Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 14 INTERFACE RELAYS XT 14 W INTERFACE PLUG-IN RELAYS XT 1 pole 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts DC- or AC coil, sensitive coil 400mW Reinforced insulation, protection class II (VDE 0700) 4 kv / 8 mm coil-contact Manual test tab, optionally lockable1) Version with mechanical and/or electrical indicator optionally available Suitable for use in Tyco standard RT sockets Recyclable packaging RoHS compliant (Directive 2002/95/EC) For usage in panel boards, mechanical engineering REG.-No. B758 s0538_a W PCB LAYOUT / TERMINAL ASSIGNMENT W EMPLOYMENT 1 CO contact 16 A S0163-BE 2 NO contacts 8 A S0163-BJ s0538_bb 1) Locking function description If the test button is pulled out too forcefully, it may bypass the momentary testing position and go straight into the locked position. Delivery status is with testing possibility only, to reach locking position please remove the locking plastic pip according drawing.
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 13 w PRODUCT KEY Product key Type Version 4 8 A, pinning 5 mm, flux proof 2 2 CO contacts 4 2 NO contacts 3 AgSnO2 4 AgNi 90/10 5 AgNi 90/10 gold plated Coil Coil code: please refer to coil versions table R T 4 13 w TECHNICAL DATA TECHNICAL DATA 8 A 2 CO or 2 NO contacts Contact set single contact Rated current 8 A Rated voltage / maximum switching voltage AC AC 250 V / 440 V Max. breaking capacity 2000 VA Limiting making capacity, max. 4 s, df 10% 15 A AgNi 90/10, AgNi 90/10 htv COIL DATA Rated voltage DC-coil 5...110 V AC-coil 24...230 V Rated power DC-coil 400 mw AC-coil 0,75 VA Operate / release voltage, coil resistance 24 VDC-coil 16,8 V / 2,4 V / 1440 Ω ± 10% at 23 C ambient temperature 230 VAC-coil 172,5 V / 34,5 V / 32500 Ω ± 10% Further technical data on www.schrack.at CONTACTS PINNING COIL CONTACT MATERIAL TYPE AVAILABLE STORE ORDER NO. 2 CO, 8A 5 mm 6V DC AgNi 90/10 PREL-SL-2-UKE-M1-006G-08-5,0 RT424006 2 CO, 8A 5 mm 12V DC AgNi 90/10 PREL-SL-2-UKE-M1-012G-08-5,0 RT424012 2 CO, 8A 5 mm 24V DC AgNi 90/10 PREL-SL-2-UKE-M1-024G-08-5,0 RT424024 2 CO, 8A 5 mm 24V DC AgNi 90/10, gp PREL-SL-2-UKE-M1-024G-08-5,0 RT425024 2 CO, 8A 5 mm 48V DC AgNi 90/10 PREL-SL-2-UKE-M1-048G-08-5,0 RT424048 2 CO, 8A 5 mm 110V DC AgNi 90/10 PREL-SL-2-UKE-M1-110G-08-5,0 RT424110 2 CO, 8A 5 mm 24V AC AgNi 90/10 PREL-SL-2-UKE-M1-024W-08-5,0 RT424524 2 CO, 8A 5 mm 48V AC AgNi 90/10 PREL-SL-2-UKE-M1-048W-08-5,0 RT424548 2 CO, 8A 5 mm 115V AC AgNi 90/10 PREL-SL-2-UKE-M1-115W-08-5,0 RT424615 2 CO, 8A 5 mm 230V AC AgNi 90/10 PREL-SL-2-UKE-M1-230W-08-5,0 RT424730 / Order No. blue: Stored goods, usually ready for delivery on day of order! Additional opportunity to pick up goods at every Schrack store!
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 12 12 W 2 2 pole 8 A, 2 CO or 2 NO contacts DC- or AC-coil Sensitive coil 400mW Reinforced insulation 5 kv / 10 mm coil-contact, protection class II (VDE 0700) Reliable disconnection according to VDE 0160 in connection with socket YRT78626 Module height only 15.7 mm PCB and screw socket available For usage in domestic appliances, heating systems, emergency lighting, modems V REG.-Nr. 6106 b 14385 B C0786 S0272-AB W PCB LAYOUT / TERMINAL ASSIGNMENT 2 CO contacts S0418-CA *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 2 NO contacts
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 11 w PRODUCT KEY TYPENSCHLÜSSEL Typenschlüssel R T 3 Type Bauart Version S without ohne Prüfhebel test lab T mit TPrüfhebel with test (Handbetätigung) lab (manual operator) nur mit for Kontaktwerkstoff contact material T T und and bistabiler bistable coil Spule only Kontaktausführung 3 11 NO Schließer contact (1 form A) Kontaktwerkstoff L AgSnO AgSnO2 2 T Wolfram-Vorlaufkontakt T Tungsten (W) pre-make + AgSnO2 + AgSnO 2 Spule Coil Coil Spulencode code: please siehe refer Tabelle to coil Spulenausführungen versions table 11 w TECHNICAL DATA CONTACT DATA RT.3T RTS3L Contact set single contact Type of interruption micro disconnection Rated current 16 A Rated voltage / maximum switching voltage AC 250/400 VAC Limiting continuous current 16 A Max. breaking capacity 4000 VA Limiting making capacity, max. 4 s, df 10% max 20 ms (incandescent lamps) 165 A 120 A max 200 µs (florescent lamps) 800 A - W pre-make contact+agsno2 AgSnO2 COIL DATA, MONOSTABLE Rated coil voltage range 5...110 VDC Rated power typ 400 mw Operative range to IEC 61810 2 Coil insulation system according UL 1446 class F Operate / release voltage, coil resistance 24 VDC-coil 16,8 V / 2,4 V / 1440 Ω ± 10% at 23 C ambient temperature 230 VAC-coil 172,5 V / 34,5 V / 32500 Ω ± 10% Further technical data on www.schrack.at CONTACTS PINNING COIL CONTACT MATERIAL TYPE AVAILABLE STORE ORDER NO. 1 NO, 16A 5 mm 24V DC AgSnO2 PREL-SL-1-AKE-M1-024G-16-5 RTS3L024 1 NO, 16A 5 mm 24V DC W + AgSnO2 PREL-SL-1-AKE-M1-024G-16-5 RTS3T024 / Order No. blue: Stored goods, usually ready for delivery on day of order!
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 10 10 W I HIGH INRUSH 1 pole 16 A, (W pre-make contact + AgSnO2) 10 A / 250 VAC making and breaking capacity acc. to IEC 60669-1 165 A / 20 ms inrush peak current Mono- or bistable coil 5 kv / 10 mm coil-contact Reinforced insulation Test tab (manual operator) optional RoHS compliant (Directive 2002/95/EC) For usage in illumination control systems, motion detectors, motors S0491-B V REG.-Nr. 6106 b 14385 W PCB LAYOUT / TERMINAL ASSIGNMENT 16 A, pinning 5 mm 1 CO contact S04 *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. + +
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 9 w PRODUCT KEY Type Version 3 16A, pinning 5 mm, flux proof D 16 A, Pinning 5 mm, waschdicht 1 1 CO contact (1 form C) 3 (1 form A) K AgNi 90/10 L AgSnO 2 Coil Coil code: please refer to coil versions table, preferred types in bold print 9 w TECHNICAL DATA CONTACT DATA Contact set single contact Rated current 16 A Rated voltage / maximum switching voltage AC AC 250 V / 440 V Max. breaking capacity 4000 VA Limiting making capacity, max. 4 s, df 10% 30 A AgNi 90/10, AgSnO2 COIL DATA Rated voltage 5...110 V Rated power 400 mw Operate / release voltage, coil resistance 24 VDC-coil 16,8 V / 2,4 V / 1440 Ω ± 10% at 23 C ambient temperature Further technical data on www.schrack.at CONTACTS PINNING COIL CONTACT MATERIAL TYPE AVAILABLE STORE ORDER NO. 1 NO, 16A 5 mm 12V DC AgNi 90/10 PREL-SL-1-AKE-M1-012G-16-5,0 RT33K012 1 NO, 16A 5 mm 24V DC AgNi 90/10 PREL-SL-1-AKE-M1-024G-16-5,0 RT33K024 / Order No. blue: Stored goods, usually ready for delivery on day of order!
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 8 8 W 1 INRUSH 1 pole 16 A,, For inrush peak currents up to 80 A DC- or AC-coil Sensitive coil 400mW 5 kv / 10 mm coil-contact, reinforced insulation Protection class II Ambient temperature 85 C (DC-coil) Module height only 15.7 mm PCB and screwed socket available For usage in domestic appliances, heating and illumination control systems V REG.-Nr. 6106 b 14385 S0272-AB W PCB LAYOUT / TERMINAL ASSIGNMENT 16 A,, pinning 5 mm monostable version S0418-CU *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. + +
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 7 w PRODUCT KEY Product key R T Type Version 1 1-pole, 12 A, 12A, pinning pinning 3.5 mm, 3,5 mm flux proof 23 1-pole, 16 A, 12A, pinning pinning 5 mm, 5 mm flux proof 3 1-pole, 16A, pinning 5 mm 4 2-pole, 8A, pinning 5 mm 1 1 1 CO CO contact (1 form C) 32 21 CO NO contacts (2 form C) 4 AgNi AgNi 90/10 5 AgNi 90/10 gold plated (for type RT31.) Coil Coil code: please refer refer to to coil coil versions versions table, table preferred types in bold print 7 w TECHNICAL DATA CONTACT DATA 12 A 16 A 1 CO or Contact set single contact Rated current 12 A 16 A Rated voltage / maximum switching voltage AC AC 250 V / 440 V Max. breaking capacity 3000 VA 4000 VA Limiting making capacity, max. 4 s, df 10% 25 A 30 A AgNi 90/10, AgNi 90/10 htv COIL DATA Rated voltage DC-coil 5...110 V AC-coil 24...230 V Rated power DC-coil 400 mw AC-coil 0,75 VA Operate / release voltage, coil resistance 24 VDC-coil 16,8 V / 2,4 V / 1440 Ω ± 10% at 23 C ambient temperature 230 VAC-coil 172,5 V / 34,5 V / 32500 Ω ± 10% Further technical data on www.schrack.at CONTACTS PINNING COIL CONTACT MATERIAL TYPE AVAILABLE STORE ORDER NO. 1 CO, 12A 3,5 mm 12V DC AgNi 90/10 PREL-SL-1-UKE-M1-012G-12-3,5 RT114012 1 CO, 12A 3,5 mm 24V DC AgNi 90/10 PREL-SL-1-UKE-M1-024G-12-3,5 RT114024 1 CO, 12A 3,5 mm 24V AC AgNi 90/10 PREL-SL-1-UKE-M1-024W-12-3,5 RT114524 1 CO, 12A 5 mm 12V DC AgNi 90/10 PREL-SL-1-UKE-M1-012G-12-5,0 RT214012 1 CO, 12A 5 mm 24V DC AgNi 90/10 PREL-SL-1-UKE-M1-024G-12-5,0 RT214024 1 CO, 12A 5 mm 230V AC AgNi 90/10 PREL-SL-1-UKE-M1-230W-12-5,0 RT214730 1 CO, 16A 5 mm 5V DC AgNi 90/10 PREL-SL-1-UKE-M1-005G-16-5,0 RT314005 1 CO, 16A 5 mm 6V DC AgNi 90/10 PREL-SL-1-UKE-M1-006G-16-5,0 RT314006 1 CO, 16A 5 mm 12V DC AgNi 90/10 PREL-SL-1-UKE-M1-012G-16-5,0 RT314012 1 CO, 16A 5 mm 24V DC AgNi 90/10 PREL-SL-1-UKE-M1-024G-16-5,0 RT314024 1 NO, 16A 5 mm 24V DC AgNi 90/10 PREL-SL-1-AKE-M1-024G-16-5,0 RT334024 1 CO, 16A 5 mm 48V DC AgNi 90/10 PREL-SL-1-UKE-M1-048G-16-5,0 RT314048 1 CO, 16A 5 mm 110V DC AgNi 90/10 PREL-SL-1-UKE-M1-110G-16-5,0 RT314110 1 CO, 16A 5 mm 24V AC AgNi 90/10 PREL-SL-1-UKE-M1-024W-16-5,0 RT314524 1 CO, 16A 5 mm 230V AC AgNi 90/10 PREL-SL-1-UKE-M1-230W-16-5,0 RT314730 1 CO, 16A 5 mm 24V DC AgNi 90/10 PREL-SL-1-UKE-M1-024G-16-5,0 RT315024 1 CO, 16A 5 mm 230V AC AgNi 90/10 PREL-SL-1-UKE-M1-230W-16-5,0 RT315730 1 CO, 16A 5 mm 24V DC AgNi 90/10 PREL-SW-1-UKE-M1-024G-16-5,0 RTD14024 / Order No. blue: Stored goods, usually ready for delivery on day of order! Additional opportunity to pick up goods at every Schrack store!
Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 6 6 W 1 1 pole 12 / 16 A, DC- or AC coil 1 CO contact or Sensitive coil 400mW / 0.75 VA 5 kv / 10 mm coil-contact, protection class II (VDE 0700) Reliable disconnection according to VDE 0160 in connection with socket YRT78626 Ambient temperature 85 C (DC-coil) Module height only 15.7 mm Gold plated contacts available PCB and screwed socket available For usage in boiler and garage door control systems, time relays, vending machines, interface modules V REG.-Nr. 6106 b 14385 B C0786 S0272-AB W PCB LAYOUT / TERMINAL ASSIGNMENT 12 A, pinning 3.5 mm 12 A, pinning 5 mm 16 A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 CO contact 1 CO contact 1 CO contact S0163-BG S0163-BC S0163-BE S0163-BH S0163-BD S0163-BF