PHASE SHIFT DUPLEXERS

Transcription

1 -PORT WAVEGUIDE DIFFERENTIAL PHASE SHIFT CIRCULATORS (DUPLEXERS) AVERAGE POWER KW 00 0 DIFFERENTIAL PHASE SHIFT DUPLEXERS WAVEGUIDE TECHNOLOGY COAXIAL TECHNOLOGY FREQUENCY GHz General description Designed for use in both high-peak and high-mean power applications, TEMEX COMPONENTS differential phase shift circulators offer high isolation while maintaining low-insertion loss. These ruggedly constructed circulators can operate under the most severe environmental conditions, according to MIL-SPEC. The addition of specific heat sinks, or liquid cooling jackets increases mean power handling; for example, of up to 00 kw-cw at.50 GHz. Casting techniques can be used for pressurized waveguide in order to reduce leakage and weight, especially for airborne radars. In-house ferrite materials facilities, computer-aided design, and experienced research and development teams, allow TEMEX COMPONENTS to offer customers specific designs with optimal features. With the addition of a suitable waveguide load and a dummy load on the appropriate port, a -port differential phase shift circulator may be operated as a high-power isolator. The reflected power which will be absorbed in the dummy load, or the output mismatch - (V.S.W.R.) - should be specified when ordering. Options such as direction of circulation, mechanical output ports E-bend or H-bend are available upon request. -

2 Electrical characteristics Notes Type Frequency range (GHz) Bandwidth (MHz) Avg. power max. W Peak power max. kw Specifications at 5 C Isolation. min. db Inse. loss max. db VSWR max. Spec. in temperature range Isolation. Inse. loss VSWR min. db max. db max. Temperature range C Flange Length mm approx. Weight kg. approx. WR975 waveguide (R9) -5 FC K ± UDR WR650 waveguide (R) - FD FULL 6 K 6500 O O to +50 CPR FD FULL 00 K 000 O 0..5 O to +0 CPR WR0 waveguide (R6) FE ± 5 50 K O +0 to +0 UG 55A/U 5 WR8 waveguide (R) - FE FULL K to +65 SPECIAL FE FULL 0 K to +50 SPECIAL FE FULL 6 K 6000 O to +50 CPR 8F FE FULL 7 K to +0 SPECIAL WR87 waveguide (R8) FG0.-5 FULL K to +0 UER WR7 waveguide (R70) FH FULL.5 K to +65 CPR FH FULL K O to +65 CPR WR waveguide (R8) FI FULL.8 K to +70 UG 8/U.6 - Fl FULL to +60 UG 8/U.6 - Fl FULL to +60 UG 8/U WR90 waveguide (R00) - FI FULL to +70 UG 5/U FI FULL to +70 UG 5/U FJ FULL to +70 UG 5/U FJ FULL to +60 UG 5/U 07 FJ FULL.5 K to +60 UG 9/U 6. WR75 waveguide (R0) FJ FULL K to +60 UBR WR6 waveguide (R0) FJ FULL.5 K to +55 UG 9/U. FJ FULL to +70 UG 9/U Notes: Water cooled 5 Can operate with permanent short circuit Air cooled 6 Pressurized SF 6 (5 PSIG) Air cooled pressurized 0 PSIG ( kg) 7 Pressurized SF 6 (5 PSIG) Pressurized 5 PSIG (. kg) -

3 Outline drawings R WR650 waveguide R6 WR0 waveguide FD600 - FD /6 FE600 5 load inlet outlet R WR8 waveguide FE FE Load Receiver Antenna Transmitter FE FE max OUTPUT max OUTLET 7 INLET -

4 R8 WR87 waveguide 0 max. FG0 9 max. 5 max max max. R70 WR7 waveguide FH600 8 FH R8 WR waveguide FI600 5 FI FI6007 -

5 R00 WR90 waveguide FJ6008 FI input 66. (input) output 5.8 R00 WR90 waveguide FI600 FJ load 5-5

6 R0 WR75 waveguide FJ load R0 WR6 waveguide FJ600 FJ