1 General-purpose Relays MK-S New Model General-purpose Relays Featuring Mechanical Indicator and Lockable Test Button Built-in operation indicator (mechanical and LED), and new models with lockable test button. Nameplate provided on models with lockable test button. RoHS Compliant. UL approval for most models. (UL approval pending for models with built-in LED indicators.) Features Two-way Action Test Button Relay in Normal Operation For Momentary Operation For Lock Operation Yellow button Pull down the test button to the first position, then press the yellow button with an insulated tool to operate the contact. Pull down the test button to the second position. (The contact is now in the locked position.) Model Number Structure Model Number Legend 1 1. Contact Form : DPDT : PDT. Terminals P: Plug-in. Mechanical Indicator/Test Button Blank: Mechanical indicator I: Mechanical indicator and lockable test button. LED Indicator Blank: Standard N: LED indicator. Coil Polarity Blank: Standard 1: Reverse polarity (DC coil only). Surge Absorption Blank: Standard D: Surge absorber diode (DC coil only) V: Surge absorber varistor (AC coil only). Internal Connections Blank: Standard or : Non-standard connections (Refer to Terminal Arrangement/Internal Connection.). Rated Voltage (Refer to Coil Ratings.) General-purpose Relays MK-S New Model 1
2 Ordering Information List of Models Type Standard Models LED Indicator (See note.) Diode (See note.) LED Indicator and Diode Varistor LED Indicator and Varistor Terminals Contact form Internal connections (See note.) List of Models (Order Separately) With mechanical indicator With mechanical indicator and lockable test button Coil ratings Plug-in DPDT Standard MKSP MKSPI AC/DC Non-standard MKSP- MKSPI- PDT Standard MKSP MKSPI Non-Standard MKSP- MKSPI- MKSP- MKSPI- DPDT Standard MKSPN(1) MKSPIN(1) AC/DC Non-standard MKSPN(1)- MKSPIN(1)- PDT Standard MKSPN(1) MKSPIN(1) Non-Standard MKSPN(1)- MKSPIN(1)- MKSPN(1)- MKSPIN(1)- DPDT Standard MKSP(1)-D MKSPI(1)-D DC Non-standard MKSP(1)-D- MKSPI(1)-D- PDT Standard MKSP(1)-D MKSPI(1)-D Non-Standard MKSP(1)-D- MKSPI(1)-D- MKSP(1)-D- MKSPI(1)-D- DPDT Standard MKSPN-D MKSPIN-D DC Non-standard MKSPN-D- MKSPIN-D- PDT Standard MKSPN-D MKSPIN-D Non-Standard MKSPN-D- MKSPIN-D- MKSPN-D- MKSPIN-D- DPDT Standard MKSP-V MKSPI-V AC Non-standard MKSP-V- MKSPI-V- PDT Standard MKSP-V MKSPI-V Non-Standard MKSP-V- MKSPI-V- MKSP-V- MKSPI-V- DPDT Standard MKSPN-V MKSPIN-V AC Non-standard MKSPN-V- MKSPIN-V- PDT Standard MKSPN-V MKSPIN-V Non-Standard MKSPN-V- MKSPIN-V- MKSPN-V- MKSPIN-V- Note: 1. When ordering, add the rated voltage to the model number. Rated voltages are given in the coil ratings table in the specifications. Example: MKSP VDC Rated voltage. The DC coil comes in two types: standard coil polarity and reverse coil polarity. Refer to Terminal Arrangement and Internal Connections. Example: MKSPIN1- VDC Reverse coil polarity. Refer to Terminal Arrangement and Internal Connections for non-standard internal connections. Item Type Model Track-mounted Socket -pin PF0A-E 11-pin PF11A-E -pin PF0A-D 11-pin PF11A-D Hold-down Clip (For PF0A-E and PF11A-E) PFC-A1 General-purpose Relays MK-S New Model
3 Specifications Ratings Coil Ratings Rated voltage Rated current Coil resistance Must operate Must release 0 Hz 0 Hz voltage voltage AC V ma ma.1 Ω 0% max. of rated 0% min. of rated 1 V 1 ma 1 ma 1. Ω voltage voltage at 0 Hz V 110 ma. ma. Ω % min. of rated voltage at 0 Hz 100 V. ma.1 ma 0 Ω 110 V. ma 1.0 ma Ω 00 V 1. ma 11. ma,10 Ω 0 V 1.1 ma 10. ma,0 Ω 0 V 10.0 ma 11. ma,0 Ω 0 V 11.0 ma. ma,0 Ω DC V ma. Ω 1% min. of rated 1 V 11 ma 10 Ω voltage V. ma 0 Ω V.1 ma 1,10 Ω 100 V 1. ma,0 Ω 110 V 1. ma,0 Ω Note: 1. The rated current and coil resistance are measured at a coil temperature of C with tolerances of +1%/ 0% for AC rated current and ±1% for DC coil resistance.. Performance characteristic data are measured at a coil temperature of C.. The maximum voltage is one that is applicable instantaneously to the Relay coil at C and not continuously.. For DC-operated Relays with the LED indicator built-in, add an LED current of approx. ma to the rated current. Contact Ratings Max. voltage 110% of rated voltage Power consumption Approx.. VA at 0 Hz Approx.. VA at 0 Hz Approx. 1. W Load Resistive load (cosφ = 1) Contact mechanism Single Contact material AgSnIn Rated load NO 10 A, 0 VAC 10A, 0 VDC NC A, 0 VAC A, 0 VDC Rated carry current 10 A Max. switching voltage 0 VAC, 0 VDC Max. switching current 10 A Max. switching power NO,00 VA/00 W NC 1,0 VA/10 W Inductive load (cosφ = 0.) A, 0 VAC General-purpose Relays MK-S New Model
4 Characteristics Contact resistance Operate time Release time Max. operating frequency Insulation resistance Dielectric strength Insulation method Impulse withstand voltage Note: 1. The values given above are initial values.. P level: λ0 = /operation. Ambient temperature of models with LED indicator is to 0 C. Approved Standards UL0 (File No. E11) CSA Standard: CSA Certification by : CSA C. No. 1 Note: Applications have been submitted for UL and CSA certification for models with built-in LED indicators. Engineering Data Reference Data 100 mω max. AC: 0 ms max. DC: 0 ms max. 0 ms max.(0 ms max. for built-in Diode Relays) Mechanical: 1,000 operations/h Electrical: 1,00 operations/h (under rated load) 100 MΩ min. (at 00 VDC),00 VAC 0/0 Hz for 1 min between coil and contacts 1,000 VAC 0/0 Hz for 1 min between contacts of same polarity and terminals of the same polarity,00 VAC 0/0 Hz for 1 min between current-carrying parts, non-current-carrying parts, and opposite polarity Basic insulation. kv between coil and contacts (with 1. 0 µs impulse wave).0 kv between contacts of different polarity (with 1. 0 µs impulse wave) Pollution degree Rated insulation voltage 0 V Vibration resistance Destruction: 10 to to 10 Hz, 0.-mm single amplitude (1.-mm double amplitude) Malfunction: 10 to to 10 Hz, 0.-mm single amplitude (1.0-mm double amplitude) Shock resistance Destruction: 1,000 m/s (approx. 100 G) Malfunction: 100 m/s (approx. 10 G) Endurance Mechanical:,000,000 operations min. (at 1,000 operations/h under rated load) Electrical: 100,000 operations h. (at 1,00 operations/h under rated load) Failure rate P level (reference value) 10 ma at 1 VDC Ambient temperature Operating: 0 to 0 C (with no icing or condensation) Ambient humidity Operating: % to % Weight Approx. 0 g Coil ratings Contact ratings Operations to 110 VDC N.O. 10 A, 0 V AC 0/0 Hz (Resistive),000 to 0 VAC contact 10 A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) N.C. A, 0 V AC 0/0 Hz (Resistive),000 contact A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) Maximum Switching Power IEC Standard/TUV Certification: IEC110-1 (Certification No. R010) Coil ratings Contact ratings Operations, 1,,, 100, 110 VDC, 1,, 100, 110, 00, 0, 0 VAC N.O. 10 A, 0 V AC 0/0 Hz (Resistive) 100,000 contact 10 A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) N.C. A, 0 V AC 0/0 Hz (Resistive) 100,000 contact A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) Note: When Relays are mounted on the PF0A-E or PF11A-E, the maximum carrying current is A. Rated Carry Current vs. Ambient Rated Temperature Switching current (A) DC resistive load with NO contact AC resistive load with NO contact Rated carry current (A) 10 UL derating curve 10 DC resistive load with NC contact AC resistive load with NC contact AC inductive load (cosφ = 0.) Switching voltage (V) Ambient temperature ( C) Note: The lower limit of the ambient operating temperature for models with built-in operation indicators is C. General-purpose Relays MK-S New Model
5 Dimensions Note: All units are in millimeters unless otherwise indicated. out Test Button Lockable Test Button. max.. max.. max. 0.. max.. max. 0.. max. Sockets See below for Socket dimensions. Socket Surface-mounting Socket (for track or screw mounting) Finger-protection models --- Maximum carry current 10 A A poles PF0A-E PF0A-D PF0A poles PF11A-E PF11A-E-D PF11A Note: Use the Surface-mounting Sockets (i.e., finger-protection models) with "-E" at the end of the model number. When using the PF0A and PF11A, be sure not to exceed the Socket's maximum carry current of A. Using at a current exceeding A may lead to burning. Round terminals cannot be used for finger-protection models. Use Y-shaped terminals. PF0A-E (Conforming to EN 00) Terminal Arrangement Eight, M. sems PF11A-E (Conforming to EN 00) Eleven, M. sems Terminal Arrangement max.. max.. 1 max.. 1 max. Mounting Holes Two, M or two.-dia. holes. max.. 1 max. Mounting Holes Two, M or two.-dia. holes ±0. ±0. General-purpose Relays MK-S New Model
6 PF0A-D PF11A-D. Terminal Arrangement 1 1. Terminal Arrangement 1 1 Eight, M screws A A1 Eight, M screws 10 A 11 1 A1 1 Mounting Holes Two, M or two.-dia. hole Mounting Holes Two, M or two.-dia. hole 0 0 Hold-down Clips PFC-A1 ( pieces per set). 0.. Mounting Tracks PFP-100N, PFP-0N (Conforming to EN 00) PFP-100N (Conforming to EN 00)..±0.1 ±0. ±0.1. ± * (00)* ± 1 1. * This dimension applies to the PFP-0N Mounting Track. * A total of twelve. elliptic holes is provided with six holes cut from each track end at a pitch of 10 mm. Mounting Height with Sockets Surface-mounting Sockets. (See note.) Two poles.. (See note.) Three poles. PF0A(-E) PF11A(-E) Note: PF0A(-E) and PF11A(-E) allow either track or screw mounting. General-purpose Relays MK-S New Model
7 Terminal Arrangement/Internal Connection (Bottom View) Standard Models (AC/DC Coil) MKSP(I) MKSP(I)- MKSP(I) MKSP(I)- MKSP(I)- 1 1 LED Indicator (AC Coil) MKSP(I)N MKSP(I)N- MKSP(I)N MKSP(I)N- MKSP(I)N- 1 1 Diode (DC Coil: Standard Polarity) MKSP(I)N MKSP(I)N- MKSP(I)N MKSP(I)N- MKSP(I)N- 1 1 LED Indicator and DIode (DC Coil: Reverse Polarity) MKSP(I)N1 MKSP(I)N1- MKSP(I)N1 MKSP(I)N1- MKSP(I)N1-1 1 Standard Models (DC Coil: Standard Polarity) MKSP(I)-D MKSP(I)-D- MKSP(I)-D MKSP(I)-D- MKSP(I)-D- 1 1 Diode (DC Coil: Reverse Polarity) MKSP(I)1-D MKSP(I)1-D- MKSP(I)1-D MKSP(I)1-D- MKSP(I)1-D- 1 1 LED indicator (DC Coil) MKSP(I)N-D MKSP(I)N-D- MKSP(I)N-D MKSP(I)N-D- MKSP(I)N-D- 1 1 General-purpose Relays MK-S New Model
8 Varistor (AC Coil) MKSP(I)-V MKSP(I)-V- MKSP(I)-V MKSP(I)-V- MKSP(I)-V- 1 1 LED indicator and Varistor (AC Coil) MKSP(I)N-V MKSP(I)N-V- MKSP(I)N-V MKSP(I)N-V- MKSP(I)N-V- 1 1 Safety Precautions Safety Precautions for Correct Use Installation Mount the MK-S with the marking at the bottom. Handling Check the coil polarity of models with built-in diodes and wire them correctly (DC operation coil). Test Button Do not use the test button for any purpose other than testing. Be sure not to touch the test button accidentally as this will turn the contacts ON. Before using the test button, confirm that circuits, the load, and any other connected item will operate safely. Check that the test button is released before turning ON relay circuits. If the test button is pulled out too forcefully, it may bypass the momentary testing position and go straight into the locked position. Use an insulated tool when you operate the test button. test buttons or LED indicators fulfill the requirements for reinforced insulation between live parts and the front of cover only when the Relay is in a complete condition, i.e. with the nameplate, nameplate frame, test button, and slider in place. If any of these parts are removed, only the requirements for basic insulation are fulfilled. General-purpose Relays MK-S New Model
9 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ( Omron ). Omron objects to any terms or conditions proposed in Buyer s purchase order or other documents which are inconsistent with, or in addition to, these Terms.. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 0 days unless otherwise stated in the invoice.. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron s payment terms and (ii) Buyer has no past due amounts.. Interest. Omron, at its option, may charge Buyer 1-1/% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms.. Orders. Omron will accept no order less than $00 net billing.. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products.. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron.. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts.. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in break down situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 1. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 0 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 1. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. 1. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. 1. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 1. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 1. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to forbidden or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. 1. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, including means including without limitation ; and Omron Companies (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON S PRODUCT IS PROP- ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof.. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability.. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product.. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
10 OMRON ELECTRONICS LLC THE AMERICAS HEADQUARTERS Schaumburg, IL USA OMRON CANADA, INC. HEAD OFFICE Toronto, ON, Canada OMRON ELETRÔNICA DO BRASIL LTDA HEAD OFFICE São Paulo, SP, Brasil OMRON ARGENTINA SALES OFFICE Cono Sur OMRON CHILE SALES OFFICE Santiago.0. OMRON ELECTRONICS MEXICO SA DE CV HEAD OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca, N.L J1-E1-01 Note: Specifications are subject to change. 00 Omron Electronics LLC Printed in U.S.A.
General Purpose Relay MK Exceptionally reliable general purpose relay. Long life (minimum 100,000 electrical operations) assured by silver contacts. Built-in operation indicator (mechanical, LED), diode
Safety Relay Unit ( I/O Unit Type) CQM1-SF200/CS1W-SF200 CSM_CQM1-SF200_CS1W-SF200_DS_E_2_1 A Safety Relay Unit That Functions as a I/O Unit. Less Installation Space and Wiring Required. Safety Relay Unit
Pushbutton Switch (Cylindrical 10.5-dia.) CSM DS_E_4_4 Built-in V-series Miniature Basic Switch for Compatibility with Business and Consumer Equipment Momentary operation and lock. available in six colors.
Latching Relay CSM DS_E_4_1 Magnetic Latching Version of G2A Ideal for Sequence Control Double-winding latch system with continuous rating. Terminals pulled from the respective junctions between the built-in
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing
FA Integrated Tool Package CX-One CX-One Ver.4 CSM_CX-One_DS_E_3_1 Greater Integration with the CX-One The CX-One is a comprehensive software package that integrates PLC Programming Software with Support
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
SELLING TERMS AND CONDITIONS 1. The Agreement. All sales by Sterling Machinery, Inc., an Arkansas corporation (the Seller ) to the purchaser of Seller s Goods (the Buyer ) shall be governed by the following
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
Terms and Conditions ACCEPTANCE. Except as otherwise agreed in a written agreement signed by both parties, these Terms and Conditions will govern Buyer s purchase order. BI Technologies acceptance of Buyer
PDQ Workholding LLC Terms and Conditions of Sale Unless otherwise specifically stated in the offer to sell goods submitted herewith ( Sales Quotation ), these Terms and Conditions establish the rights,
General-purpose Relay An Improved Miniature Power Relay with Many Models for Sequence Control and Power Applications A wide range of relay variations including ones with operation indicators, high-capacity
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE045 (VDE approval: C2 insulation grade), UL8, CSA22.2, SEV, SEMKO. Meets VDE0700 requirements for household products
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE (EN680-), UL08, CSA22.2. Meets EN6033- requirements for household products. Clearance and creepage distance: 8 mm/8
Infineon Technologies North America Corp. Terms and Conditions of Sale 1. GENERAL 1.1 Contract Terms. These Terms and Conditions of Sale (the Agreement ) shall apply to any offer made by Infineon Technologies
TERMS AND CONDITIONS 1. Definitions. Buyer means the person, corporation or other entity purchasing Products from Seller. Products means all goods and materials to be provided pursuant to this Sales Acknowledgment.
Quotations, Purchase Orders, Acknowledgements, Packing Lists/Slips, Invoices & Credits All quotations of Seller ( Quotations ) and purchase orders of Buyer ( Purchase Orders ) shall be subject to these
DATA DETECTION TECHNOLOGIES LTD ("DATA") Terms and Conditions to Integrator Agreement These DATA Terms and Conditions (the "Integrator Terms and Conditions") govern all and any transactions by which any
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
GENERAL CABLE COMPANY LTD. TERMS AND CONDITIONS OF SALE (Canada) 1. ACCEPTANCE. This is an offer for General Cable Company Ltd. ( Seller ) to sell the product(s) ( Goods ) offered by it to the party to
General Product Retail Agreement This agreement ("Agreement") is entered into on the day of, 200, by and between NATIONAL RURAL TELECOMMUNICATIONS COOPERATIVE, a District of Columbia corporation ("NRTC"
ZFX-C10/15-CD Easy Vision Touch, Connect & Go Easy vision intuitive teach & go user interfaces Live built-in LCD touch monitors for setup and iediate feedback Counication centralized setup & inspection
General Terms and Conditions of Sale and Delivery BruggemannChemical U.S., Inc. Date: January 1, 2012 I. General 1.1 The following general terms and conditions of sale and delivery (hereinafter General
General-purpose Relay MY Versatile, Multi-featured, Miniature Power Relay for Sequence Control and Power Switching Applications Models with lockable test buttons now available. Multiple features available,
Surfacemounting Relay Ultracompact and Slim DPDT Relay Suitable for highdensity mounting.(.7 mm (W). mm (L) 9 mm (H)). Dielectric strength of, VAC and an impulse withstand voltage of 2, V for 2 μs (conforms
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
INVOICE TERMS AND CONDITIONS OF SALE (QNX Software Systems designated below as "Seller") DEFINITIONS In these Terms: QNX Software Systems or QSS means QNX Software Systems International Corporation. "Software"
All products furnished by Jinan Meide Casting Co. Ltd, shall be in accordance with the following terms and conditions unless otherwise agreed to in writing: ACCEPTANCE AND COMPLETE AGREEMENT Buyer s order
SolarEdge Technologies Ltd. GENERAL TERMS AND CONDITIONS 1. General. This document, entitled General Terms and Conditions (referred to herein as the Agreement ), forms an integral part of the quotation
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
Original instructions Smile 11 AS-i Emergency stop with safe AS-i input node SAFETY AT WORK ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
PURCHASE ORDER TERMS AND CONDITIONS 1. DEFINITIONS: In these Terms and Conditions and all documents related to the Purchase Order: Purchaser means the entity issuing the Purchase Order as identified on
PRODUCT SALES AGREEMENT The terms and conditions of this Product Sales Agreement ( Agreement ) sets forth the terms under which Buyer may acquire and use PMC products identified in the executed PMC sales
New Product Phase-sequence Phase-loss Relay K8DS-PH Three-phase Phase-sequence Phase-loss Relay Using Voltage Detection Method Lineup includes a 17.5-mm slim, compact model. Greater resistance to inverter
STANDARDS TERMS & CONDITIONS OF SALE 1. ENTIRE AGREEMENT. The party to whom goods are being sold, either by means of electronic data interchange or a traditional paper transaction is Buyer. We are Seller.
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
MCPU Standard Contract 101 Agreement Between Seller and Buyer For Sale on Credit This document has important legal consequences. Consultation with an attorney is recommended with respect to its completion,
LOGIX Fax to Email Service ACCEPTANCE OF TERMS AND CONDITIONS This agreement is between LOGIX Communications, L.P. dba LOGIX Communications ("LOGIX") and Customer ("you" or "Customer"), as an authorized
TERMS AND CONDITIONS ACCEPTANCE OF ANY PURCHASE ORDER FROM A CUSTOMER FOR USE OF ANY EQUIPMENT AND SOFTWARE PROVIDED BY RX MONITORING SYSTEMS INC. ( RXMS ) IS CONDITIONED UPON THESE TERMS AND CONDITIONS.
GSKDirect Terms and Conditions of Sale The following terms and conditions of sale, as the same may be amended by GSK from time to time in its sole discretion (the "GSK Standard Terms and Conditions" or
Triton Systems of Delaware, LLC 21405 B Street 866.7.TRITON Triton Systems of Delaware, LLC Warranty Statement TRITON WARRANTY STATEMENT The Manufacturer warrants that the products delivered to a distributor
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
1. General. All quotations furnished by Precision MicroDynamics Inc., ( PMDi ) or its authorized agents are solely for information of the party to whom the Quotation is addressed ( Buyer ). Any order resulting
PCB Power elay The Best Seller eneral purpose power elays of single-pole0 A and double-pole A. Safety-oriented design with dielectric strength of,000 V between coil and contacts, and surge resistance of
ADI 9510-B Advantium 2 Plus Alarm INSTALLATION AND OPERATING INSTRUCTIONS Carefully Read These Instructions Before Operating Carefully Read These Controls Corporation of America 1501 Harpers Road Virginia
FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
This Master Services Agreement ( MSA ) is entered into by Rack Alley Inc., a Wyoming corporation, and its affiliates ( Company ), and the below-signed customer ( Customer ) on the date Customer signs the
Dear Valued Customer, Below is an overview of the Molex lease process as it applies to Molex Application Tooling equipment. Lease process: Molex does not offer leases for all of the equipment that we promote.
END USER LICENSE AGREEMENT ( EULA ) PLEASE READ CAREFULLY THIS EULA IS A LEGAL AGREEMENT BETWEEN YOU, EITHER AS AN INDIVIDUAL, COMPANY OR OTHER LEGAL ENTITY (IN ANY CAPACITY REFERRED TO HEREIN AS END USER,
ACCENTURE VIETNAM LTD PURCHASE ORDER TERMS AND CONDITIONS 1. The Vendor-furnished products (including, without limitation, software, hardware, equipment and any parts, components and accessories) ( Products
Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)
DATA SHEET MINIATURE SIGNAL RELAY EC SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTI The EC series has reduced mounting space but sustained high-performance of NEC
Inductive Proximity Sensor in full metal housing Full body stainless steel housing for highest mechanical protection Low frequency modulation for metal chip immunity Flame retardant cable for high protection
Original instructions Tina 3A/Aps Adaptor unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
TERMS AND CONDITIONS These Terms and Conditions are applicable to the use of this website (the Website ), regardless of how You accessed it. You or any derivation thereof, as used herein refers to a user
12405 GRANT STREET THORNTON, CO 80241 303.301.3000 FAX 866.572.5266 WWW.VIRTUAL.COM BOISE DENVER HOUSTON LOS ANGELES NEW ORLEANS OKLAHOMA CITY PHOENIX SALT LAKE CITY SAN DIEGO SEATTLE MASTER TERMS & CONDITIONS
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
WELLMAN COOPERATIVE TELEPHONE ASSOCIATION TERMS OF SERVICE LOCAL EXCHANGE SERVICE About These Terms and Conditions: Wellman Cooperative Telephone Association (the "Company") provides regulated local exchange
NEWCOMB TRANSPORTATION AND LOGISTICS SHIPPER TERMS & CONDITIONS 1. APPLICABILITY These Terms & Conditions and agreed upon pricing documents apply to all broker services (the Services ) provided by Youbulk,
HART TELEPHONE COMPANY SERVICE TERMS AND CONDITIONS OF SERVICE I. GENERAL TERMS These Terms and Conditions of Services govern all services provided by Hart Telephone Company ( Hart ). When you, the Customer,
KRONOS CANADA, INC. TERMS AND CONDITIONS OF SALE 1. Terms; Acceptance; Other Documents These terms and conditions (this Agreement ) contains the terms and conditions that apply to all purchases of products
WEBSITE DEVELOPMENT STANDARD TERMS AND CONDITIONS A. Client commitment: Client agrees to allocate time and process information, as needed, during the duration of the project. Client agrees to review the
BROCADE COMMUNICATIONS SYSTEMS, INC. END USER SOFTWARE LICENSE AGREEMENT FOR BROCADE IP ANALYTICS PACK FOR VMWARE VREALIZE OPERATIONS IMPORTANT: READ THIS CAREFULLY BEFORE INSTALLING, USING OR ELECTRONICALLY
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
New Product Solid State Relays for Heaters Single-phase G3PE Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications. RoHS compliant. Models also available
Attachment A to Corporate Cash Management Services Agreement COMMERCIAL BILL PAYMENT SERVICES TERMS AND CONDITIONS This Attachment A to the Corporate Cash Management Services Agreement between NewDominion
Digital Sensor CSM DS_E_4_3 Sensor with Easy-to-Read LED Display status can be checked at a glance from the digital display and bar display. Measurement pressure prevents incorrect outputs due to momentary
RydeSmart Services General Terms and Conditions These Terms of Service together with Schedule J form a legal contract between you and Ryder (the Agreement ) that governs your use of RydeSmart (including
CYPRESS SEMICONDUCTOR CORPORATION SALES TERMS AND CONDITIONS REVISED MARCH 12, 2015 These Sales Terms and Conditions ("Agreement") apply to all sales of products and services by Cypress Semiconductor Corporation,