Evolve LED Roadway Lighting

Transcription

1 GE Lighting Evolve LED Roadway Lighting LED Project Grade Streetlight () imagination at work

2 Product Features The Evolve LED Streetlight is optimized for customers requiring a basic LED solution for local and collector roadways. GE s unique reflective optics are designed to optimize application efficiency and minimize glare. The modern design incorporates the heat sink directly into the unit for heat transfer to prolong LED life. This reliable unit has a 50,000 hour rated life, significantly reducing maintenance needs and expense over the life of the fixture. This efficient solution lowers energy consumption compared to traditional HID fixture for additional operating cost savings. Applications Designed to meet recommended luminance and illuminance requirements for local and collector roadway / street classifications. Housing The modern design incorporates the heat sink directly into the unit for heat transfer. Meets 3G vibration standards per ANSI C Metal door assembly with tool less latch. LED & Optical Assembly Structured LED array for optimized roadway photometric distribution. Evolve light engine consisting of reflective technology designed to optimize application efficiency and minimize glare. Utilizes high brightness LEDs, 70 CRI at typical. LM-79 tests and reports are performed in accordance with IESNA standards. Lumen Maintenance Projected L87 (0K) 50,000 at Ta 5C Projected L70 (0K) > 00,000 at Ta 5C Based on 0,000h LM-80 data for Lumiled Luxeon-T (ZES chip family) Ratings / listed, suitable for wet locations per UL 598. IP65 rated optical enclosure per ANSI C Temperature rated at 40 to 40 C. Upward Light Output Ratio (ULOR) = 0 Compliant with the material restriction requirements of Ro. Mounting Slipfitter with +/- 5 degree of adjustment for leveling. Integral die cast mounting pipe stop feature. Adjustable for 5 in. or in. mounting pipe. Finish Corrosion resistant polyester powder painted, minimum.0 mil. thickness. Standard colors: Black and Gray. RAL & custom colors available. Electrical 0-77 volt. System power factor is >90% and THD <0%.* Class A Sound rating. Surge Protection per ANSI C Standard: 6Kv/3kA Basic (w/extended C6.4 Combination Wave capacity of 0 events) - Optional: 0kV/5kA Enhanced Photo electric sensors (PE) available for all voltages. * System power factor and THD is tested and specified at 0V input and maximum load conditions. Ambient Temperature Conversion Table AMBIENT TEMPERATURE ( C) INITIAL LUMENS FACTOR INITIAL WATTS FACTOR

3 Ordering Number Logic Evolve LED Project Grade Streetlight () E R X PROD. ID VOLTAGE OPTICAL CODE PHOTOMETRIC TYPE DRIVE CURRENT LED COLOR TEMP PE FUNCTION COLOR OPTIONS E = Evolve R = Roadway X = Project Grade = Single Module Optical Assembly 0 = 0-77* = 0 = 08 3 = 40 4 = 77 * Fusing not available with Voltage 0 Product Tier * = Project Grade See Charts for all levels A = Extra Narrow 5 = 55mA 40 = Asymmetric B = Narrow Asymmetric (Medium) B = Narrow Asymmetric Wide Pole Spacing C = Asymmetric (Short) D = Asymmetric Forward D = Asymmetric Forward Wide Pole Spacing E = Asymmetric (Medium) E = Asymmetric (Medium Wide Pole Spacing = PE Receptacle 4 = PE Receptacle & Shorting Cap 5 = PE Receptacle & PE Control A = ANSI C pin Dimming Receptacle D = ANSI C pin Dimming Receptacle with Shorting Cap GRAY = Gray BLCK = Black D = Wired Dimming E = External Bubble Level F = Fusing G = Internal Bubble Level R = Additional Secondary Surge Protection Device XXX = Special Options PRODUCT ID OPTICAL CODE PHOTOMETRIC TYPE TYPICAL SYSTEM TYPICAL INITIAL WATTAGE LUMENS BUG RATINGS 0-77V IES FILE NUMBERS A _AA540.ies C _CA540.ies D A _DA540.ies F _FA540.ies G _GA540.ies A _AB540.ies C _CB540.ies D B _DB540.ies F _FB540.ies G _GB540.ies B _BB540.ies B E _EB540.ies A _AC540.ies C _CC540.ies D C _DC540.ies F _FC540.ies G _GC540.ies A _AD540.ies C _CD540.ies D D _DD540.ies F _FD540.ies G _GD540.ies B _BD540.ies D E _ED540.ies A _AE540.ies C _CE540.ies D E _DE540.ies F _FE540.ies G _GE540.ies B _BE540.ies E E _EE540.ies NOTES: Max Operating Temp 40 C Lumen Maintenance Projected L87 (0K) 50,000 at Ta 5C Projected L70 (0K) > 00,000 at Ta 5C Based on 0,000h LM-80 data for Lumiled Luxeon-T (ZES chip family)

4 Photometrics Evolve LED Streetlight () Extra Narrow Asymmetric (GA) 9400 Lumens _GA540 ISO Plot Polar Curve CU Graph of maximum candlepower at 85 of 7 Narrow Asymmetric (GB) 9600 Lumens _GB of maximum candlepower at 85 of 70 Asymmetric Short (GC) 9600 Lumens _GC of maximum candlepower at 0 of 35 Asymmetric Forward (GD) 9400 Lumens _GD of maximum candlepower at 5 of 4

5 Photometrics Evolve LED Streetlight () Asymmetric Medium (GE) 9600 Lumens _GE540 ISO Plot Polar Curve CU Graph of maximum candlepower at 80 of 7 Narrow Asymmetric (EB) 7600 Lumens _EB of maximum candlepower at 80 of 70 Asymmetric Forward (ED) 7600 Lumens _ED of maximum candlepower at 60 of 69 Asymmetric Medium (EE) 7900 Lumens _EE of maximum candlepower at 80 of 7

6 Product Dimensions Evolve LED Streetlight () in. [59 mm] 4 in. [360 mm] 5 in. [3 mm] TOP VIEW Adustable for /4 to in. mounting pipe (.660 to.375 inch OD) [4 to 60 mm] 4.7 in. [ mm] 5 in. [40 mm] 4 in. [3 mm] 4 in. [360 mm] FRONT VIEW SIDE VIEW in. [59 mm] in. R [38 mm R] BACK VIEW DATA Approximate net weight: 5 lbs (6.8 kgs) Contact manufacturer for specific configuration weight. Effective Projected Area (EPA): sq ft max (0.065 sq m) GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of the General Electric Company. 05 GE. OLP3069 (Rev 03/8/5)