SystemairCAD version 2011-11.01.B1 Introduction and important information Web updating of SystemairCAD... 2 Info to Windows 7 users... 3-4 How to install SystemairCAD... 5 Distributor version with prices... 5-7 Consultant version without price... 8 What is new in SystemairCAD... 9-14 Warranty conditions for DV and TIME... 15 NOTE: The prices are not changed, the only change in the pricelist is new prices for the new functions and changes in the program. 18-03-2013 Page 1
Web updating of SystemairCAD. The update of SystemairCAD is possibly to do just like other programs. This means that you don t have to uninstall and install the program every time we send out new versions. If we have made an update of the program you will see the dialog box below. When you click Yes (Danish Ja ) the program is automatically updated and ready to use with the new feature. As a new thing, you have to choose your market location when you install this update. With the next update, this will not be necessary. The only thing we don t make as web update is price changes This will always be made via an informational E-mail with a new price database attached. 18-03-2013 Page 2
Info to Windows 7 users If you have windows 7 installed on your computer and you don t have the full rights of the computer, you might have problems with using the pdf printout. Then you have to press the options tab and then select folders. This box will appear and now you press this button. Then you select your personal folder and documents in your personal folder. Finally you should get a result that looks a little like this. 18-03-2013 Page 3
When you are using Windows 7, you might find out that it can be difficult to update SystemairCAD if you don t have the administrator rights of your computer. If this occurs you can try to open and run the program as administrator. You need to right click on the Systemair logo and then choose run as an administrator that should do the job and let you update the programme. 18-03-2013 Page 4
How to install SystemairCAD SystemairCAD is available in 2 versions, one for distributors and one for consultants. Distributor version with prices The version for distributors includes prices and is available for distributors on www.systemaircad.dk where a user name and password is needed to access the zip-file for download. The user name and password to access the program is issued earlier for all current distributors. If for some reason you have forgotten the password, you can contact Systemair Denmark. After login, the following screen will appear and you should click download to save the zip-file on your computer. NOTE: If pop-up window does not appear when you click download, hold down the ctrl button on your keyboard while clicking download. This will overwrite the build in command to not allow pop-up windows. 18-03-2013 Page 5
When you have downloaded the zip-file, unzip the downloaded zip-file and install the program. 18-03-2013 Page 6
IMPORTANT: If you want to save your customer database, you should copy it from your current SystemairCAD folder before installing the new version. The file is named DnCust.db and can be found here: C:/program files/systemair/systemaircad or C:/programs/Systemair/systemaircad depending on your local setup: After installation of new version, you can place the file in the same folder and overwrite the empty customer database installed with the new version. 18-03-2013 Page 7
Consultant version without price The consultant version without price, is available on www.systemair.com, Systemair products, Download, Software tools and SystemairCAD. Here the users have to register before being able to access the program. 18-03-2013 Page 8
What is new in SystemairCAD 2011-11.01.B1 1. Duct connection dimensions in the printout. 2. New info in printout for valves. 3. Removal dampers in the DVP section. 4. New dampers in DV unit. 5. VDI 6022 in TIME unit. 18-03-2013 Page 9
1. Duct connection dimensions in the printout. It is now possible to see the duct connection dimensions on the printout. 2. New info in printout for valves. When you select a valve for a coil, you can now see in the printout what type of connection the valve has. 18-03-2013 Page 10
3. Removal dampers in the DVP section. It is now possible to remove the supply and/or extract damper in the DVP section. 18-03-2013 Page 11
4. New dampers in DV unit. The dampers in the DV unit will now change to fullface dampers, just like they are on the TIME unit. With this change it will no longer be possible to select the dampers mounted outside the unit, now they will always be inside. 18-03-2013 Page 12
5. VDI 6022 in TIME unit. It is now possible to select the TIME unit as a hygienic version. The hygienic certification is called VDI 6022 and you can see the certificate on the next page. You can make the selection in the select unit type box or in the more unit data box placed under the unit data tab. 18-03-2013 Page 13
18-03-2013 Page 14
Warranty conditions for DV and TIME Standard warranty: We deliver according to Orgalime S2000, which includes 1 year warranty. Extended warranty: Provided Systemair s recommended maintenance and service program is followed and documented, an extended warranty of up to 4 years is granted: Unit casing (panel, frames and corners) 4 year anti-perforation corrosion warranty Control elements (electrical elements) 2 year Heat exchangers, motors, coils and dampers 2 year General conditions: Systemair s recommended maintenance and service program is followed and documented. Extended warranty only includes delivery of spare parts, but not installation costs. Start of warranty period is time of delivery given on the order confirmation. 18-03-2013 Page 15