The final numerical answer given is correct but the math shown does not give that answer.



Similar documents
Answer, Key Homework 6 David McIntyre 1

ME 201 Thermodynamics

The First Law of Thermodynamics

APPLIED THERMODYNAMICS TUTORIAL 1 REVISION OF ISENTROPIC EFFICIENCY ADVANCED STEAM CYCLES

The Second Law of Thermodynamics

a) Use the following equation from the lecture notes: = ( J K 1 mol 1) ( ) 10 L

Physics 5D - Nov 18, 2013

The Second Law of Thermodynamics

UNIT 2 REFRIGERATION CYCLE

Supplementary Notes on Entropy and the Second Law of Thermodynamics

Type: Single Date: Homework: READ 12.8, Do CONCEPT Q. # (14) Do PROBLEMS (40, 52, 81) Ch. 12

How To Calculate The Performance Of A Refrigerator And Heat Pump

FUNDAMENTALS OF ENGINEERING THERMODYNAMICS

18 Q0 a speed of 45.0 m/s away from a moving car. If the car is 8 Q0 moving towards the ambulance with a speed of 15.0 m/s, what Q0 frequency does a

Problem Set 4 Solutions

Chapter 10 Temperature and Heat

6 18 A steam power plant receives heat from a furnace at a rate of 280 GJ/h. Heat losses to the surrounding air from the steam as it passes through

Energy Matters Heat. Changes of State

CHAPTER 7 THE SECOND LAW OF THERMODYNAMICS. Blank

Stirling heat engine Internal combustion engine (Otto cycle) Diesel engine Steam engine (Rankine cycle) Kitchen Refrigerator

Thermodynamics - Example Problems Problems and Solutions

Exergy: the quality of energy N. Woudstra

PERFORMANCE ANALYSIS OF VAPOUR COMPRESSION REFRIGERATION SYSTEM WITH R404A, R407C AND R410A

Problem Set 3 Solutions

We will try to get familiar with a heat pump, and try to determine its performance coefficient under different circumstances.

Specific Heat Capacity and Latent Heat Questions A2 Physics

QUESTIONS THERMODYNAMICS PRACTICE PROBLEMS FOR NON-TECHNICAL MAJORS. Thermodynamic Properties

39 kg of water at 10 C is mixed with 360 kg of ice at -7 C.

Chapter 18 Temperature, Heat, and the First Law of Thermodynamics. Problems: 8, 11, 13, 17, 21, 27, 29, 37, 39, 41, 47, 51, 57

An analysis of a thermal power plant working on a Rankine cycle: A theoretical investigation

2B.1 Chilled-Water Return (and Supply) Temperature B.3 Cooling-Water Supply Temperature / Flow

Thermochemistry. r2 d:\files\courses\ \99heat&thermorans.doc. Ron Robertson

How To Know If A Refrigeration System Is Efficient

MCQ - ENERGY and CLIMATE

Technical Thermodynamics

Problem Set MIT Professor Gerbrand Ceder Fall 2003

Heat and Work. First Law of Thermodynamics 9.1. Heat is a form of energy. Calorimetry. Work. First Law of Thermodynamics.

Energy Conversions I. Unit of measure (most common one) Form Definition Example

Sheet 5:Chapter 5 5 1C Name four physical quantities that are conserved and two quantities that are not conserved during a process.

Lesson. 11 Vapour Compression Refrigeration Systems: Performance Aspects And Cycle Modifications. Version 1 ME, IIT Kharagpur 1

15 THERMODYNAMICS. Learning Objectives

Chapter 4 EFFICIENCY OF ENERGY CONVERSION

Phys222 W11 Quiz 1: Chapters Keys. Name:

Introduction to the Ideal Gas Law

Mohan Chandrasekharan #1

06150 PORVOO, FINLAND Pelican eco ED(D), Pelican eco EDE(D), Pelican eco EDW(D), Pelican eco EDX(D)

APPLIED THERMODYNAMICS. TUTORIAL No.3 GAS TURBINE POWER CYCLES. Revise gas expansions in turbines. Study the Joule cycle with friction.

THE KINETIC THEORY OF GASES

OUTCOME 2 INTERNAL COMBUSTION ENGINE PERFORMANCE. TUTORIAL No. 5 PERFORMANCE CHARACTERISTICS

FXA Candidates should be able to : Define and apply the concept of specific heat capacity. Select and apply the equation : E = mcδθ

Thermodynamics AP Physics B. Multiple Choice Questions

CHAPTER 12. Gases and the Kinetic-Molecular Theory

Condensers & Evaporator Chapter 5

HEAT PUMPS A KEY COMPONENT IN LOW CARBON FUTURE

CHAPTER 14 THE CLAUSIUS-CLAPEYRON EQUATION

Development of a model for the simulation of Organic Rankine Cycles based on group contribution techniques

C H A P T E R T W O. Fundamentals of Steam Power

Chapter 8 Maxwell relations and measurable properties

Chapter 18 Homework Answers

Fundamentals of THERMAL-FLUID SCIENCES

DET: Mechanical Engineering Thermofluids (Higher)

CO MPa (abs) 20 C

ES-7A Thermodynamics HW 1: 2-30, 32, 52, 75, 121, 125; 3-18, 24, 29, 88 Spring 2003 Page 1 of 6

How to choose a heat pump and use it wisely

Forms of Energy. Freshman Seminar

Hybrid (Dual Fuel) - Gas Heat and Air Source Heat Pump

Chapter 7 Energy and Energy Balances

SOLAR COOLING WITH ICE STORAGE

Statistical Mechanics, Kinetic Theory Ideal Gas. 8.01t Nov 22, 2004

Chapter 10: Temperature and Heat

The first law: transformation of energy into heat and work. Chemical reactions can be used to provide heat and for doing work.

Measurement And Application of Performance Characteristics Of A Free Piston Stirling Cooler

Chapter 2 Classical Thermodynamics: The Second Law

Chapter 3.4: HVAC & Refrigeration System

Chapter 6 The first law and reversibility

OPTIMAL DESIGN AND OPERATION OF HELIUM REFRIGERATION SYSTEMS *

HEAT UNIT 1.1 KINETIC THEORY OF GASES Introduction Postulates of Kinetic Theory of Gases

Thermodynamics /15 Stirling engine. Applied Thermodynamics. What you need:

1. Thermite reaction 2. Enthalpy of reaction, H 3. Heating/cooling curves and changes in state 4. More thermite thermodynamics

The Fundamentals of Thermoelectrics

Energy and Society. Professor Ani Aprahamian

DE-TOP User s Manual. Version 2.0 Beta

Solar and Hydroelectric Power. Abbie Thill Becca Mattson Grace Nordquist Keira Jacobs Miyabi Goedert

Energy Conservation: Heat Transfer Design Considerations Using Thermodynamic Principles

Chapter 1 Classical Thermodynamics: The First Law. 1.2 The first law of thermodynamics. 1.3 Real and ideal gases: a review

Testing methods applicable to refrigeration components and systems

atm = 760 torr = 760 mm Hg = kpa = psi. = atm. = atm. = 107 kpa 760 torr 1 atm 760 mm Hg = 790.

REFRIGERATION (& HEAT PUMPS)

ENERGY CLIMATE PROBLEMS - SOLUTIONS

Engineering Problem Solving as Model Building

Air-sourced 90 Hot Water Supplying Heat Pump "HEM-90A"

Freezing Point Depression: Why Don t Oceans Freeze? Teacher Advanced Version

Gravitational Potential Energy

International Journal of Latest Research in Science and Technology Volume 4, Issue 2: Page No , March-April 2015

Chemistry B11 Chapter 4 Chemical reactions

Availability. Second Law Analysis of Systems. Reading Problems , 10.65, 10.66, , 10.75, 10.81, 10.

Thermochemical equations allow stoichiometric calculations.

PERFORMANCE EVALUATION OF NGCC AND COAL-FIRED STEAM POWER PLANTS WITH INTEGRATED CCS AND ORC SYSTEMS

Diesel Cycle Analysis

So T decreases. 1.- Does the temperature increase or decrease? For 1 mole of the vdw N2 gas:

Transcription:

Note added to Homework set 7: The solution to Problem 16 has an error in it. The specific heat of water is listed as c 1 J/g K but should be c 4.186 J/g K The final numerical answer given is correct but the math shown does not give that answer.

Answer, Key Homework 7 David McIntyre 1 This print-out should have 22 questions, check that it is complete. Multiple-choice questions may continue on the next column or page: find all choices before making your selection. The due time is Central time. Chapter 22 problems. 001 (part 1 of 2) 0 points A heat engine absorbs 362 J of thermal energy and performs 27.2 J of work in each cycle. Find the efficiency of the engine. Correct answer: 0.0751381. Given : Q h 362 J and W 27.2 J The thermal efficiency of a heat engine is e W Q h 27.2 J 362 J 0.0751381. 002 (part 2 of 2) 0 points Find the thermal energy expelled in each cycle. Correct answer: 334.8 J. The work done by a heat engine through a cyclic process ( U 0) is W Q h Q c Q c Q h W 334.8 J. 003 (part 1 of 3) 4 points of a system that absorbs 555 cal of thermal energy while doing 580 J of external work. Correct answer: 1743.23 J. Given : Q 555 cal and W 580 J. According to the first law of thermodynamics, we have U Q W where Q is the thermal energy transferred into the system and W is the work done by the system. Then we have U 555 cal 4.186 J cal 1743.23 J. 580 J 004 (part 2 of 3) 3 points of a system that absorbs 769 cal of thermal energy while 626 J of external work is done on the system. Correct answer: 3845.03 J. U Q ( W ) 769 cal 4.186 J cal 3845.03 J. + 626 J 005 (part 3 of 3) 3 points of a system that is maintained at a constant volume while 1270 cal is removed from the system. Correct answer: 5316.22 J. Since the volume is maintained constant W P V 0 U Q 1270 cal 4.186 J cal 5316.22 J. 006 (part 1 of 2) 0 points An ideal gas is compressed to half its original volume while its temperature is held constant.

Answer, Key Homework 7 David McIntyre 2 If 750 J of energy is removed from the gas during the compression, how much work is done on the gas? Correct answer: 750 J. Given : Q 750 J. According to the first law of thermodynamics, U Q W, where Q is the thermal energy transferred into the system and W is the work done by the system. Since U 0, then Thus Q h W eff P t 1 T c (126 kw) (3600 s) 1 289 K 928 K 6.58749 10 8 J. W Q 750 J. 007 (part 2 of 2) 0 points What is the change in the internal energy of the gas during the compression? Correct answer: 0 J. If the temperature remains constant, U 0 J. 008 (part 1 of 2) 5 points A Carnot engine has a power output of 126 kw. The engine operates between two reservoirs at 16 C and 655 C. How much thermal energy is absorbed per hour? Correct answer: 6.58749 10 8 J. Given : P 126 kw, 655 C 928 K, T c 16 C 289 K. The efficiency of heat engine is eff W Q h 1 T c and the work done by the system is W P t. and 009 (part 2 of 2) 5 points How much thermal energy is lost per hour? Correct answer: 2.05149 10 8 J. The work done by a heat engine through a cyclic process ( U 0) is Then W Q h Q c. Q c Q h W Q h P t (6.58749 10 8 J) (126 kw) (3600 s) 2.05149 10 8 J. W KW 010 (part 1 of 2) 0 points A steam engine is operated in a cold climate where the exhaust temperature is 26 C. Calculate the theoretical maximum efficiency of the engine using an intake steam temperature of 114 C. Correct answer: 0.361757. Given : 114 C 387 K and T c 26 C 247 K.

Answer, Key Homework 7 David McIntyre 3 According to Carnot s theorem, the theoretical maximum efficiency is e 1 T c 1 247 K 387 K 0.361757. 011 (part 2 of 2) 0 points If, instead, superheated steam at 286 C is used, find the maximum possible efficiency. Correct answer: 0.55814. 286 C 559 K The maximum efficiency is e 1 247 K 559 K 0.55814. 012 (part 1 of 1) 0 points The efficiency of a 840 MW nuclear power plant is 27.2%. If a river of flow rate 3.84 10 6 kg/s were used to transport the excess thermal energy away, what would be the average temperature increase of the river? Correct answer: 0.1394 C. Given : P output 840 MW 10 6 W and e 27.2% 0.272. The excess thermal energy transported per second by the river is P excess P input (1 e) ( ) Poutput (1 e) e ( ) 840 MW (1 0.272) 0.272 2248.24 MW where e is efficiency and P output is power output of the plant. Then the temperature of the river is increased (per second) by dm dt c T dq dt P excess where c is heat capacity of water and dm is dt flow rate of the water. Thus T P excess 3.84 10 6 kg/s 0.1394 C. 013 (part 1 of 2) 0 points A house loses thermal energy through the exterior walls and roof at a rate of 4860 W when the interior temperature is 20.1 C and the outside temperature is 0.2 C. Calculate the electric power required to maintain the interior temperature at T i for the following two cases: The electric power is used in electric resistance heaters (which convert all of the electricity supplied to thermal energy). Correct answer: 4860 W. Given : Q/ t 4860 W, T i 20.1 C, T o 0.2 C. and Since all the electricity supplied is converted to thermal energy, we have Thus Q t E t P El P El 4860 W. 014 (part 2 of 2) 0 points The electric power is used to operate the compressor of a heat pump (which has a coefficient of performance equal to ν 0.7 of the Carnot cycle value). Correct answer: 480.86 W.

Answer, Key Homework 7 David McIntyre 4 For a heat pump we have T i (COP ) Carnot T i T o 20.1 C + 273 K 20.1 C ( 0.2 C) 14.4384 Hence to bring 4860 W of heat in the house requires only P h Q/ t (COP ) actual W 0.6 (COP ) carnot 4860 W (0.7) (14.4384) 480.86 W. 015 (part 1 of 1) 0 points An ice tray contains 375 g of water at 0 C. Calculate the change in entropy of the water as it freezes completely and slowly at 0 C. Correct answer: 457.418 J/K. Given : m 375 g 0.375 kg, L 333000 J/kg, and T 0 C 273 K. In the freezing process T is constant, so Q m L where m is mass of water, and l is latent heat of fusion. Thus S Q T m L T (0.375 kg)(333000 J/kg) 273 K 457.418 J/K. Given : T i 15.8 C 288.8 K, T f 80.5 C 353.5 K, m 210 g, and c 1 J/g K. The heat absorbed in the process is dq r m c dt. The change in entropy in an arbitrary reversible process between an initial state and final state is S f i f i ds m c dt T m c log T f T i f i dq r T (210 g) (1 J/g K) log 177.701 J/K. ( ) 353.5 K 288.8 K 017 (part 1 of 6) 2 points One mole of an ideal monatomic gas is taken through the cycle abca shown schematically in the diagram. State a has volume V a 0.0159 m 3 and pressure P a 121000 Pa, and state c has volume V c 0.0526 m 3. Process ca lies along the T 231±1 K isotherm. The molar heat capacities for the gas are c p 20.8 J/mol K and c v 12.5 J/mol K. p ( 10 5 Pa) 1.5 1.2 0.9 250 K a b 016 (part 1 of 1) 10 points Calculate the change in entropy of 210 g of water heated slowly from 15.8 C to 80.5 C. Correct answer: 177.701 J/K. 0.6 0.3 0 0 c 250 K 17 34 51 68 85 V ( 10-3 m 3 )

Answer, Key Homework 7 David McIntyre 5 This schematic plot is intended to give an example of a P V diagram (not to scale). Use the values of P, V, and T given above. Determine the temperature T b of state b. Correct answer: 765.485 K. Given : P b 121000 Pa, V b 0.0526 m 3, and T b 8.31447 J/mol K. We use the ideal gas equation T P V n R, where P is the pressure, V is the volume (both evaluated at b ), R is the molar gas constant, and n is the number of moles. T b P V R (121000 Pa) (0.0526 m3 ) 8.31447 J/mol K 765.485 K. 018 (part 2 of 6) 2 points Determine the heat Q ab added to the gas during process ab. Correct answer: 11109.1 J. For state a Given : P a 121000 Pa, V a 0.0159 m 3, and T a 8.31447 J/mol K. T a P V R (121000 Pa) (0.0159 m3 ) 8.31447 J/mol K 231.392 K Thus Q n c p T (1 mol)(20.8 J/mol K) (765.485 K 231.392 K) 11109.1 J, where Q is the heat transferred, n is the number of moles, c p is the the molar heat capacity for a constant pressure process (such as process ab ), and T is the change in temperature from a to b. 019 (part 3 of 6) 2 points U ab U b U a. Correct answer: 6668.43 J. In an isobaric process the change in internal energy is given by U ab Q ab W Q ab P V Q ab P [V b V a ] 11109.1 J (121000 Pa) (0.0526 m 3 0.0159 m 3 ) 6668.43 J, 020 (part 4 of 6) 2 points Determine the work W bc done by the gas on its surroundings during process bc. Correct answer: 0. W P V and V 0, so W 0. 021 (part 5 of 6) 1 points The net heat added to the gas for the entire cycle is 2140 J. Determine the net work done by the gas on its surroundings for the entire cycle. Correct answer: 2140 J. Given : Q 2140 J. For a complete cycle the change in internal energy U is zero, so W Q 2140 J.

The work is simply the net heat added to the gas. 022 (part 6 of 6) 1 points Determine the efficiency Eff of a Carnot engine that operates between the maximum and minimum temperatures in this cycle. Correct answer: 0.697719. The Carnot efficiency Eff is given by Eff 1 T c. The maximum temperature is clearly that of state b, determined to be 765.485 K in question 1. The minimum temperature will be that of the isotherm, 231.392 K. Therefore Eff 1 T a T b 1 231.392 K 765.485 K 0.697719. Answer, Key Homework 7 David McIntyre 6