Board Mount Connector Footprint Design Process STEP 1: Connector Selection Series Force to Engage (Max) Max SB LD FD Freq. SMP 2.0 lbs 10 lbs 15 lbs 40 GHz SMPM 3.5 lbs N/A 8.0 lbs 65 GHz SMPS 3.0 lbs N/A 4.0 lbs 100 GHz Select connector series and type based on performance requirements and packaging constraints Example Connector Selection: 2X.113 2.87 Series Force to Disengage (Min) SB LD FD SMP 8 oz 2.0 lbs 5.0 lbs SMPM 10 oz N/A 3.0 lbs SMPS 7 oz N/A 2.0 lbs.111 2.82 4X.075 1.91 2X.012 0.29 Series Mating Cycles (Min) SB LD FD SMP 1000 500 100 SMPM 500 N/A 100 SMPS 500 N/A 100 4X.020 0.51.130 3.30.215 5.46.255 6.48.085 2.16.125 3.18 SB = Smooth Bore, LD = Limited Detent, FD = Full Detent STEP 2: PCB Definition Foil Surface Layer E1 2.10 MIL Megtron 6 Layer 6.57 MIL Foil Reference Layer E2 1.60 MIL PCB Side View All other layers Provide PCB Characteristics to the SV Microwave Team to begin simulation and optimization (see pages 15 & 16 for more information) 2
Board Mount Connector Footprint Design Process STEP 3: Footprint Design.085±.002 2.16±0.05 2X.028 0.71 MOUNTING THRU HOLES 13X.018 0.46 PLATED THRU HOLES.060 1.52.060 1.52.085±.002 2.16±0.05.022 0.56.050 1.27 TYP..050 1.27 TYP. 2X.028 0.71 FOIL REFERENCE LAYER E2 2X.012 0.30 SV Engineering develops customized PCB launch footprint based on design parameters of connector and PCB materials STEP 4: Simulation and Optimization VSWR Improvement over connector launch with Successive Design Iterations TDR Improvement over connector launch with Successive Design Iterations 3
Simulated vs. Measured Test Results Simulated VSWR for cabled connector launching to PCB closely matches lab tested results Thru-Hole SMP matched to Co-planar Waveguide in simulation software Surface Mount SMPM matched to Co-planar Waveguide in simulation software 1.50 1.50 1.45 Measured 1.45 Measured 1.40 Simulated 1.40 Simulated 1.35 1.35 1.30 1.30 VSWR 1.25 VSWR 1.25 1.20 1.20 1.15 1.15 1.10 1.10 1.05 1.05 1.00 0 2 4 6 8 10 12 14 16 18 20 1.00 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) Simulated vs. Measured Results for Thru-Hole SMP Simulated vs. Measured Results for Surface Mount SMPM Electrical current loss through the launch minimized by matching trace and grounding pads to RF connector to ensure 50 ohm impedance throughout the system 4
SMP Series Board Mount Connectors SMP Edge Launch Male 1211-66139 SB 1211-66138 LD 1211-66137 FD 1211-66175* CM * Note: Dimensions on Catchers Mitt do not match image shown in catalog SMP 2 Port Edge Launch Male 9311-60033 SB 9311-60034 LD 9311-60035 FD SMP 4 Port Edge Launch Male 9311-60036 SB 9311-60037 LD 9311-60038 FD 5
SMP Series Board Mount Connectors SMP Thru-Hole Male with Right Angle Contact SF1211-40002 SF1211-40006 SF1211-40007 Detent SB LD FD SMP 2 Port Thru-Hole Male with Right Angle Contact 9311-40007 SB 9311-40008 LD 9311-40009 FD SMP 4 Port Thru-Hole Male with Right Angle Contact 9311-40010 SB 9311-40011 LD 9311-40012 FD 6
SMP Series Board Mount Connectors SMP Thru-Hole Male with Right Angle Body SMP 2 Port Thru-Hole Male with Right Angle Body SF1212-6002 SF1212-6001 SF1212-6000 Detent SB LD FD SMP 4 Port Thru-Hole Male with Right Angle Body SF9312-40002 SF9312-40003 SF9312-40004 Detent SB LD FD SF9312-60004 SF9312-60005 SF9312-60006 Detent SB LD FD 7
SMP Series Board Mount Connectors SMP Edge Launch Male (custom PCB thickness) 1285-6004 SB 1285-6003 LD 1285-6002 FD SMP Surface Mount Male with Right Angle Contact 1211-40001 SB 1211-40004 LD 1211-40003 FD SMP Thru-Hole Male SF1211-6045 SF1211-6044 SF1287-6001 Detent SB LD FD 8
SMPM Series Board Mount Connectors SMPM Edge Launch Male 3285-6001 FD 3211-60035 SB SMPM 2 Port Edge Launch Male 3211-60086 SB 3211-60087 FD SMPM 4 Port Edge Launch Male 9311-60015 SB 9311-60039 FD 9
SMPM Series Board Mount Connectors SMPM Thru-Hole Male with Right Angle Body 3212-40002 FD 3212-40003 SB SMPM 2 Port Thru-Hole Male with Right Angle Body SF9312-40005 SF9312-40006 Detent SB FD SMPM 4 Port Thru-Hole Male with Right Angle Body SF9312-40007 SF9312-40008 Detent SB FD 10
SMPM Series Board Mount Connectors SMPM Thru-Hole Male with Right Angle Contact SF3211-60033 SF3211-60034 Detent FD SB SMPM 2 Port Thru-Hole Male with Right Angle Contact 9311-40013 SB 9311-40014 FD SMPM 4 Port Thru-Hole Male with Right Angle Contact 9312-40009 SB 9312-40010 FD 11
SMPM Series Board Mount Connectors SMPM Thru-Hole Female (Compliant Pin) 3286-4100 SMPM Surface Mount Male with Right Angle Contact 3287-6100 FD 3287-6101 SB SMPM Thru-Hole Male 3287-4100 FD 3287-4101 SB 12
Hermetic Board Mount Connectors SMP Surface Mount Male with Glass Seal 1211-66176 SB 1211-66177 LD 1211-66178 FD SMPM Surface Mount Male with Glass Seal 3211-60088 SB 3211-60089 FD SMPS Surface Mount Male with Glass Seal 3811-60005 SB 3811-60006 FD 13
SMPS Series Board Mount Connectors SMPS Surface Mount Male with Loose Contact 3811-40005 SB 3811-40006 FD SMPS Edge Launch Male.090 2.29 3X.041 1.04.123 3.12 2X.043 1.09 2X.008 0.20 3811-40004 SB 3811-40003 FD SMPS Surface Mount Male 3811-40023 SB 3811-40022 FD 14
Board Mount Connector Spec Request Form (Additional Copies Available on Website) www.svmicrowave.com 2400 Centrepark West Drive, Suite 100 West Palm Beach, FL 33409 Phone: (561) 840-1800 Fax: (561) 842-6277 www.svmicrowave.com 15
Board Mount Connector Spec Request Form www.svmicrowave.com 2400 Centrepark West Drive, Suite 100 West Palm Beach, FL 33409 Phone: (561) 840-1800 Fax: (561) 842-6277 www.svmicrowave.com 16