Pac III. Single Gas Detection Instruments

Pac III. Single Gas Detection Instruments ST-179-98

Pac = Personal Air Control only one unit for selection of a sensor from the extensive range of DrägerSensors suitable for measuring different toxic gases and oxygen sturdy, pocket-sized, interference-immune housing measuring and warning with Pac III B and Pac III S, additional documentation with Pac III E

Pac III is an intelligent and versatile single-gas detection instrument for measuring toxic gases and vapors, which offers the following features: plug-in, intelligent electrochemical DrägerSensors low maintenance two freely adjustable alarm limits TRGS 402 monitoring (Pac III E) integrated datalogger and PC connection (Pac III E) The unit comes in three versions: 1. Pac III B is the basic version for the common gases CO, H 2 S and O 2. Its basic functions cover all routine tasks. 2. Pac III S is the standard version for measuring toxic gases or oxygen. Its versatile range of setting options means that this unit can easily be adapted to suit all measurement tasks. 3. Pac III E is the extended version. In addition to continuous measurement and, if necessary, warning, Pac III E enables evaluation of the measured data as per TRGS 402 and documentation with its integrated datalogger, which can store up to 8000 measured values or events. Using GasVision, our Windows - compatible software, data can be transferred to a PC for clear docu-mentation and display. It is your job as user to check the hazard area in a quick and reliable manner. The system s high degree of flexibility really comes into its own in the chemical industry. Simply by replacing the sensor (or switching the preset gas type in the sensor), you can change from one gas type to another. The petrochemical industry will particularly benefit from the H 2 S sensor which boasts a quick response time and is available in two measurement ranges. The broadband OV sensor enables firefighters to detect gases and vapors quickly and reliably, without the need to change the sensor. What is more, when used with a CO sensor in the metal processing industry, Pac III stands out thanks to its simple handling and extreme robustness. Further features which all versions share: display illumination at the push of a button extremely loud audible alarm signal (> 85 dba, 30 cm) clearly visible red alarm light can be used with either alkaline, 1) zinc charcoal or lithium battery, or with rechargeable battery many other configurations possible through individual setting options full range of accessories for every conceivable measurement task ST-386-98 1) only with XS 2 and PacSensor II 4

Individual adaptation With its high level of versatility, Pac III is able to meet many individual requirements. Benefits: If different gas hazards need to be measured, a number of different electrochemical sensors can be kept ready at hand and then simply connected to the device as needed. Future-oriented The flexibility of this measurement system guarantees compatibility with future extensions like new sensors or other accessories. Gas intake Gas intake can take place by diffusion or by using an external pump. Benefits: intake of air from ducts, shafts or ships holds is possible up to a distance of 45 m the pump is monitored and an alarm given in the event of insufficient flow Display Full graphics display with point-matrix display. Benefits: menu-guided operation display of graphic symbols Housing The housing is designed to withstand extremely tough environmental conditions. Benefits: - the unit does not have to be carried continuously but can be placed in a stable upright position without the risk of the device falling over and being damaged. - the unit will withstand being dropped. - the unit can be placed in puddles or heavy rain without malfunctioning. ST-372-98 ST-371-98 ST-373-98 5

Order List Pac III B (basic version) without Alkaline T4 supply unit, sensor, program, battery Pac III B CO 83 14 030 Pac III B H 2 S 83 14 031 Pac III B O 2 LS 83 14 032 Pac III S (standard version) 83 13 650 basic unit without datalogger and special alarms (TRGS evaluation), sensor, supply unit and language version Pac III E (extended version) 83 13 653 incl. datalogger and special alarms (TRGS evaluation), but without sensor, supply unit and language version. The above Pac III units are only complete and form a functional unit if one item from each of the following categories 1-3 is selected. 1. Supply unit Alkaline supply unit T4/T6, 45 30 352 without 9 V battery Alkaline-lithium supply 45 30 350 unit T4, without battery Rechargeable battery unit, 45 30 348 9 V zinc charcoal battery T6, approved 83 13 656 9 V lithium battery T4, approved 64 08 026 2. DrägerSensors XS Electrochemical DrägerSensors XS EC (with extended calibration periods, warranty: up to 36 months) O 2 -LS 0-25% by vol. 68 09 130 CO 1) 0-500 ppm 68 09 105 H 2 S 100 0-100 ppm 68 09 110 H 2 S 500 0-500 ppm 68 09 180 NO 0-100 ppm 68 09 125 NO 2 0-20 ppm 68 09 155 1) SO 2 0-20 ppm 68 09 160 NH 3 0-300 ppm 68 09 145 HCN 0-50 ppm 68 09 150 Cl 2 0-10 ppm 68 09 165 OV 0-50 ppm 68 09 115 OV-A 0-50 ppm 68 09 522 Amines 0-100 ppm 68 09 545 Hydrazine 0-3 ppm 68 09 190 Hydrazine D 0-3 ppm 68 10 295 Hydrides 0-1 ppm 68 09 135 PH 3 500 0-500 ppm 68 09 535 CO 2 0-5% by vol. CO 2 68 09 175 THT 0-100 mg/m 3 68 09 195 H 2 0-2000 ppm 68 09 185 Mercaptan 0-40 ppm 68 09 200 H 2 O 2 0-20 ppm 68 09 170 1) incl. integrated selective filter available on request Electrochemical XS 2 and PacSensors II O 2 -LS 0-25% by vol. 68 10 375 CO 0-2000 ppm 68 10 365 H 2 S 0-100 ppm 68 10 370 CO 2 0-5% by vol. 68 09 075 1-263-95 ST-731-97 2-112-96 ST-370-98 Cl 2 0-10 ppm 68 09 065 Phosgene 0-3 ppm 68 08 582 Special calibrations on request Gas type sticker CO, gray 68 08 824 H 2 S, yellow 68 08 814 O 2, blue 68 08 834 Sensor station 64 08 147 Transport potentiostat to warm up the electrochemical sensors 3. Programs incl. language version Standard version English 83 13 700 (for Pac III S) Extended version English 83 13 720 (for Pac III E) Other languages on request Charging accessories Multi-charger 83 14 035 comprising: twin charger/ interface for charging of two Pac III units, or as interface for one Pac III unit, without wall holder/ RS 232 cable; additionally required: Power pack to operate 12 twin chargers/interfaces 83 10 558 Plug-in charger 100-240 VAC 83 15635 to operate a twin charger/interface Single charger/interface 45 30 052 without wall holder/ RS 232 cable Wall holder 45 30 261 (for single charger) Connecting cable 83 14 179 to line up 2 single chargers, for operation of 2 single chargers with one plug-in charger alternatively required: 100-240 VAC plug-in charger 83 15 635 Car adapter 45 30 057 Other accessories Hand-held pump 68 01 933 Telescopic probe 83 13 025 (extendable) Grist probe 68 05 880 SmartPump 83 13 832 S-9-97 ST-384-98 1-277-95 2-372-95 2-108-96 ST-382-98 6

Calibration adapter 68 06 291 this adapter is also required to operate a pump or probe Leather bag, robust 64 08 001 2-109-96 Leather bag, with shoulder strap 83 14 178 Float probe 68 02 337 Electrically conductive 11 80 681 hose, not for H 2 S (per meter) Viton hose, 12 03 150 solvent-resistant, also for H 2 S (per meter) Float probe 68 07 097 (incl. 10 m hose) GasVision 83 14 034 (evaluation software Multiwarn II/Pac III) Software license for 83 14 034 83 14 099 (license for a second evaluation PC) RS 232 interface cable 64 08 257 (9-pole plug to 9-pole plug, incl. adapter 9 to 25-pole) Ampliwarn II 36 02 651 alarm amplifier, plus Adapter for 1 Pac III 36 02 426 Charger 220 V 36 02 669 (additionally required) Wear and tear parts Sensor cap incl. washer 45 30 048 External dust filter 68 08 244 not for units with THT, Mercaptan, Cl 2, H 2 O 2, COCl 2 and OV-A sensors External selective filters for Pac III with PacSensors II Selective filter AP (H 2 S, etc.) for Pac III CO 68 06 880 Selective filter DP (alcohol, etc.) for Pac III CO 68 06 135 Selective filter BP (H 2 S, etc.) for Pac III NO 68 08 044 Selective filter CP (NO) for Pac III NO 2 68 08 315 Internal filters for DrägerSensors XS EC (not shown) Selective filter D3T 68 09 022 (H 2 S, etc.) for XS CO sensor Selective filter B2T 68 09 198 (H 2 S, SO 2 ) for XS THT sensor pack of 5 filters Selective filter K1T on request (H 2 S) for XS SO 2 sensor Selective filter KP/S 68 08 593 for Pac III COCl 2 (against H 2 S, HCl, HCN, Cl 2 ) 2-111-96 S-17-97 Datei 2-364-95 ST-386-98 S-13-97 7

Technical Data ST-413-98 Dimensions (W x H x D) Weight Power supply Display Alarms Pac III 66 x 110 x 32 mm 185 g rechargeable battery (200 hours without alarms) 9 V zinc charcoal battery (400 hours without alarms), 9 V alkaline battery (600 hours without alarms), Lithium battery (1100 hours without alarms) with O 2 sensor approx. half the time digital - measured data - error - alarms - STEV/TWA - overrange visual and audible (> 85 db(a)) - 2 MAK alarms - TRGS 402 alarm - Low Bat - device failure Datalogger 8000 measured values Outputs Expected sensor service life digital up to 3 years Ambient conditions during operation -20 C...+55 C T4 1) -20 C...+40 C T6 700 hpa-1300 hpa 10-95% r.h. Ex approval intrinsic safety CENELEC BVS EEx ia IIC T4/T6 EEx ia I 1) Between +40 C and +50 C the sensor service life is reduced and the probability of a measurement error increases only with Pac III E (extended version) 8

Dräger Safety AG & Co. KGaA Revalstrasse 1 D-23560 Luebeck Germany Tel. +49 451 882-0 Fax +49 451 882-20 80 www.draeger-safety.com DrägerService Dräger equipment must always be fully operational and safe. DrägerService offers a regular inspection service and isquickly available in the event of malfunction. Your equipment will be repaired and back in operation as quickly as possible. Dräger- Service facilitates the vital flow of information between client and manufacturer. Dräger Expertise Since 1889, Dräger has had an outstanding reputation for solving problems in the field of human breathing. Dräger has been deeply involved in the handling of gases, in particular hazard protection and the saving of life in medical and industrial emergencies. Many of the company's 9400 employees are active in research and innovation to ensure that the latest techniques and scientific advances are fully tested before their inclusion in new equipment. Quality and Environmental Management Our mission includes the continuous improvement of our Quality and Environmental Management Systems in accordance with ISO 9001 and ISO 14001. Dräger Worldwide The Dräger sales and service organisation is spread throughout the world. It comprises more than 25 subsidiaries and associated companies to ensure that Dräger is always within easy reach of its clients and in close contact with all important markets. Dräger's ever increasing market share demonstrates the company's international competitiveness and strength. Dräger has subsidiaries in the following countries: Australia, Austria, Belgium, Bulgaria, Canada, China, Croatia, Czech Republic, Denmark, France, Great Britain, Hungary, Indonesia, Italy, Japan, the Netherlands, Norway, Romania, Singapore, Slovenia, Slowakia, South Africa, Spain, Sweden, Switzerland, Thailand, Yugoslavia, USA. Additionally, Dräger is widely represented in Central and South America, Africa, the Middle East, the Far East and Eastern Europe. 90 45 914 / PGB / 032 / H-NR-ED / Market communications ST / Printed in Germany / Chlorinefree ecological / Subject to modifications.