Industrial Relays Relays Relays Recommended application 10 A 8A 6A 5A 2A 100A peak 100A peak 300mA 50mA 10 ma 5mA 1mA Triac Solid-State & 1 2 1+1 C-0 CINT C10-T13 C10-T CINT CINT18 CINT15 C10-4 CINT21 CINT22 CINT28 CINT25 CINT51 CINT52 CINT53 C-1 CINT61 CINT62 CINT63 C-2 twin contacts CH
CINT1 CINT2 modules AC230VA -Solide-State Modules SPACE SAVING CINT-R2/ 24VU CINT/24V (+) NO (+) COIL OUT () COM COMAT CINT1/ 6-24VU Max. 6A 250V (see module) MADE IN EC NC MODULE LABEL 6-24 V MODULE LABEL 6-24 V (+) Solid-State module CINT-R5/CINT-R8 Relay module CINT-R1/CINT-R2 (0,2-2,5mm 2 ) CINT-, -, -15, -18 6,2 With cage clamp terminals (1x 0,2-2,5mm 2 ) CINT-21, -22, -25, -28 Complete with integrated LED and switching module. Test voltage: 3600V -20..+55/-40..+85 C CINT-, CINT-21 High power contact AgSnO2. With screw terminals (CINT-) (CINT-21). CINT-, CINT-22 Signal contact AgNi +5µAu. With screw terminals (CINT-) (CINT-22). CINT-15, CINT-25 DC solid-state switch NO, pnp. Integrated transient clamp circuit. For fast and high frequency switching. With screw terminals (CINT-15) or cage clamp terminals (CINT-25). CINT-18, CINT-28 AC solid-state switch type NO synchronous switching triac. For fast and high frequency switching. With screw terminals (CINT-18) or cage clamp terminals (CINT-28). 650VA 10 ma V 650VA 1mA 1V 24VD 1mA 6V 250VA 10 ma V Data at Tamb. =20 C (standard coil) 5 Switching cycles: mechanical/electrical Contact resistance/voltage drop Operation voltage AC DC Power consumption Pmax. 24V Power consumption Pmax. AC230V On delay/release time Parallel circuit AgSnO2 1500VA 300VA/230V 100A/2,5ms CINT-/...V CINT-21/...V AgNi + 5µAu 1500VA 10A/20ms CINT-/...V CINT-22/...V Solid-state...60W 20A/10ms /200mV 0,7...1,25Un <1ms All modules have an internal parallel diode circuit; green LED status indication. Solid-state (Triac) 500VA 20A/10ms <1,5V 0,7...1,25Un <1ms DC 10% CINT-15/DC24V CINT-25/DC24V CINT-18/DC24V CINT-28/DC24V Replacement Switching modules CINT-R1/0-240V CINT-R1/24V CINT-R2/0-240V CINT-R2/24V CINT-R5/DC24V CINT-R8/DC24V CINT-BR20 (supplied with standard delivery) CINT-BEZ Module d interface CINT-21/24V Accessories/Sparte parts CINT-BR20 (packing unit: 2x 10pin) 88,5 41,5 47.0 93,5 44,3 49,2 With cage clamp terminals CINT-BEZ (packing unit: 64 pieces) 6,2 3,4 73 6,2 3,4 73
CINT5 CINT6 s Relay module CINT-51/61 CINT-52/62 CINT-53/63 22 21 24 (0,5-2,5mm 2 ) CINT-51, -52, -53 With cage clamp terminals (1x 0,5-2,5mm 2 ) CINT-61, -62, -63 Complete with integrated LED and relay.ul. Test voltage: 3600V Isolation / // / : 4000Vrms // 2000Vrms -20..+55/-40..+85 C CINT-51, CINT-61 1 x CO high power contact AgSnO2. With screw terminals (CINT-51) (CINT-61). CINT-52, CINT-62 1x CO signal contact AgNi+5µAu. With screw terminals (CINT-52) or cage clamp terminals (CINT-62). CINT-53, CINT-63 1x CO signal contact AgNi for standard applications. With screw terminals (CINT-53) (CINT-63). 10 A (13A) 250VA 50mA 24V 8A 250VA 1mA V 8A 250VA 10mA 24V Data at Tamb. =20 C (standard coil) 5 Switching cycles: mechanical/electrical Contact resistance Operation voltage AC DC Power consumption Pmax. 24V Power consumption Pmax. AC230V On delay/release time Parallel circuit AgSnO2 2500VA...300W 300VA /230V 100A/5ms CINT-51/...V CINT-61/...V AgNi + 5µAu 2000VA 15A / 20ms CINT-52/...V CINT-62/...V Ag Ni 2000VA 15A/20ms All modules have an internal parallel diode circuit; green LED status indication. CINT-53 /...V CINT-63 /...V Replacement relay modules CINT-R21/0-240V CINT-R21/24V CINT-R22/0-240V CINT-R22/24V CINT-R23/0-240V CINT-R23/24V module CINT-51/24V 22 NC 21 COM 24 NO 48,5 CINT-BR8 22 NC 21 COM 24 NO 48 (supplied with standard delivery) CINT5-BEZ Accessories/Spare parts CINT-BR8/5 (packing unit: 1x 5pieces) S 220-240 VU 91 42,5 S 220-240 VU 93 45 With cage clamp terminals CINT5-BEZ /18 (packing unit: 1x 18pieces) 3,4 72 3,4 72
CH (+) 24V AC/DC () AUTO CH/ 24VU A3 CH 10 A 250VA 10 ma V AgCdO 2500VA 500VA/230V 100A 2,5ms 10 x10 6 0,8..1,2UN 1,1 UN (10A) 400mW/24V CH/24V Ag 300mA/30V 10 VA - 10 W 0,5A 10 3 84 45 62 AUT AUTO-- Relay FOR YOUR PLC 24V AC/DC 24V 300mA S 24V 300mA S B1 B2 (+) () AUTO A3 MADE IN EC- 10 A 250VA A3 Complet with hand switch and LED for AUTO position indication. Test voltage: 3000V -10..+50/-40..+85 C for control systems with 1x CO high power contact, 1x NO signal contact 300mA. Installation: 45mm front dimension. Front setting: AUTO-- for maintenance and emergency operation Data at Tamb. =20 C (standard coil) Power contact Signal contact Switching current/voltage 5 Mechanical switching cycles Contact resistance Operation voltage AC50/60Hz Operation voltage DC Power consumption Pmax (supplied with standard delivery) CHA-BEZ/10 module CH/24V CINT5-BEZ /18 (packing unit: 1x 18pieces) A3 26,5 17,5 4 58
! Kühn Controls AG Notes: You want more information about this product, please call us: tel: +49 (0)7082-940000 or send us a fax: +49 (0)7082-9400, or email: sales@kuehn-controls.de or visit our Website: www.kuehn-controls.de