Presentation or Presentation of the range The RXM miniature relay range comprises: A relays with C/O contacts, 0 A relays with C/O contacts, A relays with C/O contacts and A low level relays with C/O contacts. All these relays have the same dimensions. Sockets with mixed or separate contact terminals. Protection modules (diode, RC circuit or varistor). All these modules are common to all sockets. A metal maintaining clamp for all sockets. A plastic maintaining clamp for all sockets. A -pole bus jumper that can be used on sockets with separate contact terminals in order to simplify cabling when creating an equipotential link between the coil terminals. Clip-in legends for all the sockets except RXZ EM. 0 00 0 0 0 Relay description Spring return pushbutton for testing the contacts (green: c, red: a). Mechanical relay status indicator. Removable lock-down door enabling forced maintaining of the contacts for test sequences or maintenance purposes. During operation, this lock-down door must always be in the closed position. LED (depending on version) indicating the relay status. Removable legend for relay identifi cation. Four notches for rail mounting adapter or panel mounting adapter with fi xing lugs. Eight, eleven or fourteen Faston type pins. Area by which the product can be easily gripped. Mounting adapter enabling direct mounting of the relay on a panel. 0 Mounting adapter enabling direct mounting of the relay on a rail. 00 Outputs Socket description Sockets with mixed contact terminals () Connection by screw clamp terminals or connector. Fourteen female contacts for the relay pins. Location for protection modules. Locking components for plastic and metal maintaining clamps. Locating slot for mounting on rail with fi xing clip. Two or four fi xing holes for panel mounting. 0 00 Inputs Relay supply Inputs Outputs Sockets with separate contact terminals () Connection by connector. Eight, eleven or fourteen female contacts for the relay pins. Location for protection modules. Locking components for plastic and metal maintaining clamps Locating slot for mounting on rail with fi xing clip. Two fi xing holes for panel mounting. Location for bus jumpers (see mounting on sockets on page 0/). () The inputs are mixed with the relay's supply, with the outputs being located on the other side of the socket. () The inputs and outputs are separated from the relay supply. Relay supply pages 0/ and 0/ pages 0/ and 0/ pages 0/ and 0/ page 0/ version:.0 0-EN.indd
Characteristics General characteristics Conforming to standards IEC/EN 0- (iss. ), UL 0, CSA C- n Product certifications UL, CSA Ambient air temperature around the device Storage C - 0 + Operation C - 0 + Vibration resistance In operation gn (0..0. Hz) conforming to IEC/EN 00-- Not operating gn (0... Hz) Degree of protection Conforming to IEC/EN 0 IP 0 Shock resistance Opening 0 gn conforming to IEC/EN 00-- Closing gn Protection category RT I Mounting position Any Insulation characteristics Rated insulation voltage (Ui) V 0 (IEC), 00 (UL, CSA) Rated impulse withstand voltage (Uimp) kv. (./0 μs) Dielectric strength (rms voltage) Between coil and contact a V 00 Between poles a V 00 Between contacts a V 00 Contact characteristics Relay type RXM ABppp RXM ABppp RXM ABppp RXM GBppp Number and type of contacts C/O C/O C/O C/O low level Contact materials AgNi AgAu - bifurcated Conventional thermal current (Ith) Rated operational current in utilisation category AC- For ambient temperature y C A 0 Conforming to IEC "C" 0 O Conforming to UL 0 Switching current Minimum ma 0 Switching voltage Maximum V a/c 0 (IEC) Minimum V Nominal load (resistive) A / 0 a V 0 / 0 a V / 0 a V / 0 a V A / c V 0 / c V / c V / c V Switching capacity Maximum a VA 000 00 00 0 c W 0 Minimum mw 0 Maximum operating rate In operating cycles No-load 000 Under load 00 Utilisation coefficient 0 % Mechanical durability In millions of operating cycles 0 Electrical durability In millions of operating cycles Electrical durability of contacts Resistive load a Durability (Number of operating cycles) 0 0 D A B 0 C 0 Switching capacity (kva) Resistive load 0. Inductive load See curves below Reduction coeffi cient for inductive load a (depending on power factor cos ϕ) Reduction coeffi cient (A) 0, 0, 0, 0, 0, 0, 0, 0, 0, cos ϕ Maximum switching capacity on resistive load c Current c 0 D C A 0, 0 0 00 0 B 00 0 Voltage c A RXM ABppp B RXM ABppp C RXM ABppp D RXM GBppp Durability (inductive load) = durability (resistive load) x reduction coeffi cient. 0 page 0/ pages 0/ and 0/ pages 0/ and 0/ page 0/ 0-EN.indd version:.0
Characteristics(continued) Coil characteristics Average consumption a VA. c W 0. Drop-out voltage threshold a u 0. Uc c u 0. Uc Operating time (response time) Between coil energisation and making of the On-delay contact Between coil de-energisation and making of the Off-delay contact a ms 0 c ms 0 a ms 0 c ms 0 Control circuit voltage Uc V 0 0 0 0 0 Relay control voltage codes JD BD ED FD GD MD d.c. supply Average resistance at 0 C ± 0% Ω 0 0 00 000 000 000 Operating voltage limits Min. V... 00 Max. V... Relay control voltage codes B E F P U a.c. supply Average resistance at 0 C ± % Ω 0 0 0 000 00 Operating voltage limits Min. V.. Max. V.. Socket characteristics Socket type RXZ ES0M RXZ ESM RXZ ESM RXZ EMM RXZ EM Relay types used RXM ppppp RXM ppppp RXM ppppp RXM ppppp() RXM ppppp Product certifications UL. CSA Conventional thermal current (Ith) A 0 Degree of protection Conforming to IEC/EN 0 IP 0 RXM ppppp() RXM ppppp Cabling Solid cable conductor mm 0.. 0.. without cable end AWG 0 0 Flexible cable with cable end conductors mm 0.. 0. 0. AWG 0 0 conductor mm 0.. 0. 0. AWG conductors mm 0. 0. 0. 0. AWG 0 Maximum tightening torque Nm 0. (M screw) Contact terminal arrangement Separate Mixed Bus jumper (Ith : A) Yes No () When mounting relay RXM ppppp on socket RXZ EMpppp, the thermal current must not exceed 0 A. 0 page 0/ pages 0/ and 0/ pages 0/ and 0/ page 0/ version:.0 0-EN.indd
References 0 0 0 0 RXM pabf RXM pabf RXM GBF RXM GBF Miniature relays without LED (sold in lots of 0) Control Number and type of contacts - Thermal current (Ith) circuit voltage C/O - A C/O - 0 A C/O - A V c RXM ABJD 0.0 RXM ABJD 0.0 RXM ABJD 0.0 c RXM ABBD 0.0 RXM ABBD 0.0 RXM ABBD 0.0 c RXM ABED 0.0 RXM ABED 0.0 RXM ABED 0.0 c 0 RXM ABFD 0.0 RXM ABFD 0.0 RXM ABFD 0.0 c 0 RXM ABMD 0.0 a RXM ABB 0.0 RXM ABB 0.0 RXM ABB 0.0 a RXM ABE 0.0 RXM ABE 0.0 RXM ABE 0.0 a 0 RXM ABF 0.0 RXM ABF 0.0 RXM ABF 0.0 a 0 RXM ABP 0.0 RXM ABP 0.0 RXM ABP 0.0 a 0 RXM ABU 0.0 Miniature relays with LED (sold in lots of 0) c RXM ABJD 0.0 RXM ABJD 0.0 RXM ABJD 0.0 c RXM ABBD 0.0 RXM ABBD 0.0 RXM ABBD 0.0 c RXM ABED 0.0 RXM ABED 0.0 RXM ABED 0.0 c 0 RXM ABFD 0.0 RXM ABFD 0.0 RXM ABFD 0.0 c RXM ABGD 0.0 a RXM ABB 0.0 RXM ABB 0.0 RXM ABB 0.0 a RXM ABE 0.0 RXM ABE 0.0 RXM ABE 0.0 a 0 RXM ABF 0.0 RXM ABF 0.0 RXM ABF 0.0 a 0 RXM ABP 0.0 RXM ABP 0.0 RXM ABP 0.0 Miniature relays with low level contacts, without LED (sold in lots of 0) Control circuit voltage V Number and type of contacts Thermal current (Ith) C/O - A c RXM GBJD 0.0 c RXM GBBD 0.0 c RXM GBED 0.0 c 0 RXM GBFD 0.0 a RXM GBB 0.0 a RXM GBE 0.0 a 0 RXM GBF 0.0 a 0 RXM GBP 0.0 Miniature relays with low level contacts, with LED (sold in lots of 0) c RXM GBJD 0.0 c RXM GBBD 0.0 c RXM GBED 0.0 c 0 RXM GBFD 0.0 a RXM GBB 0.0 a RXM GBE 0.0 a 0 RXM GBF 0.0 a 0 RXM GBP 0.0 a 0 RXM GBU 0.0 0 page 0/ pages 0/ and 0/ pages 0/ and 0/ page 0/ 0-EN.indd version:.0
References (continued) 0 00 00 00 RXZ EMM + Relay RXM ABF RXZ ESM + Relay RXM ABF RXM 0pp RE XLpp RXZ 00 Miniature relays without LED (sold in lots of 00) Control circuit voltage Number and type of contacts - Thermal current (Ith) C/O - A C/O - A V c RXM ABJDTQ 0.0 c RXM ABBDTQ 0.0 RXM ABBDTQ 0.0 c RXM ABEDTQ 0.0 c 0 RXM ABFDTQ 0.0 c 0 RXM ABMDTQ 0.0 a RXM ABBTQ 0.0 RXM ABBTQ 0.0 a RXM ABETQ 0.0 a 0 RXM ABFTQ 0.0 RXM ABFTQ 0.0 a 0 RXM ABPTQ 0.0 RXM ABPTQ 0.0 Miniature relays with LED (sold in lots of 00) c RXM ABBDTQ 0.0 a RXM ABBTQ 0.0 RXM ABBTQ 0.0 a 0 RXM ABPTQ 0.0 RXM ABPTQ 0.0 Sockets Contact terminal arrangement Connection Relay type Sold in lots of Mixed Screw clamp terminals RXM pppp() 0 RXZ EM () 0.0 RXM pppp Connector RXM pppp() 0 RXZ EMM () 0.0 RXM pppp Separate Connector RXM pppp 0 RXZ ES0M () 0.0 RXM pppp 0 RXZ ESM () 0.0 RXM pppp 0 RXZ ESM () 0.00 Protection modules Description Voltage For use with V Sold in lots of Diode c...0 All sockets 0 RXM 00W 0.00 RC circuit a...0 All sockets 0 RXM 0BN 0.00 a 0...0 All sockets 0 RXM 0FU 0.00 Varistor a/c... All sockets 0 RXM 0RB 0.00 a/c...0 All sockets 0 RXM 0BN 0.00 a/c 0...0 All sockets 0 RXM 0FP 0.00 Timing relays Description or timed C/O contacts (function A) Accessories Description For use with Sockets RXZ Eppppp RE XLpp () RE XLpp () For use with Sold in lots of Metal maintaining clamp All sockets 0 RXZ 00 0.00 Plastic maintaining clamp All sockets 0 RXZ R 0.00 Bus jumper, -pole (Ith : A) All sockets with separate contacts 0 RXZ S 0.00 Mounting adapter for rails () All relays 0 RXZ EDA 0.00 Mounting adapter All relays 0 RXZ EFA 0.00 with fixing lugs for panel Clip-in legends All relays (sheet of 0 legends) 0 RXZ L0 0.00 All sockets except RXZ EM 0 RXZ L0 0.00 () Thermal current Ith: 0 A () Thermal current Ith: A () When mounting relay RXM ppppp on socket RXZ EMpppp, the thermal current must not exceed 0 A. () Please consult the "Zelio Time timing relays" catalogue. () Test button becomes inaccessible page 0/ pages 0/ and 0/ pages 0/ and 0/ page 0/ version:.0 0-EN.indd
Dimensions Dimensions Miniature relays RXM pppppp RXM RXM RXM Common view Pin side view = = = = = 0,,, Sockets RXZ EM,,,,,,,, RXZ EMM 0 (), () () () 0, A A 0 0, () () () 0 0 A 0, A 0 Common side view RXZ ES0M RXZ ESM RXZ ESM () () () 0 (), A A, A A, 0 A A, () Relays. () Add-on protection module. () Maintaining clamp. () elongated holes Ø. x.. () bus jumpers. 0 page 0/ pages 0/ and 0/ pages 0/ and 0/ page 0/ 0-EN.indd version:.0
Dimensions (continued) Dimensions (continued) Plastic clamp and clip-in legends RXZ R RXZ L0 Mounting on all sockets (),, (), Bus jumper RXZ S Mounting on sockets with separate contacts (view from below) Example of bus jumper mounting on sockets () Clip-in legends for all sockets except RXZ EM. Metal clamp RXZ 00,,, () () () () 0, () bus jumpers (polarity A) () bus jumpers (polarity A) Mounting adapter for rail () RXZ EDA Mounting adapter for panel RXZ EFA () Test button becomes inaccessible,, 0 page 0/ pages 0/ and 0/ pages 0/ and 0/ page 0/ version:.0 0-EN.indd
Schemes Schemes Miniature relays RXM ppppp RXM ppppp RXM ppppp A A A A A A A A A A A 0 A Symbols shown in blue correspond to Nema marking. 0 page 0/ pages 0/ and 0/ pages 0/ and 0/ pages 0/ and 0/ 0-EN.indd version:.0