CIVIL ENGINEERING. Sewage Pipe System. POLO-ECO plus PREMIUM 12. POLO-ECO plus PREMIUM 10
|
|
- Bennett Scott
- 7 years ago
- Views:
Transcription
1 CIVIL ENGINEERING Sewage Pipe System POLO-ECO plus PREMIUM 12. POLO-ECO plus PREMIUM 10
2 POLO-ECO plus PREMIUM The trend-setting advancement of 3-layer technology POLO-ECO plus PREMIUM with an extra measure of longitudinal stability offers clients and planners extended application possibilities with a high level of reliability External layer made of PP-BLEND + mineral reinforcement A specially developed external layer made of PP-BLEND reduces the thermal absorption rate of POLO-ECO plus PREMIUM pipes, providing optimal longitudinal stability and protection against surface damage. 2. Supporting layer made of PP + magnesium silicate Made of mineral-reinforced highly crystalline polypropylene, the intermediate layer is decisive for the tremendous resistance, solidity and rigidity, while simultaneously ensuring the pipe system s extreme toughness. 3. Internal layer made of PP This layer stands out due to its excellent resistance to chemicals in the 2 13 ph range, as well as the optimized flow behaviour resulting from its low roughness. In addition, it features high abrasion resistance and high impact strength. 20 years of experience with multi-layer technology! Ring Rigidity The POLO-ECO plus PREMIUM 10 pipe features a ring rigidity of 10 kn/m 2 (ring rigidity class SN 8). In class SN 8, the high ring rigidity of POLO-ECO plus PREMIUM 10 provides an ample margin of safety for virtually all installation and operational loads. POLO-ECO plus PREMIUM 12, classified in ring rigidity class SN 12, offers an additional measure of reliability.
3 POLO-TC () Socket System The new innovative sealing system. Premium quality that connects! Moulded push-fit socket Extended guidance section Inlaid safety retaining ring made from PP compound Safety-locked sealing ring and cleanable bead Optimal laying reliability Long-term impermeability TOP CONNECT SYSTEM Providing an extra measure of longitudinal stability Longitudinal stability practical application bvfs Salzburg laying gradient 2 The Testing and Research Facility for Structural Engineering Salzburg (bvfs) was commissioned to examine the practical suitability of POLO-ECO plus PREMIUM when laid in an area with a gradient of 2. The opened ground on the test site was classified as belonging to soil class GS6. Despite the extremely poor conditions prevalent in the ground, the suitability of POLO-ECO plus PREMIUM for this type of application was confirmed. Longitudinal stability testing by OFI - Austrian Research Institute for Chemistry and Technology In order to lay gravity sewage pipes with little gradient, the pipe has to be of high longitudinal rigidity. The wall structure of POLO-ECO plus PREMIUM pipes ensures that the ring rigidity is matched by outstanding longitudinal rigidity. POLO-ECO plus PREMIUM 12 and POLO-ECO plus PREMIUM 10 meet this requirement in an outstanding manner. A specially developed, reinforced PP BLEND external layer reduces the thermal absorption rate and thus contributes significantly to the longitudinal stability. Maximum curvature versus temperature difference [ Max. curvature mm ] [ temperature difference C ] n POLO-ECO plus PREMIUM 10 n POLO-ECO plus PREMIUM 12 n other tested plastic pipe systems Ask the pipe manufacturers to provide you with the test results relating to longitudinal stability! Extract from OFI Test Report No Vienna, January 2011
4 Superior impermeability and long-term impermeability The leak test reveals the truth: Even in the event of extreme pipe deformation, the socket connection retains its tightness. The long-term impermeability of the elastomer sealing ring connection is achieved by testing the clamping pressure and the impermeability of the pipe connection in line with EN Quality brought to the point Testing of the point load reliability and the puncture resistance confirms the excellence of the 3-layer technology and proves the ability of POLO-ECO plus PREMIUM to withstand even extreme loads. POLO-EHP control for POLO-ECO plus PREMIUM With the new cleaning pipe POLO-EHP control in the dimensions DN/OD 110 up to DN/OD 200, POLOPLAST once again proves its competence for innovative problem solutions. POLO-EHP control allows the straightforward maintenance, inspection and cleaning of pipework. Conforming to the system, it is made from polypropylene to complement the POLO-ECO plus PREMIUM programme. The success of the POLOPLAST sewage pipe system is founded on intelligent and practical solutions. Long-term stress test Due to the combination of materials used, POLO-ECO plus PREMIUM pipes have high layer adhesion strength and excellent creep rupture strength, coupled with superior abrasion resistance and long-term impermeability. Simple maintenance and cleaning has a name: POLO-EHP control Simple and secure locking device no tools required and easy to release No unpleasant odours due to closed flume sewage system inspection offering all the advantages New, larger aperture of lid opening with an aperture of 100 x 300 mm, maintenance is made easy High internal pressure tightness long term tight up to 1.0 bar, short term up to 1.5 bar Pressure release when unlocking ensures safe handling Constant cross section of discharge flow no change of cross section, therefore no danger of obstruction System and material compatible non-halogen Frost-proof due to superior low-temperature impact strength In tests applying the staircase method, POLO-ECO plus PREMIUM demonstrates that it retains its stress resistance, even at low temperatures C C Dynamic flushing resistance Proof of the dynamic flushing resistance of pipe and socket connection is delivered in accordance with CEN/TR The flushing pressure at the nozzle is 120 (±5) for 25 (50) flushing cycles and a flushing water volume of > 80 l/min. Abrasion resistance POLO-ECO plus PREMIUM offers high reliability due to the impact and abrasion resistant PP material. A load duty of results in an abrasion of only 0.08 mm. This value lies far below the required lower limit.
5 POLO-ECO plus PREMIUM The advantages of POLO-ECO plus PREMIUM POLO-TC () socket system ensures optimal laying reliability while also saving time and costs. Numerous tests and assessments confirm the outstanding quality and practical suitability. Excellent impact and abrasion resistance ensure long-term functional reliability. High chemical resistance secures a long service life. High thermal load capacity facilitates use with high waste water temperatures. Smooth inner pipe surfaces prevent deposits and incrustations and guarantee optimal hydraulic flow behaviour. Extensive range of moulded parts in practical dimensions for customised solutions. 3-layer wall structure performs well even under difficult installation conditions and at increased operational loads.
6 POLOPLAST. A WIETERSDORFER GROUP COMPANY. Copyright. All contents and graphical representations are protected by copyright and, even in altered form, they may only be reproduced, published or distributed following the express written approval of POLOPLAST. 02/10.12/500_EN_wanted.co.at Please refer to our technical manuals. POLOPLAST GmbH & Co KG A-4060 Leonding. Österreich Poloplast-Strasse 1 T +43 (0) F +43 (0) office@poloplast.com
PP MASTERTM S T I F F N E S S S N 1 2 R I N G THE NEW POLYPROPYLENE SEWER PIPE SYSTEM
PP MASTERTM R I N G S T I F F N E S S S N 1 2 THE NEW POLYPROPYLENE SEWER PIPE SYSTEM The future today. PP MASTERTM The new standard in sewer construction. A powerful piece of the future: PP MASTER, a
More informationAlways. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+
Always. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+ The wall sleeve The wall sleeve a largely unnoticed but very important sealing part. Wall sleeves
More informationSIGRAFLEX EMAIL. Properties. Applications
Multilayer sealing sheet, adhesive-free made from flexible graphite foil reinforced with stainless steel foils especially for use in PTFE envelope gaskets SIGRAFLEX EMAIL has been developed specially for
More informationThe surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.
QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered
More information100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes. Summary Technical Report
December 2014 100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes A TEPPFA Project in cooperation with Borealis and LyondellBasell Summary Technical Report (Based on Extracts of
More informationPuddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
More informationHIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
More informationHigh Density Polyethylene Liners for Rehabilitation of Corroded Pipelines
High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines Jeff Schell General Manager United Pipeline Middle East, Inc. Introduction HDPE Liners A cost effective and environmentally beneficial
More informationbuilding applications copper - redefined
building applications copper - redefined copper - redefined The task The development of an innovative tube for the future: economical, environmentally friendly, ecological, completely safe and easy to
More informationDRAINAGE SYSTEMS FOR BEVERAGE INDUSTRIES
DRAINAGE SYSTEMS FOR BEVERAGE INDUSTRIES K E E P I N G U P T H E F L O W S T A I N L E S S S T E E L D R A I N A G E S Y S T E M S BREWERIES & DAIRIES BLÜCHER provides drainage solutions for removing
More informationSPECIFICATION FOR PIPE SUBSOIL DRAIN CONSTRUCTION
SPECIFICATION FOR PIPE SUBSOIL DRAIN CONSTRUCTION 1. SCOPE Pipe subsoil drains shall be constructed in accordance with this specification and in conformity with the lines, grades and cross-sections shown
More informationElastoFlake & ElastoTec
ElastoFlake & ElastoTec Relining Group 02 Revolutionally injection casting ElastoFlake, a new material from the Relining Group, is a polymer plastic mass intended for injection casting, which was developed
More informationPipes and Fittings for Gravity Sewer Mains. SewerMAX
SewerMAX High resistance to tree root intrusion and groundwater infiltration lightweight for ease of installation low embodied energy for environmental benefits long service life Excellent chemical resistance
More informationPLUMBING MAINTENANCE WORK FOR TOILETS IN HEAD OFFICE, SUPPLYCO ESTIMATE
Sl.No. PLUMBING MAINTENANCE WORK FOR TOILETS IN HEAD OFFICE, SUPPLYCO ESTIMATE Description of item Qty Unit Rate Amount 1 Demolishing tile work/cement concrete/( carefully taking out the closet and other
More informationCALEFFI. Compact automatic flow rate regulator with polymer cartridge. 127 series 01166/09 GB
Compact automatic flow rate regulator with polymer cartridge 127 series REGISTERED BS EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01166/09 GB Function The AUTOFLOW devices
More informationU-LINER AC NEW AND UNIQUE ADHESIVE PE-LINER FOR DOMESTIC CONNECTIONS. www.rehau.com. Construction Automotive Industry
U-LINER AC NEW AND UNIQUE ADHESIVE PE-LINER FOR DOMESTIC CONNECTIONS www.rehau.com Construction Automotive Industry NEW ADHESIVE U-LINER AC Modern trenchless renovation and refurbishment processes have
More informationRoyal Seal Gasketed Sewer Pipe
Royal Seal Gasketed Sewer Pipe Royal Seal Gasketed Sewer Pipe Royal Seal gasketed sewer pipe with our specially designed Double Seal Locked-In (DSLI ) gasket is an extremely durable pipe with a leak proof
More informationTHE MINISTRY OF ENVIRONMENTAL PROTECTION, PHYSICAL PLANNING AND CONSTRUCTION
THE MINISTRY OF ENVIRONMENTAL PROTECTION, PHYSICAL PLANNING AND CONSTRUCTION 1389 Pursuant to Article 104 paragraph 1 item 4 of the Waste Act (Official Gazette 178/04, 111/06), the Minister of Environmental
More informationQuality of PVC sewage pipes in the Netherlands
TNO report MT-RAP-2008-01066/mso2 Quality of PVC sewage pipes in the Netherlands De Rondom 1 P.O. Box 6235 5600 HE Eindhoven The Netherlands www.tno.nl T +31 40 265 00 00 F +31 40 265 03 01 info-ient@tno.nl
More informationopti-drän system Keeps your basement and building dry
opti-drän system Keeps your basement and building dry Last modified: January 0 DRAINAGE SYSTEMS ELECTRICAL SYSTEMS BUILDING TECHNOLOGY INDUSTRIAL PRODUCTS Professional building drainage with the opti-drän
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationVacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
More informationBASIS RANGE TMB SERIES
BASIS RANGE SERIES magnetic driven pumps BASIS The pumps belong to Argal s BASIS range and feature, single stage, centrifugal impeller and magnetic drive. The range of pumps includes five models to deliver
More informationSIMONA PP-H Sewer Pipe Systems
Plastics in environmental protection for process sewage SIMONA PP-H Sewer Pipe Systems Areas of use for PP-H AlphaPlus Sewer Pipe Systems Owing to their material properties, such as excellent corrosion
More informationFittings and valves. Ductile cast iron valves. for water and gas supply
Fittings and valves Ductile cast iron valves for water and gas supply 1 Valves made of ductile cast iron Reliable, saf The basis cast iron Düker places emphasis on protection: Quality and a long life cycle,
More informationBKP Berolina Polyester GmbH & Co. KG. Berolina-Liner System Lightspeed in gravity pipe rehabilitation!
BKP Berolina Polyester GmbH & Co. KG Berolina-Liner System Lightspeed in gravity pipe rehabilitation! Berolina-Liner System The Berolina-Liner System sets new standards in pipe rehabilitation. With the
More informationPipe Clamps and Accessories
Products 4.0 Products 4.1 Connection options to pipe clamps with Triple-Thread Connector NT 3G (M16, M10, M8) 4.2 Connection options to pipe clamps with Triple-Thread Connector NT 3G (3/8", M12, M10) 4.3
More informationDRYPOINT AC HP PREMIUM HIGH-PRESSURE DRYING
PREMIUM HIGH-PRESSURE DRYING HIGH QUALITY COMPRESSED AIR FROM BEKO The quality of your compressed air. RELIABLE The highest level of operational reliability is guaranteed with every product that BEKO manufactures.
More informationTECHNICAL NOTE Culvert Sliplining and Lining of Casings with HPPipe
TECHNICAL NOTE Culvert Sliplining and Lining of Casings with HPPipe TN 5.14 February 2010 Introduction It may be at times necessary, in an aging infrastructure, to rehabilitate drainage and sanitary lines
More informationMICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
More informationSKF Seals Knowledge Engineering. Designed to optimize machinery performance
SKF Seals Knowledge Engineering Designed to optimize machinery performance From moulding high quantities to mach Sealing for power transmission The performance and service life of a power transmission
More informationTHE FAST, EASY AND DURABLE PAVING SUPPORT SYSTEM WWW.RYNOSUPPORT.COM
THE FAST, EASY AND DURABLE PAVING SUPPORT SYSTEM WWW.RYNOSUPPORT.COM IDEAL FOR USE IN: Gardens Roof areas, terraces, balconies, greenroofs Structural podium decks Communal/public areas Walkways/wheelchair
More informationNative InDesign 2890 SaniTite Brochure 1/8" 100 300 CMYK April 17, 07
Sanitary Sewer Pipe Tough pipe for a tough environment SaniTite Sanitary Sewer Pipe delivers the features that engineers, contractors and municipalities demand durability, performance, handling, toughness
More informationPlanning Information. Passenger and Freight Elevators.
A company of ThyssenKrupp Elevator Thyssen Aufzüge tk This planning information will give you an overview of the most important planning criteria of passenger and freight elevators. However you should
More informationHigh pressure reactors Where are your limits?
Laboratory equipment High pressure reactors Where are your limits? Modern high pressure reactors need to be technically safe, reliable, economical in use and simple to operate. With Berghof quality and
More informationCavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
More informationThis unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink.
1. Description This unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink. The unit will start automatically. Please pay particular
More informationTechnical Bulletin 1301. Talc in Plastics
Technical Bulletin 131 Talc in Plastics Contents Introduction Benefits of Talc in Polypropylene Compounds 1. Stiffness (E-Modulus) 2. Thermal Conductivity 3. Nucleation 4. Impact Strength 5. Deflection
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More informationAppendix A: Acceptable pipe and fitting materials
Watercare Services Limited Water and Code of Practice Content from the NZS 4404:2010 Land development and subdivision infrastructure has been reproduced for use in the Infrastructure Design s Manual for
More informationNow available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
More informationSKER HUESKER HUESKER geogrid HUESKER HUESKER for HUESKERHUES SKER HUESKER HUESKER HUESKERHUES SKER HUESKER HUESKER HUESKER HUESKER HUESKERHUES
rhuesker HUESKER Fortrac HUESKER HUESKER HUESKER HUESKERr rhuesker Flexible HUESKER HUESKER low-extension HUESKER HUESKER HUESKERr SKER HUESKER HUESKER geogrid HUESKER HUESKER for HUESKERHUES SKER HUESKERHUES
More informationSEWERS FOR ADOPTION 6 PIPE MATERIALS TABLE AND CONDITIONS OF USE VERSION 4 March 09
SEWERS FOR ADOPTION 6 PIPE MATERIALS TABLE AND CONDITIONS OF USE VERSION 4 March 09 Foul and Storm Lateral Drains (100 & 150 mm Diameters) Pumped Storage General Exceptions General Exceptions General Exceptions
More informationPremium Conventional. General Tire Information. High quality; low operating cost. Pneumatic ride in extreme conditions.
Tire and Overview Premium Conventional 185-9932 254 mm (10 419 mm (16.5 185-9933 304 mm (12 419 mm (16.5 High quality; low operating cost. Skid Steer Loader Tires 5436 XD 222-3962 254 mm (10 419 mm (16.5
More informationSECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION
SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION PART 1 GENERAL.01 SECTION INCLUDES Furnishing and installing 4 inch through 16 inch high density
More informationWhen Safety Comes First. Emergency Safety Shower and Eye Wash Catalogue
When Safety Comes First Emergency Safety Shower and Eye Wash Catalogue No industry, irrespective of its size or its function, can afford to neglect the safety of its personnel and the general public. Advances
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationPlastics Engineering SYSTEM BEKAPLAST. Mechanically anchored thermoplastic lining for extreme conditions
Plastics Engineering SYSTEM BEKAPLAST Mechanically anchored thermoplastic lining for extreme conditions Beka_Gesamt_en 2014.indd 1 System BEKAPLAST Mechanically anchored lining systems to meet the highest
More informationSMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
More informationVdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
More information27 July 2009 I 54-1.65.25-63/08. Klenk GmbH Eichelstraße 15, D-88285 Bodnegg-Rotheidlen
General Technical Approval German Institute for Construction Engineering PUBLIC-LAW INSTITUTION Approval body for construction products and types of construction German Construction Industry Inspection
More informationInjection molding equipment
Injection Molding Process Injection molding equipment Classification of injection molding machines 1. The injection molding machine processing ability style clamping force(kn) theoretical injection volume(cm3)
More informationRidgistorm-XL - the latest innovative
Ridgistorm-XL - the latest innovative solution to SUDS and stormwater management Combined with the technical expertise, knowledge and support of Polypipe, Ridgistorm-XL is designed as a bespoke application
More informationWATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
More informationDiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationproduces and delivers products worldwide can provide the optimal are dedicated to supplying you with superior advice and global support.
www.ppcinsulators.com The very Best. The very Best. That s what we deliver. ong od Insulators Only a company that develops, produces and delivers products worldwide can provide the optimal solution for
More informationNylon 612: Viable Alternative Tubing Constructions in Fuel Systems
Nylon 612: Viable Alternative Tubing Constructions in Fuel Systems ITB Automotive Energy Storage Systems 2013 Novi, MI March 6-7, 2013 FAST FORWARD YOUR INNOVATION TM A. Schulman A Global Solutions Provider
More informationWhen Safety Comes First. Emergency Safety Shower and Eye Wash Catalogue
When Safety Comes First Emergency Safety Shower and Eye Wash Catalogue No industry, irrespective of its size or its function, can afford to neglect the safety of its personnel and the general public. Advances
More informationREHABILITATION OF UNDERGROUND SEWER LATERAL PIPES WITH CURED-IN-PLACE-PIPE LINER SECTION 02542
1.0 INTENT REHABILITATION OF UNDERGROUND SEWER LATERAL PIPES 1.01 It is the intent of this specification to provide for the reconstruction of pipelines and conduits by the installation of a resin-impregnated
More informationMechanical shaft seal types and sealing systems
Chapter 2 Mechanical shaft seal types and sealing systems 1. Mechanical shaft seal types 2. Sealing systems 3. Selecting a mechanical shaft seal Mechanical shaft seal types and sealing systems 1. Mechanical
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationTableting Punch Performance Can Be Improved With Precision Coatings
Tableting Punch Performance Can Be Improved With Precision Coatings by Arnold H. Deutchman, Ph. D. Director of Research and Development (614) 873-4529 X 114 adeutchman@beamalloy.net Mr. Dale C. Natoli
More informationh Sewer Pipe Systems
h Sewer Pipe Systems 2 h Sewer Pipes Innovative Manufacturing Process The first industrial application for HOBAS Pipes was as penstocks for hydroelectric power stations in the 1960s. It was not however
More informationSewer network renovation using glass-fiber reinforced (GRP) pipe liners
Sewer network renovation using glass-fiber reinforced (GRP) pipe liners The BONEX method 1./ Antecedents Several hundred or thousand kilometers is the total length of the communal and industrial sewer
More informationMultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
More informationThe most advanced Undersink Sullage System with inbuilt controls and alarms.
Optional Interlock Panel The most advanced Undersink Sullage System with inbuilt controls and alarms. The Aquatec Sinktec Sullage System is used to handle sink and basin waste in circumstances where gravity
More informationEuropean Technical Assessment ETA-15/0028 of 23/02/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationGrooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
More informationX Planning X Quality X Maintenance & Operations
Delaware Department of Transportation Division of Transportation Solutions Design Guidance Memorandum Memorandum Number 1-20 Revised 1. Road Design Manual 2. Bridge Design Manual 3. Utilities Design Manual
More informationAluminium as Construction Material in Ammonia Refrigeration Cycles
Aluminium as Construction Material in Ammonia Refrigeration Cycles Experiences With Aluminium Compared to other metals, aluminium has only a brief history as an engineering material. While, about 150 years
More informationCAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
More informationCCU Engineering Specifications. Section 003300 PRECAST CONCRETE PRODUCTS
CCU Engineering Specifications Section 003300 Effective Date: Nov. 1st, 2011 Page 1 of 5 PRECAST CONCRETE PRODUCTS PART 1 - GENERAL The following specification is intended for use for the design, selection
More informationEmergency safety showers Part 3: Body showers for production and logistic sites
Date: 2008 February DIN 12899-3 Emergency safety showers Part 3: Body showers for production and logistic sites Sicherheitsnotduschen Teil 3: Körperduschen für Betriebe und Umschlaganlagen Douches de sécurité
More informationKnauf Aquapanel Interior. Tile Backing. Cement board for wet areas. Will not deteriorate in water. Easy to score and snap
Tile Backing Will not deteriorate in water Easy to score and snap Resistant to mould and mildew Knauf Aquapanel Interior Cement board for wet areas Knauf Aquapanel Interior Cement Board Drywall for Wet
More informationS4 - Top Hung Window. Outside view. Inside view. Interior frame. Exterior frame. Glazing Panel
S4 - Top Hung Window Outside view Inside view Interior frame Exterior frame Glazing Panel Dometic Seitz GmbH 1 S4-Top Hung Window.doc Exterior frame End cap Sealing rubber between exterior frame and wall
More informationThe Worcester Greenstar System Filter. An innovative solution for reducing system contaminants
The Worcester Greenstar System Filter An innovative solution for reducing system contaminants Protect your customer s heating system with the Greenstar System Filter Modern condensing boilers are precision
More informationWhite Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit?
Recommendations for Installing Flash LEDs on Circuits By Shereen Lim White Paper Abstract For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex
More informationLiner system design for tailings impoundments and heap leach pads
Liner system design for tailings impoundments and heap leach pads John F. Lupo, Ph.D., P.E. AMEC E&E TAILINGS & MINE WASTE 08, VAIL Liner Systems Liner systems Environmental containment of process solutions
More informationEuropean technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationOil and Gas Pipeline Design, Maintenance and Repair
Oil and Gas Pipeline Design, Maintenance and Repair Dr. Abdel-Alim Hashem Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering Cairo University aelsayed@mail.eng.cu.edu.eg
More informationlaboratory glass bottles and screw caps
LABWARE SCHOTT DURAN E SCHOTT DURAN laboratory glass bottles and screw caps - Rely on the original! - SCHOTT DURAN laboratory glass bottles Fields of application and properties The outstanding properties
More informationIntegrated Manhole Ladder System
Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete
More informationInstallation and Service Instructions. Neutralization System Part no. 7441823 Grünbeck part no. 410480
Installation and Service Instructions for use by heating contractors Neutralization System Part no. 7441823 Grünbeck part no. 410480 Safety and Installation Requirements Please ensure that these instructions
More informationImproved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process
Improved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process Lynne Michaelson, Krystal Munoz, Jonathan C. Wang, Y.A. Xi*, Tom Tyson, Anthony Gallegos Technic Inc.,
More informationCerobear Spindle Bearings for Machine Tool Applications
Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings About CEROBEAR Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in
More informationrhuesker HUESKER HUESKER HUESKER HUESKER HUESKERr HUESKER HUESKER HUESKER HUESKERHUES Product- Portfolio HUESKER Engineering with Geosynthetics
HUESKER Engineering with Geosynthetics rhuesker HUESKER Product- HUESKER HUESKER HUESKER HUESKERr SKER HUESKER Portfolio HUESKER HUESKER HUESKER HUESKERHUES Engineering with Geosynthetics HUESKER Synthetic
More informationModule 3: Sewer Material Lecture 3: Sewer Material
Module 3: Sewer Material Lecture 3: Sewer Material [NPTEL, IIT Kharagpur, Prof. M.M.Ghangrekar, Department of Civil Engineering Page 1 3.0 SEWER MATERIAL 3.1 Important Factors Considered for Selecting
More informationFluid Mechanics: Static s Kinematics Dynamics Fluid
Fluid Mechanics: Fluid mechanics may be defined as that branch of engineering science that deals with the behavior of fluid under the condition of rest and motion Fluid mechanics may be divided into three
More informationTerminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
More informationMold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
More informationWTW SWANTM. Linear slot air diffusers of wall-to-wall design for ceilings
SWANTM WTW Linear slot air diffusers of wall-to-wall design for ceilings Quick facts Wall-to-wall installation Diffuser face of light aluminium design 2, 3 or slots Horizontal/vertical air distribution
More informationRecent Advances in Rubber Roll Covers for Improved Paper Machine Performance and Reduced Energy Requirements
Recent Advances in Rubber Roll Covers for Improved Paper Machine Performance and Reduced Energy Requirements Dilip De, Ph.D. Research and Product Engineering Charles Hunter, Ph.D. Research and Product
More informationRobot Welding Torch System
T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly
More information