Tubing, Fittings and ir Handling System omponents
INDEX Laying Out a Tubing System 3 Tubing ssembly 3 Typical Layout for entral Vacuum leaning Systems 4 Tubing 5 Elbows 6 Long Radius ends 7 45 YLs 8-9 90 TYs 10-11 Double Fittings 12 ouplings 13 dapters 14-15 Miscellaneous 16 Quick lamp ouplings & aps 17 ompression ouplings 17 Rubber Sleeves and lamps 18 Shrink Sleeves 19 Weather aps 19 Hoses 20-21 Wall Inlet Valves for 1-1/2" Diameter Hose 22 Floor Inlet Valves for 1-1/2" Diameter Hose 23 Locking Inlet Valves 23 Inlet Valves for 2" Diameter Hose or Larger 23 ir Gate Valves 24 last Gates 25 Wafer utterfly Valves 26 Flange dapters 26-27 ompanion Flanges 28 heck Valves 29 Friction Loss hart 30 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS s an air and gas handling specialist, Spencer offers a wide range of stock light gauge metallic tubing and the companion fittings that make it easy to lay out and implement an entire network for central vacuum cleaning, pneumatic conveying, low pressure air handling and material handling systems. More economical than steel pipe and pipe fittings, more durable than PV or other plastic tubing and without worries about static electricity buildup, our metallic tubing products are lightweight and strong. They are made in carbon steel, galvanized steel, stainless steel and aluminum, in diameters from 2-1/8" to 14". ontact Spencer for availability of special tubing and fittings diameters and material gauges. Standard fittings include elbows, YL and TY branches, couplings, reducers and adapters, which are supplemented by a complete line of accessories flanges, rubber sleeves, vacuum hoses, check valves, air gates, butterfly valves, etc. Special fittings can be fabricated of various metals for custom-designed ease of connection or installation. Some ideas: 180 returns, manifolds, double threaded Ys, tube to pipe adapters, hose adapters, flanged adapters. Vacuum system inlet valves are available for floor or wall installation. Some options include, recessed, flush-type valves; valves with locking features; slotted floor valves that can vacuum dirt from dry mops and push-brooms; silent valves for hospitals, libraries and schools; oversized valves for large diameter vacuum hoses. Special fabrication services are available in aluminum, stainless steel, galvanized steel and carbon steel plain or primed. Starting with economical standard Spencer fittings, we can fabricate machine manifolds, welded configurations, assemblies, prefabricated ductwork and various types of air distribution devices. Using Spencer components is a smart way to save jobsite time. Layout and design services are available from Spencer to help you develop an integrated tubing and fittings network for your central vacuum cleaning, pneumatic conveying or low-pressure air and process material handling system applications. ORDER INSTRUTIONS To provide you with the best service and to avoid possible errors please include the following on all orders. n orrect billing and shipping address with shipping method. n Material of construction - arbon Steel, Galvanized Steel, Stainless Steel, or luminum. n Quantity Part Number Description n Tubing Length - specify if other than standard. n Type of ends on fittings - straight or expanded. n Required shipping date. n onfirming order - if confirms a previous telephone, email or fax order, please mark onfirming Order - Do Not Duplicate." 2 The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
LYING OUT TUING SYSTEM efore laying out a tubing system a review of the building should be performed. This will bring out any structural peculiarities the building may have. Sizing of the tubing should be made to assure a velocity that will allow materials to flow freely without dropout" or high abrasion. The friction loss chart (on page 30) can help with sizing problems. Generally the use of good plumbing practices will give satisfactory results. Remember that a smooth and continuous flow of air throughout the system is the chief goal. Tubing should be arranged so that there are no connections into which heavier material will drop by gravity or which can cause line obstructions. TUING SSEMLY Time spent in preparing the tubing and fittings for assembly will save time in installation and possible problems later. ll burrs should be removed and ends where joints are to be made should be cleaned of oil, grease, dust, etc. Tubing may be joined by adhesive, heat shrinkable sleeves, welding, brazing or compression couplings. (Note: dhesive is not recommended for lines over 6" ). Heat shrinkable sleeves are the most popular method for joining Spencer tubing and fittings. The tubing is slipped into the expanded end of the fitting and heat sealed. slip coupling is used to join two sections of tubing. Short runs can be assembled on the floor and then raised into position. Horizontal runs should be supported every 8-10 feet under normal conditions. Risers and drops should be supported to prevent movement which can cause deterioration of the joints. Regardless of the sealing method used, tubing systems should be tested for leaks prior to enclosing them in walls or other structures where it would be difficult to make an effective repair. Testing should be done under vacuum. orrect Fitting Use long turn 90 TY" fitting Incorrect Fitting Do not use steam or water fittings Preferred onnection where two horizontal mains join DIRETION OF FLOW DIRETION OF FLOW DIRETION OF FLOW DIRETION OF FLOW DIRETION OF FLOW DIRETION OF FLOW TUING MUST UTT FIRMLY GINST THE SHOULDERS OF THE FITTING LOG USED Y PROJETING SHOULDERS IN STEM OR WTER FITTINGS The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com 3
4 The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
TUING Standard Length at. No. () Steel luminum/ss Gauge 20T20 2-1/8" 20 ft. 20 ft. 16 25T20 2-1/2" 20 ft. 20 ft. 16 30T20 3" 20 ft. 20 ft. 16 35T20 3-1/2" 20 ft. 20 ft. 16 40T20 4" 20 ft. 20 ft. 16 50T20 5" 20 ft. 20 ft. 14 60T20 6" 20 ft. 20 ft. 14 80T20 8" 20 ft. 20 ft. 14 10T20 10" 20 ft. 20 ft. 12 12T20 12" 20 ft. 20 ft. 12 14T20 14" 20 ft. 8 ft. / 20 ft. 12 ontact Spencer for availability of 1-1/2" tubing. ontact Spencer for availability of #11 gauge tubing. Standard stock tubing (unless noted) is 20 ft. lengths, but will cut to your specifications. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com 5
ELOWS 45 R 45 Standard Radius Elbow R 90 90 Standard Radius Elbow 45 R 45 Short Radius Elbow at. No. () (ID) R Gauge 20L45 2-1/8" 4-1/16" 2-1/8" 1-3/8" 5" 16 25L45 2-1/2" 4-1/2" 2-1/2" 1-3/8" 6" 16 30L45 3" 5-1/8" 3" 1-3/8" 7-1/2" 16 35L45 3-1/2" 5-5/8" 3-1/2" 1-3/8" 8-3/4" 16 40L45 4" 6-1/8" 4" 1-3/8" 10" 16 50L45 5" 7-13/16" 5" 1-5/8" 12-1/2" 14 60L45 6" 9-7/16" 6" 1-5/8" 15" 14 80L45 8" 12-9/16" 20" 14 *10L45 10" 28-1/4" 32" 12 **12L45 12" 21-5/32" 36" 12 **14L45 14" 22-5/32" 36" 12 at. No. () (ID) R Gauge 20L90 2-1/8" 7" 2-1/8" 1-3/8" 5" 16 25L90 2-1/2" 8" 2-1/2" 1-3/8" 6" 16 30L90 3" 9-1/2" 3" 1-3/8" 7-1/2" 16 35L90 3-1/2" 10-3/4" 3-1/2" 1-3/8" 8-3/4" 16 40L90 4" 12" 4" 1-3/8" 10" 16 50L90 5" 15-1/8" 5" 1-5/8" 12-1/2" 14 60L90 6" 18-1/4" 6" 1-5/8" 15" 14 80L90 8" 24-1/4" 20" 14 *10L90 10" 47" 32" 12 **12L90 12" 42-1/4" 36" 12 **14L90 14" 43-1/4" 36" 12 *Stainless Steel is segmented. **Segmented - 90 degree = 5 pieces; 45 degree = 3 pieces. at. No. () (ID) R Gauge 20SRL45 2-1/8" 3-7/16" 2-1/8" 1-3/8" 3-1/2" 16 25SRL45 2-1/2" 3-21/32" 2-1/2" 1-3/8" 4" 16 30SRL45 3" 3-7/8" 3" 1-3/8" 4-1/2" 16 35SRL45 3-1/2" 4-1/16" 3-1/2" 1-3/8" 5" 16 40SRL45 4" 4-1/2" 4" 1-3/8" 6" 16 50SRL45 5" 5-23/32" 5" 1-5/8" 7-1/2" 14 60SRL45 6" 6-31/32" 6" 1-5/8" 9" 14 80SRL45 8" 9-7/32" 12" 14 R 90 90 Short Radius Elbow at. No. () (ID) R Gauge 20SRL90 2-1/8" 5-1/2" 2-1/8" 1-3/8" 3-1/2" 16 25SRL90 2-1/2" 6" 2-1/2" 1-3/8" 4" 16 30SRL90 3" 6-1/2" 3" 1-3/8" 4-1/2" 16 35SRL90 3-1/2" 7" 3-1/2" 1-3/8" 5" 16 40SRL90 4" 8" 4" 1-3/8" 6" 16 50SRL90 5" 10-1/8" 5" 1-5/8" 7-1/2" 14 60SRL90 6" 12-1/4" 6" 1-5/8" 9" 14 80SRL90 8" 16-1/4" 12" 14 8" and larger sizes - straight ends only. ontact Spencer for availability of #11 gauge items - straight ends only. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 6 The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
LONG RDIUS ENDS 45 Long Radius end 90 Long Radius end R 45 R 90 = Tangent Length = Tangent Length 45 on 24" enter Line at. No. () R Gauge 20P45 2-1/8" 6 15-15/16" 24" 16 25P45 2-1/2" 6 15-15/16" 24" 16 30P45 3" 6 15-15/16" 24" 16 40P45 4" 8 17-15/16" 24" 16 45 on 30" enter Line at. No. () R Gauge 32U45 3" 6 18-7/16" 30" 16 35U45 3-1/2" 7 19-7/16" 30" 16 42U45 4" 8 20-7/16" 30" 16 52U45 5" 10 22-7/16" 30" 14 62U45 6" 12 24-7/16" 30" 14 82U45 8" 16 25-1/4" 32" 14 45 on 36" enter Line at. No. () R Gauge 23J45 2-1/8" 6 20-15/16" 36" 16 25J45 2-1/2" 6 20-15/16" 36" 16 30J45 3" 6 20-15/16" 36" 16 35J45 3-1/2" 7 21-15/16" 36" 16 40J45 4" 8 22-15/16" 36" 16 45 on 48" enter Line at. No. () R Gauge 34K45 3" 6 25-7/8" 48" 16 35K45 3-1/2" 7 26-7/8" 48" 16 44K45 4" 8 27-7/8" 48" 16 54K45 5" 10 29-7/8" 48" 14 64K45 6" 12 31-7/8" 48" 14 84K45 8" 16 31-7/8" 48" 14 10K45 10" 22 41-7/8" 48" 12 45 on 60" enter Line at. No. () R Gauge 40Q45 4" 8 32-7/8" 60" 16 60Q45 6" 12 36-7/8" 60" 14 90 on 24" enter Line at. No. () R Gauge 20P90 2-1/8" 6 30" 24" 16 25P90 2-1/2" 6 30" 24" 16 30P90 3" 6 30" 24" 16 40P90 4" 8 30" 24" 16 90 on 30" enter Line at. No. () R Gauge 32U90 3" 6 36" 30" 16 35U90 3-1/2" 7 37" 30" 16 42U90 4" 8 38" 30" 16 52U90 5" 10 40" 30" 14 62U90 6" 12 42" 30" 14 82U90 8" 16 48" 32" 14 90 on 36" enter Line at. No. () R Gauge 23J90 2-1/8" 6 42" 36" 16 25J90 2-1/2" 6 42" 36" 16 30J90 3" 6 42" 36" 16 35J90 3-1/2" 7 43" 36" 16 40J90 4" 8 44" 36" 16 90 on 48" enter Line at. No. () R Gauge 34K90 3" 6 54" 48" 16 35K90 3-1/2" 7 55" 48" 16 44K90 4" 8 56" 48" 16 54K90 5" 10 58" 48" 14 64K90 6" 12 60" 48" 14 84K90 8" 16 64" 48" 14 10K90 10" 22 70" 48" 12 90 on 60" enter Line at. No. () R Gauge 40Q90 4" 8 68" 60" 16 60Q90 6" 12 72" 60" 14 Furnished with straight ends as standard. Expanded ends available upon request, except on 8" and 10" bends and #11 gauge bends. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com 7
45 YLs H E at No. Size () E F H K R 24Y52 2-1/8"X2-1/8" 9-1/2" 2-1/8" 1-3/8" 2-1/8" 1-3/8" 4-11/16" 9-3/32" 5" K R 45 F 25Y42 2-1/2"X2-1/8" 10" 2-1/2" 1-3/8" 2-1/8" 1-3/8" 4-7/8" 9-9/32" 5" 25Y25 2-1/2"X2-1/2" 10" 2-1/2" 1-3/8" 2-1/2" 1-3/8" 5-3/16" 10-5/32" 6" 34Y52 3"X2-1/8" 10-1/2" 3" 1-3/8" 2-1/8" 1-3/8" 5-1/8" 9-17/32" 5" 34Y25 3"X2-1/2" 10-1/2" 3" 1-3/8" 2-1/2" 1-3/8" 5-7/16" 10-13/32" 6" 34Y53 3"X3" 11-1/2" 3" 1-3/8" 3" 1-3/8" 5-29/32" 11-19/32" 7-1/2" 35Y42 3-1/2"X2-1/8" 11" 3-1/2" 1-3/8" 2-1/8" 1-3/8" 5-3/8" 9-25/32" 5" 45 YL 35Y25 3-1/2"X2-1/2" 11" 3-1/2" 1-3/8" 2-1/2" 1-3/8" 5-11/16" 10-21/32" 6" 35Y43 3-1/2"X3" 13" 3-1/2" 1-3/8" 3" 1-3/8" 6-5/32" 11-27/32" 7-1/2" 35Y35 3-1/2"X3-1/2" 13" 3-1/2" 1-3/8" 3-1/2" 1-3/8" 6-9/16" 12-31/32" 8-3/4" 44Y52 4"X2-1/8" 12" 4" 1-3/8" 2-1/8" 1-3/8" 5-5/8" 10-1/32" 5" 44Y25 4"X2-1/2" 12" 4" 1-3/8" 2-1/2" 1-3/8" 5-15/16" 10-29/32" 6" 44Y53 4"X3" 12" 4" 1-3/8" 3" 1-3/8" 6-13/32" 12-3/32" 7-1/2" 44Y35 4"X3-1/2" 14" 4" 1-3/8" 3-1/2" 1-3/8" 6-13/16" 13-7/32" 8-3/4" 44Y54 4"X4" 14" 4" 1-3/8" 4" 1-3/8" 7-1/4" 14-11/32" 10" 54Y52 5"X2-1/8" 13" 5" 1-5/8" 2-1/8" 1-3/8" 6-1/8" 10-17/32" 5" 54Y25 5"X2-1/2" 13" 5" 1-5/8" 2-1/2" 1-3/8" 6-7/16" 11-13/32" 6" 54Y53 5"X3" 15-1/2" 5" 1-5/8" 3" 1-3/8" 6-29/32" 12-19/32" 7-1/2" 54Y35 5"X3-1/2" 15-1/2" 5" 1-5/8" 3-1/2" 1-3/8" 7-5/16" 13-23/32" 8-3/4" 54Y54 5"X4" 15-1/2" 5" 1-5/8" 4" 1-3/8" 7-3/4" 14-27/32" 10" 54Y55 5"X5" 18-1/2" 5" 1-5/8" 5" 1-5/8" 9" 17-9/16" 12-1/2" 64Y52 6"X2-1/8" 15" 6" 1-5/8" 2-1/8" 1-3/8" 6-5/8" 11-1/32" 5" 64Y25 6"X2-1/2" 15" 6" 1-5/8" 2-1/2" 1-3/8" 6-15/16" 11-29/32" 6" 64Y53 6"X3" 15" 6" 1-5/8" 3" 1-3/8" 7-13/32" 13-3/32" 7-1/2" 64Y35 6"X3-1/2" 17" 6" 1-5/8" 3-1/2" 1-3/8" 7-13/16" 14-7/32" 8-3/4" 64Y54 6"X4" 17" 6" 1-5/8" 4" 1-3/8" 8-1/4" 15-11/32" 10" 64Y55 6"X5" 21" 6" 1-5/8" 5" 1-5/8" 9-1/2" 18-1/16" 12-1/2" 64Y56 6"X6" 21" 6" 1-5/8" 6" 1-5/8" 10-25/32" 20-25/32" 15" 2-1/8" to 4" #16 gauge material. 5" to 8" #14 gauge material. 10" to 14" #12 gauge material. ontact Spencer for availability of #11 gauge items - straight ends only. Expanded ends standard through 6" size. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 8 The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
45 YLs K H E (ID) F R 45 at. No. Size () Fig. No. E F H K R 84Y52 8"X2-1/8" 1 18" 8" 2--1/8" 1-3/8" 7-5/8" 12-1/32" 5" 84Y25 8"X2-1/2" 1 18" 8" 2-1/2" 1-3/8" 7-15/16" 12-29/32" 6" 84Y53 8"X3" 1 18" 8" 3" 1-3/8" 8-13/32" 14-3/32" 7-1/2" 84Y35 8"X3-1/2" 1 21" 8" 3-1/2" 1-3/8" 8-13/16" 15-7/32" 8-3/4" 84Y54 8"X4" 1 21" 8" 4" 1-3/8" 9-1/4" 16-11/32" 10" 84Y55 8"X5" 1 24" 8" 5" 1-5/8" 10-1/2" 19-1/16" 12-1/2" 84Y56 8"X6" 1 24" 8" 6" 1-5/8" 11-25/32" 21-25/32" 15" 84Y58 8"X8" 2 29" 8" 8" 14-5/32" 27" 20" 45 YL Fig. No. 1 - ranch Expanded H E () 10Y52 10"X2-1/8" 1 21" 10" 2-1/8" 1-3/8" 8-5/8" 13-1/32" 5" 10Y25 10"X2-1/2" 1 21" 10" 2-1/2" 1-3/8" 8-15/16" 13-29/32" 6" 10Y53 10"X3" 1 21" 10" 3" 1-3/8" 9-13/32" 15-3/32" 7-1/2" 10Y35 10"X3-1/2" 1 24" 10" 3-1/2" 1-3/8" 9-13/16" 16-7/32" 8-3/4" 10Y54 10"X4" 1 24" 10" 4" 1-3/8" 10-1/4" 17-11/32" 10" 10Y55 10"X5" 1 24" 10" 5" 1-5/8" 11-1/2" 20-1/16" 12-1/2" 10Y56 10"X6" 1 28" 10" 6" 1-5/8" 12-25/32" 22-3/4" 15" 10Y58 10"X8" 2 32" 10" 8" 15-5/32" 28" 20" 10Y10 10"X10" 2 36" 10" 10" 18-5/8" 34-11/16" 32" K R 45 45 YL Fig. No. 2 - Straight Ends 12Y52 12"X2-1/8" 1 24" 12" 2-1/8" 1-3/8" 9-5/8" 14-1/32" 5" 12Y25 12"X2-1/2" 1 24" 12" 2-1/2" 1-3/8" 9-31/32" 14-29/32" 6" 12Y53 12"X3" 1 24" 12" 3" 1-3/8" 10-13/32" 16-3/32" 7-1/2" 12Y35 12"X3-1/2" 1 27" 12" 3-1/2" 1-3/8" 10-13/16" 17-7/32" 8-3/4" 12Y54 12"X4" 1 27" 12" 4" 1-3/8" 11-1/4" 18-11/32" 10" 12Y55 12"X5" 1 27" 12" 5" 1-5/8" 12-1/2" 21-1/16" 12-1/2" 12Y56 12"X6" 1 31" 12" 6" 1-5/8" 13-25/32" 23-3/4" 15" 12Y58 12"X8" 2 35" 12" 8" 16-5/32" 29" 20" 12Y10 12"X10" 2 39" 12" 10" 19-5/8" 35-11/16" 32" 12Y12 12"X12" 2 43" 12" 12" 21-27/32" 40-3/4" 36" 14Y52 14"X2-1/8" 1 24" 14" 2-1/8" 1-3/8" 10-5/8" 14-1/16" 5" 14Y25 14"X2-1/2" 1 24" 14" 2-1/2" 1-3/8" 10-15/16" 14-7/8" 6" 14Y53 14"X3" 1 24" 14" 3" 1-3/8" 11-3/8" 15-13/16" 7-1/2" 14Y35 14"X3-1/2" 1 27" 14" 3-1/2" 1-3/8" 11-13/16" 17-3/16" 8-3/4" 14Y54 14"X4" 1 30" 14" 4" 1-3/8" 12-1/4" 24-1/4" 10" 14Y55 14"X5" 1 30" 14" 5" 1-5/8" 13-9/16" 24-15/16" 12-1/2" 14Y56 14"X6" 1 31" 14" 6" 1-5/8" 14-3/4" 23-3/4" 15" 14Y58 14"X8" 2 38" 14" 8" 17-5/32" 30" 20" 14Y10 14"X10" 2 42" 14" 10" 20-5/8" 36-11/32" 32" 14Y12 14"X12" 2 46" 14" 12" 22-27/32" 41-3/4" 36" 14Y14 14"X14" 2 52" 14" 14" 24-13/32" 45-15/16" 36" 2-1/8" to 4" #16 gauge material. 5" to 8" #14 gauge material. 10" to 14" #12 gauge material. ontact Spencer for availability of #11 gauge items - straight ends only. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com 9
90 TYs at. No. Size () E F H K R H 29T02 2-1/8"X2-1/8" 9-1/2" 2-1/8" 1-3/8" 2-1/8" 1-3/8" 8-13/16" 9-5/32" 5" E K R 90 F 25T92 2-1/2"X2-1/8" 10" 2-1/2" 1-3/8" 2-1/8" 1-3/8" 9" 9-11/32" 5" 25T25 2-1/2"X2-1/2" 10" 2-1/2" 1-3/8" 2-1/2" 1-3/8" 10-1/32" 10-1/2" 6" 39T02 3"X2-1/8" 10-1/2" 3" 1-3/8" 2-1/8" 1-3/8" 9-1/4" 9-19/32" 5" 39T25 3"X2-1/2" 10-1/2" 3" 1-3/8" 2-1/2" 1-3/8" 10-9/32" 10-3/4" 6" 39T03 3"X3" 11-1/2" 3" 1-3/8" 3" 1-3/8" 11-25/32" 12-3/8" 7-1/2" 90 TY 35T92 3-1/2"X2-1/8" 11" 3-1/2" 1-3/8" 2-1/8" 1-3/8" 9-1/2" 9-27/32" 5" 35T25 3-1/2"X2-1/2" 11" 3-1/2" 1-3/8" 2-1/2" 1-3/8" 10-17/32" 11" 6" 35T93 3-1/2"X3" 13" 3-1/2" 1-3/8" 3" 1-3/8" 12-1/32" 12-5/8" 7-1/2" 35T35 3-1/2"X3-1/2" 13" 3-1/2" 1-3/8" 3-1/2" 1-3/8" 13-11/32" 14-1/8" 8-3/4" 49T02 4"X2-1/8" 12" 4" 1-3/8" 2-1/8" 1-3/8" 9-3/4" 10-3/32" 5" 49T25 4"X2-1/2" 12" 4" 1-3/8" 2-1/2" 1-3/8" 10-25/32" 11-1/4" 6" 49T03 4"X3" 12" 4" 1-3/8" 3" 1-3/8" 12-9/32" 12-7/8" 7-1/2" 49T35 4"X3-1/2" 14" 4" 1-3/8" 3-1/2" 1-3/8" 13-19/32" 14-3/8" 8-3/4" 49T04 4"X4" 14" 4" 1-3/8" 4" 1-3/8" 14-29/32" 15-7/8" 10" 59T02 5"X2-1/8" 13" 5" 1-5/8" 2-1/8" 1-3/8" 10-1/4" 10-19/32" 5" 59T25 5"X2-1/2" 13" 5" 1-5/8" 2-1/2" 1-3/8" 11-9/32" 11-3/4" 6" 59T03 5"X3" 15-1/2" 5" 1-5/8" 3" 1-3/8" 12-25/32" 13-3/8" 7-1/2" 59T35 5"X3-1/2" 15-1/2" 5" 1-5/8" 3-1/2" 1-3/8" 14-3/32" 14-7/8" 8-3/4" 59T04 5"X4" 15-1/2" 5" 1-5/8" 4" 1-3/8" 15-13/32" 16-3/8" 10" 59T05 5"X5" 18-1/2" 5" 1-5/8" 5" 1-5/8" 18-5/8" 19-3/8" 12-1/2" 69T02 6"X2-1/8" 15" 6" 1-5/8" 2-1/8" 1-3/8" 10-3/4" 11-3/32" 5" 69T25 6"X2-1/2" 15" 6" 1-5/8" 2-1/2" 1-3/8" 11-25/32" 12-1/4" 6" 69T03 6"X3" 15" 6" 1-5/8" 3" 1-3/8" 13-9/32" 13-7/8" 7-1/2" 69T35 6"X3-1/2" 17" 6" 1-5/8" 3-1/2" 1-3/8" 14-19/32" 15-3/8" 8-3/4" 69T04 6"X4" 17" 6" 1-5/8" 4" 1-3/8" 15-29/32" 16-7/8" 10" 69T05 6"X5" 21" 6" 1-5/8" 5" 1-5/8" 19-1/8" 19-7/8" 12-1/2" 69T06 6"X6" 21" 6" 1-5/8" 6" 1-5/8" 22-11/32" 22-7/8" 15" 2-1/8" to 4" #16 gauge material. 5" to 8" #14 gauge material. 10" to 14" #12 gauge material. ontact Spencer for availability of #11 gauge items - straight ends only. Expanded ends standard through 6" size. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 10The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
90 TYs K H R 90 F E at. No. Size () Fig. No. E F H K R 89T02 8"X2-1/8" 1 18" 8" 2-1/8" 1-3/8" 11-3/4" 12-3/32" 5" 89T25 8"X2-1/2" 1 18" 8" 2-1/2" 1-3/8" 12-25/32" 13-1/4" 6" 89T03 8"X3" 1 18" 8" 3" 1-3/8" 14-9/32" 14-7/8" 7-1/2" 89T35 8"X3-1/2" 1 21" 8" 3-1/2" 1-3/8" 15-19/32" 16-3/8" 8-3/4" 89T04 8"X4" 1 21" 8" 4" 1-3/8" 16-29/32" 17-7/8" 10" 89T05 8"X5" 1 24" 8" 5" 1-5/8" 20-1/8" 20-7/8" 12-1/2" 89T06 8"X6" 1 24" 8" 6" 1-5/8" 23-11/32" 23-7/8" 15" 89T08 8"X8" 2 29" 8" 8" 29-17/32" 29-7/8" 20" 90 TY Fig. No. 1 - ranch Expanded K 90 TY Fig. No. 2 - Straight Ends H R 90 E 10T02 10"X2-1/8" 1 21" 10" 2-1/8" 1-3/8" 12-3/4" 13-3/32" 5" 10T25 10"X2-1/2" 1 21" 10" 2-1/2" 1-3/8" 13-25/32" 14-1/4" 6" 10T03 10"X3" 1 21" 10" 3" 1-3/8" 15-9/32" 15-7/8" 7-1/2" 10T35 10"X3-1/2" 1 24" 10" 3-1/2" 1-3/8" 16-17/32" 17-3/8" 8-3/4" 10T04 10"X4" 1 24" 10" 4" 1-3/8" 17-29/32" 18-7/8" 10" 10T05 10"X5" 1 24" 10" 5" 1-5/8" 21-1/8" 21-7/8" 12-1/2" 10T06 10"X6" 1 28" 10" 6" 1-5/8" 24-11/32" 24-7/8" 15" 10T08 10"X8" 2 32" 10" 8" 30-17/32" 30-7/8" 20" 10T10 10"X10" 2 36" 10" 10" 42-25/32" 40-3/8" 32" 12T02 12"X2-1/8" 1 24" 12" 2-1/8" 1-3/8" 13-3/4" 14-3/32" 5" 12T25 12"X2-1/2" 1 24" 12" 2-1/2" 1-3/8" 14-25/32" 15-1/4" 6" 12T03 12"X3" 1 24" 12" 3" 1-3/8" 16-9/32" 16-7/8" 7-1/2" 12T35 12"X3-1/2" 1 27" 12" 3-1/2" 1-3/8" 17-19/32" 18-3/8" 8-3/4" 12T04 12"X4" 1 27" 12" 4" 1-3/8" 18-29/32" 19-7/8" 10" 12T05 12"X5" 1 27" 12" 5" 1-5/8" 22-1/8" 22-7/8" 12-1/2" 12T06 12"X6" 1 31" 12" 6" 1-5/8" 25-11/32" 25-7/8" 15" 12T08 12"X8" 2 35" 12" 8" 31-17/32" 31-7/8" 20" 12T10 12"X10" 2 39" 12" 10" 43-25/32" 41-3/8" 32" *12T12 12"X12" 2 43" 12" 12" 49-1/8" 46-7/8" 36" 14T02 14"X2-1/8" 1 24" 14" 2-1/8" 1-3/8" 14-3/4" 14-1/8" 5" 14T25 14"X2-1/2" 1 24" 14" 2-1/2" 1-3/8" 15-3/4" 15-1/4" 6" 14T03 14"X3" 1 24" 14" 3" 1-3/8" 17-5/16" 16-13/16" 7-1/2" 14T35 14"X3-1/2" 1 27" 14" 3-1/2" 1-3/8" 18-5/8" 18-3/8" 8-3/4" 14T04 14"X4" 1 30" 14" 4" 1-3/8" 19-7/8" 25-3/4" 10" 14T05 14"X5" 1 31" 14" 5" 1-5/8" 23-1/8" 23-7/8" 12" 14T06 14"X6" 1 31" 14" 6" 1-5/8" 26-5/16" 22-7/8" 15" 14T08 14"X8" 2 38" 14" 8" 32-17/23" 32-7/8" 20" 14T10 14"X10" 2 42" 14" 10" 44-25/32" 42-3/8" 32" *14T12 14"X12" 2 46" 14" 12" 50-1/8" 47-7/8" 36" *14T14 14"X14" 2 52" 14" 14" 50-3/4" 51-3/8" 36" * Segmented branch. 2-1/8" to 4" #16 gauge material. 5" to 8" #14 gauge material. 10" to 14" #12 gauge material. ontact Spencer for availability of #11 gauge items - straight ends only. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com11
DOULE FITTINGS Standard Double 90 TYs K H R 90 Standard Double 90 TY F E at.no. Size () E F H K R 29DT02 2-1/8"x2-1/8" 9-1/2" 2-1/8 1-3/8" 2-1/8 1-3/8" 8-13/16" 9-5/32" 5" 25DT25 2-1/2"x2-1/2" 10" 2-1/2 1-3/8" 2-1/2 1-3/8" 10-1/32" 10-1/2" 6" 39DT03 3"x3" 11-1/2" 3 1-3/8" 3 1-3/8" 11-25/32" 12-3/8" 7-1/2" 35DT35 3-1/2"x3-1/2" 13" 3-1/2 1-3/8" 3-1/2 1-3/8" 13-11/32" 14-1/8" 8-3/4" 49DT04 4"x4" 14" 4 1-3/8" 4 1-3/8" 14-29/32" 15-7/8" 10" 59DT05 5"x5" 18-1/2" 5 1-5/8" 5 1-5/8" 18-5/8" 19-3/8" 12-1/2" 69DT06 6"x6" 21" 6 1-5/8" 6 1-5/8" 22-11/32" 22-7/8" 15" Standard Double 45 YLs H E at.no. Size () E F H K R K F R 45 24DY52 2-1/8"x2-1/8" 9-1/2" 2-1/8 1-3/8" 2-1/8 1-3/8" 4-11/16" 9-3/32" 5" 25DY25 2-1/2"x2-1/2" 10" 2-1/2 1-3/8" 2-1/2 1-3/8" 5-3/16" 10-5/32" 6" 34DY53 3"x3" 11-1/2" 3 1-3/8" 3 1-3/8" 5-29/32 11-19/32" 7-1/2" Standard Double 45 YL 35DY35 3-1/2"x3-1/2" 13" 3-1/2 1-3/8" 3-1/2 1-3/8" 6-9/16" 12-31/32" 8-3/4" 44DY54 4"x4" 14" 4 1-3/8" 4 1-3/8" 7-1/4" 14-11/32" 10" 54DY55 5"x5" 18-1/2" 5 1-5/8" 5 1-5/8" 9" 17-9/16" 12-1/2" 64DY56 6"x6" 21" 6 1-5/8" 6 1-5/8" 10-15/32" 20-25/32" 15" K H E R F 90 F Standard Double 90 Elbow Standard Double 90 Elbows at.no. Size () E F H K R 20DL90 2-1/8"x2-1/8" 2-1/8 1-3/8" 2-1/8 1-3/8" 7" 7" 5" 25DL90 2-1/2"x2-1/2" 2-1/2 1-3/8" 2-1/2 1-3/8" 8" 8" 6" 30DL90 3"x3" 3 1-3/8" 3 1-3/8" 9-1/2" 9-1/2" 7-1/2" 35DL90 3-1/2"x3-1/2" 3-1/2 1-3/8" 3-1/2 1-3/8" 10-3/4" 10-3/4" 8-3/4" 40DL90 4"x4" 4 1-3/8" 4 1-3/8" 12" 12" 10" 50DL90 5"x5" 5 1-5/8" 5 1-5/8" 15-1/8" 15-1/8" 12-1/2" 60DL90 6"x6" 6 1-5/8" 6 1-5/8" 18-1/4" 18-1/4" 15" 2-1/8" O.D. to 4" O.D. - #16 gauge material 5" O.D. to 8" O.D. - #14 gauge material 10" O.D. to 14" O.D. - #12 gauge material Expanded ends standard through 6" size. When Ordering Specify Material: arbon Steel, Galvanized Steel, Stainless Steel and luminum. 12The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
OUPLINGS D D E Standard Reducing oupling (straight end) E Standard Reducing oupling (expanded end) F at. No. Size D () x (ID) Reducing ouplings F E Gauge *22R15 2-1/8"X1-1/2" 5-3/16" 1-7/8" 2" 16 *22R20 2-1/8"X2" 4" 1-25/32" 2" 16 25R22 2-1/2"X2-1/8" 4-1/2" 1-3/4" 1-3/8" 1-1/2" 16 03R22 3"X2-1/8" 8-3/4" 2-1/4" 1-3/8" 2" 16 32R25 3"X2-1/2" 5" 2" 1-3/8" 1-1/2" 16 35R22 3-1/2"X2-1/8" 11" 2-1/4" 1-3/8" 2" 16 35R25 3-1/2"X2-1/2" 9-1/4" 2-7/8" 1-3/8" 2-7/8" 16 35R23 3-1/2"X3" 5-1/2" 2-1/8" 1-3/8" 2-1/8" 16 04R22 4"X2-1/8" 13-1/2" 1-5/8" 1-3/8" 2" 16 42R25 4"X2-1/2" 10-1/2" 2-1/4" 1-3/8" 2" 16 04R23 4"X3" 9-1/4" 2-1/4" 1-3/8" 2" 16 42R35 4"X3-1/2" 6" 2" 1-3/8" 1-1/2" 16 05R22 5"X2-1/8" 19-1/4" 2-1/4" 1-3/8" 2-3/4" 14 52R25 5"X2-1/2" 17-1/2" 2-1/4" 1-3/8" 2-3/4" 14 05R23 5"X3" 15" 2-1/4" 1-3/8" 2-3/4" 14 52R35 5"X3-1/2" 12-1/2" 2-1/4" 1-3/8" 2-3/4" 14 05R24 5"X4" 8" 2-1/4" 1-3/8" 1-3/4" 14 06R22 6"X2-1/8" 24-3/4" 2-1/4" 1-3/8" 3-1/4" 14 62R25 6"X2-1/2" 23" 2-1/4" 1-3/8" 3-1/4" 14 06R23 6"X3" 20-1/2" 2-1/4" 1-3/8" 3-1/4" 14 62R35 6"X3-1/2" 18" 2-1/4" 1-3/8" 3-1/4" 14 06R24 6"X4" 15-3/4" 2-1/4" 1-3/8" 3-1/4" 14 06R25 6"X5" 10" 2-5/8" 1-3/8" 1-3/4" 14 08R24 8"X4" 26-1/4" 2" 1-3/8" 4-1/4" 14 08R25 8"X5" 21-7/8" 2-5/8" 1-5/8" 4-1/4" 14 08R26 8"X6" 17-1/2" 3-1/4" 1-5/8" 3-5/8" 14 10R25 10"X5" 32-7/8" 2-5/8" 1-5/8" 5-1/4" 12 10R26 10"X6" 28-1/2" 3-1/4" 1-5/8" 5-1/4" 12 *10R28 10"X8" 18-1/4" 2-1/2" 5-1/4" 12 *12R28 12"X8" 29-1/4" 2-1/2" 6-1/4" 12 *12R10 12"X10" 19-3/4" 3-1/4" 6" 12 *14R10 14"X10" 30" 3" 7-1/4" 12 *14R12 14"X12" 20" 4" 7-1/4" 12 Standard reducers are x ID (straight x expanded), except as noted by (*). *Size is x (straight x straight). ontact Spencer for availability of #11 gauge items - straight ends only. Slip oupling Slip ouplings at No. Size (ID) Gauge 0220 2-1/8" 3" 16 2500 2-1/2" 3-1/2" 16 0330 3" 4" 16 3500 3-1/2" 4-1/2" 16 0440 4" 5" 16 0550 5" 6" 14 0660 6" 7" 14 0880 8" 8" 14 1010 10" 10" 12 1212 12" 12" 12 1414 14" 14" 12 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com13
DPTERS Male dapters at. No. D (MPT) x () Gauge D Male dapter 23M20 2"X2" 6" 16 23M82 2"X2-1/8" 6" 16 25M25 2-1/2"X2-1/2" 6" 16 33M83 3"X3" 6" 16 35M35 3-1/2"X3-1/2" 6" 16 43M84 4"X4" 6" 16 53M85 5"X5" 6-1/2" 14 63M86 6"X6" 7" 14 83M88 8"X8" 8" 14 10M10 10"X10" 8-1/2" 12 12M12 12"X12" 9" 12 ontact Spencer for availability of #11 gauge items - straight ends only. Expanded Male dapters D Expanded Male dapter at. No. D (MPT) x (ID) Gauge 02E20 2"X2" 4" 1-1/8" 16 02E32 2"X2-1/8" 4" 1-3/8" 16 25E25 2-1/2"X2-1/2" 4" 1-3/8" 16 03E33 3"X3" 4-3/4" 1-3/8" 16 35E35 3-1/2"X3-1/2" 4-3/4" 1-3/8" 16 04E34 4"X4" 4-3/4" 1-3/8" 16 05E35 5"X5" 5" 1-5/8" 14 06E36 6"X6" 5-1/4" 1-5/8" 14 Female dapters at. No. D (FPT) x () Gauge D Female dapter 22F20 2"X2" 6" 16 22F82 2"X2-1/8" 6" 16 25F25 2-1/2"X2-1/2" 6" 16 32F83 3"X3" 6" 16 35F35 3-1/2"X3-1/2" 6" 16 42F84 4"X4" 6-1/2" 16 52F85 5"X5" 6-3/4" 14 62F86 6"X6" 7" 14 82F88 8"X8" 9" 14 10F10 10"X10" 11" 12 12F12 12"X12" 13" 12 ontact Spencer for availability of #11 gauge items - straight ends only. Expanded Female dapters at. No. D (FPT) x (ID) Gauge D 02X20 2"X2" 4" 1-3/8" 16 02X42 2"X2-1/8" 6" 1-3/8" 16 25X25 2-1/2"X2-1/2" 5" 1-3/8" 16 03X43 3"X3" 5-1/4" 1-3/8" 16 35X35 3-1/2"X3-1/2" 5-1/2" 1-3/8" 16 04X44 4"X4" 6-1/2" 1-3/8" 16 05X45 5"X5" 6-3/4" 1-5/8" 14 06X46 6"X6" 7" 1-5/8" 14 Expanded Female dapter When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 14The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
DPTERS Female Reducing dapters at. No. D (FPT) x () Gauge D 25E02 2"X2-1/2" 4-1/4" 16 Female Reducing dapter Expanded Female Reducing dapters D at. No. D (FPT) x (ID) Gauge Expanded Female Reducing dapter H 02E52 2"X2-1/2" 4-1/4" 1-3/8" 16 dapter Tees at. No. (ID) x D (FPT) H dapter Tee D *02D62 2-1/8"X2" 4-13/16" 1-3/8" 1-9/16" 25D62 2-1/2"X2" 6-1/2" 1-3/8" 2-1/8" 03D62 3"X2" 6-1/2" 1-3/8" 2-3/4" 35D62 3-1/2"X2" 6-7/8" 1-3/8" 3-7/16" 04D62 4"X2" 6-7/8" 1-3/8" 3-7/16" *02D62 available only in: ast Gray Iron, Galvanized Steel, ast luminum or Stainless Steel. 90 Elbow dapters D at. No. (ID) x D (FPT) E E *02D92 2-1/8"X2" 1-5/8" 1-3/8" 2-9/16" *02D92 available only in: ast Gray Iron, Galvanized Steel, ast luminum or Stainless Steel. 90 Elbow dapter D 45 Female Elbow dapters at. No. (ID) x D (FPT) R Gauge R 45 02D72 2-1/8"X2" 4-1/16" 1-3/8" 5" 16 25D72 2-1/2"X2" 4-1/2" 1-3/8" 6" 16 25D25 2-1/2"X2-1/2" 4-1/2" 1-3/8" 6" 16 45 Female Elbow dapter Male dapter Nipples at. No. (ID) (MPT) 02N22 2-1/8" 2" 2" 2-1/8" Male dapters at. No. (MPT) x Male dapter Nipple 125M82 1-1/4"X2-1/8" 5-3/4" 150M82 1-1/2"X2-1/8" 5-3/4" 125E32 1-1/4"X2-1/8" ID 5-3/4" 150E32 1-1/2"X2-1/8" ID 5-3/4" When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum, except as noted above. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com15
MISELLNEOUS 3/8" Hole Tubing Hanger D Tubing Plug Tubing Hangers at. No. (ID) Gauge 00H20 2-1/8" 7/8" 16 00H25 2-1/2" 7/8" 16 00H30 3" 7/8" 16 00H35 3-1/2" 7/8" 16 00H40 4" 7/8" 16 00H50 5" 7/8" 16 00H60 6" 7/8" 16 00H80 8" 7/8" 16 10H00 10" 7/8" 16 12H00 12" 7/8" 16 14H00 14" 7/8" 16 Tubing Hangers available only in: Galvanized Steel. Tubing Plugs at. No. () D 02G01 2-1/8" 2-1/4" 16 Ga. 1-3/8" 02G51 2-1/2" 2-5/8" 16 Ga. 1-3/8" 03G01 3" 3-1/8" 16 Ga. 1-3/8" 03G51 3-1/2" 3-5/8" 16 Ga. 1-3/8" 04G01 4" 4-1/8" 16 Ga. 1-3/8" 05G01 5" 5-1/8" 14 Ga. 1-1/2" 06G01 6" 6-1/8" 14 Ga. 1-1/2" Tubing Plugs () available only in: Galvanized Steel, Stainless Steel, and luminum. at. No. (ID) D 08G01 8" 8-1/2" 14 Ga. 1-3/4" 10G01 10" 10-9/16" 12 Ga. 2" 12G01 12" 12-1/2" 12 Ga. 2" 14G01 14" 14-1/2" 12 Ga. 2" Tubing Plugs (ID) available only in: Galvanized Steel, Stainless Steel, and luminum. D Tubing Plug ID Tubing Nipple E Slip Welding ollar Tubing Nipples at. No. () Gauge 02N12 2-1/8" 2-1/2" 16 25N12 2-1/2" 2-1/2" 16 03N13 3" 2-1/2" 16 03N53 3-1/2" 2-1/2" 16 04N14 4" 2-1/2" 16 05N15 5" 3" 14 06N16 6" 3" 14 08N18 8" 4" 14 10N10 10" 5" 12 12N12 12" 6" 12 14N14 14" 7" 12 Tubing Nipples available only in: Galvanized Steel, Stainless Steel and luminum. Slip Welding ollars at. No. (ID) Gauge 08W28 8" 3" 14 10W10 10" 3" 12 12W12 12" 3" 12 14W14 14" 3" 12 Slip Welding ollars available in: arbon Steel, Galvanized Steel, Stainless Steel, and luminum. When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum, except as noted above. 16The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
JOINING METHS These couplings are used to join a tubing system. It is recommended for use in situations where a system may be taken apart due to cleaning requirements or system changes. Quick lamp oupling ap Size ouplings aps Part No. Length Part No. Length 1-1/2" OT90379 4" PT90048 3" 2" OT90385 4" PT90049 3" 2-1/8" OT90370 4" PT90050 3" 2-1/2" OT90371 4" PT90051 3" 3" OT90380 6" PT90052 3" 3-1/2" OT90381 6" PT90053 3" 4" OT90382 4" PT90054 3" 5" OT90383 8" PT90055 3" 6" OT90384 8" PT90056 3" ouplings and aps are galvanized steel. Standard O-ring is black nitrile up to 4". Silicon O-ring standard for 5" and 6". Viton O-rings also available. Quick lamp ouplings & aps ompression ouplings ompression oupling Tube Size Part No. Length Number olts olt Size Weight 2-1/8" OT90200 4" 2 1/2"x2" 2.1 2-1/2" OT90201 4" 2 1/2"x2" 2.6 3" OT90202 6" 3 5/8"x2-1/4" 4.5 3-1/2" OT90203 6" 3 5/8"x2-1/4" 5.9 4" OT90204 6" 3 5/8"x2-1/4" 5.3 5" OT90205 6" 3 5/8"x2-1/4" 6.2 6" OT90206 6" 3 5/8"x2-1/4" 7.0 8" OT90207 8" 3 3/4"x3" 14.3 10" OT90208 10" 4 3/4"x3" 21.8 12" OT90209 10" 4 3/4"x3" 25.5 14" OT90210 10" 4 3/4"x3" 27.6 Standard coupling is galvanized steel with black neoprene gasket and stainless steel grounding strip. Fittings should be ordered with straight ends to be able to butt together within the ID of the coupling. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com17
RUER SLEEVES ND LMPS Rubber sleeves and clamps are used as a flexible joint in low pressure and vacuum systems. Spencer Rubber Sleeves are available to fit sheet metal pipe (tubing), wrought iron pipe or cast iron pipe. Standard sleeves 1-7/8" through 10-3/4" are constructed of 1/16" inner tube, 4 ply duck, and are frictioned cover. 12" through 26" are constructed of 1/16" inner tube, 5 ply duck, and are frictioned cover. High temperature sleeves are for pressures 5 to 15 psi and are made of a butyl compound of at least 2 ply. They will withstand up to 300 F. Normal Size Type Nominal ID Length High Temperature Sleeve With lamps Part No. lamp Only Part No. lamp Qty. 1-1/2 WP 1-7/8 6 K90006 LM90001 2 2 WP 2-1/4 4 K90007 LM90001 2 2-1/8 SMP 2-1/8 4 K90008 LM90001 2 2-1/2 SMP 2-1/2 4 K90054 LM90002 2 2-1/2 WP 2-7/8 4 K90055 LM90002 2 3 SMP 3 6 K90010 LM90002 2 3 WP 3-1/2 6 K90035 LM90003 2 4 SMP 4 6 K90036 LM90003 2 4 WP 4-1/2 6 K90037 LM90004 2 5 SMP 5 6 K90038 LM90005 2 5 WP 5-5/8 6 K90039 LM90005 2 6 SMP 6 6 K90040 LM90027 2 6 WP 6-5/8 6 K90041 LM90006 2 8 SMP 8 6 K90042 LM90007 2 8 WP 8-5/8 6 K90043 LM90007 2 10 SMP 10 6 K90044 LM90008 2 10 WP 10-3/4 6 K90045 LM90008 2 12 SMP 12 6 K90046 LM90009 2 12 WP 12-3/4 6 K90047 LM90022 2 14 SMP/WP 14 12 K90048 LM90023 4 16 SMP/WP 16 12 K90050 LM90024 4 18 SMP/WP 18 12 K90051 LM90025 4 20 SMP/WP 20 12 K90052 LM90008 8 22 SMP/WP 22 12 K90030 LM90008 4 LM90009 4 24 SMP/WP 24 12 K90031 LM90009 8 26 SMP/WP 26 12 K90032 LM90007 12 28 SMP/WP 28 12 K90033 LM90007 8 LM90008 4 30 SMP/WP 30 12 K90034 LM90008 12 Dimensions in inches. SMP - For Sheet Metal Pipe (SMP sleeve actually 3/16 larger in diameter to fit over piping). lso used for tubing connections. WP - For Wrought Pipe, designed to fit of Wrought Steel or Wrought Iron Pipe. 18The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
SHRINK SLEEVES Shrink sleeves are 4" long polyolefin bands lined with a meltable adhesive for sealing tubing joints under vacuum. pplying billowy flame or other heat source causes the sleeve to shrink tightly around a tubing joint while the adhesive melts and fills any minor voids making a vacuum tight joint. at. No. Part No. Tube Size 20S20 SLV90002 2-1/8" 25S25 SLV90002 2-1/2" 30S30 SLV90003 3" 35S35 SLV90004 3-1/2" 40S40 SLV90004 4" 50S50 SLV90006 5" 60S60 SLV90006 6" 80S80 SLV90007 8" 10S10 SLV90023 10" 12S12 SLV90024 12" 14S14 SLV90014 14" 1 Flash joint lightly with torch to remove excess foreign matter, then place Shrink Sleeve on tubing or fitting. 2 Join tubing and fitting together. enter Shrink Sleeve over joint. 3 Heat Shrink Sleeve with wide billowy flame. Do Not Use Pin Point Flame. Work flame around joint evenly. 4 t 250 F Shrink Sleeve will tighten around tube and adhesive will appear from sides. Remove flame and allow to cool. Joint is complete. WETHER PS Weather aps are used on the intake of a blower or the outlet of a vacuum producer to eliminate water, snow and other elements from entering the machine. Outlet Size (ID) Part No. 3" W90001 4" W90003 5" W90005 6" W90006 8" W90008 10" W90009 12" W90010 14" W90011 16" W90012 20" W90013 22" W90014 3" - 8" 10" - 22" The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com19
HOSES onsider the application, the size and service requirements when selecting a hose. 1-1/4" ID hose is recommended for light commercial duty. It is lightest in weight and with superior flexibility. 1-1/2" ID hose is the most common and used for average vacuum cleaning applications. 2" ID hose is recommended for large quantities or bulky materials. Note: For other diameter hose or special applications consult factory. oth the 1-1/4" and 1-1/2" ID hoses are used with our 1-1/2" attachments. 2" ID hose is used with 2" attachments. Hoses are supplied with one male and one female coupling. The male coupling connects into the inlet valve; the female coupling connects directly to tools or attachments. Hoses may be joined for additional length using the standard male and female couplings. HOSE SSEMLIES (EXEPT TUFF-FLEX ND YELLOW R RE PRUTS) RE TESTED FOR ELETRIL ONDUTIVITY TO SSURE STTI ELETRIITY IS MINIMIZED. Inside Lengths and Part Numbers Hose Type Diameter 12 1 /2' 25' 37 1 /2' 50' Light-Duty HI 1 PV 1 /2" HOS90164 HOS90166 HOS90168 HOS90170 2" HOS90176 HOS90178 HOS90180 HOS90182 Medium-Duty Polyethylene TUFF-FLEX NON STTI RESISTNT 1 1 /4" HOS90081 HOS90082 HOS90212 HOS90083 1 1 /2" HOS90077 HOS90078 HOS90079 HOS90080 2" HOS90084 HOS90085 HOS90086 HOS90087 1 1 /2" HOS90088 HOS90089 HOS90090 HOS90091 Heavy-Duty PV KLM 1 1 /2" HOS90188 HOS90190 HOS90192 HOS90194 2" HOS90200 HOS90202 HOS90204 HOS90206 Heavy-Duty Urethane SPENER-FLEX 1 1 /2" HOS90241 HOS90243 HOS90245 HOS90247 Heavy-Duty Vinyl PYTHON 1 1 /2" HOS90101 HOS90103 HOS90105 HOS90107 2" HOS90109 HOS90111 HOS90113 HOS90115 Heavy-Duty Rubber RHINO 1 1 /2" HOS90117 HOS90119 HOS90208 HOS90121 2" HOS90123 HOS90125 HOS90210 HOS90127 20The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
HOSES R RE KIT K90104 onvenient all-in-one operator package with 15' long, 1-1/2" diameter yellow plastic hose, coupling, duck foot cleaning tool and tool holder. K90108 Same as above with static resistant hose. Replacement rubber backing RU90001 Weight (lbs./ft.) Vacuum Rating "Hg olor Flexibility Durability pplication onstruction.26.37 26 25 Grey Grey Excellent Excellent Fair Fair ommercial, Light Industrial Duty, Offices (Temp Range: 20 to +150 F) Fiber-reinforced PV Hose over Spring Steel Helix Static Resistant.28.41.50 25 20 12 Grey lue lue Excellent Excellent Excellent Good Good Good General Vacuum leaning, ommercial, ar Wash, Offices (Temp Range: 20 to +150 F) Polyethylene Two-Piece onstruction rush Proof.41 20 Orange Excellent Good.40.50 28 28 lue lue Good Good Very Good Very Good General Service, Schools, Industrial leaning (Temp Range: 22 to +104 F) PV ompound Plastic Helix opper Ground Wire brasion Resistant Static Resistant.32 24 lue w/ lack Very Good Excellent General Service, Industrial leaning, Schools (Temp Range: 40 to +170 F) PV Helix Urethane ore brasion Resistant opper Ground Wire hemical Resistant Static Resistant.50.60 29.8 29.8 lue lue Very Good Very Good Very Good Very Good General Service, Schools, Hospitals, lean Rooms (Temp Range: 20 to +120 F) Smooth Vinyl over Steel Wire Nylon Yarn Foam Inner Wall hemical Resistant Static Resistant.7.9 28 28 lack lack Good Good Excellent Excellent Industrial and Heavy ommercial Vacuum leaning infactories, Foundries (Temp Range: 40 to +200 F) raided SS Ground Wire Nitrile Rubber Tube brasion Resistant Neoprene over Oil Resistant Static Resistant The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com21
WLL INLET VLVES FOR 1-1/2" DIMETER HOSE Inlet valves provide a quick connection of the male hose coupling to the piping system or separator. The cover is self-closing and includes a hook to prevent the hose from being pulled out. Valve bodies are forged brass, covers are steel, and the entire valve is nickel plated. Four basic valves are available. Each may be fitted with a standard or recessed escutcheon plate. The basic valves are used with exposed piping in basements, on concrete walls, in factories or on separators. The standard wall flange is recommended for most typical installations. Valve protrusion into the room is only 1 inch. Furthermore, the face of the threaded connection can be as little as 13/16 of an inch from the wall advantageous where space is limited. The recessed flange is recommended for areas using flush wall design. It is considered a more attractive installation. Optimum mounting height of wall valves is 18 to 20 inches above floor level. NOTE: Optional lock type covers are available. 2" male thread-exposed pipe. The popular (standard) valve. 2 11 /32" long. VLV90083 (VLV90091 Lock Type) (8720-Type E) 1.13 lb. 2" female thread-exposed pipe. 2 13 /32" long. VLV90101 (VLV90102 Lock Type) (8815-Type E) 1.50 lb. 2" male thread VLV90083 with standard flange. VLV90084 (VLV90093 Lock Type ) (8705-Type D) 1.50 lb. 2" female thread VLV90101 with standard flange. VLV90103 (VLV90104 Lock Type) (8805-Type D) 1.78 lb. 2" male thread VLV90083 with recessed flange. VLV90085 (VLV90095 Lock Type ) (8705-Type D) 1.63 lb. 2" female thread VLV90101 with recessed flange. VLV90105 (VLV90106 Lock Type) (8810-Type D) 1.75 lb. 2" male thread-exposed pipe with short body. 1 7 /8" long. VLV90087 (VLV90092 Lock Type) (8730-Type E) 1.00 lb. 2" male thread VLV90087 with standard flange. For limited wall space. VLV90088 (VLV90094 Lock Type) (8715-Type D) 1.25 lb. 1 1 / 2" male thread-exposed pipe. Use when a1 1 / 2" thread must be used. 2 7 /16" long. VLV90082 (VLV90090 Lock Type) (8740-Type ) 1.13 lb. 1 1 / 2" male thread VLV90082 with standard flange. VLV90089 (VLV90097 Lock Type) (8745-Type ) 1.25 lb. 2" male thread VLV90087 with recessed flange. For limited wall space. VLV90086 (VLV90096 Lock Type) (8715-Type D) 1.25 lb. 1 1 / 2" male thread VLV90082 with recessed flange. VLV90098 (VLV90099 Lock Type) (8745-Type ) 1.25 lb. 304SS version of an 8720 Type E inlet valve with 2" male thread valve. VLV90239 1.13 lb. 304SS recessed flange to fit VLV90239. FLG90024 0.3 lb. 304SS standard flange to fit VLV90239 (Not Shown). FLG90025 0.2 lb. 22The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
FLOOR INLET VLVES FOR 1-1/2" DIMETER HOSE When it is inconvenient to use wall valves, floor valves are available. The valve is made of forged brass with a natural brush finish. It is designed to maintain its original appearance even in heavy traffic areas. It is recommended that the hose be connected to these valves using a Part No. EVT90005 floor elbow. 2" male thread Installed flush with floor surface. VLV90110 (VLV90111 Lock Type) (8900-Type G) 1.88 lb. 2" male thread eveled edge designed for use with carpets. VLV90112 (VLV90113 Lock Type ) (8905-Type R) 1.88 lb. hrome plated version of avlv90110 Type G floor valve. VLV90246 1.9 lb. 304SS version of avlv90110 Type Gfloor valve. VLV90227 1.9 lb. LOKING INLET VLVES Optional lock type covers can be furnished on all wall and floor inlet valves designed for use with 1 1 /2" diameter hose. Easy-Lift keyless floor valve. VLV90449 omplete valve (chrome body with aluminum cover/lid) LIV90036 luminum cover/lid only (replacement for existing valves) INLET VLVES FOR 2" DIMETER HOSE OR LRGER The 2" valve body is forged brass. The cover is steel and the entire valve is nickel plated. 2-1/2" and larger valve bodies are carbon steel. The covers are forged brass and the entire body is nickel plated. 2" male thread-exposed pipe. ccepts 2" male hose coupling. VLV90100 (8755-Type I) 1.25 lb. 3" male thread-exposed pipe. ccepts 3" male hose coupling. VLV90108 (8675-Type L) 4.25 lb. 2 1 /2" male thread-exposed pipe. ccepts 2 1 /2" male hose coupling. VLV90107 (8690-Type J) 2.75 lb. 4" male thread-exposed pipe. ccepts 4" male hose coupling. VLV90109 (8676-Type K) 6.25 lb. 5", 6" and 8" inlet valves are also available. The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com23
IR GTE VLVES Spencer ir Gate Valves may be used to regulate air flow or as a shut-off valve for branch lines in vacuum systems and low pressure exhaust systems. Diameter () Galvanized Part No. *Stainless Steel Part No. *luminum Part No. at. No. Length () Housing Width () Tubing L (D) Housing Length (E) djustment Slide (F) 2-1/8" VLV90125 VLV90251 VLV90258 G-2000 8-7/16 4 2-1/16 6 2-5/8 2-1/2" VLV90126 VLV90252 VLV90259 G-2500 8-7/16 4-1/2 2-1/4 6-3/4 3 3" VLV90127 VLV90253 VLV90260 G-3000 8-7/16 5-1/4 2-1/2 8 3-1/2 4" VLV90128 VLV90254 VLV90261 G-4000 10-7/16 6-1/4 3 10 4-1/2 5" VLV90224 VLV90255 VLV90262 G-5000 12-7/16 8 4 14-1/4 6-3/4 6" VLV90129 VLV90256 VLV90263 G-6000 12-5/8 10 5 18 8-13/16 8" VLV90219 VLV90257 VLV90264 G-8000 12-9/16 13 6 22 10-13/16 Dimensions in inches. Stock ir Gate Valves are galvanized steel with straight ends. *Stainless steel, aluminum, and valves with expanded ends are available as non-stock items. 24The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
LST GTES Spencer blast gates, also called butterfly valves, are effective flow regulating devices offered in 4" to 14" diameters. These blast gates are flanged, with NSI 125/150# drilling for convenient mounting with manual lever actuator. Part No. Size * D E F G H J K pprox. Wt. (lbs.) VLV90474 4" 4 4-1/2 8-3/8 5 9 6-3/16 7-1/2 10-3/4 8 3/4 40 VLV90475 6" 6 5-1/2 9-3/8 5 11 8-1/2 9-1/2 10-3/4 8 7/8 56 VLV90476 8" 8 7-3/4 11-5/8 5-1/2 13-1/2 10-5/8 11-3/4 10-3/4 8 7/8 77 VLV90477 10" 10 8-3/4 12-5/8 5-1/2 16 12-3/4 14-1/4 10-3/4 12 1 96 VLV90478 12" 12 9-3/4 13-5/8 5-1/2 19 15 17 10-3/4 12 1 125 VLV90479 14" 13-1/8 11-1/2 15-5/8 5-1/2 21 16-1/4 18-3/4 21 12 1-1/8 155 Dimensions are in inches. *ontact factory for larger sizes. Specifications Graphited Teflon braid packing is secured with adjustable brass packing nut; repacking can be done in place Graphited bronze bushing offers low friction, long life Ten position locking and infinite throttling lever with indicator plate Full-flanged, NSI 125/150# drilling accommodates dead end installation Maximum temperature rating 450 (232) ; maximum pressure rating 25 PSIG ontoured bore with swing-through seat lessens flow restriction Standard Materials of onstruction ody Ductile Iron Disc ast Iron L30 Shaft 416 Stainless Steel ushing Graphited ronze Packing Graphited Teflon raid Packing Nut rass The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com25
WFER UTTERFLY VLVES Wafer utterfly Valves are a flow regulating device similar to last Gates. They are used where weight is a consideration. Spencer Wafer utterfly Valves are metal-seated and made of an iron body and disc with an adjustable packing gland, 416 stainless steel shaft and a ten position locking lever with indicator plate. They are available in sizes 4" to 20" diameter. 4 LIGNMENT HOLES MTH 125-150 L FLNGE DRILLING 8-7/8 11 4 LIGNMENT HOLES MTH 125-150 L FLNGE DRILLING 1-1/2 21 3-3/4 Specifications: ast iron body and disc 416 stainless steel shaft ronze bushings rass packing nut Graphited Teflon packing Size () Part No. at. No. E DJUSTLE PKING NUT Valve L to ody End () D Valve L to Lever rm Exten. () E 6-1/4 45 45 D 3-1/4 Height (D) Outside Diamter (E) Weight lbs. 4 VLV90039 G-204 4-1/4 8-3/8 1-1/2 6-1/4 15 6 VLV90040 G-206 5-3/8 9-3/8 1-1/2 8-1/2 20 8 VLV90038 G-208 6-1/2 11-5/8 1-7/8 10-3/4 35 10 VLV90037 G-210 8 12-5/8 1-7/8 13 43 12 VLV90152 G-212 9-1/2 13-5/8 1-7/8 15-1/4 53 Nominal Size Size () Part No. at. No. Valve L to ody End () Valve L to Lever rm Exten. () Height (D) Outside Diameter (E) Weight lbs. 14 13-1/8 VLV90153 G-214 11-3/8 15-5/8 1-7/8 17-1/2 75 16 15-1/8 VLV90154 G-216 12-3/4 18 2-3/8 18-1/4 127 18 17-1/8 VLV90155 G-218 13-7/8 19 2-3/8 20-3/4 160 20 19-1/8 VLV90156 G-220 14-7/8 20 2-3/8 22-3/4 197 Dimensions in inches. FLNGE DPTERS Sizes 4" - 12" Illustration Sizes 14" - 20" Illustration Flange dapters are used where a full 125/150# thickness is not required. Used to join a blower, exhauster or fan to a tubing system Spencer standard Flange dapters are supplied with a tube neck. (May be furnished without a tube neck disregard "L" dimension and tube neck gauge.) lind flanges are also available. Size (J) Part No. at. No. Thickness Gauge (K) Length (L) Outside Diameter 3 F90033 03Q03 10 3 7-1/2 6 4 3/4 16 3 F90034 04Q03 10 3 9 7-1/2 8 3/4 16 4 F90020 04Q04 10 3 9 7-1/2 8 3/4 16 3 F90036 05Q03 10 3 10 8-1/2 8 7/8 16 4 F90037 05Q04 10 3 10 8-1/2 8 7/8 16 Dimensions in inches. olt ircle Number of olt Holes olt Hole Dia. Tube Neck Gauge 26The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
FLNGE DPTERS Size (J) Part No. at. No. Thickness Gauge (K) Length (L) Outside Diameter olt ircle Number of olt Holes 5 F90038 05Q05 10 3 10 8-1/2 8 7/8 14 3 F90039 06Q03 10 3 11 9-1/2 8 7/8 16 4 F90040 06Q04 10 3 11 9-1/2 8 7/8 16 5 F90041 06Q05 10 3 11 9-1/2 8 7/8 14 6 F90017 06Q06 10 3 11 9-1/2 8 7/8 14 5 F90043 08Q05 10 3 13-1/2 11-3/4 8 7/8 14 6 F90044 08Q06 10 3 13-1/2 11-3/4 8 7/8 14 8 F90019 08Q08 10 3 13-1/2 11-3/4 8 7/8 14 6 F90046 10Q06 10 3 16 14-1/4 12 1 14 8 F90047 10Q08 10 3 16 14-1/4 12 1 14 10 F90018 10Q10 10 3 16 14-1/4 12 1 12 6 F90049 12Q06 10 3 19 17 12 1 14 8 F90050 12Q08 10 3 19 17 12 1 14 10 F90051 12Q10 10 3 19 17 12 1 12 12 F90052 12Q12 10 3 19 17 12 1 12 8 F90053 14Q08 10 3 21 18-3/4 12 1-1/8 12 10 F90054 14Q10 10 3 21 18-3/4 12 1-1/8 12 12 F90055 14Q12 10 3 21 18-3/4 12 1-1/8 12 14 F90056 14Q14 10 6 21 18-3/4 12 1-1/8 12 8 F90057 16Q08 10 6 23-1/2 21-1/4 16 1-1/8 14 10 F90058 16Q10 10 6 23-1/2 21-1/4 16 1-1/8 12 12 F90059 16Q12 10 6 23-1/2 21-1/4 16 1-1/8 12 14 F90060 16Q14 10 6 23-1/2 21-1/4 16 1-1/8 12 16 F90061 16Q16 10 6 23-1/2 21-1/4 16 1-1/8 12 12 F90062 18Q12 10 6 25 22-3/4 16 1-1/4 12 14 F90063 18Q14 10 6 25 22-3/4 16 1-1/4 12 16 F90064 18Q16 10 6 25 22-3/4 16 1-1/4 12 18 F90065 18Q18 5/8 6 25 22-3/4 16 1-1/4 12 14 F90066 20Q14 5/8 6 27-1/2 25 20 1-1/4 12 16 F90067 20Q16 5/8 6 27-1/2 25 20 1-1/4 12 18 F90068 20Q18 5/8 6 27-1/2 25 20 1-1/4 12 20 F90069 20Q20 5/8 6 27-1/2 25 20 1-1/4 12 18 F90070 22Q18 5/8 6 27-1/2 25 20 1-1/4 12 20 F90071 22Q20 5/8 6 27-1/2 25 20 1-1/4 12 22 F90072 22Q22 5/8 6 27-1/2 25 20 1-1/4 12 20 F90073 24Q20 5/8 6 32 29-1/2 20 1-3/8⅜ 12 22 F90074 24Q22 5/8 6 32 29-1/2 20 1-3/8⅜ 12 24 F90075 24Q24 5/8 6 32 29-1/2 20 1-3/8⅜ 12 20 F90076 26Q20 5/8 6 32 29-1/2 20 1-3/8⅜ 12 22 F90077 26Q22 5/8 6 32 29-1/2 20 1-3/8⅜ 12 24 F90078 26Q24 5/8 6 32 29-1/2 20 1-3/8⅜ 12 26 F90079 26Q26 5/8 6 32 29-1/2 20 1-3/8⅜ 12 Dimensions in inches. olt Hole Dia. Tube Neck Gauge The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com27
OMPNION FLNGES Spencer centrifugal blowers and vacuum producers are furnished with inlets and outlets ranging from 4" to 42". To adapt the inlet and/or outlet to the system piping, companion flanges may be required. The following three types are available: Type Type Type Long Neck Steel Ring Threaded (FPT) Tube or Pipe Size Tube or Pipe Size Schedule 40 Sleeve onnections Weld onnections Pipe Type "" Part No. Type "" Part No. Type "" Part No. Diameter (J) Thickness (K) Length (L) Outside Diameter () olt ircle () Number of olt Holes olt Hole Diameter F90015 RF90006 FLG90004 4 1/2 *3 9 7-1/2 8 3/4 F90022 RF90012 FLG90003 4-1/2 1/2 3 9 7-1/2 8 3/4 RF90097 5 1/2 3 10 8-1/2 8 7/8 F90014 RF90007 FLG90005 6 1/2 **3 11 9-1/2 8 7/8 F90023 RF90013 FLG90002 6-5/8 1/2 3 11 9-1/2 8 7/8 F90016 RF90004 FLG90006 8 1/2 **3 13-1/2 11-3/4 8 7/8 F90024 RF90017 N/ 8-5/8 1/2 3 13-1/2 11-3/4 8 7/8 F90013 RF90008 FLG90007 10 1/2 ***3 16 14-1/4 12 1 F90025 RF90060 N/ 10-3/4 1/2 3 16 14-1/4 12 1 F90026 RF90005 N/ 12 1/2 3 19 17 12 1 F90027 RF90061 N/ 12-3/4 1/2 3 19 17 12 1 F90028 RF90000 N/ 14 5/8 6-1/8 21 18-3/4 12 1-1/8 F90029 RF90040 N/ 16 5/8 6-1/8 23-1/2 21-1/4 16 1-1/8 F90030 RF90041 N/ 18 5/8 6-1/8 25 22-3/4 16 1-1/4 F90031 RF90081 N/ 20 3/4 6-1/4 27-1/2 25 20 1-1/4 F90032 RF90063 N/ 24 3/4 6-1/4 32 29-1/2 20 1-3/8 NSI 125/150# drilling. Dimensions in inches. * (L) dimension is 1 5/8" for Type "" ** (L) dimension is 1 1/2" for Type "" *** (L) dimension is 1 3/4" for Type "" Other sizes available in Type "" and Type "" only. onsult factory for details. 28The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
HEK VLVES Size ID Size ID Part No. EPDM Part No. EPDM Wafer Style - 125# lass Part No. Silicone 2" VLV90484 VLV90497 1-3/8" 4-1/4" 1/2" 3" VLV90485 VLV90498 1-7/8" 6" 3/4" 4" VLV90486 VLV90499 2-3/8" 7-1/2" 7/8" 5" VLV90487 VLV90500 2-7/8" 9" 1-1/4" 6" VLV90488 VLV90501 3-3/8" 10-1/2" 1-1/2" 8" VLV90489 VLV90502 4-3/8" 13" 2" 10" VLV90490 VLV90503 5-3/8" 14-7/8" 2-5/8" 12" VLV90491 VLV90504 6-3/8" 17-1/2" 3" 14" VLV90492 VLV90505 7-3/8" 21" 3-3/8" 16" VLV90493 VLV90506 8-3/8" 23-1/2" 3-15/16" 18" VLV90494 VLV90507 9-3/8" 25" 4-1/2" 20" VLV90495 VLV90508 10-3/8" 27-1/2" 5-1/4" 24" VLV90496 VLV90509 12-3/8" 32" 6-1/4" Flanged Ends - 125# lass Part No. Silicone 1" VLV90510 VLV90527 3" 4-1/4" 1-1/4" VLV90511 VLV90528 4-1/2" 4-5/8" 1-1/2" VLV90512 VLV90529 4-1/2" 5" 2" VLV90513 VLV90530 4-1/2" 6" 2-1/2" VLV90514 VLV90531 5" 7" 3" VLV90515 VLV90532 5" 7-1/2" 4" VLV90516 VLV90533 5-1/2" 9" 5" VLV90517 VLV90534 6" 10" 6" VLV90518 VLV90535 7" 11" 8" VLV90519 VLV90536 9" 13-1/2" 10" VLV90520 VLV90537 11" 16" 12" VLV90521 VLV90538 13" 19" 14" VLV90522 VLV90539 15" 21" 16" VLV90523 VLV90540 17" 23-1/2" 18" VLV90524 VLV90541 19" 25" 20" VLV90525 VLV90542 21" 27-1/2" 24" VLV90526 VLV90543 25" 32" Standard Specs: ast Iron ody 6061 T6 luminum Internals 10" and above SS springs 200 psi@150 F EPDM Seals: -40 F to 300 F Silicone Seals: -100 F to 500 F Ref: TDS-156, TDS-157 Standard Specs: arbon Steel ody 6061 T6 luminum Internals 10" and above SS Springs 200 psi@150 F EPDM Seals: -40 F to 300 F Silicone Seals: -100 F to 500 F Ref: TDS-154, TDS-155 Size ID Male Pipe Thread Ends (MPT) Part No. Silicone 1" VLV90544 3-1/2" 1-5/16" 1-3/4" 1-1/4" VLV90545 3-1/2" 1-21/32" 2-1/16" 1-1/2" VLV90546 4" 1-29/32" 2-3/8" 2" VLV90547 4" 2-3/8" 2-13/16" 2-1/2" VLV90548 5" 2-7/8" 3-5/16" 3" VLV90549 5-1/2" 3-1/2" 4-1/8" 4" VLV90550 6" 4-1/2" 5-1/8" 5" VLV90551 7" 5-9/16" 6-3/16" 6" VLV90552 8" 6-5/8" 7-1/2" 8" VLV90553 10" 8-5/8" 9-1/2" 10" VLV90554 12" 10-3/4" 11-3/4" 12" VLV90555 14" 12-3/4" 14-1/4" Standard Specs: arbon Steel ody 6061 T6 luminum Internals 10" and above SS Springs 200 psi@150 F Silicone Seals: -100 F to 500 F Ref: TDS-153 The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com29
FRITION LOSS HRT This chart may be used to compute friction losses in a piping system. For example, determine the friction loss incurred with 70 FM flows through a 2" pipe, 50' long. Step 1: Intersect 70 FM and the sloping line for 2" pipe as shown. Step 2: Drop a vertical from this point of intersection and read the loss/100', in this case,.60hg/100'. Step 3: Multiply the loss/100' of line by the length of run/100'. The loss for 50', then, is.60 ( ) ( ) length of run =.60 50' = 0.30" Hg. 100' 100' lso: Velocity in the line may be read from the negatively sloping lines on the graph. Here, to get 70 FM through a 2" line, the air must travel at a velocity of approximately 3000 FPM. ubic Feet of ir Per Minute Friction Loss in Inches of Hg. Per 100 Ft. of Line With Inlet ir at 70 F. and 14.7 P.S.I.. 30The Spencer Turbine ompany, 600 Day Hill Road, Windsor, T US 06095 Tel (800) 232-4321 (860) 688-8361 Fax (860) 688-0098 www.spencerturbine.com
Spencer orporate Headquarters and Manufacturing Plant, Windsor, T US Products & Services Industrially rated products offering effective solutions for air and gas handling problems: Modular central vacuum systems Mobile or stationary integrated vacuum units Separators and dust collectors Multistage centrifugal blowers Single stage centrifugal blowers Gas boosters & hermetic gas boosters Regenerative blowers ustom-engineered products with special materials for extreme temperatures and pressures omplementary accessories with single source convenience and compatibility: Standard and custom electrical control panels UL, UL Listed and.e. ompliant available omprehensive selection of tubing, fittings, vacuum hoses, valves and tools Valves, gauges, couplings, shrink sleeves, vibration isolators and other system components omprehensive engineering and other customer support services: The industry s largest complement of technical specialists in air and gas handling technology Worldwide parts and service organization pplication research and testing facility Worldwide organization of sales representatives and distributors offering: Product selection, installation and operation assistance omprehensive system design services Follow-up services and troubleshooting For the name and telephone number of your local Spencer representative, call 800-232-4321 or email marketing@spencer-air.com Visa, Masterard and merican Express welcome lowers & Vacuum Systems with an Engineering Edge The Turbine ompany, 600 Day Hill Road, Windsor, T 06095 US TEL 800.232.4321 u 860.688.8361 u FX 860.688.0098 u www.spencerturbine.com ulletin No. 600Q.2 opyright 2014 The Spencer Turbine ompany 010214K