CHANNELLING SYSTEMS AND ACCESSORIES GENERAL PRODUCTS CATALOGUE
GRUPO MAGTEL Magtel is a business group, leader in the application of technology solutions in the areas of Water, Energy and Telecommunications. The company has 550 employees and It s turnover exceeds 100 millions in the last 5 years. His five-year strategic plan is characterized by an intense application of its Corporate Social Responsibility policy focused on innovation and the development of its professionals, sustainability, social and economic growth and full transparency in its economic and financial policy. The Group is composed of eight specialized companies as a result of an important development of its business areas: MAGTEL OPERACIONES MAGTEL INGENIERÍA MAGTEL COMUNICACIONES AVANZADAS MAGTEL PROYECTOS Y CONCESIONES MAGTEL SISTEMAS MAGTEL AGUAS MAGTEL I+D+I MAGTEL INDUSTRIAL MISSION The mission of the Business Group focuses on providing the infrastructure of the most advanced technological systems in order to contribute to more efficient use of natural resources and better quality of life for today and tomorrow society. VISSION Sustainability is the foundation on which our economic and industrial models should be supported in order to ensure a comfortable and cleaner world for future generations; and corporate responsibility, the continuing challenge for this development is balanced with the people and the environment. 2
MAGTEL INDUSTRIAL Magtel is a company of the Magtel Group that has its own mission: the manufacturing, marketing and distribution of polyethylene materials applied to electrical, telecommunication and water installations, for both irrigation and sanitation. Magtel was set up in 2006 with the aim of satisfying the highest demands in quality and services of all the leading professionals, offering materials for infrastructures that respond to the most stringent quality and durability controls. Magtel is now situated in a preferential place as a manufacturer and marketer of solutions for the channelling sector, allowing it to plan a great future as an independent company eager to grow along with its customers. Over the past year, Magtel has extended its portfolio of products, it has achieved the most advanced approvals and it has launched its second manufacturing line. QUALITY AND SUSTAINABILITY In a short time Magtel hhas attained a high level of recognition, thanks to growth based on values of stability, efficiency and future. The professionalism of our service, the quality of our products and a speedy response are our main identifying characteristics. The recognised quality of Magtel is backed by a comprehensive management system with all the AENOR certifications and required approvals. At Magtel we carry out traceability controls and our requirements include the rigorous selection and assessment of suppliers and raw materials with the aim of attaining the greatest recognition: the satisfaction of our customers. LOCATION The premises of Magtel strategically located in Córdoba, and above all the human capital, have allowed us as a young company to position ourselves as a leader in terms of response time and flexibility, always offering our customers a competitive advantage over other alternatives. In addition the Magtel Group has offices in Andalusia, Extremadura and Madrid, and is now in the process of internationalization, setting its sights on North Africa, the USA and Latin America. 3
ELECTRICITY AND TELECOMMUNICATIONS CORRUGATED PIPE DOUBLE WALL DIÁMETRO OUTSIDE DIAMETER EXTERIOR (mm) LONGITUD LENGTH OF DE LOS THE ROLLOS ROLLS (m) (m) LONGITUD LENGTH OFDE LAS THE BARRAS BARS (m) (m) METROS METRES / PALLET PALET BARRAS BARS METROS METRES / TRAILER ROLLOS ROLLS METROS METRES / TRAILER BARRAS BARS 40 50/100 - - 30.000-50 50/100 - - 20.000-63 50/100 - - 14.500-75 50 - - 11.000-90 50 - - 6.400-110 50 6 684 4.500 5.472 125 50 6 510 3.000 4.080 160 50 6 312 2.000 2.496 200 25 6 210 1.000 1.680 250-6 120-960 315-6 72-576 PROPERTIES Speed and ease of installation. Curvature flexibility. High resistance to compression and impact. Resistance to the action of chemical agents. Thermal insulation. Halogen-free and recyclable. High resistance to weathering. Resistance to abrasion and piercing. Fully waterproof. APPLICATIONS Protection of buried copper and fibre-optic cables for communications and signals. Protection of conductors for energy transportation. TECHNICAL CHARACTERISTICS Density > 0.945 g/cm 3 according to ISO 1183 Fluency 0.1-0.6 g/10 min according to ISO 1133 Impact resistance: NORMAL USAGE according to UNE EN 50086-2-4 Compressive strength: deformation < 5% to 450N 4
RECOGNIZED QUALITY APPROVALS AND CERTIFICATES Magtel is aware that respect for the environment is everyone s responsibility. For this reason we minimize the environmental impact of our activities and have a quality system that complies with the highest standards. ISO 9001 - AENOR Quality Management System ISO 9001 - IQNet Quality Management System ISO 14001 - AENOR Environmental Management System ISO 14001 - IQNet Environmental Management System OSHAS 18001 - AENOR Health and Safety in the Workplace Management System OSHAS 18001 - IQNet Health and Safety in the Workplace Management System Product Certificate - AENOR Nº 030/002041 B-BIELEC Diameter 110-125-160-200 mm Management systems for production by extrusion of corrugated and smooth polyethylene tubes of up to 250 mm in diameter and also for marketing of smooth polyethylene tubes. 5
ELECTRICITY AND TELECOMMUNICATIONS MONOTUBE WALL THICKNESS (mm) - - - 2.0 2.0 2.4 2.9 3.5 WALL THICKNESS (mm) 0 2.0 2.0 2.4 3.0 3.8 4.5 5.4 WALL THICKNESS (mm) 2.0 2.3 2.9 3.7 4.6 5.8 6.8 8.2 COLOUR * thicknesses, please contact our sales department. DIAMETER (mm) 20 25 32 40 50 63 75 90 THREE-TUBE WALL THICKNESS (mm) 2,4 2,4 WALL THICKNESS (mm) 2,6 3 WALL THICKNESS (mm) 3,0 3,5 COLOUR DIAMETER (mm) 40 50 LENGTH OF THE ROLL (m) 500 350 METRES / ROLL 6.500 4.550 * thicknesses, please contact our sales department. PROPERTIES High Density Polyethylene (HDPE) Resistance to mechanical loads such as elongation, impact, compression, etc. Resistance to thermal exposure such as abrasion and chemical agents. Resistance to the action of UV rays. Easy weldability. APPLICATIONS Protection of fibre-optic, telecommunication and infrastructure channelling. Protection of conductors for transportation of energy. TECHNICAL CHARACTERISTICS Density > 0.945 g/cm 3 Elongation capacity: > 350% Coefficient of internal friction: < 0.15 Resistance to internal pressure: according to Norm UNE EN 12201 Tensile strength: > 19 Mpa Compressive strength: > 450 N Vicat temperature: < 120 Shrinkage: < 3% 6
ELECTRICITY AND TELECOMMUNICATIONS PVC DIAMETER (mm) 63 110 WALL THICKNESS (mm) 1,2 1,8-2,2 PROPERTIES Rigid 6m bars. Grey or black in colour. All required approvals met. APPLICATIONS Protection of cables for electrical installations. 7
DRAINAGE CORRUGATED PIPE BIDREN Y MONODREN OUTSIDE DIAMETER (mm) 90 110 160 200 DRILLING 120º 120º 120º 120º DRILLING 240º 240º 240º 240º DRILLING 360º 360º 360º 360º LENGTH OF THE ROLL (m) 50 50 50 25 PROPERTIES Manufactured according to Standard UNE 53994 EX. Drilling at 120, 240 and 360. 120º 240º 360º APPLICATIONS Surface drainage. Underground drains of civil buildings, retaining walls, communication pathways, railway networks, channels, sports areas, etc. TECHNICAL CHARACTERISTICS Ring stiffness for Monodren drain pipe: > 2.0 KN/m2 (UNE - EN 9969). Ring stiffness for Bidren drain pipe: > 4.0 KN/m2 (UNE - EN 9969). Impact resistance: 800 g to 1.80 m (UNE-EN 1411). SANITATION DOUBLE WALL CORRUGATED PIPE BISAN SN4 Y SN8 DIAMETER (mm) CHARACTERISTICS INTERNAL SYSTEM OUTSIDE INTERNAL LENGTH (m) Circumferential Stiffness 8 KN/m2 ISO 9969 160 137 6 200 173 6 250 220 6 315 260 6 Shock Resistance TIR 10% UNE EN 744 Ring Flexibility 30% EN 1446 Longitudinal Shrinkage 3% UNE EN 743 Heat Resistance Does not show cracks, delamination or bubbles ISO 12091 Longitudinal Shrinkage 3% UNE EN 1277 (Cond. B) PROPERTIES Manufactured according to European Standard EN 13476-1. Corrugated outer layer and smooth inner layer. Resistance to chemical agents, abrasion and crushing. 8
ACCESSORIES SLEEVES Applications Union of double-layer corrugated pipes. Material Polypropylene/polyethylene. Colour Black. Properties Resistant to the action of chemical agents. Adaptable to all tubes. Comments Flared at the ends. SEPARATORS Applications Clamping of double-layer corrugated pipes. Material Polypropylene. Colour Black. Properties Resistant to the action of chemical agents. Properties For 4 tubes. PLUGS Applications Sealing of double-layer corrugated pipes. Material Polypropylene/polyethylene. Colour Red/yellow. Properties Resistant to the action of chemical agents. High mechanical resistance. Properties High sealing capacity. SIGNALLING PLATES Manufactured according to current standard. Manufacturing material: polypropylene. Resistance greater than 3 times requirements of the standard. Available with text, anonymous or customised. TAPE Manufacturing material: polyethylene. Resistant to the action of chemical agents. Thickness: 15 cm. 30 cm. Available with text, anonymous or customised. 9
AGRICULTURAL IRRIGATION ECOMAGTEL POLYETHYLENE LOW DENSITY PIPING FOR MICRO-IRRIGATION BRANCHES 2,5 BAR Ø OUTSIDE (mm) WALL THICKNESS (mm) WEIGHT (Kg/m) ROLL (m) 12 1,0 0,038 500 16 1,2 0,060 400 20 1,3 0,080 300 ECOMAGTEL LOW-DENSITY POLYETHYLENE PRESSURE PIPING FOR AGRICULTURAL FACILITIES 4 BAR Ø OUTSIDE (mm) WALL THICKNESS (mm) WEIGHT (Kg/m) ROLL (m) 20 1,7 0,100 100 25 2 0,150 100 32 2,0 0,195 100 40 2,4 0,290 100 50 3,0 0,450 100 63 3,8 0,710 50/100 75 4,5 0,998 50 90 5,4 1,450 50 10
AGRICULTURAL IRRIGATION ECOMAGTEL LOW-DENSITY POLYETHYLENE PRESSURE PIPING FOR AGRICULTURAL FACILITIES 6 BAR Ø OUTSIDE (mm) WALL THICKNESS (mm) WEIGHT (Kg/m) ROLL (m) 20 2,0 0,115 100 25 2,3 0,170 100 32 2,9 0,268 100 40 3,7 0,425 100 50 4,6 0,655 100 63 5,8 1,030 50/100 75 6,8 1,440 50 90 8,2 2,085 50 10 BAR Ø OUTSIDE (mm) WALL THICKNESS (mm) WEIGHT (Kg/m) ROLL (m) 20 3,0 0,155 100 25 3,5 0,245 100 32 4,4 0,380 100 40 5,5 0,590 100 50 6,9 0,930 100 63 8,6 1,430 50/100 75 10,3 2,006 50 90 12,3 2,910 50 11
Ctra. Córdoba - Palma del Río, Km. 31 14730 Posadas (CÓRDOBA) P. +34 957 632 112 F. +34 957 631 243 industrial@magtel.es Download this document Magtel www.magtel.es MAGTEL GROUP CORPORATE HEAD-OFFICE CÓRDOBA Park Las Quemadas C/ Gabriel Ramos Bejarano, 114 14014 P. +34 957 429 060 F. +34 957 429 061 SEVILLA Aeronáutical Park Aerópolis C/ Juan Olivert, 9 41309 P. +34 955 337 633 F. +34 955 337 632 MÁLAGA Park La Huertecilla C/ Estado, 12-14 29004 MÁLAGA P. +34 952 179 901 F. +34 952 179 902 GRANADA Park Sierra Elvira C/ Raja Santa, Nave 3 18230 Atarfe (GRANADA) P. - F. +34 958 439 492 LUCENA Park Príncipe Felipe (Cerro Gordo) C/ Manzana, 7 Parcela 8-A 14900 Lucena (CÓRDOBA) P. +34 957 513 141 F. +34 957 511 760 HUELVA Commercial and Business Park La Raya C/ de la Industria 21110 Aljaraque (HUELVA) P. +34 959 103 377 F. + 34 959 261 710 LINARES Park Los Jarales 23700 Linares (JAÉN) P. +34 953 651 717 F. +34 953 653 400 JEREZ DE LA FRONTERA Park Santa Cruz Avda. de la Ilustración, 28 11407 Jerez de la Ftra. (CÁDIZ) P. +34 956 108 420 MÉRIDA C/ Marquesa de Pinares, 7 06800 Mérida (BADAJOZ) P. +34 924 312 472 F. +34 957 429 060 MADRID Park Los Olivos C/ Desarrollo, 3 28906 Getafe (MADRID) P. +34 916 814 620 F. +34 916 814 497 MOROCCO 59, Bd Zerktouni Résidence les Fleurs 9éme Etage, Appt 26 Casablanca P. +212 522 269 999 F. +212 522 209 999 PERU Calle Dos de Mayo, 534 Office207 Miraflores - Lima P. +51 1 221 9931 Production by extrusion of polyethylene corrugated tubes of up to 250 mm diameter.