EC Type Examination Certificate Number: UK/ 0120/ SGS0010 Elster Metering Systems Instrument Identification: A1100, Electricity Meter, LB********* Poly Phase, Credit, Active Import/ Export, Multi-rate, Direct Connected/ Transformer Operated, Electricity Meter with LCD or Electromechanical Display Instrument Traceable Number UK/ 0120/ SGS0010 has been assessed and certified as meeting the requirements of EC Directive 2004/22/EC on Measuring Instruments Annex B It is certified that the manufacturer s technical design and specimen for the above instrument has been examined and, based on the evidence submitted, it is considered that the instrument conforms to the requirements of MI-003 of EC Directive 2004/22/EC. This certificate is to be used in conjunction with a certificate covering the product verification as required in Annex D or Annex F. This certificate is valid for 10 years from until 16 th September 2017 Certification is based on report number(s) EMA110672/ 1/ CT dated EMA110672/ 1/ WC dated Notified Body Number 0120 Authorised Signature Notified Body SGS United Kingdom Ltd, 202B Worle Parkway, Weston-super-Mare, BS22 6WA UK t +44 (0)1934 522917 f +44 (0)1934 522137 www.sgs.com Contact Address SGS United Kingdom Ltd, Unit 10, South Industrial Estate, Bowburn, Durham, DH6 5AD UK t +44 (0)191 377 2000 f +44 (0)191 377 2020 www.sgs.com Page 1 of 5 MID-B06E Rev 2
Approval Annex for No. UK/ 0120/ SGS0010 Manufacturer : Elster Metering Systems Type of Meter(s) : A1100 Description of Meter : Poly Phase, Credit, Active Import/ Export, Multi-rate, Direct Connected/ Transformer Operated, Electricity Meter with LCD or Electrometrical Display Accuracy Class (es) : A or B (kwh) Software Version No. : 2-01166-E2a or 2-01166-I Location : Nameplate Firmware Version No : 2-01166-E2a or 2-01166-I Location : Nameplate Bill Of Materials No. : JG0517 with LCD JG0518 with Mech Register Meter Location : Indoor Sealing Type : Wire & Steel Crimp Location : 2 x Front of meter Inaccessible without Integrity of Meter : breaking seals Temperature Range : -40 o C to +70 o C Type of Circuit(s) : 1p2w, 1p3w, 2p of 3p4w, 2p3w, 3p3w, 3p4w. Current Range(s) (A) : Direct Connection 0.25-5(100)A or 0.25-5(85)A (Any value Iref 5, up to Imax) Transformer Operated 0.01-1(10)A or 0.01-1(6)A (Any value of In 1, up to Imax) Frequency : 50Hz Voltage Range(s) (V) : Direct Connection 220-240V (L-N), 380-415V (L-L) Transformer Operated 220-240V (L-N), 380-415V (L-L) Page 2 of 5
Photograph of meter Internal View 1 Photograph of meter Internal View 2 Page 3 of 5
Photograph of meter Internal View 3 Photograph of meter Internal View 4 Page 4 of 5
Product Variant Identification Details: Type Designation Description of meter LB PRODUCT/ TERMINATION: Poly phase BS/DIN Termination SERVICE TYPE: 3 3p4w, 2p of 3p4w, 2p3w (180), 2p3w (90), 1p2w 2 3p3w CURRENT RANGE: A Direct Connected 5-100A B Direct Connected 5-85A C CT Operated 1A-6A D CT Operated 1A-10A VOLTAGE RANGE: A 220-240V (L-N), (LB3 ****** variants) B 220-240V (L-L), (LB2 ****** variants) ACCURACY CLASS: B 50Hz Class B kwh (EN 50470-3), Class 2 kvarh (IEC 62053-23) C 50Hz Class A kwh (EN 50470-3), Class 3 kvarh (IEC 62053-23) TARIFF CONFIGURATION Source of import register configured at time of manufacture Mechanical & LCD: B Single Rate kwh import only LCD Only: D Single Rate kwh import and export register R Two rate kwh import only switch to any live (3p4w) T Two rate kwh import register and export register switched to any live (3p4w) V Two rate kwh import only floating 2 auxiliary terminals X Two rate kwh import register and export register floating 2 auxiliary terminals DISPLAY CONFIGURATION: refer to manufacturer model code & manuals Mechanical only B Mechanical register 7 digit 1/10 th kwh resolution C Mechanical register 6 digit 1/10 th kwh resolution *For additional configurations refer to manufacturer, not applicable to Type approval LCD Only Customer specific display configuration not applicable to Type approval DISPLAY CYCLE (LCD Only) S Customer specific display sequence not applicable to Type approval AUXILIARY OUTPUT N No (Aux) P SO (Pulsing) tied to neutral 1 aux. terminal (Not 2 rate floating) 3p4w only Q SO (Pulsing) floating 2 auxiliary terminals (1-Rate only) S IrDA tied to neutral 1 auxiliary terminal (Not 2 rate floating) 3p4w only T IrDA floating 2 auxiliary terminals (1 Rate only) *For additional outputs refer to manufacturer, not applicable to Type approval COMMUNICATIONS S IrDA optical serial port, data rate set at time of manufacture OTHER OPTIONS B Standard (Extended) Terminal cover C Standard (Extended) Terminal cover with cut-out For additional options refer to manufacturer, not applicable to Type approval VERSION Refer to manufacturers model code and manual, not applicable to type approval SPECIAL ADDITIONS Refer to manufacturers model code and manual, not applicable to type approval. Modifications to the meter(s) described according to approval No.UK/ 0120/ SGS0010 must be notified to the issuing body to confirm the meter(s) continuing compliance to the relevant pattern approval standard(s). Page 5 of 5