Laredo Decorative Wallpack Family NEW Selections Full Cutoff IDA Compliant
Laredo Application Guide Compact LCC 6-1ft mounting height The Laredo Family meets the Strictest Lighting Codes Full Cutoff IDA Compliant - Energy efficient All three size units feature flat glass lens with optics that produce no uplight, focusing the light where it is needed and reducing glare and sky glow, thus meeting the strictest light codes. The LCC and LMC series have new LED systems to cover mounting heights from 8-15 feet. Wide lateral spread with excellent uniformity provide excellent lighting with the benefits of long life and energy savings. The LMC and LLC pulse start units include an internal comfort shield to further reduce front arc tube visibility, increasing pedestrian comfort and lighting uniformity. The shield can be easily removed in the field for greater forward punch and lumen output. The vertical base up design on pulse start LMC/LLC units increases both life and lumen output versus typical horizontal lamp fixtures. The Laredo family offers the most energy efficient light sources available LED, electronic metal halide, pulse start metal halide, and CFL. Medium LMC Large LLC 10-15ft mounting height 15-5ft mounting height Egress Lighting Capability Battery Back-up LCC egress safety options: LCC egress mini-can socket that can handle up to 50w halogen and be tied back to a generator or other 10V back-up system Remote battery (by others) can be used with the electronic CFL units LMC egress options: New LED version has an optional battery back-up to power a reduced number of LEDs providing uniform illumination CFL versions feature either a -4 F (BBU) or 3 F (BOC) battery option to support one lamp EM is a double contact bayonet socket with quartz lamp that can be wired back to the building s generator at 10V EM1 is a two pin socket for MR16 lamps (by others) that can be wired to a remote battery within the building, such as a battery combo exit fixture LLC egress options: Two lamp integral fluorescent battery back up one unit with self contained redundant lamp and battery capability to meet strict safety codes EM option for 10V generator back up Decorative Styling with Peak Performance The Laredo styling is designed to blend with the building architecture using similar finish colors or accent the building with contrasting finish. The accent ribs and curves of the housing complement the other Southwest Series fixtures such as the Medallion and Cimarron full cutoff area lights and the Laramie decorative flood series. The front smooth curve complements the Cimarron providing architectural continuity from the parking lot to the building. The reflector systems all produce full cutoff, IDA compliant distributions with wide lateral throw and good forward punch. The compact units have horizontal lamps to minimize fixture size for lower mounting heights of 6-1 feet. Mid-size units feature vertical lamps for greater life and light output than comparable horizontal lamp luminaires. The large unit also has a vertical lamp in the pulse start and twin lamp CFL systems, while HPS units use horizontal lamps due to length. Touch Latch Optional stainless steel touch latch allows tool-free access to lamp, reflector and lens for ease of maintenance on LMC and LLC units. Not available on LMC-LED fixtures. Standard closure by two HubbellGard coated steel screws.
The Laredo family of fixtures are of the highest quality construction and are available with a variety of options including NEW LED (LMC and LCC) to maximize energysavings and application flexibility. (LMC18LU5K shown) Laredo Construction Option Details Photo Control Factory installed button photocontrols are available on select models for energy-savings. Quick Mounting LMC LED features a quick mount adapter easy mounting without opening fixture. Attach adapter plate to wall, connect wires, hang fixture and tighten set screws. Secure Mounting Foam gasket for secure sealing to smooth surfaces with key slot configuration (except LMC LED). Mounting template included. High Power LEDS Precision LED optics spread lumens uniformly. Single unit coverage is 45-50 laterally and 0-5 forward from 1-14ft mounting height. Surface Wiring Auxiliary Lamp Sockets Polycarbonate Shield Optics Laredo units have three 1/ tapped access hubs (top and both sides) for surface conduit wiring. LMC-LED units are for recessed box wiring only. Battery Test Switch External test switch provided on BBU/ BOC units allowing testing without opening fixture. EM Auxiliary socket for remote 10V power (by others) available on all units for egress. EM1 MR16 socket available on LMC series for remote 1 volt power (by others) for egress. 1/8 clear polycarbonate shield protects lens and lamp from rocks and debris. Field installation required. Available for all Laredo models. Multi-piece, segmented optics provide wide lateral spread and forward illumination. Comfort shield provided in LMC and LLC metal halide units to reduce brightness as you approach the luminaire and increase uniformity. Can be removed for increased forward throw. 3
Laredo LCC Series New The compact Laredo is designed for entrance and single story perimeter lighting, 6-1 foot applications. Systems include full cutoff energy-saving Pulse Start, CFL, and HPS. LED units are IDA compliant, neighbor friendly without light trespass and glare. APPLICATION IDA compliant entry or perimeter lighting LCC is listed to UL1598 for use in wet locations Ordering Information ORDERING EXAMPLE: LCC-70P8-1-LP Series LCC 70P8 1 LP Wattage/Source/Voltage Finish Options LCC Laredo Compact Cutoff LED* 1LU-5K 1w 10-77V ELECTRONIC FLUORESCENT 6 F 8 6w 10-77V 3 F 8 3w 10-77V 4 F 8 4w 10-77V PULSE START MH 50 P 9 50w 10/77V 70 P 8 70w 10-77V HPS 50 S 1 50w 10V NPF 70 S 1 70w 10V NPF 50 S 8 50w 10-77V 70 S 8 70w 10-77V 1 Dark Bronze Black 3 Gray 4 White 5 Platinum PHOTOCONTROL PC1 Button Photocontrol 10V PC Button Photocontrol 08V PC3 Button Photocontrol 40V PC4 Button Photocontrol 77V EGRESS LAMP SOCKET EM Mini can base socket only for remote power by others (Max 50w Halogen recommended) LAMP INCLUDED LP Lamp shipped in carton with fixture; standard on LED units. Fluorescent lamps are 3500K *LCC LED System: 800 lumens at 1.4w 5000K color temperature Driver is 10-77V for 50/60hz Five year limited warranty Typical spacing of three times mounting height IDA approved no uplight Accessories LCC-SPC Polycarbonate shield PBT-1 10V button PC PBT-34 08/40/77V button PTA-8 External 10-77V Photocontrol (use for 70w) For use on CFL and LED units only 347V is available in 50P, 70P and 70S. Example: Change 50P8 to 50P6. Dimensions A A B C 9.0 9.5 7. (9mm) (41mm) (183mm) B C 4
New LMC Series Laredo The mid-size Laredo is the most versatile in the series, covering perimeter mounting applications from 10-15 feet and is loaded with options and capabilities. The new 44w LED system provides excellent uniformity, producing a rectangular pattern of 000 lumens with 5000K CCT. The LED fixture has a special quick mount adapter allowing installation without ever opening the fixture (wires to recessed junction boxes only). HID fixtures mount lamp vertically in the segmented reflector system to provide wide spacings and controlled forward throw. Multiple egress lighting options include battery back up for fluorescent, EM socket for 10V generator systems and single or twin EM1 for 1V MR16 remote battery systems. APPLICATION IDA compliant perimeter lighting LMC is listed to UL1598 for use in wet locations Ordering Information ORDERING EXAMPLE: LMC-150P8-1-PC1-TL-LP LMC 150P8 1 PC1-TL-LP Series Wattage/Source/Voltage Finish Options LMC Laredo Medium Cutoff Dimensions LED*,7 18LU-5K 44.5w 10-77V PULSE START METAL HALIDE 50P9 50w 10/77V Dual Volt 70P8 70w 10-77V 70P6 70w Tri-Tap 10, 77, 347V 100P8 100w 10-77V 100P6 100wTri-Tap 10, 77, 347V 100P5 100w 480V 150P8 150w 10-77V 150P6 150w Tri-Tap 10, 77, 347V 150P5 150w 480V Note: 50hz available consult factory ELECTRONIC METAL HALIDE 70E8 5 70w 10-77V 100E8 5 100w 10-77V ELECTRONIC FLUORESCENT 4F8 5 4w 10-77V 84F8 4,5 84w 10-77V HIGH PRESSURE SODIUM 70S8 70w 10-77V 70S6 70w Tri-Tap 10, 77, 347V 70S5 70w 480V 150S8 70w 10-77V 150S6 150w Tri-Tap 10, 77, 347V 150S5 150w 480V *LMC LED System: 039 lumens at 44.5w 5000K color temperature Driver is 10-77V for 50/60hz Five year limited warranty Typical spacing is four times mounting height IDA approved no uplight 1 Dark Bronze Black 3 Gray 4 White 5 Platinum Accessories PC(X) 6,7 Button photocontrol replace X with 1 - (10V), - (08V), 3 - (40V), 4 - (77V) TL Touch latch (HID, CFL only) LP 1 Lamp included F(X) 6 Fusing replace X with 1 - (10), - (08), 3 - (40), 4 - (77) QST Time delay quartz stand by system with lamp EM DC bayonet socket (for remote power by others) EM1 MR11/MR16 two pin socket (for 1V power by others) EM1 Two MR11 or MR16 two pin sockets (for 1V power by others) BBU-XXX 3 Ballast back-up 10 or 77V (specify voltage)(-4 F) BOC-XXX Ballast back-up 10 or 77V (specify voltage)(3 F) BOC-LED Ballast back-up for egress (3 F) A A B C 16.0 1.15 9.0 (406mm) (308mm) (9mm) B C LMC-SPC Polycarbonate shield PBT-1 10V button PC PBT-34 08/40/77V button 1 For Lamp Included option on fluorescent: indicate desired wattage: 4F - LP4, LP3, LP6; 84F - LP84(x4w), LP64 (x3w), LP5 (x6w). Lamps not included. 3 BBU option provides integral ballast back-up and operates one fluorescent lamp at up to 150 lumens for a minimum of 90 minutes. Operation is reliable between -4 F and +131 F. Maximum output is achieved when the lamp temperature is 77 F. Eliminates the need for remote batteries or additional fixtures. On two lamp units (x6w, x3w, x4w) battery powers one lamp to 150 lumens. 4 Two lamp fluorescent units have two electronic ballasts. Field wiring can provide switching for 50% fixture output if desired. 5 50hz standard on electronic MH or Fluorescent. 6 0 in voltage selection indicates less ballast. 7 PC is only option available in LED model. 5
Laredo LLC Series The large Laredo can be mounted from 16-5 feet with HID lamps or lower for egress applications with twin fluorescent lamps and redundant battery back up. Series is capable of up to 400w energy-saving Pulse Start and HPS. User-friendly maintenance options such as the touch latch door (also available on the midsize) allow easy service. APPLICATION Full cutoff, IDA compliant perimeter lighting LLC is listed to UL1598 for use in wet locations Ordering Information ORDERING EXAMPLE: LLC-30P8-1-TL-LP LLC 30P8 1 TL LP Series Wattage/Source/Voltage Finish Options LLC Laredo Large Cutoff ELECTRONIC FLUORESCENT 64F8 x6w / x3w / 10-77V PULSE START MH 50P8 50w 10-77V 50P5 50w 480V 50P6 50w 10/77/347V 30P8 30w 10-77V 30P5 30w 480V 30P6 30w 10/77/347V 350P8 350w 10-77V 350P5 350w 480V 350P6 350w 10/77/347V 400P8 400w 10-77V 400P5 400w 480V 400P6 400w 10/77/347V HIGH PRESSURE SODIUM 50S8 50w 10-77V 50S5 50w 480V 50S6 50w 10/77/347V 50SV 50w Five Tap 400S8 400w 10-77V 400S5 400w 480V 400S6 400w 10/77/347V 400SV 400w Five Tap 1 Dark Bronze Black 3 Gray 4 White 5 Platinum *Available on 50w fixtures and below **Specify 10 or 77V PHOTOCONTROL * PC1 Button photocontrol 10V OPTIONS QST Time delay quartz stand-by, with lamp EM DC Bayonet socket only (Use 150w max lamp) TL Touch Latch BBU(XXX) ** Battery back up (-4 F rated) for one CFL lamp BBU(XXX) ** Battery back up (-4 F rated) for two CFL lamps BOC(XXX) ** Battery back up (0 C rated) for one CFL lamp BOC(XXX) ** Battery back up (0 C rated) for two CFL lamp LP Lamp included with fixture. On CFL specify LP5 or LP64 Accessories LLC-SPC Polycarbonate shield PBT-1 10V button PC PBT-34 08/40/77V button PTA-1 External photocontrol 10V (Use for 30w and above) PTA-8 External photocontrol 10-77V (Use for 30w and above) PTA-5 External photocontrol 480V (Use for 30w and above) Use for 50P or 64F Units Dimensions A A B C 19.0 14.75 11.0 (483mm) (375mm) (79mm) B C 6
Laredo Photometrics LCC 4F 8ft mounting height IES report 063 4w CFL 300 Lumens 16ft 8ft 0 8ft 16ft Design & Build Solutions LMC18LU-5K 1ft mounting height IES report LMC18LU-5K.IES 44.5w LED 039 Lumens 35ft 30ft 0ft 10ft 0 10ft 0ft 30ft 35ft 5 1.5 8ft 16ft Cimarron All new LED area/site lighter. Highly efficient LED technology in a unique cast aluminum housing for years of maintenance free operation. Made in the USA. 10ft 1.5 0ft 5ft Medallion Decorative styling featuring the Southwest die cast aluminum ribs. Full cutoff distributions for IDA compliant lighting. Complete with arm and lamp. LMC 150P 15ft mounting height 150w PS 14000 Lumens 45ft 30ft 15ft 0 15ft 30ft 45ft Square Straight Steel poles, made in the USA and drilled to accept Cimarron or Medallion fixtures. Powder paint finish protected by heavy cardboard shipping wrap. LLC 400P 5ft mounting height IES report 07R 400w PS 44000 Lumens 5 1.5 1.5 75ft 50ft 5ft 0 5ft 50ft 75ft 15ft 30ft 45ft 5ft 50ft Tempe Round & Square bollards with Southwest cast aluminum ribbed design top. Direct optics for visual comfort. Lamp included. Laramie Laramie flood family features Southwest styling in three sizes from 1w LED to 1000w HID. Fixtures are available with wide soft beam spread. Lamps included. 75ft 7
701 Millennium Boulevard Greenville, SC 9607 Tel: 864.678.1000 Fax: 864.678.1417 www.spaulding-ltg.com ALERA LIGHTING ARCHITECTURAL AREA LIGHTING BEACON PRODUCTS COLUMBIA LIGHTING COMPASS PRODUCTS DEVINE LIGHTING DUAL-LITE HUBBELL BUILDING AUTOMATION HUBBELL INDUSTRIAL LIGHTING HUBBELL OUTDOOR LIGHTING KIM LIGHTING KURT VERSEN LIGHTCONTROL PRESCOLITE SPAULDING LIGHTING SPORTSLITER SOLUTIONS STERNER LIGHTING SYSTEMS Due to our continued efforts to improve our products, product specifications are subject to change without notice. HOL0005 K REV.11