: ARLIN - TEXTILE WALLCOVERING

COSTRUZIONI CONSTRUCTION REAZIONE REACTION 1 Nome commerciale Product Name : ARLIN - TEXTILE WALLCOVERING Descrizione : Vedi pagina 2 Description : See page 2 Nome / Name : ARLIN ITALIA S.r.l. Indirizzo / Address : Corso Roma, 12 Città / City : 2724 Cilavegna (PV) Norma Tecnica / Technical standard: EN 1323:21 - Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item Originale cliente Original : Client Originale cliente Original : Client

2 DATI GENERALI / GENERAL DATA: Data ricevimento campioni : Product supply date 23/6/214 Data esecuzione prove / Date of test : 9/7/214 Identificazione delle norme di riferimento : Standard reference identification Identificazione dei metodi di prova : Test method identification EN 1323:21 EN 1323:21 // Campionamento / Sampling : Provette di materiale fornite dal cliente. Specimens supplied by the client. Condizionamento secondo EN 1323 : Conditioning compliing EN 1323 23 C - 5 % u.r. per 336 ore 23 C - 5 % r.h. for 336 hours Procedura normalizzata / Standard procedure : SI / YES Deviazione dai metodi di prova : NO / NO Standard procedure deviation Controllo calcoli / Calculation check : SI / YES CAMPIONI ANALIZZATI / SAMPLES TESTED: 3 provette campione denominate / 3 specimens of sample identified: ARLIN - TEXTILE WALLCOVERING Descrizione... : Tessuto per rivestimenti murali in poliestere FR su supporto in TNT Description... : Polyester on TNT substrate wall covering fabric Massa areica... : 325±3 g/m 2 Mass per area unit... : 325±3 g/m 2 Spessore... : 1,1±,2 mm Thickness... : 1,1±,2 mm Tipo di substrato / Substrate type: Calcio silicato conforme alla EN 1323:21 / Calcium silicate board compliant to EN 1323:21 Allestimento del campione / Specimen mounting and fixing: Costruzione del provino come da EN 1323 par 5.2 d) incollato con colla MT32 della ditta Mapei SpA. Specimen mounting complying to EN 1323 par 5.2 d) glued with MT32 adhesive manufactured by Mapei SpA. CSI organismo notificato 497 CSI Notified body 497

3 DICHIARAZIONE / STATEMENTS: I risultati di prova contenuti nel presente rapporto si riferiscono esclusivamente al campione provato. Test results contained in this test report relate only to specimens tested. Il presente rapporto non può essere riprodotto parzialmente senza l autorizzazione del Responsabile del Centro. The test report shall not be reproduced except in full without the written approval of the Managing Director. I dati tecnici riportati nella descrizione del campione sono desunti dalla scheda tecnica allegata dal cliente al campione di prova. The technical data reported on the specimen description are taken from client technical sheet. I risultati di prova si riferiscono esclusivamente al comportamento dei provini di un materiale nelle particolari condizioni della prova; essi non sono destinati ad essere l unico criterio per la valutazione della pericolosità potenziale del materiale in opera. The test results relate o the behaviour of the test specimens of a product under the particular conditions of the test; they are not intended to be the sole criterion for assessing the potential fire hazard of the product in use. CSI organismo notificato 497 CSI Notified body 497

4 FOTOGRAFIE / PHOTOGRAPHS: Vista frontale ala lunga Long wing front view Angolo verticale esterno dell ala lunga Long wing vertical outer edge CSI organismo notificato 497 CSI Notified body 497

5 RISULTATI / RESULTS: Metodo di prova / Test method EN 1323:21 Identificazione provetta Specimen identification 1 2 3 Media Average.2MJ/.4MJ [W/s] 149,5 a/at 411 s 149,5 a/at 411 s 54, a/at 45 s 54, a/at 45 s 17, a/at 45 s 1,9 a/at 414 s 14, 11,7 [MJ] LFS [Si/Yes No/No] SMOGRA [m 2 /s 2 ] TSP [m 2 ] FDP [No/No - <1s - >1s] 3,1 No/No 9,2 44,6 No/No 1, No/No 7, 42,1 No/No 1,5 No/No 1,9 57,5 No/No 2,1 No/No 9, 4,1 No/No = fire growth rate index = total hest release LFS = lateral flame spread SMOGRA = smoke growth rate index FDP = flaming droplets or particles DATA Date RESP. DIVISIONE Division Head RESP. DEL CENTRO Managing Director Paolo Mele Raoul Gatti CSI organismo notificato 497 CSI Notified body 497

6 SBI Test Report Laboratory: CSI S.p.A. Product: ARLIN - TEXTILE WALLCOVERING Test no. Test date: Print date: 1 9/7/214 9/7/214 Test condition Check points Results Baseline duct temp. (t=3-9) [K] 29.52 HRR av,burner [KW] 31.25 threshold:.2 MJ [W/s] 149.5 Ambient pressure. [Pa] 152 HRR std burner [KW].361 threshold:.4 MJ [W/s] 149.5 Humidity [%] 5 CO 2 /O 2 Ratio burner.4 6 [MJ] * 3.1 SPR av,burner [m²/s] 99 Lateral flame spread (LFS) reach the edge? No k t.42 SPR std burner [m²/s] 9 SMOGRA [cm²/s²] 9.2 k p 1. TSP 6 [m²] * 44.6 E' [KJ/m³] 172 Ambient temp. (t=3-9) [K] 299.26 Flaming droplets/particles (FDP) (flaming <= 1 s)? No Duct diameter: [m].315 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > 1 s)? No Minimum for flow [m³/s].5521 Time to.2 [s] * 111 Maximum for flow [m³/s].594 Time to.4 [s] * 111 Burner response time [s] 12 Tig (2*6KW) [s] * 4 * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2.669 Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 2.9477 End data O 2 [%] 2.931 T-Duct (2.5 K drop from baseline) 319.36 33 Baseline CO 2 (t=3-9) [%] 43 End data CO 2 [%] 46 O2 (5% rise from baseline) 2.6629 39 Baseline light signal (t=3-9) 1442 End data light signal 99.7222 CO2 (2% drop from baseline).1643 312 HRR, and values (Zoom) 2 (W/s) 15. 1 5. 21 26 31 36 41 46-5. 16 14 12 1 6 4 2-2 HRR(3) HRR, and values 2 (W/s) 16 14 15. 12 1 1 6 5. 4 2 2 4 6 1 12 14 16-5. -2 HRR(3) SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s 2.3 7.25 6.2 5.15 4.1 3 5 2 1-5 2 4 6 1 12 14 16 -.1-1 SPR-Prod. SPR(6) TSP SMOGRA CSI organismo notificato 497 CSI Notified body 497

7 SBI Test Report Laboratory: CSI S.p.A. Product: ARLIN - TEXTILE WALLCOVERING Test no. Test date: Print date: 2 9/7/214 9/7/214 Test condition Check points Results Baseline duct temp. (t=3-9) [K] 3.4 HRR av,burner [KW] 31.61 threshold:.2 MJ [W/s] 54. Ambient pressure. [Pa] 1143 HRR std burner [KW].327 threshold:.4 MJ [W/s] 54. Humidity [%] 5 CO 2 /O 2 Ratio burner.413 6 [MJ] * 1. SPR av,burner [m²/s] 69 Lateral flame spread (LFS) reach the edge? No k t.42 SPR std burner [m²/s] 9 SMOGRA [cm²/s²] 7. k p 1. TSP 6 [m²] * 42.1 E' [KJ/m³] 172 Ambient temp. (t=3-9) [K] 3.97 Flaming droplets/particles (FDP) (flaming <= 1 s)? No Duct diameter: [m].315 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > 1 s)? No Minimum for flow [m³/s].662 Time to.2 [s] * 15 Maximum for flow [m³/s].6533 Time to.4 [s] * 15 Burner response time [s] 6 Tig (2*6KW) [s] * 141 * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2.572 Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 2.9529 End data O 2 [%] 2.9511 T-Duct (2.5 K drop from baseline) 32.34 33 Baseline CO 2 (t=3-9) [%] 49 End data CO 2 [%] 55 O2 (5% rise from baseline) 2.659 39 Baseline light signal (t=3-9) 99.9146 End data light signal 9.455 CO2 (2% drop from baseline).1591 312 HRR, and values (Zoom) 12. (W/s) 1. 6. 4. 2. 21-2. 26 31 36 41 46-4. 6 5 4 3 2 1-1 HRR(3) 12. HRR, and values (W/s) 6 1 5. 4 6. 3 4. 2 2. 1 2 4 6 1 12 14 16-2. HRR(3) -4. -1 SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s 2.25 7 6.2 5.15 4.1 3 2 5 1 2 4 6 1 12 14 16-5 -1 SPR-Prod. SPR(6) TSP SMOGRA CSI organismo notificato 497 CSI Notified body 497

SBI Test Report Laboratory: CSI S.p.A. Product: ARLIN - TEXTILE WALLCOVERING Test no. Test date: Print date: 3 9/7/214 9/7/214 Test condition Check points Results Baseline duct temp. (t=3-9) [K] 37.4 HRR av,burner [KW] 31.25 threshold:.2 MJ [W/s] 17. Ambient pressure. [Pa] 1236 HRR std burner [KW].246 threshold:.4 MJ [W/s] 1.9 Humidity [%] 5 CO 2 /O 2 Ratio burner.41 6 [MJ] * 1.5 SPR av,burner [m²/s] 2 Lateral flame spread (LFS) reach the edge? No k t.42 SPR std burner [m²/s] 9 SMOGRA [cm²/s²] 1.9 k p 1. TSP 6 [m²] * 57.5 E' [KJ/m³] 172 Ambient temp. (t=3-9) [K] 3.95 Flaming droplets/particles (FDP) (flaming <= 1 s)? No Duct diameter: [m].315 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > 1 s)? No Minimum for flow [m³/s].669 Time to.2 [s] * 15 Maximum for flow [m³/s].6352 Time to.4 [s] * 114 Burner response time [s] 9 Tig (2*6KW) [s] * 7 * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2.331 Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 2.951 End data O 2 [%] 2.9356 T-Duct (2.5 K drop from baseline) 325.2 36 Baseline CO 2 (t=3-9) [%] 496 End data CO 2 [%] 542 O2 (5% rise from baseline) 2.622 312 Baseline light signal (t=3-9) 99.9 End data light signal 99.931 CO2 (2% drop from baseline).1622 315 HRR, and values (Zoom) 16. (W/s) 14. 12. 1. 6. 4. 2. 21-2. 26 31 36 41 46 12 1 6 4 2-2 HRR(3) HRR, and values 16. (W/s) 12 14. 1 12. 1. 6 6. 4 4. 2 2. -2. 2 4 6 1 12 14 16-2 HRR(3).25 m 2 /s SPR, TSP and SMOGRA values m 2 or cm 2 /s 2 12.2 1.15 6.1 4 5 2 2 4 6 1 12 14 16-5 -2 SPR-Prod. SPR(6) TSP SMOGRA CSI organismo notificato 497 CSI Notified body 497