SELF PRIMING PUMPS in cast iron

AGE-AGF SELF PRIMING PUMPS in cast iron Self-priming jet pumps produced in cast iron, suitable for water supply, domestic pressure and small irrigation systems, pool and tank emptying and general clean water pumping. SPECIFICATIONS Maximum working pressure Maximum liquid temperature Maximum suction depth : 6 bar : 45 C : 8 m MATERIALS Pump body in cast iron Casing cover in AISI 304 Shaft in AISI 416 Impeller, nozzle and diffuser in technopolymer Mechanical seal in carbon/ceramic/nbr TECHNICAL DATA Asynchronous 2 pole motor Insulation : Class F Protection degree: IP44 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz Permanent split capacitor and automatic thermal overload protection for single-phase version Thermal protection to be provided by the user DNA- DNM 1 DIMENSION TABLE 246

AGE-AGF PERFORMANCE CURVE PERFORMANCE TABLE 247

AGA-AGC SELF PRIMING PUMPS in cast iron Self-priming electropump made in cast iron, suitable for domestic pressure boosting, small irrigation, gardening, car wash, emptying tank and pools and pumping clear water in general. SPECIFICATIONS Maximum working pressure : 6 bar for AGA 0.60-0.75-1.00 10 bar for other models Maximum liquid temperature : 35 C according EN 60335-2-41 for domestic uses 45 C for other uses Maximum suction : 8 mts MATERIALS Pump body in cast iron Casing cover in AISI 304 for AGA 0.60-0.75-1.00 Shaft in AISI 416 for AGA 0.60-0.75-1.00, in AISI 303 for the other models Impeller in technopolymer for AGA 0.60-0.75-1.00, in brass for the other models Mechanical seal in carbon/ceramic/nbr TECHNICAL DATA Asynchronous 2 pole motor Insulation : Class F Protection degree : IP44 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz Permanent split capacitor and automatic thermal overload protection for single-phase version Thermal protection to be provided by the user DNM 1 DIMENSION TABLE 248

AGA-AGC PERFORMANCE CURVE PERFORMANCE TABLE 249

SWA SELF PRIMING CENTRIFUGAL PUMPS - for swimming pool SWA is a horizontal centrifugal, self priming pump particularly suitable for water circulation in swimming-pool systems. APPLICATIONS For water circulation in swimming pool filtration system MATERIALS Pump casing, impeller, diffuser : thermoplastic glass reinforced Strainer basket : thermoplastic Shaft : stainless steel in AISI 316 Mechanical seal : ceramic/carbon/ NBR TECHNICAL DATA Capacity up to 32 m 3 /h Total head up to 19m Power up to 1.5kW Maximum working pressure : 3 bar Maximum water pressure : 40 C Motor : 2 pole, Class F insulation, IP55 protection, continuously rated Single phase version : from 0.5 up to 2HP : 230V-50Hz permanent split capacitor built in overload motor protection with automatic reset Three phase version : from 0.6 up to 2HP : 400V overload protection must be provided by the user DIMENSIONAL TABLE 250

SWA PERFORMANCE CURVE 2 Pole 20 18 16 14 12 10 8 6 4 2 Hm 9 12 14 19 24 28 0 6 10 14 18 22 26 30 34 Qm 3 /h PERFORMANCE TABLE 251

FQ & FQD SELF PRIMING PUMPS FQ FQD APPLICATIONS Water supply Agriculture Sprinkling Drainage FEATURES Self priming pump; Priming required for initial use only Enclosed impeller ensures high efficiency Fast pumping action; Special design casing provides very fast action BPO (back pull out) system; Over haul without suction/discharge pipe removal Non-overload design; Ensures stable performance for all applications Sealed ball bearing; Eliminates need of lubrication Compact construction; The two-pole high speed motor provides a compact unit and minimizes installation area 403 stainless steel shaft; Portion of shaft contacting liquid is made of 403 stainless and is highly resistant to wear SPECIFICATION & ACCESSORIES Model FQ Model FQD Standard Optional Standard Optional Liquid Fresh water Fresh water Temperatures 0~40 C (32~104 F) 0~40 C (32~104 F) Re. NPSH 4m (13 feet) 4m (13 feet) Speeds 3000min -1-50Hz 3000min -1-50Hz Installations Indoors Indoors Materials Casing Cast iron Cast iron Impeller Bronze Bronze Shaft 403 stainless steel 304 stainless steel 403 stainless steel 420J stainless steel Flange JIS 10kgf/cm 2 GR.F. JIS 10kgf/cm 2 GR.F. thin type thin type Construction Direct coupled type Close coupled type Nozzle position End suction-top discharge End suction-top discharge Impeller type Enclosed Enclosed Stuffing box Packing Mechanical seal Bearing Sealed ball Sealed ball Accessories [Bare shaft pump] Strainer Base... 1 Strainer Priming plug Companion flanges Priming plug... 1 Companion flanges Air vent valve (with bolts) Air vent valve... 1 (with bolts) Anchor bolts Anchor bolts [With motor] Pressure gauge Pressure gauge Common base...1 Compound gauge Compound gauge Coupling... 1 set Vacuum gauge Vacuum gauge Coupling guard... 1 Gate valve Gate valve Check valve Check valve 252

FQ & FQD SELECTION CHART MODEL FQ & FQD Model FMQ range SYMBOLS 40 FQ 5. 75 Model FQ or FQD Size : mm Motor output : kw Frequency 50Hz : 5 253

FQ & FQD DIMENSION MODEL FQD Flange Size ø g e f t n h 32 80 100 135 18 4 15 40 85 105 140 18 4 15 50 100 120 155 18 4 15 65 120 140 175 18 4 15 50 Hz Size Output Pump & Motor Weight Model {Mass} Ø kw A B C H P G BN1 BM BN2 BY BZ Z Fd FI Fa Fb kg 32 32FQD5.4 0.4 110 273 125 220 142 12 60 130 60 230 250 12 M10 125 25 40 27 32FQD5.75 0.75 110 287 125 220 150 12 60 130 60 230 250 12 M10 125 25 40 30 40FQD5.75 0.75 150 300 125 225 150 5 65 270 45 290 322 12 M10 125 25 40 36 40 40FQD51.5 1.5 150 353 125 265 157 5 65 270 45 290 322 12 M10 125 25 40 45 40FQD52.2 2.2 150 367 125 265 157 5 65 270 45 290 322 12 M10 125 25 40 49 50 50FQD51.5 1.5 160 353 125 225 157 5 65 270 45 290 322 12 M10 125 25 40 44 50FQD52.2 2.2 160 367 125 265 157 5 65 270 45 290 322 12 M10 125 25 40 50 65 65FQD52.2 2.2 170 367 125 225 157 5 65 270 45 290 322 12 M10 125 25 40 49 65FQD53.7 3.7 170 421 125 265 187 5 65 270 45 290 322 12 M10 125 25 40 69 Note : Open drip-proof type motor is indicated. MODEL FQ 50 Hz Size Output Pump Motor Common base Anchor bolt Weight Model Ø kw A B C H F L Frame {Mass} MA MR BM BN1 BN2 BY1 BY2 No. Fd FI Fa Fb kg 40FQ5.75 0.75 150 200 125 250 25 618 80 125 140 330 85 70 290 230 M10 125 40 40 45 40 40FQ51.5 1.5 150 280 125 290 45 751.5 90L 150 168.5 420 105 80 290 230 M10 125 40 40 64 40FQ52.2 2.2 150 280 125 290 45 781 100L 165 183 420 105 105 290 290 M10 125 40 40 68 50 50FQ51.5 1.5 160 280 125 250 45 761.5 90L 150 168.5 420 105 80 290 230 M10 125 40 40 61 50FQ52.2 2.2 160 280 125 290 45 791 100L 165 183 420 105 105 290 290 M10 125 40 40 71 65 65FQ52.5 2.2 170 280 125 250 45 801 100L 165 183 420 105 105 290 290 M10 125 40 40 67 65FQ53.7 3.7 170 280 125 290 45 828 112M 175 200 420 105 105 290 290 M10 125 40 40 93 80 80FQ53.7 3.7 190 360 125 335 55 928 112M 175 200 540 130 70 350 290 M12 160 50 50 106 80FQ55.5 5.5 190 360 125 335 55 997 132S 205 239 540 130 150 350 350 M12 160 50 50 136 254 Size ø g e f t n h 40 85 105 140 18 4 15 50 100 120 155 18 4 15 65 120 140 175 18 4 15 80 130 150 185 18 8 15

SQ SELF PRIMING VOLUTE PUMPS Semi-open impeller type Enclosed impeller type APPLICATIONS Building drainage Agriculture water supply Miscellaneous water supply and drainage FEATURES No priming is required except for initial use Special design of casing provides very quick priming Water mixed with a little sand or mud can be pumped up due to semi-open impeller design Grease lubrication ensures long life of mechanical seal APPLICATIONS Water supply Agriculture Sprinkling FEATURES No priming is required except for initial use Special design of casing provides very quick priming High efficiency is achieved due to enclosed impeller No need of lubrication due to sealed ball bearing SPECIFICATIONS Semi-open impeller type Enclosed impeller type Standard Optional Standard Optional Liquid Turbid water, Muddy or Fresh water or equivalent Sandy water, fresh water Temperature 0 ~ 40 C (32 ~ 104 F) 0 ~ 40 C (32 ~ 104 F) Re. NPSH Below 5m (at 20 C) Below 5m (at 20 C) Synchronous speed 1500 min -1 / 50Hz 1500 min -1 / 50Hz Installation Indoors Indoors Material Casing Cast iron Cast iron Impeller Cast iron Bronze Cast iron Bronze Shaft Carbon steel 403 stainless steel 403 stainless steel Flange Standard for model SQ JIS 10kgf/cm 2 GR.F. Construction Nozzle position End suction, top discharge End suction, top discharge Impeller type Semi-open Enclosed Stuffing box Mechanical seal Mechanical seal Bearing Sealed ball bearing Sealed ball bearing Accessories [Bare shaft pump] Strainer [Bare shaft pump] Strainer Priming funnel...1 Anchor bolts Priming funnel...1 Companion flange Automatic air vent valve (with bolts) Companion flanges Pressure gauge Anchor bolts (with bolts)... 2 set Compound gauge Automatic air vent valve [With motor] Vacuum gauge [With motor] Pressure gauge Common base... 1 Check valve Common base... 1 Compound gauge Coupling... 1 set Check valve Coupling... 1 set Vacuum valve Coupling guard... 1 Coupling guard... 1 Gate valve Check valve 255

SQ SELECTION CHART : Closed impeller type SYMBOL 32 SQE 5.2 S Phases S = single phase No indication = 3 phase Motor output (kw) Frequency (5=50 Hz) Model Size (mm) PERFORMANCE TABLE 1. SINGLE PHASE Size Model Output Capacity Total head Capacity Total head mm kw m 3 /min m m 3 /min m 25 25SQF5.2S 0.2 0.040 5.4 0.080 4.0 32 32SQE5.2S 0.2 0.050 4.0 0.095 1.9 32SQF5.2S 0.2 0.060 5.2 0.120 3.7 40 40SQE5.2S 0.2 0.075 4.6 0.150 2.5 40SQE5.4S 0.4 0.080 7.5 0.150 6.0 50 50SQE5.4S 0.4 0.110 7.2 0.210 3.6 2. 3 PHASE Size Model Output Capacity Total head Capacity Total head mm kw m 3 /min m m 3 /min m 25 25SQF5.2S 0.2 0.040 5.4 0.080 4.0 32 32SQE5.2S 0.2 0.050 4.0 0.095 1.9 32SQF5.2S 0.2 0.060 5.2 0.120 3.7 40 40SQE5.2S 0.2 0.075 4.6 0.150 2.5 40SQE5.4S 0.4 0.080 7.5 0.150 6.0 40SQG5.75 0.75 0.080 12.8 0.200 9.0 50SQE5.4 0.4 0.110 7.2 0.210 3.6 50 50SQE5.75 0.75 0.150 8.3 0.320 6.8 50SQG51.5 1.5 0.140 14.7 0.320 12.0 65SQF5.75 0.75 0.220 7.3 0.380 4.0 65 65SQF51.5 1.5 0.240 9.1 0.500 7.8 65SQG52.2 2.2 0.200 20.3 0.500 13.5 80SQE51.5 1.5 0.400 8.6 0.700 5.6 80 80SQF52.2 2.2 0.320 13.3 0.800 9.0 80SQG53.7 3.7 0.350 21.4 0.800 14.5 100 100SQF53.7 3.7 0.630 14.5 1.250 10.5 100SQG57.5 7.5 0.550 24.4 1.250 18.5 Vib. isolating frame Type DAS Type DB Vib. isolating frame Type DAS Type DB DAS-2 DB-3 DAS-2 DB-3 DAS-2 DB-3 DAS-2 DB-3 DAS-3 DB-4 256

SQ DIMENSION SEMI-OPEN IMPELLER TYPE, BARE SHAFT PUMP Shaft Strainer Size Sø Sp Sq 25 PT-1 44 75 32 PT-1-1/4 54 80 40 PT-1-1/2 63 105 50 PT-2 75 110 65-102 190 80-122 195 Pump Companion Shaft Ball Mechanical Weight Size Model flange bearing seal {Mass} A B C G E H J K M N O P R T Z Ø t Q S U V W l kg 25 25SQF 60 215 60 175 25 90 40 10 60 160 90 180 205 12 10 PT-1 15 38 18 3 5 5 28 6304ZZ EH-140-20 16 32 32SQE 60 215 60 175 25 90 40 10 60 160 90 180 205 12 10 PT-1-1/4 15 38 18 3 5 5 28 6304ZZ EH-140-20 16 32SQF 60 220 60 200 35 115 40 10 60 150 90 180 210 15 12 PT-1-1/4 18 38 18 3 5 5 28 6304ZZ EH-140-20 18 40SQE 60 220 60 200 35 115 40 10 60 150 90 180 210 15 12 PT-1-1/2 18 38 18 3 5 5 28 6304ZZ EH-140-20 18 40 40SQF 70 225 55 235 45 135 40-10 90 200 120 230 235 15 12 PT-1-1/2 18 38 18 3 5 5 28 6304ZZ EH-140-20 24 40SQG 70 243 65 285 60 160 50 17 100 240 130 270 226 15 12 PT-1-1/2 18 38 24 4 7 7 36 6305ZZ EH-140-25 35 50SQE 70 225 55 235 45 135 40-10 90 200 120 230 235 15 12 PT-2 18 38 18 3 5 5 28 6304ZZ EH-140-20 24 50 50SQF 70 250 70 235 50 135 40 15 90 200 120 230 235 15 12 PT-2 18 38 24 4 7 7 36 6305ZZ EH-140-25 30 50SQG 70 253 75 285 50 160 50 27 100 240 130 270 226 15 12 PT-2 18 38 24 4 7 7 36 6305ZZ EH-140-25 37 65 65SQE 70 250 70 235 50 135 40 15 90 200 120 230 235 15 12 PT-2-1/2 18 38 24 4 7 7 36 6305ZZ EH-140-25 30 65SQF 90 255 85 245 60 135 40 20 90 200 120 230 235 15 12 PT-2-1/2 24 38 24 4 7 7 36 6305ZZ EH-140-25 37 80 80SQE 90 255 85 245 60 135 40 20 90 200 120 230 235 15 12 PT-3 24 38 24 4 7 7 36 6305ZZ EH-140-25 37 257

SQ DIMENSION ENCLOSED IMPELLER TYPE, BARE SHAFT PUMP Shaft Flange Strainer Size Sp Sq 65 102 190 80 122 195 100 182 195 Size ø1 ø2 g e f t t1 n h 65SQG 65 80 120 140 175 18 2 4 15 80SQF 80 100 130 150 185 18 2 8 15 80SQG 80 80 130 150 185 18 2 8 15 100SQF 100 100 150 175 210 20 2 8 15 100SQG 100 125 150 175 210 20 2 8 15 Size Model Pump Shaft Ball Mechanical Weight ø bearing seal {Mass} kg A B C G H J K M N O P R T Z Q S U V W l 65 65SQG 135 290 115 305 170 60 10 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 53 80 80SQF 160 300 135 325 170 50 0 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 58.5 80SQG 145 290 120 300 170 60 10 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 53 100 100SQF 160 300 145 315 170 50 0 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 60 100SQG 175 342 155 425 220 70 15 160 300 200 340 357 18 15 76 32 4.5 8 10 64 6307ZZ EA-104-30 91 258

FSQ SELF PRIMING PUMPS APPLICATIONS Water supply Agriculture Sprinkling Drainage Irrigation FEATURES Self priming pump Priming required for initial use only Fast pumping action Special design casing provides very fast action BPO (back pull out) system Over haul without suction/discharge pipe removal Non-overload design Ensures stable performance for all range Sealed ball bearing Eliminates need of lubrication Semi open impeller Water mixed with a little sand or mud can be pumped up due to semi-open impeller design SPECIFICATIONS & ACCESSORIES Standard Optional Liquid Fresh water Temperatures 0~40 C (32~104 F) Re. NPSH 50Hz...below 5.5m Synchronous Speeds 1500 min -1 /50Hz Installations Indoors Outdoors Materials Casing Cast iron Impeller Cast iron Bronze Shaft Carbon steel 420 stainless steel 304 stainless steel Others All iron Flange JIS 10kg/cm 2 GR.F. thin type Construction Nozzle position End suction, top discharge Impeller type Semi-open Stuffing box Packing Bearing Sealed ball Accessories [Bare shaft pump] Strainer Air vent valve Companion flanges (with bolts) Anchor bolts [With motor] Common base...1 Pressure gauge Coupling... 1 set Compound gauge Coupling guard... 1 Vacuum gauge Gate valve Check valve 259

FSQ SELECTION CHART 1500 min -1 SYMBOLS 125 FSQH 5 5.5 Motor output kw Frequency 50Hz : 5 Model Size (mm) 260

FSQ DIMENSION BARE SHAFT PUMP Size Sø Sp Sq R Total passage area mm 2 125 PT-5 215 330 9 730 150 PT-6 215 330 9 730 Size g e f t t1 n h 125 185 210 250 22 2 8 19 150 215 240 280 22 2 8 19 Size Model Pump Shaft Ball Mechanical Weight ø bearing seal {Mass} A B C D E F G H J M N O P R X Z S Q L U V W #1134 kg 125 125FSQH 250 470 360 195 280 120 14 200 80 360 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 100 125FSQJ 250 470 385 215 315 120 16 225 80 400 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 110 150 150FSQH 280 470 405 220 315 120 16 225 80 400 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 120 150FSQJ 280 470 430 245 315 120 16 250 80 400 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 130 PUMP WITH BASE AND MOTOR Size Sø Sp Sq R Total passage area mm 2 125 PS-5 215 330 9 730 150 PS-6 215 330 9 730 50Hz Size g e f t t1 n h 125 185 210 250 22 2 8 19 150 215 240 280 22 2 8 19 Size Model Output Pump Motor Common Base Anchor bolt Weight Ø kw A B C D H L P Frame No. MA MR BN1 BN2 BM BY1 BY2 Fd FI Fa Fb {Mass} 125 125FSQH55.5 5.5 250 470 450 195 290 1167 80 132S 205 239 170 120 660 440 350 M16 315 65 63 196 125FSQJ57.5 7.5 250 470 475 215 315 1206 80 132M 225 258 170 120 660 490 400 M16 315 65 63 229 150 150FSQH55.5 5.5 280 470 495 220 315 1197 80 132S 205 239 170 120 660 490 400 M16 315 65 63 227 150FSQJ511 11 280 470 520 245 340 1331 100 160M 255 323 190 150 740 490 400 M16 315 65 63 282 * All specifications subject to change without notice Note : Motor specifications: Three phase induction motor, totally enclosed fan cooled. 261

SQPB SELF PRIMING PUMPS APPLICATIONS Irrigation Drainage General purpose FEATURES No priming is required except for initial use Special design of casing provides very rapid priming for extended piping Maintenance is facilitated due to packing type Water mixed with a little sand or mud can be pumped up due to semi-open impeller design Easy installation with engine for belt driven due to c.c.w rotation SPECIFICATIONS Description Standard Optional Liquid Fresh water, river water, rain water Sea water Temperatures 0~40 C Reg. NPSH 4m Rotation Counter clockwise when viewed from drive end Installations Outdoors Materials Casing Cast iron Bronze Impeller Cast iron Bronze Shaft Carbon steel Stainless steel Construction Impeller Semi-open Stuffing box Packing Bearing Sealed ball bearing 262

SQPB SECTION VIEW SEMI OPEN IMPELLER OTHERS PUMP COUPLED WITH ENGINE *This picture do not show belt cover. (for safety purpose belt cover should be installed). CUT MODEL OF PUMP 263

SQPB PERFORMANCE CURVE 264

SQPB DIMENSION 50 SQPB 80 SQPB 100 SQPB 150 SQPB Model ø2 g e f t n h 50 SQPB PS-2 80 SQPB PS-3 130 150 185 18 4 15 100 SQPB PS-4 155 175 210 20 4 15 150 SQPB 150 215 240 280 22 8 19 Model Pump Shaft End Weight {Mass} ø1 A B C E G H J T M N O P X Z S Q I V W kg 50 SQPB PS-2 100 240 100 40 165 112 35 10 50 150 80 180 0 12 19 34 27 6 6 17 80SQPB PS-3 120 275 120 25 225 132 40 12 70 190 100 230 10 12 24 50 40 8 7 27 100 SQPB PS-4 130 330 155 25 275 160 50 12 100 230 140 280 20 15 28 55 50 8 7 42 150 SQPB 150 280 470 180-400 225 80 16 120 315 160 400-19 32 80 68 8 10 130 * All specifications subject to change without notice Note : Motor specifications: Three phase induction motor, totally enclosed fan cooled. 265

FMQ SELF PRIMING MULTISTAGE PUMPS APPLICATIONS Water supply Agriculture Sprinkling Drainage ADVANTAGES Energy saving due to high efficiency Compact size Easy maintenance Robust self-priming design STANDARD SPECIFICATIONS PERFORMANCE TABLE Dimension Pump type Fig. Motor Capacity Total head Capacity Total head mm kw (L/min) m (L/min) m 40 40FMQ252.2 2 2.2 80 46.5 200 35.0 40FMQ353.7 3 3.7 80 73.0 200 59.0 50 50FMQ253.7 2 3.7 140 51.0 320 40.0 50FMQ355.5 3 5.5 140 76.5 320 61.0 65 65FMQ55.5 2 5.5 250 47.5 600 32.5 65FMQ357.5 3 7.5 250 67.0 600 44.0 266

FMQ SECTION VIEW PART NO. PART NAME 002 SUCTION CASING 003 DISCHARGE CASING 005 INTERSTAGE CASING 012 SUCTION FLANGE 021 IMPELLER 022 DEFUSER 031 SHAFT 039 KEY 048 IMPELLER NUT 051 BEARING HOUSING 053 BEARING COVER 056 BALL BEARING 085 LANTERN RING BUSHING 091 GLAND 093 DEFLECTOR 100-1 CHECK VALVE 100-2 CHECK VALVE SEAT 107 CASING RING 115 O RING 119 PACKING 124 GLAND BOLT 135 WASHER 211 AIR VENT VALVE 217 PLUG 267

FMQ SELECTION CHART 3000 min -1 Total Head (m) Capacity (L/min) 268

FMQ DIMENSION BARE SHAFT PUMPS Flange Shaft 40 50 65 Size ø g e f t n h Suction 85 105 140 18 4 15 Discharge 85 105 140 20 4 19 Suction 100 120 155 18 4 15 Discharge 100 120 155 20 4 19 Suction 120 140 175 18 4 15 Discharge 120 140 175 22 4 19 Size Model Stage Pump Shaft Ball bearing Weight ø Pump side Packing {Mass} A B C D E F G H J M N Z S Q l U V W Opposite side kg 40 40FMQ 2 185 360 177 212 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 41 40FMQ 3 230 360 177 212 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 50 50 50FMQ 2 195 360 185 225 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 45 50FMQ 3 240 360 185 225 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 55 65 65FMQ 2 215 360 205 250 212 70 15 160 50 265 100 15 32 60 50 5 8 10 6307ZZ 30x46x8-4 57 65FMQ 3 265 360 205 250 212 70 15 160 50 265 100 15 32 60 50 5 8 10 6307ZZ 30x46x8-4 68 *All specifications subject to change without notice In this catalogue, the particulars in { } are in accordance with the International System of Units (SI) and given for reference only. 269

MSQ MSQ SELF PRIMING MULTISTAGE PUMPS APPLICATIONS General water supply Irrigation ADVANTAGES High efficiency is maintained for a wide range due to double volute design Long life due to simple construction and quite operation STANDARD SPECIFICATIONS 270

MSQ SELECTION CHART 1500 min -1 Total Head (m) Capacity (L/min) This area should be recommended to selected FMQ Discharge flange & JIS10K normal 271

MSQ PERFORMANCE TABLE Dimension Pump type Fig. Motor Capacity Total head Capacity Total head mm kw (L/min) m (L/min) m 40MSQ251.5 2 1.5 90 19.0 180 11.0 40MSQ351.5 3 1.5 90 29.0 180 17.0 40MSQ452.2 4 2.2 90 39.0 180 24.0 40MSQ552.2 5 2.2 90 49.0 180 30.0 40 40MSQ653.7 6 3.7 90 59.0 180 37.0 40MSQ753.7 7 3.7 90 69.0 180 43.0 40MSQ853.7 8 3.7 90 79.0 180 51.0 40MSQ955.5 9 5.5 90 89.0 180 58.0 40MSQ1055.5 10 5.5 90 99.0 180 63.0 50MSQ251.5 2 1.5 140 21.2 280 14.0 50MSQ352.2 3 2.2 140 33.4 280 20.0 50MSQ453.7 4 3.7 140 43.9 280 27.0 50MSQ553.7 5 3.7 140 54.5 280 34.0 50 50MSQ655.5 6 5.5 140 68.4 280 40.0 50MSQ755.5 7 5.5 140 76.4 280 51.0 50MSQ855.5 8 5.5 140 88.0 225 75.0 50MSQ857.5 8 7.5 140 88.2 280 58.0 50MSQ957.5 9 7.5 140 99.0 280 66.0 50MSQ1057.5 10 7.5 140 110.0 280 77.0 65MSQ253.7 2 3.7 225 27.5 450 17.0 65MSQ353.7 3 3.7 225 37.0 450 24.0 65MSQ455.5 4 5.5 225 54.2 450 35.0 65MSQ557.5 5 7.5 225 69.0 450 47.0 65 65MSQ657.5 6 7.5 225 80.2 450 52.0 65MSQ7511 7 11 225 96.0 450 65.0 65MSQ8511 8 11 225 110.0 450 75.0 65MSQ9511 9 11 225 123.0 355 105.0 65MSQ9515 9 15 225 123.1 450 82.0 80MSQ255.5 2 5.5 355 31.0 710 21.0 80MSQ357.5 3 7.5 355 45.8 710 32.0 80MSQ4511 4 11 355 61.9 710 41.0 80 80MSQ5511 5 11 355 77.7 710 54.0 80MSQ6515 6 15 355 90.8 710 62.0 80MSQ7515 7 15 355 108.0 560 92.0 80MSQ7518 7 18.5 355 108.3 710 76.0 80MSQ8518 8 18.5 355 124.0 710 84.0 272