Quality Clockmakers' Supplies Barometer Parts and Materials

M&P Quality Clockmakers' Supplies Barometer Parts and Materials Please be aware that this document remains available for reference purposes only. This document is outdated and therefore any prices or information within should not be relied upon. An up-to-date version of this document can be found here: http://www.m-p.co.uk/viewcat.htm For our current catalogue, scan QR code to the left or click here: http://www.m-p.co.uk/current-catalogue.pdf For our current pricelist, scan QR to the right or click here: http://www.m-p.co.uk/current-prices.pdf Tel: 01273 421321 Fax: 01273 421322 Automated sales: 0800 328 9435 Email: sales@m-p.co.uk http://www.m-p.co.uk Meadows & Passmore Ltd

Case ornamentation BRASS HANDLES For carriage and bracket clocks. The wires can be adjusted slightly to suit existing handle centres. 54 x 36mm 0438 543615 62 x 25mm 0438 622515 4.80 8 P&P units 2.90 8 P&P units BRASS ESCUTCHEONS HANDLES, LOCKS & LATCHES For longcase doors. 3 3/4" long, 1" wide. Solid brass. 0688 000115 4.60 1 P&P unit Polished and lacquered flat brass escutcheon for small locks on bracket and grandmother clocks, musical boxes and jewellery cases. 25mm x 10mm x 1mm. 0683 000115 1.70 1 P&P unit 62 x 27mm 0438 622715 2.90 5 P&P units Oval brass escutcheon. 36mm high x 27mm wide. 0458 362715 4.70 1 P&P unit 88 x 35mm 0438 883515 Flat brass escutcheon. 1mm thick. 3.60 5 P&P units 0458 305015 2.20 1 P&P unit KEYHOLE INSERT Solid brass insert. 10mm x 18mm. 0457 003415 1.60 1 P&P unit BRASS BOX CORNERS Solid brass, suitable for musical boxes and writing slopes. A mm B mm 15 7 0997 150715 25 11 0997 251115 35 12 0997 351215 45 14 0997 451415 55 16 0997 551615 BRASS MIRROR PLATE Solid brass. 3.9cm width. 3.9cm height. 0557 003215 B A BRASS DOOR LATCH FOR O.G. & STEEPLE CLOCKS. Solid brass construction. 0224 000115 4.80 1 P&P unit ROUND BRASS DOOR LATCH Suitable for almost any clock door. 0227 000115 4.80 1 P&P unit 1.60 1.80 1 P&P unit 1 P&P unit BRASS DOOR KNOB Gothic style. 2.00 1 P&P unit 0459 000115 2.70 1 P&P unit 2.10 1 P&P unit 2.20 1 P&P unit BRASS DOOR CATCH For American & German clocks. 0225 000115 1.85 1 P&P unit 2 PIECE BEZEL LATCH Knob screwed to bezel fits into catch. 0936 000115 0.65 1 P&P unit 3.60 1 P&P unit BRASS PENDANT KNOBS BRASS TURNS For drop dial clock doors etc, 0476 000115 0.25 1 P&P unit A. Screw mounting 23mm drop 0458 002315 B. With mounting plate 32mm drop 0458 003215 C. Antique style 38mm drop 0458 003815 55mm drop 0458 005515 BRASS DOOR HOOKS & EYES Left handed means that the eye goes on the door and the latch fits the left of the case. 3/4" L.H. 0226 103415 3/4" R.H. 0226 203415 1" L.H. 0226 110015 1" R.H. 0226 210015 M&P 2003 C 2.25 2 P&P units 4.80 2 P&P units BRASS PIVOT HINGES For Steeple clocks. Sold in pairs. 0238 000215 2.40 1 P&P unit LONGCASE HOOD BLANK Solid brass. Sold in pairs. 5.20 2 P&P units 0524 000115 2.05 1 P&P unit 8.60 2 P&P units REPEAT KNOB Typical bracket style, solid brass. 15mm long, 10mm at the widest point. Recessed for knot. 0449 000115 2.20 1 P&P unit 0.60 1 P&P unit 0.60 1 P&P unit 0.70 1 P&P unit 0.70 1 P&P unit CARRIAGE CLOCK DOOR KNOB Knurled brass knob with threaded stem. 6mm diameter head. 4mm deep. 0722 000115 1.80 1 P&P unit Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322 9/1

BRASSWARE & FITTINGS Case ornamentation PRESSED BRASS HINGES For clock doors. Measured open. Sold individually. Ht. Width 1/2" x 1/2" 0456 121215 3/4" x 1/2" 0456 341215 BUTT HINGES Solid brass. Unequal sides. Width 13/16" + 9/16". Sold individually. Height 1" 0478 002515 1 1/4" 0478 003215 STRAP HINGE Made from solid polished brass. 73mm long x 38mm high. Plate size 20 x 20mm. 0719 000115 12.50 4 P&P units 45mm high x 20mm wide 0432 452015 6.50 8 P&P units SPIRE & EAGLE BALLS Polished brass ornaments complete with wood screw in base. Height excludes the screw. Small balls are 28mm wide, larger are 48mm. Spire 75mm 0277 075015 Spire 115mm 0277 110015 Eagle 75mm 0278 075015 Eagle 115mm 0278 110015 CAST BRASS ROSETTES Suitable for pinning to wood. CAST BRASS FINIALS Dia. Part number Height excludes screw. 25mm 0439 002515 1.50 1 P&P unit 25mm high x 12mm wide 36mm 0439 003615 1.70 1 P&P unit 0432 251215 2.90 1 P&P unit PRESSED BRASS ROSETTES Complete with pin. Dia Part number 35mm high x 18mm wide 14mm 0440 001415 1.25 1 P&P unit 17mm 0440 001715 1.30 1 P&P unit 0432 351815 3.90 5 P&P units 20mm 0440 002015 1.35 1 P&P unit 30mm 0440 003015 1.60 1 P&P unit 50mm 0440 005015 2.30 5 P&P units 70mm high x 35mm wide 0432 703515 10.60 26 P&P units Burgundy 0935 120615 1.70 1 P&P unit Green 0935 120607 1.70 1 P&P unit MOVEMENT STRAP For securing French movements to their cases. 150mm long. Includes a 4BA 2" screw. Sold individually. 0305 000115 LONGCASE SEATBOARD HOOK Steel wire with brass nut. 1/8" 3.2mm 0276 0000215 5/32" 4mm 0276 000115 PIN-ON BUTTONS Sold in packs of 12. 2.30 1 P&P unit 1.50 1 P&P unit 0.55 1 P&P unit 0.80 1 P&P unit 7.60 1 P&P unit 8.90 1 P&P unit Flower Oxidised brass 17mm diameter. 0698 000115 4.45 2 P&P units 20% POLISHED BRASS PILLAR CAPS Capitals. Max height 20mm Pillar Base Part dia. width number 19mm 31mm 0279 193115 22mm 31mm 0279 223115 25mm 35mm 0279 253515 28mm 41mm 0279 284115 PERFORATED BRASS SHEET Polished on one side. For fretwork in doors and sides of clock cases. 300 x 145mm sheets. 0571 120615 12.40 34 P&P units BACKING FABRIC 12" x 6" pieces of synthetic backing silk. REEDED BRASS TUBE Ready for polishing and lacquering, this brass tube is ideal as a replacement for any architectural style clock case needing new columns. It fits pillar cap 0279 193115. Specifications: 3/4" diameter. 0.32" wall thickness. 9" long. AMERICAN METAL BACKPLATE For clocks that imitated the French. 4 1/2" 0525 045015 5 1/4" 0525 052515 6.90 6.90 5 P&P units 5 P&P units OFFICE DIAL CASE PEG Turned beech. Tapers from 10mm at the shoulder to 6mm at the tip. 0312 000115 1.20 1 P&P unit 7.95 5 P&P units 8.95 6 P&P units 7.55 5 P&P units 8.65 8 P&P units 6.40 3 P&P units 6.90 3 P&P units 7.90 3 P&P units 8.40 3 P&P units Tube 0691 340915 5.10 10 P&P units 1.25 1 P&P unit Pillar cap 0279 193115 6.40 3 P&P units 9/2 Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322 M&P 2003 5+ 15%

Case ornamentation WALL CLOCK CASE PARTS VIENNA STABILIZERS Sold in pairs, suitable for all sizes of Vienna clock. 0450 000215 7.95 1 P&P unit VIENNA SCALE Enamelled 76mm x 31mm 0411 763115 VIENNA REGULATOR ORNAMENTS Dark resin. 'Eagles' 110 x 180 wide 1043 000115 145 x 180 wide 1043 000215 'Horses' 170 x 145 wide 1044 000115 210 x 210 wide 1044 000215 9.60 14 P&P units 10.60 18 P&P units 10.90 14 P&P units 4.90 1 P&P unit 13.90 20 P&P units Porcelain 56 x 22mm 0411 562215 70 x 24mm 0411 702415 BRASS VIENNA SCALE Solid brass scale or beat plaque to show the swing of the pendulum. 77mm x 32mm. Numerals and scale are recessed for filling with engravers wax if required. 0411 000215 4.10 1 P&P unit VIENNA MOVEMENT FASTENERS 4mm steel screw with knurled brass head. 54mm long. Nickel plated plates. Sold in pairs. 0652 000115 5.10 1 P&P unit UNFINISHED VIENNA REGULATOR CROWNS Ready to be stained/polished. Crown No. 1 Made of solid hand-carved walnut, ready for polishing. 300mm x 87mm. 0649 000115 24.90 20 P&P units Crown No 3 Walnut veneered, ready for assembly and finishing. 350mm x 230mm 0649 000315 33.90 41 P&P units Crown No 4 Quality ply, ready for assembly and finishing. 370mm x 268mm 0649 000415 44.40 58 P&P units 9.85 1 P&P unit 9.85 1 P&P unit WOODEN ROSETTES Pressed. Size Part number 31 x 9mm 0699 003115 43 x 12mm 0699 004315 60 x 9mm 0699 006015 CAST VIENNA MASK Made from a compound that can be stained & varnished. 40 x 53 x 20mm 0700 000115 6.45 3 P&P units HIGH QUALITY VIENNA CROWNS Finished and ready for waxing to match the case. Beautifully hand made to match antique cases. Crown no. 6 440mm x 150mm 0649 000615 44.90 249 P&P units Crown no. 7 440mm x 175mm 0649 000715 48.90 249 P&P units Crown no. 8 360mm x 125mm 0649 000815 46.90 249 P&P units 2.50 1 P&P unit 2.80 2 P&P units 3.00 2 P&P units UNFINISHED VIENNA REGULATOR BOTTOM Ready for sanding & polishing. Bottom No 2 Made from solid walnut and ready for polishing. 80mm high. 166mm x 116mm at the top. 74mm x 67mm at the bottom. 0649 000215 25.90 19 P&P units Bottom No 11 Solid walnut exterior. Pre-sanded. Height 95mm. Top 195 x 120mm. Bottom 50 x 50mm. 0649 001115 35.60 22 P&P units M&P 2003 Crown no. 9 350mm x 145mm 0649 000915 46.90 249 P&P units HIGH QUALITY VIENNA BOTTOM Finished and ready for waxing to match the case. Bottom no. 10 Height 120mm. Top 240mm x 120mm Bottom 125mm x 65mm 0649 001015 48.90 249 P&P units Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322 9/3

FEET & HANDLES, FINIALS Case ornamentation BUN FEET Solid brass, polished. All 12mm high. Dia. Part number 15mm 0572 151215 19mm 0572 191215 25mm 0572 251215 29mm 0572 291215 31mm 0572 311215 BRASS CADDY FOOT Solid brass. 13mm 0328 000215 19mm 0328 000115 BRASS KNOB OR FOOT No 2 3/8" wide by 3/8" high, excluding woodscrew. 0459 000215 2.05 1 P&P unit BRASS FOOT OR KNOB No. 3 1/2" Wide. 1/2" High excluding woodscrew. 0459 000315 WOODEN FINIALS Made from turned beech. 2.40 1 P&P unit 2.60 1 P&P unit 2.80 1 P&P unit 3.10 1 P&P unit 3.45 3 P&P units 2.30 4 P&P units 2.40 5 P&P units BRACKET FOOT 4+ Plain polished brass.12mm high. Base 15% sides 28mm long. Upper sides 40mm. 4+ 20% 0437 454015 3.20 1 P&P unit 'AMERICAN' CAST FEET Cast from hard metal and spray gilded to suit American copies of French marble clocks. 60x60x55mm. 20mm from ground to bottom of clock. Sold in sets of four. 0574 000415 13.80 20 P&P units LIONS HEAD HANDLES Cast from hard metal and spray gilded. 2" x 2 1/4" excluding ring. Not suitable for carrying the clock with! Sold in pairs. 0573 000215 12.60 20 P&P units EARS FOR DROP DIAL CLOCKS Hand carved from hardwood, ready for finishing. Suits most drop dial cases. 60mm x 240mm at the widest points. Sold in pairs only. 0534 000215 2.60 1 P&P unit 17.90 14 P&P units No. Height Width Part no. 1 22mm 10mm 0526 000115 2 33mm 20mm 0526 000215 3 40mm 20mm 0526 000315 4 51mm 30mm 0526 000415 5 60mm 26mm 0526 000515 6 74mm 38mm 0526 000615 7 81mm 52mm 0526 000715 8 82mm 44mm 0526 000815 9 97mm 39mm 0526 000915 10 120mm 49mm 0526 001015 11 76mm 44mm 0526 001115 12 79mm 40mm 0526 001215 13 54mm 32mm 0526 001315 14 96mm 45mm 0526 001415 15 64mm 44mm 0526 001515 17 103mm 49mm 0526 001715 18 52mm 48mm 0526 001815 19 71mm 46mm 0526 001915 20 78mm 45mm 0526 002015 21 30mm 51mm 0526 002115 22 38mm 74mm 0526 002215 23 40mm 67mm 0526 002315 24 43mm 64mm 0526 002415 25 37mm 72mm 0526 002515 26 33mm 65mm 0526 002615 27 25mm 33mm 0526 002715 1.85 1 P&P unit 2.25 1 P&P unit 2.15 1 P&P unit 2.45 1 P&P unit 2.45 1 P&P unit 3.45 3 P&P units 6.10 4 P&P units 5.25 3 P&P units 3.90 3 P&P units 6.10 5 P&P units 4.90 4 P&P units 5.80 4 P&P units 6.35 4 P&P units 4.90 4 P&P units 3.95 4 P&P units 4.95 4 P&P units 4.90 4 P&P units 3.95 4 P&P units 2.95 4 P&P units 1 2 3 4 5 7 8 9 10 12 13 14 15 18 19 20 21 23 24 25 26 We can supply other wooden finials to special order. If you do not see what you want, please send a sketch and we will let you know what we can offer. 6 11 17 22 27 9/4 Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322 M&P 2003

Case ornamentation CLOCK CASE PARTS CUCKOO BIRDS Plastic body with moving bill. Painted wings. 78mm long. Metal foot & clamp screw. Multi-coloured. 0610 007815 2.65 1 P&P unit Wooden bird for cuckoo clocks. Coloured bill, but rest of bird needs painting to suit. No moving wings. 20mm high. 87mm long. 0610 208715 CUCKOO CLOCK TOPS Carved wooden tops for cuckoo clocks. Unstained, but sanded and ready to fit. 215mm x 130mm 0951 021515 13.30 19 P&P units 240mm x 155mm 0951 024015 13.95 21 P&P units 295mm x 185mm 0951 029515 17.60 22 P&P units...or anti-clockwise Numbered and going anti-clockwise, the 'Blackstone' clock is an amusing and reliable timepiece; hang one on the wall and see who notices! Battery operated quartz wallclock. Circular white plastic case with metal dial. Often to be seen in bars, hotels and kitchens. STAGS HEAD & ANTLERS Plastic stags head with antlers finished with dark varnish appearance. As used on modern reproductions of cuckoo clocks. Height includes antlers. 110mm 0962 011015 5.10 10 P&P units 130mm 0962 013015 Not available 150mm 0962 015015 4.40 1 P&P unit 7.90 15 P&P units 0213 000115 13.90 40 P&P units GLASS RETAINING STRIPS 12" strips of wood to hold glass in position on O.G's etc. 1/4" x 1/ 8". Packs of four strips. 0937 000415 89089089012 89089089012 89089089012 89089089012 89089089012 89089089012 89089089012 89089089012 89089089012 89089089012 MARBLE EFFECT PAPER For covering imitation marble pillars etc. Simply glue in place and varnish over with ordinary lacquer. Appx. 6" x 21" sheet. 1033 062115 3.90 8 P&P units 2.95 2 P&P units WOODEN LONGCASE FEET Set of four quality replacement feet for Longcase clocks. Front feet 90mm x 90mm x 65mm high. Rear feet allow the case to touch the wall, so are only 55mm x 65mm x 65mm high. Ready for polishing. Mahogany 1159 000413 39.20 54 P&P units Oak 1160 000415 39.20 54 P&P units SETTING UP & REGULATING PENDULUM CLOCKS How many times have you had to explain to customers that they don't need to put a coin under one corner? Hand out a copy of this leaflet with every repair, after stamping your name in the box provided, and cut down on wasted time. It will stay with the clock and ensure your name is there when it needs servicing again. Sold in packs of 100 double sided A5 leaflets. 0477 010015 4.95 9 P&P units SETTING UP AND REGULATING ANNIVERSARY CLOCKS To compliment our setting up sheet for conventional clocks, this sheet describes the siting, regulation and setting up of 400 day or Anniversary clocks. Hand one out with every 400day repair, after stamping your name in the box provided, and cut down on wasted time. It will stay with the clock and ensure your name is there when it needs servicing again. Sold in packs of 25 double sided A5 leaflets. 0986 002515 M&P 2003 2.10 5 P&P units Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322 9/5

CABINET LOCKS & KEYS Case ornamentation CABINET MORTICE LOCK & KEY Solidly constructed brass lock & key for clock cases and small boxes. Mortice type. 52mm key. Face plate 8mm x 46mm. Complete with escutcheon. Box 17mm x 27mm x 4mm. L/H 0651 000115 5.90 3 P&P units R/H 0651 000215 5.90 3 P&P units CUT DOOR LOCKS Brass construction with steel key. 1 1/2" Lock Faceplate 10mm x 38mm Box plate 28mm x 38mm Box 23mm x 25mm x 6mm 2" Lock Faceplate 10mm x 51mm Box plate 28mm x 51mm Box 25mm x 32mm x 6mm Type Hand Part no. 1 1/2" L 0687 011215 2" L 0687 020015 2" R 0687 020018 BRACKET CLOCK CUT LOCK - Double handed Solid brass lock for bracket clocks whose keyholes are on the side of the case. Also suitable for musical boxes & jewel cases etc. Faceplate 8 x 38mm. Box plate 19 x 38mm. Box 18 x 25 x 6mm. Antique pattern forged key. 0682 000115 9.90 2 P&P units MINI CUT LOCK - Double handed Brass, with locking pin which fits into the door or lid to be secured. Ideal for small writing slopes and jewellery boxes. Faceplate 6 x 40mm. Box plate 18 x 40mm. Box 15 x 28 x 4mm. 0998 000115 5.40 1 P&P unit 6.20 6.40 2 P&P units 2 P&P units BOX MORTICE LOCK -Double handed Brass lock with key and escutcheon. Catch fits into the door or lid to be secured. Faceplate 8mm x 46mm. Box 15 x 28 x 4mm 6.40 2 P&P units 0998 000215 6.90 1 P&P unit Cut locks: These are cut into the back of the door or drawer leaving the outer box and faceplate visible. Mortice locks: These are cut into the edge of the door or drawer leaving just the faceplate visible. Handing: Based on the English handing system, a lock is described as left or right hand when the bolt shoots to the left or right. i.e. the bolt of a lefthand lock shoots to the left when locked. Double-handed locks are suitable for both left and right hand fitting. DOOR KEY BLANKS A range of key blanks to suit clocks and antique furniture etc. Most old cabinet locks are easy to cut a key for, but if necessary they can be taken to any locksmith. Most locksmiths only stock modern style blanks. Plain oval bow - Steel LengthPart number 1" long 0436 100015 1 1/4" 0436 114015 1 1/2" long 0436 112015 2.60 1 P&P unit 2.70 1 P&P unit 2.80 1 P&P unit Cast fancy keys - Nickel steel alloy Ni/Fe105 (shown actual size) Length Style Part number 25mm 1 0436 002515 3.80 1 P&P unit 35mm 4 0436 003515 4.40 1 P&P unit 45mm 6 0436 004515 5.10 1 P&P unit 54mm 8 0436 005415 5.80 1 P&P unit 55mm 10 0436 005515 6.20 2 P&P units 69mm 9 0436 006915 6.90 2 P&P units Plain oval Style 1 (25mm) Style 4 (35mm) Style 6 (45mm) Style 8 (54mm) Style 10 (55mm) Style 9 (69mm) 9/6 Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322 M&P 2003