Welcome to Remote Access for Lawson-Infor Employee Self Service! General Overview: Remote Access provides LRH employees with the ability to access Lawson Employee Self Service (ESS) from home. You are provided with the same functionality as currently available when accessing Lawson ESS from a computer on LRH property. Remote access is limited to Employee Self Service and does not include other Lawson modules such as Manager Self Service (MSS) or Requisition Self Service (RSS). Printing capability (for Windows only) is also provided by installing the remote printing client on your home computer. Please be aware that it is not be the responsibility of Information Services to support and troubleshoot an employee s home computer or printing issues. Remote access is being offered as a service to our employees. Should you encounter issues with installing or using remote access, it is recommended that you use an on-site LRH computer to access ESS. If you encounter logon issues with your username or password, please contact the IS Help Desk at ext. 4357 for assistance. Using Remote Access: For first-time users, please refer to the First-Time User section on page 3 for instructions to perform the necessary file downloads and installation (this will differ based on the type of web browser you use at home). After completing the initial install, follow the instructions below for all subsequent use of remote access. On your home computer, open your web browser and go to: https://ess.lrmc.com Enter your LRH Active Directory username and password and press Log On Click on LRMC ESS on the Applications screen: At the Lawson-Infor login screen enter your 6-digit employee ID (with leading zeroes) as the User Name and enter your password and press Login: 8/23/2016 Page 1
You will now be presented with the Lawson screen and see your available Bookmarks just as you would see when accessed from a computer onsite at LRH. From here, you can access all of the same information and functions within Lawson just as you would when onsite. When completed, exit out of Lawson-Infor application. Close your web browser. First-Time User: For first-time users, you must perform the necessary file downloads and installation to your home computer. This will vary based on the type of web browser you are using. This works best if you are using Internet Explorer, but can be accessed through the other web browsers mentioned below. Please note that this is intended to be used outside of the LRH network. If you want to enable printing, you must install the remote printing client (printing is only available for Windows). For Internet Explorer, see page 4. For Google Chrome, see page 7. For FireFox, see page 10. For Safari, see page 13. For Installing the Printer Client, see page 16. 8/23/2016 Page 2
Internet Explorer On your home computer, open your web browser and go to: https://ess.lrmc.com Enter your LRH Active Directory username and password and press Log On If you are prompted about checking the System Configuration on your Device, o Click Skip Check If you are prompted to Download the client o Check the box and Click Download o On the download window Click Run o If you are asked if you want to run the software Click Yes 8/23/2016 Page 3
o The client install will then run. o When the client is done Click Ok o You will then be presented all of your applications. Click on LRMC ESS o If a message displays Internet Explorer webpage could or there is just a gray\blank screen, when trying to launch LRMC ESS icon. Go to Tools (located on Internet Explorer menu bar(file, Edit, and etc.) and Compatibility View Settings and in the Add this website: column, Add lrmc.com. Refresh Internet Explorer and then LRMC ESS should display the Lawson Infor sign-on window. 8/23/2016 Page 4
o If you need to install the client manually or to install the printing client after logon, click on the Messages tab at the top of the screen. o You want to click on either the Citrix Web Client for Windows or the Mac Client for Macintosh. For printing in windows click on the Printing Client. o Click on the client and install as shown in the instructions above for the ICA Client install. 8/23/2016 Page 5
Google Chrome On your home computer, open your web browser and go to: https://ess.lrmc.com Enter your LRH Active Directory username and password and press Log On If you are prompted about checking the System Configuration on your Device, o Click Skip Check If you are prompted to Download the client o Check the box and Click Download o When you click to Download the client, you will get a message : 8/23/2016 Page 6
o Then Click on the client download in the download bar at the bottom of the screen: o Click Yes to Start the install. o When the client is done Click Ok o Then Click Continue on the client Installation message: o You will then be presented all of your applications. Click on LRMC ESS 8/23/2016 Page 7
o If you need to install the client manually or to install the printing client after logon, click on the Messages tab at the top of the screen. o You want to click on either the Citrix Web Client for Windows or the Mac Client for Macintosh. For printing in windows click on the Printing Client. o Click on the client and install as shown in the instructions above for the ICA Client install. 8/23/2016 Page 8
FireFox On your home computer, open your web browser and go to: https://ess.lrmc.com Enter your LRH Active Directory username and password and press Log On If you are prompted about checking the System Configuration on your Device, o Click Skip Check If you are prompted to Download the client o Check the box and Click Download o When you click to download the Client you will get a message : o Then Click Save File in the download window 8/23/2016 Page 9
o In the download window Double Click the client download o Click Yes to Start the install. o When the client is done Click Ok o Then Click Continue on the client Installation message o You will then be presented all of your applications. 8/23/2016 Page 10
Click on LRMC ESS o If you need to install the client manually or to install the printing client after logon, click on the Messages tab at the top of the screen. o You want to click on either the Citrix Web Client for Windows or the Mac Client for Macintosh. For printing in windows click on the Printing Client. o Click on the client and install as shown in the instructions above for the ICA Client install. 8/23/2016 Page 11
Safari On your home computer, open your web browser and go to: https://ess.lrmc.com Enter your LRH Active Directory username and password and press Log On If you are prompted about checking the System Configuration on your Device, o Click Skip Check If you are prompted to Download the client o Check the box and Click Download o When you click to download the Client you will get a message : 8/23/2016 Page 12
o Then Click Run in the download window, then Run again, then Yes. o When the client is done Click Ok o Then Click Continue on the client Installation message o You will then be presented all of your applications. Click on LRMC ESS 8/23/2016 Page 13
o If you need to install the client manually or to install the printing client after logon, click on the Messages tab at the top of the screen. o You want to click on either the Citrix Web Client for Windows or the Mac Client for Macintosh. For printing in windows click on the Printing Client. o Click on the client and install as shown in the instructions above for the ICA Client install If you have Safari running on a Macintosh o Download the.dmg file for the version of the plug-in. This runs the Disk Utility program, which mounts the file as a disk image accessible from your Macintosh desktop. o On the Introduction page, click Continue. o On the License page, click Continue. o Click Agree to accept the terms of the License Agreement. o On the Destination Select page, select the volume where you want to install the plug-in and click Continue. o On the Installation Type page, click Install. o Enter the administrator account details for the device on which you are installing the plug-in and click OK. 8/23/2016 Page 14
Installing the Printer Client (Windows Only) On your home computer, open your web browser and go to: https://ess.lrmc.com Enter your LRH Active Directory username and password and press Log On To install the printing client after logon click on the Messages tab at the top of the screen: For printing in windows click on the Printing Client: When the client download comes up click on Run: Then Click Run again on the security warning: 8/23/2016 Page 15
When the installer starts click Next: On the Destination Folder click Next On the Setup Type click Next On the Ready to Install click Next, the program will now install When the Install is complete click Finish: Note: You must install this before you connect to the Desktop or your printers will not appear until you reboot. 8/23/2016 Page 16
Downloading Citrix Plugin for WINDOWS 8 or 10 (Only) Go to the Windows Store or website: https://www.citrix.com/downloads/citrix-receiver/windows-8- rt/receiver-for-windows-8rt.html. Then Select download Citrix Receiver: Place the mouse arrow on Downloads and choose Citrix Receiver (ICA) for the product and Receiver for Windows for the download type. Once the installation is complete, reboot your device. After your device comes back up, you can open the browser of your choice to access hospital systems remotely. For ESS, go to https://ess.lrmc.com. At the Citrix login screen, enter the same login credentials that you use at LRH to access ESS, API, or Cerner. The Citrix applications menu screen, there will be a LRMC ESS icon to Click. Please allow up to 30 seconds for the ESS screen to appear. Depending on your security settings, you may see a message similar to this: Choose Open to launch the selected application. 8/23/2016 Page 17