032012 MAGNETIC DRIVE PUMPS APPLICATIONS : surface treatment, transfer, pumping of chemicals water treatment paper industry agriculture agribusiness cosmetics industry salt water metallurgy France SIEEC SAS 9 rue des platanes ZAC Vence Ecoparc 38120 SAINT-ÉGRÈVE Tél. : 33 (0)4 76 26 12 09 Fax : 33 (0)4 76 27 04 82 England SIEEC UK Ltd Unit 3 - ST.Alban's usinesspark ST. ALAN'S RD STAFFORD - ST16 3DR Ph. : +44 (0)1 785 227 700 Fax : +44 (0)1 785 246 006
M200 M70 M50 Features Pump body made of injected plastic (Polypropylene or PVDF) Closed centrifugal pump impeller with diffusi on part Impeller driven by high capacity magnetic coupler Ceramic / ceramic impeller bearing oversized with ceramic / PTFE stop Advantages Excellent resistance to acids and bases Max. fluid temperature = 80 C (PP), 110 C (PVDF) Very good efficiency Max. flow rate up to 40 m 3 /h Max. manometric head up to 23 m No gaskets, no risks of leaks Compatible with fluids of S.G. 1.2 to 1.5 or 2 (spec. mod.) Very long lifetime (running dry prohibited) Integrated electric motor Reduced dimensions Automatic repriming Suction head up to 2 m
M35 - M50 - M70 magnetic coupled motor-pumps Self repriming 230 V single-phase motor or 230/400 V three-phase motor - 50 Hz or 60 Hz upon request - 3,000 rpm Standard inlet/outlet with grooved nozzles. Optional union nuts or flange fittings For PVDF versions possibility of EPDM gaskets upon request Technical features - Motor power 0.18 kw 1 phase or 3 phase motor DIMENSIONS - Max. output 3 m³/h - Max. head 10 m - Max. fluid temperature PP body 80 C PVDF body 110 C - Gaskets EPDM - FPM FPM M35 Pump - S.G. < 1.4 CURVES Technical features - Motor power 0.18 kw 1 phase or 3 phase motor DIMENSIONS - Max. output 5 m³/h - Max. head 10 m - Max. fluid temperature PP body 80 C PVDF body 110 C - Gaskets EPDM - FPM FPM M50 Pump - S.G. < 1.2 CURVES Technical features - Motor power 0.25 kw 3 phase motor DIMENSIONS - Max. output 7 m³/h - Max. head 9,5 m - Max. fluid temperature PP body 80 C PVDF body 110 C - Gaskets EPDM - FPM FPM M70 Pump - S.G. < 1.2 CURVES
M100 - M140 - M200 magnetic coupled motor-pumps Self-repriming 230/400 V three-phase motor - 50 Hz or 60 Hz upon request - 3,000 rpm Serial-mounted strainer built into the volute case Standard inlet/outlet with grooved nozzles. Optional union nuts or flange fittings For PVDF versions possibility of EPDM gaskets upon request Special models M100 and M140 PVDF for liquids to 2.0 S.G. Technical features - Motor power 0.75 kw DIMENSIONS - Max. output 10 m³/h - Max. head 18 m - Max. fluid temperature PP body 80 C PVDF body 110 C - Gaskets EPDM - FPM FPM M100 Pump - S.G. < 1.5 <1.5 (=2 spec. mod.) CURVES Technical features - Motor power 1.1 kw DIMENSIONS - Max. output 14 m³/h - Max. head 19 m - Max. fluid temperature PP body 80 C PVDF body 110 C - Gaskets EPDM - FPM FPM M140 Pump - S.G. < 1.5 <1.5 (=2 spec. mod.) CURVES Technical features - Motor power 1.1 kw DIMENSIONS - Max. output 20 m³/h - Max. head 19 m - Max. fluid temperature PP body 80 C PVDF body 110 C - Gaskets EPDM - FPM FPM M200 Pump - S.G. < 1.3 CURVES
M35 - M50 - M70 Pumps NPSH (m) 10 8 6 4 2 M35 M50 M70 yield% 50 45 40 35 30 25 20 15 10 5 M35 M50 M70 1 2 3 4 5 6 7 Output (m 3 /h) 1 2 3 4 5 6 7 Output (m 3 /h) Manometric head (m) 12 10 8 advised operating range 6 4 2 M35 M50 M70 1 2 3 4 5 6 7 Output (m3 /h)
M100 - M140 - M200 Pumps NPSH (m) 9 8 7 6 M100 M140 M200 yield% 50 45 40 35 5 30 4 3 2 1 25 20 15 10 5 M140 M100 M200 2 4 6 8 10 12 14 16 18 20 2 4 6 8 10 12 14 16 18 20 22 Output (m 3 /h) Output (m 3 /h) Manometric head (m) 22 20 18 16 14 12 10 8 6 advised operating range 4 2 M100 M140 M200 2 4 6 8 10 12 14 16 18 20 Output (m 3 /h)
M35 - M50 Pumps 80 153 63 155 53 147,5 344,5 136 7 107 Ø7 100
M35 - M50 Pumps connections ØA nx ØD D D ØC ØC ØA ØC ØA Model Grooved nozzle Union nut Flange ØA - ØC (DN) - D ØC - ØA - nxød - M35 Inlet Outlet Ø20-35 G1"1/4 - DN20-31,5 Ø100 - Ø75-4xØ14-31,5 M50 Inlet Outlet Ø25-35 G1"1/2 - DN25-31,5 Ø115 - Ø85-4xØ14-31,5
M70 Pump 63 155 G 2" 77 149 80 421.5 177 107 153 Ø7 100
M70 Pump connections ØA ØC D ØA D Grooved nozzle ØA ØC nxød Union nut Flange Model Grooved nozzle Union nut Flange ØA - ØC (DN) - D ØA - ØC - nxød - M70 Inlet Ø40-60 G 2" - DN32-54 Ø140 - Ø100-4x18-55 Outlet Ø32-35 G 1" 1/2 - DN25-30 Ø115 - Ø85-4x14-30
M100 - M140 - M200 Pumps 68 212 100 461 137 80 209 Ø10 177 9.5 195 125
M100 to M200 Pumps connections Ø A Ø C Ø C Ø A Ø D D Models Grooved nozzle Union nut Flange ØA - ØC (DN) - D ØC - ØA - nxød - M100 - M140 Inlet Outlet 40-47 G2"1/4 - DN40-60 150-110 - 4x18-60 M200 Inlet Outlet 50-55 G2"3/4 - DN50-60 165-125 - 4x18-60