VS-60EPU06PbF, VS-60EPU06-N3, VS-60PU06PbF, VS-60PU06-N3 Ultrafast Soft Recovery iode, 60 FRE Pt TO-247 modified athode to base 2 1 3 athode node VS-60EPU06PbF VS-60EPU06-N3 PROUT SUMMRY TO-247 athode to base 2 1 3 node node VS-60PU06PbF VS-60PU06-N3 Package TO-247 modified (2 pins), TO-247 I F(V) 60 V R 600 V V F at I F 1.11 V t rr typ. See Recovery table T J max. 175 iode variation Single die FETURES Ultrafast recovery time Low forward voltage drop 175 operating junction temperature esigned and qualified according to JEE -JES47 Material categorization: for definitions of compliance please see /doc?99912 BENEFITS Reduced RFI and EMI Higher frequency operation Reduced snubbing Reduced parts count vailable ESRIPTION / PPLITIONS These diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for HF welding, power converters and other applications where switching losses are not significant portion of the total losses. BSOLUTE MXIMUM RTINGS PRMETER SYMBOL TEST ONITIONS MX. UNITS athode to anode voltage V R 600 V ontinuous forward current I F(V) T = 116 60 Single pulse forward current I FSM T = 25 600 Maximum repetitive forward current I FRM Square wave, 20 khz 120 Operating junction and storage temperatures T J, T Stg -55 to +175 ELETRIL SPEIFITIONS (T J = 25 unless otherwise specified) PRMETER SYMBOL TEST ONITIONS MIN. TYP. MX. UNITS Breakdown voltage, blocking voltage V BR, V R I R = μ 600 - - Forward voltage V F I F = 60, T J = 125-1.20 1.42 I F = 60-1.35 1.68 V I F = 60, T J = 175-1.11 1.30 V R = V R rated - - 50 Reverse leakage current I R T J = 150, V R = V R rated - - 500 μ Junction capacitance T V R = 600 V - 39 - pf Revision: 09-Jul-15 1 ocument Number: 94023 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?90
VS-60EPU06PbF, VS-60EPU06-N3, VS-60PU06PbF, VS-60PU06-N3 YNMI REOVERY HRTERISTIS (T J = 25 unless otherwise specified) PRMETER SYMBOL TEST ONITIONS MIN. TYP. MX. UNITS Reverse recovery time t rr T J = 25-81 - ns I F = 1, di F /dt = 200 /μs, V R = 30 V - 34 45 T J = 125-164 - Peak recovery current I RRM T I F = 60 J = 25-7.4 - di F /dt = 200 /μs T J = 125 V R = 200 V - 17.0 - T J = 25-300 - Reverse recovery charge Q rr T J = 125-1394 - n THERML - MEHNIL SPEIFITIONS PRMETER SYMBOL TEST ONITIONS MIN. TYP. MX. UNITS Thermal resistance, R thj - - 0.63 junction to case K/W Thermal resistance, Mounting surface, flat, smooth R ths - 0.2 - case to heatsink and greased Weight Mounting torque Marking device ase style TO-247 modified ase style TO-247-5.5 - g - 0.2 - oz. 1.2 (10) - 60EPU06 60PU06 2.4 (20) N m (lbf in) 0 0 I F - Instantaneous Forward urrent () 10 T J = 175 T J = 125 T J = 25 I R - Reverse urrent (µ) 10 1 0.1 0.01 T J = 175 T J = 125 T J = 25 1 0 0.5 1.0 1.5 2.0 2.5 V F - Forward Voltage rop (V) 3.0 0.001 0 200 300 400 500 600 V R - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage rop haracteristics Fig. 2 - Typical Values of Reverse urrent vs. Reverse Voltage Revision: 09-Jul-15 2 ocument Number: 94023 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?90
VS-60EPU06PbF, VS-60EPU06-N3, VS-60PU06PbF, VS-60PU06-N3 0 T - Junction apacitance (pf) T J = 25 10 0 200 300 400 500 600 V R - Reverse Voltage (V) Fig. 3 - Typical Junction apacitance vs. Reverse Voltage Z thj - Thermal Impedance ( /W) 1 0.1 0.7 0.5 0.3 0.1 0.05 0.01 0.00001 0.0001 0.001 0.01 0.1 1 T J τ 1 i = τi/ri R 1 R 2 R 3 τ 2 τ 3 t on - Rectangular Pulse uration (s) T Ri ( /W) 0.06226 0.32503 0.24271 τi (s) 0.00049 0.01294 0.24310 Notes: 1. uty factor = t on /period 2. Peak T J = P M x Z thj + T 10 Fig. 4 - Maximum Thermal Impedance Z thj haracteristics 180 140 llowable ase Temperature ( ) 160 140 120 80 Square wave ( = 0.50) 80 % rated V R applied See note (1) 60 0 20 40 60 80 verage Power Loss (W) 120 80 60 40 20 RMS limit = 0.01 = 0.02 = 0.05 = 0.10 = 0.20 = 0.50 0 0 20 40 60 80 I F(V) - verage Forward urrent () I F(V) - verage Forward urrent () Fig. 5 - Maximum llowable ase Temperature vs. verage Forward urrent Fig. 6 - Forward Power Loss haracteristics Revision: 09-Jul-15 3 ocument Number: 94023 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?90
VS-60EPU06PbF, VS-60EPU06-N3, VS-60PU06PbF, VS-60PU06-N3 t rr (ns) 300 250 200 150 T J = 125 T J = 25 I F = 30 I F = 60 Q rr (n) 3000 2500 2000 1500 0 T J = 125 T J = 25 I F = 30 I F = 60 500 50 0 10 0 10 0 di F /dt (/µs) Fig. 7 - Typical Reverse Recovery Time vs. di F /dt Note (1) Formula used: T = T J - (Pd + Pd REV ) x R thj ; Pd = Forward power loss = I F(V) x V FM at (I F(V) /) (see fig. 6); Pd REV = Inverse power loss = V R1 x I R (1 - ); I R at V R1 = 80 % rated V R di F /dt (/µs) Fig. 8 - Typical Stored harge vs. di F /dt V R = 200 V L = 70 μh 0.01 Ω.U.T. di F /dt adjust G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test ircuit (3) t rr 0 I F t a tb (2) I RRM Q rr 0.5 I RRM di (rec)m /dt (5) 0.75 I RRM (1) di F /dt (1) di F /dt - rate of change of current through zero crossing (2) I RRM - peak reverse recovery current (3) t rr - reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 I RRM and 0.50 I RRM extrapolated to zero current. Q rr - area under curve defined by t rr and I RRM t rr x I Q RRM rr = 2 (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr Fig. 10 - Reverse Recovery Waveform and efinitions Revision: 09-Jul-15 4 ocument Number: 94023 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?90
VS-60EPU06PbF, VS-60EPU06-N3, VS-60PU06PbF, VS-60PU06-N3 ORERING INFORMTION TBLE evice code VS- 60 E P U 06 PbF 1 2 3 4 5 6 7 1 - product 2 - urrent rating (60 = 60 ) 3 - ircuit configuration: E = single diode = single diode, 3 pins 4 - Package: P = TO-247 (modified) 5 - Type of silicon: U = ultrafast recovery 6 - Voltage rating (06 = 600 V) 7 - Environmental digit: PbF = lead (Pb)-free and RoHS-compliant -N3 = halogen-free, RoHS-compliant and totally lead (Pb)-free ORERING INFORMTION (Example) PREFERRE P/N QUNTITY PER T/R MINIMUM ORER QUNTITY PKGING ESRIPTION VS-60EPU06PbF 25 500 ntistatic plastic tube VS-60EPU06-N3 25 500 ntistatic plastic tube VS-60PU06PbF 25 500 ntistatic plastic tube VS-60PU06-N3 25 500 ntistatic plastic tube LINKS TO RELTE OUMENTS imensions Part marking information TO-247 modified TO-247 TO-247 modified PbF TO-247 modified -N3 TO-247PbF TO-247-N3 /doc?95541 /doc?95542 /doc?95255 /doc?95442 /doc?95226 /doc?95007 Revision: 09-Jul-15 5 ocument Number: 94023 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?90
IMENSIONS in millimeters and inches TO-247-50 mils L/F modified Outline imensions B (2) R/2 Q (3) E N S 2 (6) Ø P (atum B) Ø K M B M Ø P1 2 2 x R (2) 1 1 2 3 Thermal pad 4 (5) L1 L See view B E1 2 x b2 3 x b 0.10 M M b4 2 x e 1 View - Plating (b1, b3, b5) Base metal E E (c) c1 (b, b2, b4) Section -, -, E - E View B SYMBOL MILLIMETERS INHES MILLIMETERS INHES NOTES SYMBOL MIN. MX. MIN. MX. MIN. MX. MIN. MX. NOTES 4.65 5.31 0.183 0.209 2 0.51 1.35 0.020 0.053 1 2.21 2.59 0.087 0.102 E 15.29 15.87 0.602 0.625 3 2 1.17 1.37 0.046 0.054 E1 13.46-0.53 - b 0.99 1.40 0.039 0.055 e 5.46 BS 0.215 BS b1 0.99 1.35 0.039 0.053 Ø K 0.254 0.010 b2 1.65 2.39 0.065 0.094 L 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 L1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 N 7.62 BS 0.3 b5 2.59 3.38 0.102 0.133 Ø P 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 Ø P1-7.39-0.291 c1 0.38 0.84 0.015 0.033 Q 5.31 5.69 0.209 0.224 19.71 20.70 0.776 0.815 3 R 4.52 5.49 0.178 0.216 1 13.08-0.515-4 S 5.51 BS 0.217 BS Notes (1) imensioning and tolerance per SME Y14.5M-1994 (2) ontour of slot optional (3) imension and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body Thermal pad contour optional with dimensions 1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEE outline TO-247 with exception of dimension c and Q Revision: 21-pr-15 1 ocument Number: 95541 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?90
TO-247-50 mils L/F Outline imensions IMENSIONS in millimeters and inches B (2) R/2 Q (3) E N S 2 Ø K M B M (6) Φ P (atum B) 2 Φ P1 2 x R (2) 1 1 2 3 Thermal pad 4 (5) L1 L See view B E1 0.01 M B M 2 x b2 3 x b 0.10 M M b4 2 x e 1 View - Plating (b1, b3, b5) Base metal E E (c) c1 (b, b2, b4) Section -, -, E - E View B SYMBOL MILLIMETERS INHES MILLIMETERS INHES NOTES SYMBOL MIN. MX. MIN. MX. MIN. MX. MIN. MX. NOTES 4.65 5.31 0.183 0.209 2 0.51 1.35 0.020 0.053 1 2.21 2.59 0.087 0.102 E 15.29 15.87 0.602 0.625 3 2 1.17 1.37 0.046 0.054 E1 13.46-0.53 - b 0.99 1.40 0.039 0.055 e 5.46 BS 0.215 BS b1 0.99 1.35 0.039 0.053 Ø K 0.254 0.010 b2 1.65 2.39 0.065 0.094 L 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 L1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 N 7.62 BS 0.3 b5 2.59 3.38 0.102 0.133 Ø P 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 Ø P1-7.39-0.291 c1 0.38 0.84 0.015 0.033 Q 5.31 5.69 0.209 0.224 19.71 20.70 0.776 0.815 3 R 4.52 5.49 0.178 0.216 1 13.08-0.515-4 S 5.51 BS 0.217 BS Notes (1) imensioning and tolerancing per SME Y14.5M-1994 (2) ontour of slot optional (3) imension and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body Thermal pad contour optional with dimensions 1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEE outline TO-247 with exception of dimension c and Q Revision: 21-pr-15 1 ocument Number: 95542 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?90
Legal isclaimer Notice Vishay isclaimer LL PROUT, PROUT SPEIFITIONS N T RE SUBJET TO HNGE WITHOUT NOTIE TO IMPROVE RELIBILITY, FUNTION OR ESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. ll operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 ocument Number: 90