The Rockefeller University I NFORMATION T ECHNOLOGY E DUCATION & T RAINING VPN Configuration Guide for PC/Mac/Linux
Table of Contents VPN Configuration Guide for PC/Mac/Linux... 1 Pulse Secure Client for Windows 7 and newer... 3 Download & Install the Pulse Secure Client... 3 Configuring the Pulse Secure Client... 3 Establish a VPN Connection... 3 Disconnect the Pulse Secure VPN Connection... 3 Network Connect Client for Windows Vista... 4 Download & Install the Network Connect Client... 4 Configuring the Network Connect Client... 4 Establish a VPN Connection... 5 Disconnect the Pulse Secure VPN Connection... 5 Pulse Secure Client for Mac OS X 10.8 and newer... 5 Download & Install the Pulse Secure Client... 6 Configuring the Pulse Secure Client... 6 Establish a VPN Connection... 6 Disconnect the Pulse Secure VPN Connection... 6 Network Connect Client for Mac OS X 10.6 and 10.7... 7 Download & Install the Network Connect Client... 7 Configuring the Pulse Secure Client... 7 Establish a VPN Connection... 8 Disconnect the Pulse Secure VPN Connection... 8 Pulse Secure Client for Linux Distributions... 9 Client Precheck... 9 Client Installation... 9 Establish a VPN Connection... 9 Disconnect the Pulse Secure VPN Connection... 10 Page 2 of 10
Pulse Secure Client for Windows 7 and newer Note: The program will auto start and be listed in the System Tray when the computer starts up. Download & Install the Pulse Secure Client 1. Download and save the client to your computer (IT recommends saving it to your Desktop) from IT s web site at http://it.rockefeller.edu/vpn 2. Double-click on the installer file to start the installation process 3. Follow the on-screen instructions to complete the installation Configuring the Pulse Secure Client 1. Launch the Pulse Secure client (the client can be found in the program directory or in the system tray ( ) 2. Click the + sign to add a new Connection and enter the following information: a. Type: select Policy Secure (UAC) or Connect Secure (VPN) b. Name: type in Rockefeller VPN c. Server URL: vpn.rockefeller.edu d. Click Add Establish a VPN Connection To establish a VPN connection using the Pulse Secure client for Windows: 1. Launch the Pulse Secure client (the client can be found in the program directory or in the system tray ( ) 2. Click Connect 3. Enter your RUNet username and RSA token passcode 4. Click Connect 5. Once connected, a Connected message will be displayed along with a green checkmark Disconnect the Pulse Secure VPN Connection 1. Open the Pulse Secure VPN client 2. Click Disconnect Page 3 of 10
Network Connect Client for Windows Vista Download & Install the Network Connect Client 1. Contact the IT Help Desk at x8940 or helpdesk@rockefeller.edu 2. The Help Desk will provide the installation file. Download and save the client to your computer (IT recommends saving it to your Desktop). 3. Double-click on the installer file to start the installation process 4. Follow the on-screen instructions to complete the installation Configuring the Network Connect Client 1. Launch the Network Connect client (the client is located in the All Programs > Pulse Secure > Network Connect) folder) 2. In the Sign in at: box, enter: vpn.rockefeller.edu and hit enter (the client may attempt to connect and prompt you for your log-in information. Refer to the Establish a VPN Connection on how to log-in. Page 4 of 10
Establish a VPN Connection To establish a VPN connection using the client for Mac: 1. Launch the Network Connect client (the client is located in the Applications folder). Users may create a shortcut and place it in the Dock or Desktop folder. 2. Enter your RUNet username and RSA token passcode 3. Click Sign in Disconnect the Pulse Secure VPN Connection 1. Open the Network Connect client 2. Click Sign Out Page 5 of 10
Pulse Secure Client for Mac OS X 10.8 and newer The program will auto start and be listed in the Menu bar when the computer starts up. Download & Install the Pulse Secure Client 1. Download and save the client to your computer (IT recommends saving it to your Desktop) from IT s web site at http://it.rockefeller.edu/vpn 2. Double-click on the install file to start the installation process 3. Follow the on-screen instructions to complete the installation Configuring the Pulse Secure Client 1. Launch the Pulse Secure client (the client can be found in the Applications folder or in the taskbar ( ) 2. Click the + sign to add a new Connection and enter the following information: a. Type: select Policy Secure (UAC) or Connect Secure (VPN) Only available on the latest VPN client available for Mac OS X 10.8 and newer. Mac users running the older VPN client for Mac OS X 10.7 or 10.6, proceed to step b b. Name: type in Rockefeller VPN c. Server URL: vpn.rockefeller.edu d. Click Add Establish a VPN Connection To establish a VPN connection using the Pulse Secure client for Mac: 1. Launch the Pulse Secure client (the client can be found in the Applications folder or in the taskbar ( ) 2. Click Connect 3. Enter your RUNet username and RSA token passcode 4. Click Connect 5. Once connected, a Connected message will be displayed along with a green checkmark Disconnect the Pulse Secure VPN Connection 1. Open the Pulse Secure VPN client 2. Click Disconnect Page 6 of 10
Network Connect Client for Mac OS X 10.6 and 10.7 Download & Install the Network Connect Client 1. Download and save the client to your computer (IT recommends saving it to your Desktop) from IT s web site at http://it.rockefeller.edu/vpn 2. Double-click on the install file to start the installation process 3. Follow the on-screen instructions to complete the installation Configuring the Pulse Secure Client 1. Launch the Network Connect client (the client is located in the Applications folder) 2. In the Sign in at: box, enter: vpn.rockefeller.edu and hit enter (the client may attempt to connect and prompt you for your log-in information. Refer to the Establish a VPN Connection on how to log-in. Page 7 of 10
Establish a VPN Connection To establish a VPN connection using the client for Mac: 1. Launch the Network Connect client. Users may create a shortcut and place it in the Desktop. 2. Enter your RUNet username and RSA token passcode 3. Click Sign in Disconnect the Pulse Secure VPN Connection 1. Open the Network Connect client 2. Click Sign Out Page 8 of 10
Pulse Secure Client for Linux Distributions The following instructions should work on most Linux distributions such as RedHat, Fedora and Ubuntu. Users who may need assistance, may contact the IT Help Desk. Client Precheck Check to see if OpenConnect is installed. 1. Open Terminal and as root type: openconnect --version # if version is > 7.05 then skip to Establish a VPN Connection section # if version is older please run the following command: apt-get remove openconnect Client Installation 1. If you run Debian please install pkg-config by entering the following command as root: aptget install pkg-config a. Install needed libraries (names are for Ubuntu, may be different for other Linux distributions). You will need vpnc-scripts, openssl developer, and XML2 developer libraries As root, enter: apt-get install vpnc-scripts libssl-dev libxml2-dev b. Download latest version of the openconnect source code from here: http://www.infradead.org/openconnect/download.html c. Unpack the source code by entering the following commands as root: a. tar xzvf openconnect-7.06.tar.gz b. cd openconnect c../configure --prefix= --with-vpnc-script=/usr/share/vpnc-scripts/vpnc-script --withoutgnutls d. make install 2. If you run RPM based Linux (RedHat, Fedora, SUSE), run the following command as root: yum install vpnc-script openssl-devel libxml2-devel a. Download latest version of the openconnect source code from here: http://www.infradead.org/openconnect/download.html b. Unpack the source code by entering the following commands as root: a. tar xzvf openconnect-7.06.tar.gz b. cd openconnect c../configure --prefix= --with-vpnc-script=/usr/share/vpnc-scripts/vpnc-script --withoutgnutls d. make install Establish a VPN Connection To establish a VPN connection, use the sudo command to run the following command. openconnect --juniper --user={runet username} vpn.rockefeller.edu Page 9 of 10
Disconnect the Pulse Secure VPN Connection To disconnect terminate the VPN connection, close the root shell window or hold down ctrl+c on your keyboard in the root shell Page 10 of 10