Specification Non-extensile circuit reakers 200A 0 CN2-T1 Indoor / outdoor Normal rated current 200A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O Cale earth switch 16kA 3 seconds Cale earth switch 21kA 3 seconds O O Transformer earth switch 3.15kA 3 seconds Mechanism Protection & control - circuit reaker CT s dual ratio - 100/50/5A class X CT s ratio - 200/1A class X Overcurrent & earth fault CT operated trip coils Time fuse Link O IDMT overcurrent & earth fault relay - VIP 300 20V-250V shunt trip coil Circuit reaker auxiliary switch 1NO 2NC Mechanical ON/OFF Mechanical EARTH/MAIN Neon indication (6.6-13.8kV) O O Auxiliary switch contacts 1NO 2NC Integral cale test facility Operating handle Transformer earth switch 3.15kA 3 seconds Cale (see availale cale kit accessories) Bottom entry up 300mm 2 1 x 3c Bottom entry up 630mm 2 3 x 1c Key: Standard feature O Optional feature CN2-T6 19
Non-extensile circuit reakers 200A 0 CN2-T1 CN2-T6 Kit no. Cale kits Tee-off cale ox v v RMR-F47 Gland plate 1 x 3C O O RMR-A48 Gland plate 3 x 1C O O RMR-A49 Angled gland plates (RMR) O O RMR-A50 Blank Blank aluminium gland plate O O RMR-A52 Brass wiping gland 1 x 3C O O RMR-A10 Brass wiping gland 3 x 1C O O RMR-A11 Tuular gland 1 x 3C O O RMR-A12 Tuular gland 3 x 1C O O RMR-A13 CES5 gland plate 1 x 3C O O RMR-A132 Installation items Set of padlocks - 6 no O O RMR-A18/6 Anti-vandal fixings, including tool O O RMR-A19 Foundation olts (not required for transformer mounting) O O RMR-A22 Multicore pilot glands O O RMR-A16 Time limit fuses (set of 2 - specify rating as tale page 113) O RMR-A17 Operational items Operating handle RMR-A23 Neon indication (6.6-13.8kV) v v RMR-F108 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O RMR-A81 VAP 6 test unit for VIP 300 O RMR-A202 Mechanical interlocks Key free, earth on v v RMR-F85 Key free, unit off v v RMR-F86 Transformer earth switch, key free, earth on v v RMR-F110 N. B. specify lock symol at time of ordering (3 digits max) not availale with motor mechanisms Order codes 12kV, 16kA, 75kV BIL, 0.35G CN2-T1/16 CN2-T6/16 13.8kV, 21kA, 95kV BIL, 0.8G CN2-T1/21 CN2-T6/21 General arrangement drawing - transformer mounted RMINST-04 Page 70 RMINST-04 Page 70 General arrangement drawing - freestanding RMINST-09 Page 111 RMINST-09 Page 111 Schematic diagram RMSCH-26 Page 100 RMSCH-11 Page 90 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site 20
Non-extensile circuit reaker 200A 0 CN2-T1 DE60250 Transformer protection up to 3.5MVA Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142 Protection CT s - 200/1A class X Setting range: v Overcurrent: 20-200A v Earth fault: 2A-160A Shunt trip coil, 20V DC-250V AC Transformer ratings See tale - page 113 Transformer mounted installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: RMSCH-26 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Tee-off earth switch, 3.15kA 3s Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator CB auxiliary contacts 1NO 2 NC Integral cale test facilities Cale Tee-off cale ox See page 20 for details CN2-T1/16 CN2-T1/21 16kA, 12kV, 75kV BIL 21
Non-extensile circuit reaker 200A 0 CN2-T6 DE60192 Transformer protection up to 1.5MVA Overcurrent and earth fault protection using CT operated trip coils with provision for time fuse links. Protection CT s - 100/50/5A class X Shunt trip coil, 20V DC-250V AC Transformer ratings See tale - page 113 Transformer mounted installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: RMSCH-11 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Transformer earth switch, 3.15kA 3s Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator CB auxiliary contacts 1NO 2 NC Integral cale test facilities Cale Tee-off cale ox See page 20 for details CN2-T6/16 CN2-T6/21 16kA, 12kV, 75kV BIL 22
Specification Non-extensile switch 630A 0 SN6-S1 Indoor / outdoor Normal rated current 630A 13.8kV 21kA 3 seconds 95kV BIL Cale earth switch 21kA 3 seconds Transformer earth switch 3.15kA 3 seconds Mechanism Provision for actuator 24V DC Actuator 24V DC O Mechanical ON/OFF Mechanical EARTH/MAIN Neon indication (6.6-13.8kV) O O Auxiliary switch contacts 1NO 2NC Phase and earth fault detection CT s for Easergy 200E O Provision for EFPI O O Integral cale test facility Operating handle Transformer earth switch 3.15kA 3 seconds Cale (see availale cale kit accessories) Bottom entry up 300mm 2 1 x 3c Bottom entry up 630mm 2 3 x 1c Key: Standard feature O Optional feature SN6-S2 23
Non-extensile switch 630A 0 SN6-S1 SN6-S2 Kit no. Cale kits Tee-off cale ox v v RMR-F47 Gland plate 1 x 3C O O RMR-A48 Gland plate 3 x 1C O O RMR-A49 Angled gland plates (RMR) O O RMR-A50 Blank aluminium gland plate O O RMR-A52 Brass wiping gland 1 x 3C O O RMR-A10 Brass wiping gland 3 x 1C O O RMR-A11 Tuular gland 1 x 3C O O RMR-A12 Tuular gland 3 x 1C O O RMR-A13 CES5 gland plate 1 x 3C O O RMR-A132 Installation items Set of padlocks - 6 no O O RMR-A18/6 Anti-vandal fixings, including tool O O RMR-A19 Foundation olts (not required for transformer mounting) O O RMR-A22 Multicore pilot glands O O RMR-A16 Operational items Operating handle RMR-A23 Neon indication (6.6-13.8kV) v v RMR-F108 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O RMR-A81 Actuator 24V DC v RMR-F67 Mechanical interlocks Key free, earth on v RMR-F85 Key free, unit off v RMR-F86 Transformer earth switch, key free, earth on v v RMR-F110 N. B. specify lock symol at time of ordering (3 digits max) not availale with motor mechanisms Order codes 13.8kV, 21kA, 95kV BIL, 0.8G SN6-S1/21 SN6-S2/21 General arrangement drawing - transformer mounted RMINST-04 Page 69 RMINST-04 Page 69 General arrangement drawing - freestanding RMINST-09 Page 111 RMINST-09 Page 111 Schematic diagram N/A RMSCH-28 Page 101 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site 24
Non-extensile switch 630A 0 SN6-S1 DE60193 Switch disconnector Non-automatic Installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Transformer earth switch, 3.15kA 3s Cale earth switch, 21kA 3s Integral cale test facilities Cale Tee-off cale ox Neon indication See page 24 for details SN6-S1/21 25
Non-extensile switch 630A 0 SN6-S2 DE60194 Switch disconnector Non-automatic Installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: RMSCH-28 Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Provision for actuator, 24V DC Transformer earth switch, 3.15kA 3s Cale earth switch, 21kA 3s Auxiliary contacts 1NO 2NC Earth selected auxiliary contact 1NO Integral cale test facilities Cale Tee-off cale ox Actuator, 24V DC Neon indication See page 24 for details SN6-S2/21 26
Specification Non-extensile metering unit 200A 0 MU2-M1 MU2-M2 MU2-M3 Indoor / outdoor Normal rated current 200A 12kV 16kA 1 second 75kV BIL Metering* CT s -50/25/5A 0.5s 7.5VA CT s -100/50/5A 0.5s 10VA CT s -200/100/5A 0.5s 10VA VT s -11kV/110V 0.5 50VA *CT s - 2 phases (R & B), VT s phase to phase. 6.6kV VT s are availale - contact Merlin Gerin Cale (see availale cale kit accessories) Bottom entry up 300mm 2 1 x 3c O O O Bottom entry up 630mm 2 3 x 1c O O O Key: Standard feature O Optional feature 27
Non-extensile metering unit 200A 0 MU2-M1 MU2-M2 MU2-M3 Kit no. Cale kits Tee-off cale ox v v v RMR-F47 Gland plate 1 x 3C O O O RMR-A48 Gland plate 3 x 1C O O O RMR-A49 Angled gland plates (RMU) O O O RMR-A51 Blank Blank aluminium gland plate O O O RMR-A52 Brass wiping gland 1 x 3C O O O RMR-A10 Brass wiping gland 3 x 1C O O O RMR-A11 Tuular gland 1 x 3C O O O RMR-A12 Tuular gland 3 x 1C O O O RMR-A13 CES5 gland plate 1 x 3C O O O RMR-A132 Installation items Set of padlocks - XX no O O O RMR-A18/6 Foundation olts (not required for transformer mounting) O O O RMR-A22 Multicore pilot glands O O O RMR-A16 RMU - MU2 installation kit O O O RMR-A350 Freestanding installation kit O O O RMR-A90 Order codes 12kV, 16kA, 75kV BIL, 0.35G MU2-M1/16 MU2-M2/16 MU2-M3/16 General arrangement drawing - transformer mounted RMINST-07/08 Page 72-73 RMINST-07/08 Page 72-73 RMINST-07/08 Page 72-73 Schematic diagram RMSCH-14 Page 90 RMSCH-14 Page 90 RMSCH-14 Page 90 Key: v Factory fitted accessory O Loose accessory, assemled on site 28
Non-extensile metering unit 200A 0 MU2-M1 DE60210 Non-extensile metering unit N/A Metering transformers Metering CT s R & B phases v 50/25/5A v 7.5VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-07/08 Schematic drawing ref: RMSCH-14 Short time withstand 16kA 1s Normal current rating 200A Normal rated voltage 12kV Normal rated BIL 75kV Direct coupling etween RMU and transformer (optional freestanding cale connection) Cale connection Cale ox Installation kits See page 28 for details MU2-M1/16 16kA, 12kV, 75kV BIL 29
Non-extensile metering unit 200A 0 MU2-M2 DE60210 Non-extensile metering unit N/A Metering transformers Metering CT s R & B phases v 100/50/5A v 10VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-07/08 Schematic drawing ref: RMSCH-14 Short time withstand 16kA 1s Normal current rating 200A Normal rated voltage 12kV Normal rated BIL 75kV Direct coupling etween RMU and transformer (optional freestanding cale connection) Cale connection Cale ox Installation kits See page 28 for details MU2-M2/16 16kA, 12kV, 75kV BIL 30
Non-extensile metering unit 200A 0 MU2-M3 DE60210 Non-extensile metering unit N/A Metering transformers Metering CT s R & B phases v 200/100/5A v 10VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-07/08 Schematic drawing ref: RMSCH-14 Short time withstand 16kA 1s Normal current rating 200A Normal rated voltage 12kV Normal rated BIL 75kV Direct coupling etween RMU and transformer (optional freestanding cale connection) Cale connection Cale ox Installation kits See page 28 for details MU2-M3/16 16kA, 12kV, 75kV BIL 31
Specification Extensile circuit reakers 200A 0 T2 T3 Indoor / outdoor Busars 630A Circuit reaker normal rated current 200A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O O O O O O O O O O O Cale earth switch 16kA 3 seconds Cale earth switch 21kA 3 seconds O O O O O O O O O O O O Mechanism Provision for actuator 24V DC Actuator 24V DC O O O O Operating handle Protection system CT s dual ratio - 500/200/1A class x Overcurrent relay - VIP 30 CT s dual ratio - 100/50/5A class X CT ratio - 200/1A class X Overcurrent & earth fault CT operated trip coils Overcurrent & earth fault relay VIP 35 Time fuse link O IDMT overcurrent & earth fault relay - VIP 300 20V-250V shunt trip coil Auxiliary switch 1NO 2NC Metering CT s -200/100/5A 0.5s 10VA VT s -13.8kV/110V 0.5 10VA 13.8/110V/110v 0.5 50VA 3P 20VA VT s -11kV/110V 0.5 50VA VT s -6.6kV/110V 0.5 50VA VT s phase - phase, CT s R & B VT s phase - earth, CT s RYB Mechanical ON/OFF Mechanical EARTH/MAIN Cale neon indication (6.6-13.8KV) O O O O O O O O O O O O Auxiliary switch contacts 1NO 2NC Earth selected auxiliary contacts 1NO Integral cale test facility Cale Top entry cales O O O O O O O O O O O O Key: Standard feature O Optional feature T7 T11 T12 T13 T14 T15 T16 T19 T20 T21 32
Extensile circuit reakers 200A 0 T2 T3 T7 T11 T12 Cale kits Gland plate 1 x 3C O O O O O O O O O O O O RMR-A48 Gland plate 3 x 1C O O O O O O O O O O O O RMR-A49 Angled gland plates (RMR) O O O O O O O O O O O O RMR-A50 Blank aluminium gland plate O O O O O O O O O O O O RMR-A52 Brass wiping gland 1 x 3C O O O O O O O O O O O O RMR-A10 Brass wiping gland 3 x 1C O O O O O O O O O O O O RMR-A11 Tuular gland 1 x 3C O O O O O O O O O O O O RMR-A12 Tuular gland 3 x 1C O O O O O O O O O O O O RMR-A13 CES5 gland plate 1 x 3C O O O O O O O O O O O O RMR-A132 Top entry cales standard v v v v v RMR-F93 panels Top entry cales MU6 only v v v v v v v RMR-F94 Installation items 3 phase usars 630A O O O O O RMR-A14 3 phase usars 630A O O O O O O O RMR-A78 Busar end kit O O O O O O O O O O O O RMR-A15 Set of padlocks - 6 no O O O O O O O O O O O O RMR-A18/6 Foundation olts (not required RMR-A22 for transformer mounting) Multicore pilot glands O O O O O O O O O O O O RMR-A16 Time limit fuses (set of 2 - specify O RMR-A17 rating as tale page 113) Operational items Operating handle RMR-A23 Cale neon indication v v v v v v v v v v v v RMR-F108 (6.6-13.8kV) Neon lamp test unit v v v v v v v v v v v v RMR-A24 (including lamp) Neon lamp O O O O O O O O O O O RMR-A81 VAP 6 test unit for VIP 300 O O O O O O O O O O O RMR-A202 Actuator 24V DC v v v RMR-F67 Polarity conversion kit** v v v RMR-F391 Mechanical interlocks Key free, EARTH ON v v v v v v RMR-F85 Key free, MAIN OFF v v v v v v RMR-F86 N. B. specify lock symol at time of ordering (3 digits max) not availale with motor mechanisms Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. T13 T14 T15 T16 T19 T20 T21 Kit no. 33
Extensile circuit reakers 200A 0 T2 T3 T7 T11 T12 Earth fault passage indication (choose provision kit and an EFPI required if not using Easergy 200E) EFPI provision kit, inside O O O O O O O O O O O O RMR-F30 cale ox Bowden STD EFPI type NB O O O O O O O O O O O O RMR-A277 Bowden LV reset EFPI type NB1 O O O O O O O O O O O O RMR-A278 Bowden LV reset & alarm O O O O O O O O O O O O RMR-A279 type NB2 Bowden RR EFPI and CT O O O O O O O O O O O O RMR-A56 Fundamentals ER FIND O O O O O O O O O O O O RMR-A57 EFPI and CT Ancillary items Tool ox O O O O O O O O O O O O RMR-A80 Order code 12kV, 16kA, 75kV BIL, 0.35G 13.8kV, 21kA, 95kV BIL, 0.8G General arrangement drawing Schematic drawing T2/16 T2/21 RMINST-03 Page 68 RMSCH-07 Page 86 T3/16 T3/21 RMSCH-09 Page 88 T7/16 T7/21 RMINST-03 Page 68 RMSCH-06 Page 85 T11/16 T11/21 RMSCH-09 Page 88 T12/16 T12/21 RMINST-03 Page 68 RMSCH-19 Page 94 T13 T13/16 T13/21 RMSCH-20 Page 95 T14 T14/16 T14/21 RMSCH-20 Page 95 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. T15 T15/16 T15/21 RMINST-03 Page 68 RMSCH-07 Page 86 T16 T16/16 T16/21 RMINST-03 Page 68 RMSCH-07 Page 86 T19 N/A T19/21 RMSCH-35 Page 103 T20 T20/16 N/A RMSCH-35 Page 103 T21 N/A T21/21 RMSCH-36 Page 104 Kit no. 34
Extensile circuit reaker 200A 0 T2 DE60251 Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 20-200A v Earth fault: 2-160A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-07 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facilities Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T2/16 T2/21 16kA, 12kV, 75kV BIL 35
Extensile circuit reaker 200A 0 T7 DE60196 Transformer protection up to 1.5MVA at 11kV Overcurrent and earth fault protection using CT operated trip coils with provision for time fuse links. Protection CT s - 100/50/5A class X Shunt trip coil, 20V DC-250V AC Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-06 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facility Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T7/16 T7/21 16kA, 12kV, 75kV BIL 36
Extensile circuit reaker 200A 0 T* DE60252 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 20-200A v Earth fault: 2-160A Metering transformers Metering CT s R & B phases v 200/100/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facility Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase T3/16 T3/21 T11/16 T11/21 N/A T19/21 Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram RMSCH-09 Page 88 RMSCH-09 Page 88 RMSCH-35 Page 103 T20/16 N/A RMSCH-35 Page 103 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)113 290 3500 37
Extensile circuit reaker 200A 0 T12 DE60253 M Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 20-200A v Earth fault: 2-160A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-19 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contact1no Integral cale test facility Cale Actuator, 24V DC Neon indication Operating handle Busar kit Top entry cales See page 33 for details T12/16 T12/21 16kA, 12kV, 75kV BIL 38
Extensile circuit reaker 200A 0 T* DE60254 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 20-200A v Earth fault: 2-160A Metering transformers Metering CT s v 200/100/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator Auxiliary contacts,1no 2NC Earth selected auxiliary contact1no Integral cale test facility Cale Actuator, 24V DC Neon indication Operating handle Busar kit Top entry cales See page 33 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram T14/16 T14/21 RMSCH-20 Page 95 N/A T21/21 RMSCH-36 Page 104 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)113 290 3500 39
Extensile circuit reaker 200A 0 T13 DE60254 Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 20-200A v Earth fault: 2-160A Metering transformers Metering CT s v 200/100/5A v 10VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: Schematic drawing ref: RMSCH-20 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator Auxiliary contacts,1no 2NC Earth selected auxiliary contact1no Integral cale test facility Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T13/16 T13/21 16kA, 12kV, 75kV BIL 40
Extensile circuit reaker 200A 0 T15 DE60251 Feeder protection up to 2.5MVA at 11kV Self powered overcurrent relay, VIP 30. Protection CT s - 500/200/1A class X Setting range: 500/1A v Overcurrent: 20-200A Setting range: 200/1A v Overcurrent: 8-80A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-12 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facilities Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T15/16 T15/21 16kA, 12kV, 75kV BIL 41
Extensile circuit reaker 200A 0 T16 DE60255 Feeder protection up to 2.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 35. Protection CT s - 500/200/1A class X CH30 core alance CT Setting range: 500/1A v Overcurrent: 20-200A v Earth fault: 25-300A Setting range: 200/1A v Overcurrent: 8-80A v Earth fault: 10-120A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-13 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facilities Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T16/16 T16/21 16kA, 12kV, 75kV BIL 42
Specification Extensile circuit reakers 630A 0 T4 T5 Indoor / outdoor Busars 630A Circuit reaker normal rated current 630A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O O O O O O O O Cale earth switch 16kA 3 seconds Cale earth switch 21kA 3 seconds O O O O O O O O O Mechanism Provision for actuator 24V DC Actuator 24V DC O O O O Operating handle Protection system CT ratio - 800/1A class X IDMT overcurrent & earth fault relay - VIP 300 20V-250V shunt trip coil Auxiliary switch 1NO 2NC Metering CT s - 400/200/5A 0.5s 10VA VT s - 13.8kV/110V/110V/ 0.5 50VA 3P 20VA VT s - 11V/110V 0.5 50VA VT s - 6.6kV/110V 0.5 50VA VT s - phase - phase, CT s R & B VT s phase - earth, CT s RYB Mechanical ON/OFF Mechanical EARTH/MAIN Cale neon indication (6.6-13.8KV) O O O O O O O O O Auxiliary switch contacts 1NO 2NC CT 600/5A 5VA CLS 1 Yph Ammeter 0-600A Earth selected auxiliary contacts 1NO Integral cale test facility Cale Top entry cales O O O O O O O O O Key: Standard feature O Optional feature T6 T8 T9 T10 T22 T23 T24 43
Extensile circuit reakers 630A 0 T4 T5 T6 T8 T9 T10 T22 T23 T24 Kit no. Cale kits Gland plate 1 x 3C O O O O O O O O O RMR-A48 Gland plate 3 x 1C O O O O O O O O O RMR-A49 Angled gland plates (RMR) O O O O O O O O O RMR-A50 Blank aluminium gland plate O O O O O O O O O RMR-A52 Brass wiping gland 1 x 3C O O O O O O O O O RMR-A10 Brass wiping gland 3 x 1C O O O O O O O O O RMR-A11 Tuular gland 1 x 3C O O O O O O O O O RMR-A12 Tuular gland 3 x 1C O O O O O O O O O RMR-A13 CES5 gland plate 1 x 3C O O O O O O O O O RMR-A132 Top entry cales standard panels v v RMR-F93 Top entry cales MU6 only v v v v v v v RMR-F94 Installation items 3 phase usars 630A O O RMR-A14 3 phase usars 630A O O O O O O O RMR-A78 Busar end kit O O O O O O O O O RMR-A15 Set of padlocks - 6 no O O O O O O O O O RMR-A18/6 Foundation olts (not required for RMR-A22 transformer mounting) Multicore pilot glands O O O O O O O O O RMR-A16 Operational items Operating handle RMR-A23 Cale neon indication (6.6-13.8kV) v v v v v v v v v RMR-A108 Neon lamp test unit (including lamp) O O O O O O O O O RMR-A24 Neon lamp O O O O O O O O O RMR-A81 VAP 6 test unit for VIP 300 O O O O O O O O RMR-A202 Actuator 24V DC v v v v RMR-F67 Polarity conversion kit** v v v v RMR-F391 Mechanical interlocks Key free, EARTH ON v v v v v RMR-F85 Key free, MAIN OFF v v v v v RMR-F86 N. B. specify lock symol at time of ordering ( 3 digits max) not availale with motor mechanisms Earth fault passage indication (choose provision kit and an EFPI required if not using Easergy T200E) EFPI provision kit, inside cale ox O O O O O O O O O RMR-F30 Bowden STD EFPI type NB O O O O O O O O O RMR-A277 Bowden LV reset EFPI type NB1 O O O O O O O O O RMR-A278 Bowden LV reset & alarm type NB2 O O O O O O O O O RMR-A279 Bowden RR EFPI and CT O O O O O O O O O RMR-A56 Fundamentals ER FIND EFPI and CT O O O O O O O O O RMR-A57 Ancillary items Tool ox O O O O O O O O O RMR-A80 Order code 12kV, 16kA, 75kV BIL, 0.35G 13.8kV, 21kA, 95kV BIL, 0.8G General arrangement drawing Schematic drawing T4/16 T4/21 RMINST-03 Page 68 RMSCH-08 Page 87 T5/16 T5/21 RMSCH-10 Page 89 T6/16 T6/21 RMSCH-10 Page 89 T8/16 T8/21 RMINST-03 Page 68 RMSCH-23 Page 98 T9/16 T9/21 RMSCH-24 Page 99 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. T10/16 T10/21 RMSCH-24 Page 99 N/A N/A T24/16 T22/21 RMSCH-37 Page 105 T12321 RMSCH-38 Page 106 N/A RMSCH-37 Page 105 44
Extensile circuit reaker 630A 0 T4 DE60256 Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 80-800A v Earth fault: 8-640A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-08 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Ammeter 0-600A CT Y ph - 600/5A class 1.0, 5VA Integral cale test facility Cale Neon indication Busar kit Top entry cales See page 44 for details T4/16 T4/21 16kA, 12kV, 75kV BIL 45
Extensile circuit reaker 630A 0 T* DE60197 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 80-800A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Ammeter 0-600A CT Y ph - 600/5A class 1.0, 5VA Integral cale test facility Cale Actuator, 24V DC Neon indication Busar kit Top entry cales See page 44 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase T5/16 T5/21 T6/16 T6/21 N/A T22/21 Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram RMSCH-10 Page 89 RMSCH-10 Page 89 RMSCH-37 Page 105 T24/16 N/A RMSCH-37 Page 105 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)113 290 3500 46
Extensile circuit reaker 630A 0 T8 DE60257 Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 80-800A v Earth fault: 8-640A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-23 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contact1no Ammeter 0-600A CT Y ph - 600/5A class 1.0, 5VA Integral cale test facility Cale Actuator, 24V DC Neon indication Busar kit Top entry cales See page 44 for details T8/16 T8/21 16kA, 12kV, 75kV BIL 47
Extensile circuit reaker 630A 0 T* DE60199 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 80-800A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contacts Ammeter 0-600A CT Y ph- 600/5A class 1.0, 5VA Integral cale test facility Cale Neon indication Busar kit Top entry cales See page 44 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram T9/16 T9/21 RMSCH-24 Page 99 T10/16 T10/21 RMSCH-24 Page 99 N/A T23/21 RMSCH-38 Page 106 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)113 290 3500 48
Specification Extensile switches 630A 0 SE6-S1 SE6-S2 SE6-E1 Indoor / outdoor Busars 630A Switch normal rated current 630A 13.8kV 21kA 3 seconds 95kV BIL Cale earth switch 21kA 3 seconds Mechanism Provision for actuator 24V DC Actuator 24V DC O Operating handle Mechanical ON/OFF Mechanical EARTH/MAIN Cale neon indication (6.6-13.8kV) v v Busar neon indication (6.6-13.8kV) v v Auxiliary switch contacts1no 1 NC v Phase and earth fault detection CT s for Easergy T200E O EFPI provision only CT inside ox O O Integral cale test facility Integral test facility RH/LH usar earthing Cale (see availale cale kit accessories) Top entry cales O O Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site 49
Extensile switches 630A 0 SE6-S1 SE6-S2 SE6-E1 Kit no. Cale kits Gland plate 1 x 3C O O RMR-A48 Gland plate 3 x 1C O O RMR-A49 Angled gland plates (RMR) O O RMR-A50 Blank aluminium gland plate O O RMR-A52 Brass wiping gland 1 x 3C O O RMR-A10 Brass wiping gland 3 x 1C O O RMR-A11 Tuular gland 1 x 3C O O RMR-A12 Tuular gland 3 x 1C O O RMR-A13 CES5 gland plate 1 x 3C O O RMR-A132 Top entry cales v v RMR-F93 Installation items 3 phase usars 630A O O v RMR-A14 Set of padlocks - 6 no O O O RMR-A18/6 Busar end kit (1 end kit required per switchoard) O O O RMR-A15 Foundation olts (not required for transformer mounting) RMR-A22 Multicore pilot glands O RMR-A16 Operational items Operating handle RMR-A23 Cale neon indication (6.6-13.8kV) v v RMR-F108 Cale and usar neon indication (6.6-13.8kV) v v RMR-F92 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O RMR-A81 Actuator 24V DC v RMR-F67 Polarity conversion kit* v RMR-F391 Mechanical interlocks Key free, earth ON v v RMR-F85 Key free, main OFF v RMR-F86 N. B. specify lock symol at time of ordering ( 3 digits max) not availale with motor mechanisms EFPI provision kit, inside cale ox O O RMR-F30 Bowden STD EFPI NB O O RMR-A277 Bowden LV reset EFPI type NB1 O O RMR-A278 Bowden LV reset & alarm type NB2 O O RMR-A279 Bowden RR EFPI and CT O O RMR-A56 Fundamentals ER FIND EFPI and CT O O RMR-A57 Ancillary items Tool ox O O O RMR-A80 Order code 13.8kV, 21kA, 95kV BIL, 0.8G SE6-S1/21 SE6-S2/21 SE6-E1/21 General arrangement drawing RMINST-03 Page 68 RMINST-03 Page 68 Schematic drawing N/A RMSCH-29 Page 102 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. RMINST-03 Page 68 N/A 50
Extensile switch 630A 0 SE6-S1 DE60201 Switch disconnector Non-automatic Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Cale earth switch, 21kA 3s s Integral cale test facility Cale Neon indication Busar kit Top entry cales See page 50 for details SE6-S1/21 51
Extensile switch 630A 0 SE6-S2 DE60202 Switch disconnector Non-automatic Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-29 Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Provision for actuator, 24V DC Cale earth switch, 21kA 3s Auxiliary contacts,1no 2NC Earth selected auxiliary contact 1NO Integral cale test facility Cale Actuator, 24V DC Neon indication Busar kit Top entry cales See page 50 for details SE6-S2/21 52
Extensile usar earthing switch 630A 0 SE6-E1 DE60203 Busar earthing switch Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Cale earth switch, 21kA 3s N/A Cale N/A Busar kit See page 50 for details SE6-E1/21 53
Specification Extensile us-section 630A 0 SE6-B1 B3 B5 Indoor / outdoor Busars 630A Circuit reaker normal rated current 630A Switch normal rated current 630A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O RH usar earth switch 16kA 3 seconds RH usar earth switch 21kA 3 seconds O O Mechanism Provision for actuator 24V DC Actuator 24V DC O Operating handle Protection system CT ratio - 800/1A class X IDMT overcurrent & earth fault relay - VIP 300 20V - 250V shunt trip coil Auxiliary switch1no 2 NC Metering CT s - 400/200/5A 0.5s 10VA VT s - 11kA/110V 0.5 50VA VT s phase - phase, CT s R & B Mechanical ON/OFF Mechanical EARTH/MAIN Earth selected auxiliary contact1no RH usar neon indication O O O Auxiliary switch contacts1no 2NC CT 600/5A 5VA CLS 1 Y phase Ammeter 0-600A Integral test facility RH usar earthing LH usar earthing ( using SE6-E1) O O O Key: Standard feature O Optional feature 54
Extensile us section 630A 0 SE6-B1 B3 B5 Kit no. Installation items 3 phase usars 630A RMR-A14 3 phase usars 630A (Joggle metering) v v v RMR-A79 3 phase usars 630A doule width (metering) v v v RMR-A78 Set of padlocks - XX no O O O RMR-A18/6 Busar end kit (1 end kit required per switchoard) O O O RMR-A15 Foundation olts (not required for transformer mounting) RMR-A22 Multicore pilot glands O O RMR-A16 Operational items Operating handle RMR-A23 LH and RH usar neon indication v v v RMR-F92 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O O RMR-A81 VAP6 test unit for VIP 300 O O RMR-A202 Actuator 24V DC v RMR-F67 Polarity conversion kit* v RMR-F391 Mechanical interlocks Key free, earth ON v v RMR-F85 Key free, main OFF v v RMR-F86 N. B. specify lock symol at time of ordering ( 3 digits max) not availale with motor mechanisms Ancillary items Tool ox O O O RMR-A80 Order code 12kV, 16kA, 75BIL, 0.35G N/A B3/16 B5/16 13.8kV, 21kA, 95kV BIL, 0.8G SE6-B1/21 B3/21 B5/21 General arrangement drawing RMINST-01 Page 66 RMINST-01 Page 66 Schematic drawing N/A RMSCH-21 Page 91 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. RMINST-01 Page 66 RMSCH-22 Page 97 55
Extensile us-section 630A 0 SE6-B1 DE60204 Bus-section disconnector Protection & control Non-automatic Installation drawing ref: RMINST-01 Schematic drawing ref: N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV RH usar earth switch, 21kA 3s Integral RH usar test facility Cale N/A Neon indication Busars See page 55 for details SE6-B1/21 56
Extensile us-section 630A 0 B3 DE60258 Bus-section circuit reaker Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 80-800A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT ph-ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-01 Schematic drawing ref: RMSCH-21 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 75/95kV RH usar earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Ammeter 0-600A CT Y ph- 600/5A class 1.0 5VA Integral RH usar test facility Cale N/A Neon indication Busars See page 55 for details B3/16 B3/21 16kA, 12kV, 75kV BIL 57
Extensile us-section 630A 0 B5 DE60259 Bus-section circuit reaker Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC 60255 and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: 80-800A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT ph-ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-01 Schematic drawing ref: RMSCH-22 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC RH usar earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contacts1no Ammeter 0-600A CT Y ph- 600/5A class 1.0 5VA Integral RH usar test facility Cale N/A Actuator, 24V DC Neon indication Busars See page 55 for details B5/16 B5/21 16kA, 12kV, 75kV BIL 58