FOR SEWGE TECNICL DT Impeller type: Vortex. Solid handling: 1 mm. Nominal power: 1,1 11. Outlet: DN / / 1. Perfomance range: from.3 to 1 m3/h with 1 meters head. Fluid: wastewater and sewage from buildings and sites in private, commercial, industrial areas. Fluid P:. 1. Fluid temperature range: from to + C. For higher temperature please contact our sale offices. Max installation depth: mt (with a proper cable length). Type of installation: fixed by Coupling Unit, portable in vertical position with pedestal. Continuous working with total submerged applications, or discontinuous S3 with respect of minimum levels. pprovals: EN 1-1 e Ex (TEX, IECEx). PPLICTIONS Design for the pumping of wastewater and sewage from buildings and sites in private, commercial, industrial areas in accordance with European Standard EN 1-1. PUMP CONSTRUCTION Vortex impeller with maximum solids handling with new no-clogging shape. Single-unit cartridge seal with double mechanical seals, SiC-SiC at the pump side, SiC-C at the motor side. ll seals are independent of rotation direction. DN, DN, DN 1 radial slot EN 19-1 flange discharge. Liquid Viscosity: 1mm/s MOTOR CONSTRUCTION Premium Efficiency IE3, three-phase, squirrel-cage motor. Continuously S1 rated motor in submerged applications, or discontinuous S3 according to minimum levels. Seal monitoring by a moisture sensor in the seal chamber, which signals an inspection alert if there is leakage at the mechanical seals (optional). Bi-metallic switch in stator windings, with max temperature (1 C). Start-up: 1.1 -. = direct on line (DOL);. - 11. = star-delta (Y/ ). Lubricated-for-life bearings with a calculated lifetime of minimum, hrs. Stainless steel shaft. Designed with high resistance fatigue fracture. Degree of protection: IP Insulation class: F Max starting /hours: MTERILS 1 N PRTS MTERILS 1 andle Stainless steel (ISI 3) 3 Electric cable 7RN-F 3 Screws Stainless steel (ISI 3) OR NBR Mechanical seal pump side SiC/SiC Mechanical seal motor side SiC/Carbon Ring Seal* NBR Motor Shaft Stainless steel (ISI ) 7 Pump body / motor Cast iron (EN GJL ) Impeller Cast iron (EN GJL ) 9 Coating crylic two-component μm * only from 3 poles and from poles 7 9 DB PUMPS reserves the right to make modifications without notice. 7
- Denomination index: (example) FK C T 3D Ex S DIGITS FK C V Technical pump range name Single channel impeller Vortex impeller 1 1 Outlet diameter pproximate nominal power x1 (a, b, c, d in case of different curve at same power) Number of poles T 3-77 3-3 -77 3- EX S,3, Three-phase Tension frequency = hz - = hz D.O.L. D.O.L. D.O.L. D.O.L. Y/D Y/D Y/D Y/D Tension rate & Start method No explosion proof Explosion proof (TEX) No sensor version (moisture sensor) Sensor version (moisture sensor) NOT for Ex version Cable lenght 1m Specific cable lenght STNDRD ND OPTIONS STNDRD OPTIONS MINS VOLTGE 3 x V~ 3 x 3 V~ VOLTGE TOLERNCE + % / -1 %, z - TEMPERTURE MONITORING BY BI-METLLIC SWITC IN TE STTOR WINDINGS 1 C - MECNICL SEL (T PUMP SIDE) SiC/SiC - MECNICL SEL (T MOTOR SIDE) SiC/Carbon - MOISTURE SENSOR - YES CBLE LENGT (M) 1-3- PPROVLS EN 1-1 Ex (TEX, IECEx ) O-RING NBR FKM (Viton ) INSTLLTION Wet well - DB PUMPS reserves the right to make modifications without notice.
PERFORMNCE RNGE The performance curves are based on kinematic viscosity values = 1 mm /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 99. GRPIC SELECTION TBLE RNGE FOR SEWGE 1 3 Q US gpm kpa 3 m 3 1 3 Q IMP gpm ft 1 1 3 3 1 1 1 1 1 1 1 1 1 1 3 Q l/s Q m 3 /h 1 1 Q l/min SELECTION TBLE Q=m 3 /h 7, 1, 1,, 3 3,, 7,, 7 79,, 93, 1, 1 Q=l/min 1 3 7 9 1 1 13 1 1 1 1 11. T D 9,1,7 7,9,7,3,,7 1,. T D 1, 1,3 11, 9,1,,3,7 3. T D 1,1 19, 17,1 1, 11,1,1, 3,,3. T D 7,,, 1,3 1,3 1,1 11,,,, 3, 11. T D 7,,7,1,3, 3,,7 1,9 1,3 1. T D 9, 9,3,9,1 7,,1, 3,9 3,,3 1,9. T D (m) 11, 11, 11,3 1, 1, 9,1,,9,,7 3,7,. T D 17, 17,1 1, 1,7 1,9 1, 13,1 1,1 11,1 1, 9,,1 7,1. T D,1 1,1 19, 17,3 1,9 1, 9,7 7,3, 3,7,9. T Y/D 9,1, 7,,1,,3 17, 1, 1, 9, 7,3, 7. T Y/D 3,1 31, 3, 9,1 7,, 1, 1,9 1, 13, 1,,,, 9. T Y/D 3, 3,9 3,1 33,7 31,7 9,, 3,,3 17,3 1,3 11,7 9, 7,7, 11. T Y/D 1, 1,, 39, 37, 3, 3, 9,7, 3,,3 17,3 1, 1,1 1,, Q=m 3 /h, 1,, 3, 7, 7,, 1, 11, 19, 1, Q=l/min, 7 9 1 1 1 19 1 1 3. T D 11, 1,9 9,7,,,9 3,,3 1. T D 1, 13, 1, 1, 9, 7,,,3 3,1 1. T Y/D (m) 1,9 1, 1,9 13, 1, 11,1 9,,,, 1 7. T Y/D 19, 1, 1,3 17, 1, 1, 13,9 1, 1, 9, 7,7 DB PUMPS reserves the right to make modifications without notice. 9
- / POLES - FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m 1 1 3 Q US gpm 1 1 Q IMP gpm ft. DN 3. 1 1. Min submersibility under S3 1% C B D 1 1 1 3 7 Q m 3 /h 3 1 11.. 11. 3.. P M 1 1 3 7 Q m 3 /h % idr 3 11.. 1. 3. 1 3 7 Q m 3 /h 1 1 Q l/s DN n xm1 1 1 Q l/min The performance curves are based on kinematic viscosity values = 1 mm /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 99. RTED VOLTGE z ELECTRICL DT NOMINL In Is η RTED SPEED % MOTOR P rpm/min STRTING 11. T D 3 x V~ 1,3 1,1 1, 3,3 9,9,% 1 DOL 1mt G1.+3x1. T D 3 x V~,, 3,, 19,1 7,% 9 DOL 1mt G1.+3x1 3. T D 3 x V~ 3,3 3,,,7 19,1 7,7% 9 DOL 1mt G1.+3x1. T D 3 x V~,,, 7, 7, 9,1% 9 DOL 1mt G1.+3x1 CBLE SOLIDS NDLING B C D S1 S3 DN FLNGE DIMENSION EN 19-1 PN1 PCKGING DIMENSION M N OLES L/ L/B WEIGT 11. T D 39 3 1 1 1 1 3 3 3 9. T D 39 3 1 1 1 1 3 3 3 9 3. T D 39 3 1 1 1 1 3 3 3 9. T D 7 3 1 1 1 13 3 13 DB PUMPS reserves the right to make modifications without notice. 7
- POLES - FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m 1 3 Q US gpm 1 3 Q IMP gpm ft 1 1. DN 1 1. 1. 3 Min submersibility under S3 1% C B D 3 1 11.. 1. 11.. 1 Q m 3 /h P M 1 Q m 3 /h % idr. 3. 1. 11. 1 Q m 3 /h 1 Q l/s DN n xm1 1 1 1 Q l/min The performance curves are based on kinematic viscosity values = 1 mm /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 99. RTED VOLTGE z ELECTRICL DT NOMINL In Is η RTED SPEED % MOTOR P rpm/min STRTING 11. T D 3 x V~ 1,3 1,1 1, 3, 11,,% 1 DOL 1mt G1.+3x1 1. T D 3 x V~ 1, 1,, 3, 11, 7,% 1 DOL 1mt G1.+3x1. T D 3 x V~,, 3,,7 11, 7,% 1 DOL 1mt G1.+3x1. T D 3 x V~,,,,,,% 1 DOL 1mt G1.+3x1 CBLE SOLIDS NDLING B C D S1 S3 DN FLNGE DIMENSION EN 19-1 PN1 PCKGING DIMENSION M N OLES L/ L/B WEIGT 11. T D 9 33 19 3 1 3 3 3 13 1. T D 9 33 19 3 1 3 3 3 13. T D 9 33 19 3 1 3 3 3 1. T D 79 3 19 7 3 1 13 3 17 DB PUMPS reserves the right to make modifications without notice. 71
- POLES - FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m 1 3 Q US gpm 1 3 Q IMP gpm 11. ft 9. 1 3 3 7. DN 1. Min submersibility under S3 1% C B D 1 1 1 Q m 3 /h 1... 7. 9. 11. P 1 n xm1 E DN M 1 % idr 1 Q m 3 /h 3 1.. 7. 9. 11. 1 Q m 3 /h 1 3 Q l/s 1 1 Q l/min The performance curves are based on kinematic viscosity values = 1 mm /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 99. RTED VOLTGE z ELECTRICL DT NOMINL In Is η RTED SPEED % MOTOR P rpm/min STRTING. T D 3 x V~,,, 7,7 7,,% 9 DOL 1mt G1.+3x1. T Y/D 3 x V~,9,, 11,7 3,,% 9 Y/ 1mt 7G,+3x1 7. T Y/D 3 x V~,3 7, 1, 13,7 1, 9,7% 9 Y/ 1mt 7G,+3x1 9. T Y/D 3 x V~ 1, 9, 1, 1, 119, 9,% 9 Y/ 1mt 7G,+3x1 11. T Y/D 3 x V~ 1,1 11, 1, 1, 11, 91,% 9 Y/ 1mt 7G,+3x1 CBLE SOLIDS NDLING B C D S1 S3 DN FLNGE DIMENSION EN 19-1 PN1 PCKGING DIMENSION M N OLES L/ L/B WEIGT. T D 77 3 1 7 3 1 13 3 1. T Y/D 77 3 1 7 3 1 13 3 1 7. T Y/D 77 3 1 7 3 1 13 3 1 9. T Y/D 3 39 13 1 13 3 11. T Y/D 3 39 13 1 13 3 DB PUMPS reserves the right to make modifications without notice. 7
1 - POLES - FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m 1 3 Q US gpm 1 3 Q IMP gpm ft 7. DN 1 1 1.. Min submersibility under S3 1% n xm1 E DN C B M D x 1 1 1 % idr 3 1 3. 1 1 1 Q m 3 /h 1 1 1 Q m 3 /h 1 1 1 Q m 3 /h 1 3 Q l/s 3. 3..... 7. 7. P 1 1 1 Q l/min The performance curves are based on kinematic viscosity values = 1 mm /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 99. RTED VOLTGE z ELECTRICL DT NOMINL In Is η RTED SPEED % MOTOR P rpm/min STRTING 1 3. T D 3 x V~ 3, 3,,,,7 7,% 1 DOL 1mt G1.+3x1 1. T D 3 x V~,,,,9,,% 1 DOL 1mt G1.+3x1 1. T Y/D 3 x V~,, 7, 11,3,3 9,% 1 Y/ 1mt 7G,+3x1 1 7. T Y/D 3 x V~,3 7, 1, 1,3, 9,% 1 Y/ 1mt 7G,+3x1 CBLE SOLIDS NDLING B C D S1 S3 DN FLNGE DIMENSION EN 19-1 PN1 PCKGING DIMENSION M N OLES L/ L/B WEIGT 1 3. T D 1 7 7 3 13 1 1 3 1 13 3 1 1. T D 1 7 7 3 13 1 1 3 1 13 3 1 1. T Y/D 1 3 9 39 13 7 3 1 1 3 1 13 3 1 7. T Y/D 1 3 9 39 13 7 3 1 1 3 1 13 3 DB PUMPS reserves the right to make modifications without notice. 73
- RINGSTND The Ringstand is useful for portable installation when a rapid pump positioning in the tank is needed, ensuring high stability thanks to a large contact surface. DESCRIPTION GENERL FETURES 1 PCKGING DIMENSION L/ L/B WEIGT RINGSTND Ø33 FK - EN GJL x x 1, - Screws Stainless Steel 3 3 1 - Two Component Coating RINGSTND Ø3 FK x 11, FLNGE DIMENSION EN 19-1 PN1 R1 R R3 R R S1 S3 M N OLES 11. T D 79 1 1 33 3 33 1 1. T D 79 1 1 33 3 33 1 1 3. T D 79 1 1 33 3 33 1 1. T D 1 1 33 713 373 1 1 11. T D 1 1 1 33 3 1 1. T D 1 1 1 33 3 1. T D 1 1 1 33 3 1. T D 77 1 1 33 73 33 1. T D 7 1 1 33 73 33 1. T Y/D 7 1 1 33 73 33 1 7. T Y/D 7 1 1 33 73 33 1 9. T Y/D 991 1 1 33 77 3 1 11. T Y/D 991 1 1 33 77 3 1 1 3. T D 9 19 13 3 3 71 37 1 3 1 1. T D 9 19 13 3 3 71 37 1 3 1 1. T Y/D 113 19 13 3 3 39 1 3 1 1 7. T Y/D 113 19 13 3 3 39 1 3 1 R R DN DN / DN 1 R3 Min submersibility under S3 1% R1 M 1 M 1 R DB PUMPS reserves the right to make modifications without notice. 7
- COUPLING UNIT WIT ORIZONTL OUTLET D-O (DN) The coupling unit devices for fixed installation facilitate the ascent and descent of the pump in the tank. They come complete with all necessary components for installation with the exception of guide rails. DESCRIPTION GENERL FETURES 1 PCKGING DIMENSION L/ L/B WEIGT - EN GJL D-O COUPLING UNIT DN - Screws Stainless Steel - Two Component Coating x 1 1 1, DN P3 P P P P7 P P9 1 S1 S3 11. T D Rp " 1/ 1 11 3 3 3 73 171 3 7. T D Rp " 1/ 1 11 3 3 3 73 171 3 7 3. T D Rp " 1/ 1 11 3 3 3 73 171 3 7. T D Rp " 1/ 1 11 3 3 3 73 171 31 P7 P 3 31 DN-O 1. 3/" P P P9 DN 3 Guide rails Min submersibility under S3 1% 1 P3 DN Screw M1 P DB PUMPS reserves the right to make modifications without notice. 7
- COUPLING UNIT WIT VERTICL OUTLET D-V (DN ) The coupling unit devices for fixed installation facilitate the ascent and descent of the pump in the tank. They come complete with all necessary components for installation with the exception of guide rails. DESCRIPTION GENERL FETURES 1 PCKGING DIMENSION L/ L/B WEIGT D-V COUPLING UNIT DN - EN GJL x - Screws Stainless Steel D-V COUPLING UNIT DN x 99 399 7 31, - Two Component Coating - NBR Rubber Seal D-V1 COUPLING UNIT x DN P3 P P P P7 P P9 1 3 7 9 1 S1 S3 11. T D 1 xø1 1 1 1 73 3 39 3 3 7 3 1 17 1 1" 1/ 1 9 19 3 7 9. T D 1 xø1 1 1 1 73 3 39 3 3 7 3 1 17 1 1" 1/ 1 9 19 3 7 9 3. T D 1 xø1 1 1 1 73 3 39 3 3 7 3 1 17 1 1" 1/ 1 9 19 3 7 9. T D 1 xø1 1 1 1 79 3 3 3 3 7 1 17 1 1" 1/ 1 9 19 3 3 11. T D 1+1 xø19+xø1 1 13 7 7 9 33 777 91 171 3 1 1" 1/ 1 9 19 3 31 31 1. T D 1+1 xø19+xø1 1 13 7 7 9 33 777 91 171 3 1 1" 1/ 1 9 19 3 31 31. T D 1+1 xø19+xø1 1 13 7 7 9 33 777 91 171 3 1 1" 1/ 1 9 19 3 31 31. T D 1+1 xø19+xø1 1 13 13 7 7 3 91 9 3 1 1" 1/ 1 9 19 3 3. T D 1+1 xø19+xø1 1 13 9 17 37 3 3 3 9 171 3 1 1" 1/ 1 9 19 3 71 331. T Y/D 1+1 xø19+xø1 1 13 9 17 37 3 3 3 9 171 3 1 1" 1/ 1 9 19 3 71 331 7. T Y/D 1+1 xø19+xø1 1 13 9 17 37 3 3 3 9 171 3 1 1" 1/ 1 9 19 3 71 331 9. T Y/D 1+1 xø19+xø1 1 13 39 9 77 171 3 1 1" 1/ 1 9 19 3 77 317 11. T Y/D 1+1 xø19+xø1 1 13 39 9 77 171 3 1 1" 1/ 1 9 19 3 77 317 1 3. T D 1 1 xø1 9 7 9 3 1 3 13 11 " 11 3 91 31 1. T D 1 1 xø1 9 7 9 3 1 3 13 11 " 11 3 91 31 1. T Y/D 1 1 xø1 93 7 1 97 39 979 9 3 13 11 " 11 3 7 3 1 7. T Y/D 1 1 xø1 93 7 1 97 39 979 9 3 13 11 " 11 3 7 3 P7 P P P9 P 9 7 1 P3 3 DN Screw M1 P P9 P P3 3 1 P DN P Screw M1 P9 Min submersibility under S3 1% P3 3 DN 1 Guide rails DN DN P DN Screw M1 DB PUMPS reserves the right to make modifications without notice. 7
- CONTROL PNEL/PUMP SELECTION MTRIX PUMP CODE MX KW P In CONTROL PNEL ED 1 PUMP CONTROL PNEL ED PUMPS CONTROL PNEL ED 3 PUMPS ELECTRONIC CONTROL PNEL PUMPS CONTROL PNEL CONTROL PNEL CONTROL PNEL CONTROL PNEL CONTROL PNEL CONTROL PNEL CODE CODE CODE e.box PLUS e.box PLUS D 11. T D 17 1,3 1,1 1, 3,3 133 ED1,T 13 ED3T 133 E3D,T. T D 171,, 3,, 133 ED,T 13 EDT 11 E3D7,T 3. T D 1739 3,3 3,,,7 133 ED,T 13 EDT 11 E3D7,T. T D 1713,,, 7, 17 EDT 17 EDT 179 E3D1T 11. T D 1713 1,3 1,1 1, 3, 133 ED1,T 13 ED3T 133 E3D,T 1. T D 171 1, 1,, 3, 133 ED1,T 13 ED3T 133 E3D,T. T D 171,, 3,,7 133 ED,T 13 EDT 11 E3D7,T. T D 171,,,, 17 EDT 17 EDT 179 E3D1T. T D 171,,, 7,7 17 EDT 17 EDT 179 E3D1T. T Y/D 171,9,, 11,7 13 ED7,T SD 177 ED1T SD 171 E3D,T SD 7. T Y/D 173,3 7, 1, 13,7 13 ED7,T SD 177 ED1T SD 171 E3D,T SD 9. T Y/D 171 1, 9, 1, 1, 177 ED1T SD 17 ED3T SD 177 E3DT SD 11. T Y/D 179 1,1 11, 1, 1, 177 ED1T SD 17 ED3T SD 177 E3DT SD 1 3. T D 171 3, 3,,, 17 EDT 17 EDT 179 E3D1T 1. T D 1717,,,,9 17 EDT 17 EDT 179 E3D1T 1. T Y/D 171,, 7, 11,3 13 ED7,T SD 177 ED1T SD 171 E3D,T SD 1 7. T Y/D 17,3 7, 1, 1,3 13 ED7,T SD 177 ED1T SD 171 E3D,T SD DB PUMPS reserves the right to make modifications without notice. 77