 mm) 5 ~ 33 (130 ~ 840 mm) 29 (730 mm) 59 x 26 (1,500 x 650 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) 63 / 31 / 31 (1,600 / 800 / 800 mm) (C3 50 mm) 8 ~ 39 (200 ~ 1,000 mm) 34 (870 mm) 71 x 33 (1,800 x 840 mm).86 x 5 x 6 (22 mm x 5 x 150 mm) 79 / 35 / 31 (2,000 / 900 / 800 mm) (C3 50 mm) 8 ~ 39 (200 ~ 1,000 mm) 38 (975 mm) 87 x 33 (2,200 x 850 mm).86 x 5 x 6 (22 mm x 5 x 150 mm) 79 / 39 / 31 (2,000 / 1,000 / 800 mm) (C3 50 mm) 10 ~ 41 (250 ~ 1,050 mm) 41 (1,050 mm) 94 x 39 (2,400 x 1,000 mm).86 x 7 x 6 (22 mm x 7 x 150 mm) Max. table load 2,205 lb (1,000 kg) 2,205 lb (1,000 kg) 4,850 lb (2,200 kg) 5,511 lb (2,500 kg) 6,613 lb (3,000 kg) Spindle Taper CAT 40 CAT 40 CAT 40 CAT 40 CAT 40 Speed 8,000 RPM 8,000 RPM 8,000 RPM 8,000 RPM 8,000 RPM Transmission Belt Belt Belt Belt Belt Feed Rate Rapid feed rate of XYZ Axes 944 / 944 / 591 IPM (24 / 24 / 15 m/min) Cutting feed rate Automatic Tool Changer Tool storage capacity Armless 20 (*Arm 24 / Chain 32) Max. tool diameter 944 / 944 / 591 IPM (24 / 24 / 15 m/min) Armless 20 (*Arm 24 / Chain 32) 591 / 591 / 472 IPM (15 / 15 / 12 m/min) Armless 24 (*Chain 32) 591 / 591 / 472 IPM (15 / 15 / 12 m/min) Armless 24 (*Chain 32) 591 / 591 / 472 IPM (15 / 15 / 12 m/min) Armless 24 (*Chain 32) Max. tool length 12 (300 mm) 12 (300 mm) 12 (300 mm) 12 (300 mm) 12 (300 mm) Max. tool weight 13 (6 kg) 13lb (6 kg) 13lb (6 kg) 13lb (6 kg) 13lb (6 kg) CNC Control & Motor CNC control MITSUBISHI(* FANUC/SIEMENS/HEIDENHAIN) Spindle motor 10 / 15 Hp (7.5 / 11 kw) 10 / 15 Hp (7.5 / 11 kw) 15 / 20 Hp (11 / 15 kw) 15 / 20 Hp (11 / 15 kw) 15 / 20 Hp (11 / 15 kw) Axis motors 5 Hp (3.5 kw) 5 Hp (3.5 kw) 6/9/6 Hp (4.5/7.0/4.5 kw) 6/9/6 Hp (4.5/7.0/4.5 kw) 9/12/6 Hp (7/9/4.5 kw) Coolant Pressure 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Coolant pump 3/4 Hp 3/4 Hp 3/4 Hp 3/4 Hp 3/4 Hp Coolant tank capacity(l) 270 L 270 L 300 L 300 L 590 L Air & Power Supply Air source 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Power supply 20 KVA 20 KVA 35 KVA 35 KVA 35 KVA Machine Size Machine dimensions(lxwxh) 173 x 130 x 130 217 x 135 x 130 241 x 165 x 144 126 x 111 x 121 (3,200 x 2,825 x 3,080 mm) 126 x 111 x 121 (3,200 x 2,825 x 3,080 mm) (4,400 x 3,300 x 3,300 mm) (5,500 x 3,435 x 3,310 mm) (6,130 x 4,200 x 3,661 mm) Machine net weight (approx.) 19,842 lb (9,000 kg) 20,282 lb (9,200 kg) 31,967 lb (14,500 kg) 35,273 lb (16,000 kg) 5,291 lb (24,000 kg) 17

Specifications Box Ways w/gear Head VMC 3016 VMC 4020 VMC 4324-4 VMC 4324-5 Travel X/Y/Z travel 33 / 20 / 22 (850 / 510 / 560 mm) 40 / 20 / 22 (1,020 / 510 / 560 mm) 43 / 28 / 28 (1,100 / 700 / 710 mm) X/Y/Z ballscrews Spindle nose to table surface 6 ~ 28 (140 ~ 700 mm) 6 ~ 28 (140 ~ 700 mm) 5 ~ 29 (130 ~ 740 mm) Spindle center to column surface Table Table size Table T-slot (size/q ty/dist) 23 (575 mm) 39 x 20 (1,000 x 500 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) 23 (575 mm) 47 x 20 (1,200 x 500 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) 29 (730 mm) 51 x 26 (1,300 x 650 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) Max. table load 1,653 lb (750 kg) 1,653 lb (750 kg) 2,204 lb (1,000 kg) Spindle Taper CAT 40 CAT 40 CAT 40 CAT 50 Speed 8,000 RPM 8,000 RPM 8,000 RPM 6,000 RPM Transmission Gear Head Gear Head Gear Head Feed Rate Rapid feed rate of XYZ Axes 944 / 944 / 630 IPM (24 / 24 / 16 m/min) 944 / 944 / 630 IPM (24 / 24 / 16 m/min) 944 / 944 / 591 IPM (24 / 24 / 15 m/min) Cutting feed rate Automatic Tool Changer Tool storage capacity Armless 16 (*Armless 20/Arm 24) Armless 16 (*Armless 20/Arm 24) Armless 20 (*Arm 24) Arm 24 Max. tool diameter Full : 5 (125 mm) Next empty: 8 (200 mm) Max. tool length 12 (300 mm) 12 (300 mm) 12 (300 mm) 12 (300 mm) Max. tool weight 13lb (6 kg) 13lb (6 kg) 13lb (6 kg) 33lb (15 kg) CNC Control & Motor CNC control Spindle motor 10 / 15 Hp (7.5 / 11 kw) MITSUBISHI(* FANUC/SIEMENS/HEIDENHAIN) 10 / 15 Hp (7.5 / 11 kw) 10 / 15 Hp (7.5 / 11 kw) Axis motors 3 Hp (2 kw) 3 Hp (2 kw) 5 Hp (3.5 kw) Coolant Pressure 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) Coolant pump 3/4 Hp 3/4 Hp 3/4 Hp 3/4 Hp Coolant tank capacity 230 L 230 L 270 L 270 L Air & Power Supply Air source 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Power supply 15 KVA 15 KVA 20 KVA 20 KVA Machine Size Machine dimensions(lxwxh) 114 x 95 x 112 (2,900 x 2,420 x 2,850 mm) 114 x 95 x 112 (2,900 x 2,420 x 2,850 mm) 126 x 111 x 121 (3,200 x 2,825 x 3,080 mm) 126 x 111 x 121 (3,200 x 2,825 x 3,080 mm) Machine net weight (approx.) 11,684 lb (5,300 kg) 12,125 lb (5,500 kg) 20,723 lb (9,400 kg) 20,943 lb (9,500 kg) 18

Note: Specifications are rounded up to the nearest inch. Millimeter measurements are precise in accuracy Images used in this publication are for illustration purposes only, and may show optional features not included with the model. Republic Lagun is not responsible for any printed or typographical errors. Specification are subject to change without notice. Weights and measurements are approximate and may vary. Please contact the plant or distributor for further information. Box Ways w/gear Head VMC 5028-4 VMC 1305-5 VMC 6331-5 VMC 8035-5 VMC 8740-5 Travel X/Y/Z travel X/Y/Z ballscrews Spindle nose to table surface Spindle center to column surface Table Table size Table T-slot (size/q ty/dist) 51 / 28 / 28 (1,300 / 700 / 710 mm) 5 ~ 33 (130 ~ 840 mm) 29 (730 mm) 59 x 26 (1,500 x 650 mm).70 x 5 x 4 (18 mm x 5 x 100 mm) 63 / 31 / 31 (1,600 / 800 / 800 mm) (C3 50 mm) 8 ~ 39 (200 ~ 1,000 mm) 34 (870 mm) 71 x 33 (1,800 x 840 mm).86 x 5 x 6 (22 mm x 5 x 150 mm) 79 / 35 / 31 (2,000 / 900 / 800 mm) (C3 50 mm) 8 ~ 39 (200 ~ 1,000 mm) 38 (975 mm) 87 x 33 (2,200 x 850 mm).86 x 5 x 6 (22 mm x 5 x 150 mm) 87 / 39 / 31 (2,200 / 1,000 / 800 mm) (C3 63 mm) 10 ~ 41 (250 ~ 1,050 mm) 41 (1,050 mm) 94 x 39 (2,400 x 1,000 mm).86 x 7 x 6 (22 mm x 7 x 150 mm) Max. table load 2,205 lb (1,000 kg) 4,850 lb (2,200 kg) 5,511 lb (2,500 kg) 6,613 lb (3,000 kg) Spindle Taper CAT 40 CAT 50 CAT 50 CAT 50 CAT 50 Speed 8,000 RPM 6,000 RPM 6,000 RPM 6,000 RPM 6,000 RPM Transmission Gear Head Gear Head Gear Head Gear Head Feed Rate Rapid feed rate of XYZ Axes Cutting feed rate Automatic Tool Changer Tool storage capacity Max. tool diameter Armless 20 (*Arm 24) 944 / 944 / 591 IPM (24 / 24 / 15 m/min) Arm 24 Full : 5 (125 mm) Next empty: 8 (200 mm) 591 / 591 / 472 IPM (15 / 15 / 12 m/min) Arm 24 (*Chain 32) Full : 5 (125 mm) Next empty: 8 (200 mm) 591 / 591 / 472 IPM (15 / 15 / 12 m/min) Arm 24 (*Chain 32) Full : 5 (125 mm) Next empty: 8 (200 mm) 591 / 591 / 472 IPM (15 / 15 / 12 m/min) Arm 24 (*Chain 32) Full : 5 (125 mm) Next empty: 8 (200 mm) Max. tool length 12 (300 mm) 12 (300 mm) 12 (300 mm) 12 (300 mm) 12 (300 mm) Max. tool weight 13 (6 kg) 33lb (15 kg) 33lb (15 kg) 33lb (15 kg) 33lb (15 kg) CNC Control & Motor CNC control MITSUBISHI(* FANUC/SIEMENS/HEIDENHAIN) Spindle motor 10 / 15 Hp (7.5 / 11 kw) 15 / 20 Hp (11 / 15 kw) 15 / 20 Hp (11 / 15 kw) 15 / 20 Hp (11 / 15 kw) Axis motors 5 Hp (3.5 kw) 6/9/6 Hp (4.5/7.0/4.5 kw) 6/9/6 Hp (4.5/7.0/4.5 kw) 9/9/6 Hp (7.0/7.0/4.5 kw) Coolant Pressure 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) 142 lb/in 2 (10 kg/cm 2 ) Coolant pump 3/4 Hp 3/4 Hp 3/4 Hp 3/4 Hp Coolant tank capacity(l) 270 L 300 L 300 L 590 L Air & Power Supply Air source 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) 85 lb/in 2 (6 kg/cm 2 ) Power supply 20 KVA 35 KVA 35 KVA 35 KVA Machine Size Machine dimensions(lxwxh) 173 x 130 x 130 217 x 135 x 130 241 x 165 x 144 126 x 111 x 121 (3,200 x 2,825 x 3,080 mm) (4,400 x 3,300 x 3,300 mm) (5,500 x 3,435 x 3,310 mm) (6,130 x 4,200 x 3,661 mm) Machine net weight (approx.) 21,164 lb (9,600 kg) 21,384 lb (9,700 kg) 33,069 lb (15,000 kg) 36,376 lb (16,500 kg) 54,013 lb (24,500 kg) 19

PROVIDING SOLUTIONS SINCE 1968 Aircraft & Space Honeywell Aerospace Boeing Company Hughes Aircraft Lockheed Aircraft NASA Northrop Grumman Rockwell Internantional BAE Systems Space X Raytheon Rolls - Royce Bombarier Parker Hannifin United Technologies Bell Helicopter Prat Whytney Computer & Electronic I.B.M General Dynamics Corp Hewlett Packard Corp Honeywell International, Inc. Dell, Inc. Siemens Bosch RexRoth Construction & Farm Machinery Caterpillar Inc. Navistar Insegersoll-Rand Company John Deere Komatsu America Military U.S. Army U.S. Navy U.S. Air Force U.S. Marines U.S. Coast Guard U.S. Department of Defense Others Allied Chemical Dresser Industries Hollymatic Corp. General Electric Company Servo Products Weyerhauser Company Westinghouse Corp. Toyota Motor Corp. Roland Sands Design Educational Institutions Siemens Energy Universities Community Collages We offer a wide range of Machinery Mills Lathes Machining Centers Polishing Machines Gantry / Bridge Type / Routers We would like to take this opportunity to thank you for the loyalty and confidence you have displayed in our products during the past years. We realize that our success is dependent on our continued friendship, satisfaction, & support. Descriptions, specifications and illustrations are subject to change without notice. Always refer to a Lagun Engineering Solution formal quotation. Not responsible for any misprints or typographical errors. Please contact us for more information. 800 Sprucelake Drive, Harbor City, CA. 90710 Phone: 310.518.1100 Toll Free: 800.421.2105 Fax: 310.830.0923 Web: www.lagun.com