It is a simple as ABC: A Black Cable = A Better Cable Better Technology = Better Sound
Like you, we believe that listening to music should be fun, right? And that is why we have created a line of cables using a better technology, to give you a better sound, it is called Sound Waves Solid Copper Conductor Technology Basically, it consists of a polyethylene core around which a number of individually insulated solid pure copper conductors are bundled. Each solid pure copper conductor has a precise diameter of 0.6mm. For more information do have a look at the Specifications page. Why the name Black Cable? All Black Cable models have a little bit of Black Magic added to the theoretical perfect design to make them just a little bit better for you, the listener. From the perspective of the world of colors, we know that black is not a color, e.g. in the rainbow you will not see black. That is another reason why the name Black Cable was chosen, all Black Cable designs are not colored as well, that is sound wise. History of Black Cable After having gone through all the theoretical knowledge, we knew we were right when we said that if you want a (very) good cable at a fair price, then there is really only one option: Solid Pure Copper Conductors. Once the designs were ready for production we turned to the country which has an enviable reputation for reliability and thoroughness: Germany. Fortunately, we were able to find a manufacturer who could live up to our quality requirements, so you get a better cable, Made in Germany. Theory was put into practice and cables were made to our specific designs, using a solid pure copper conductor with a precise diameter of 0.6mm, to which we listened. Result: we were pleasantly surprised as well as proud of the cable designs. How and where to use Black Cable? Our cables are flexible enough to be used between your loudspeakers and amplifier for your Hi-Fi, yet also stiff enough to be used in-wall for your Home Theater. Can Black Cable surprise you? Yes of course, you can be pleasantly surprised as well. How? Just go to one of our dealers, have a listen and let yourselves be persuaded into buying a Black Cable, Made in Germany.
MAIN loudspeaker cable The Main loudspeaker cable is a simple, yet high quality cable, to give you a wonderful sound. You want better dynamic contrast and clarity? - Main uses a circular-spiral design which optimizes the basic electrical values capacitance and inductance. So you get better dynamic contrast and clarity. You want a clear, clean and dynamic sound? - Main uses solid pure copper conductors which prevent strand interaction, a major source of distortion. - Main has a particular 0.6 mm diameter for its solid pure copper conductors which keep the skin-effect out of the audio range and by using this particular diameter the distortion will be well below the threshold of the audible distortion. - Main has a precise (2 x 4) number of solid pure copper conductors in order to reduce the audibility of any distortion. - Main has identical conductors for the positive and return sides. - Main uses our special non-woven taping to dampen spurious vibrations. So, thanks to the best technology, you get a clear, clean and dynamic sound. You want dimensionality? - All solid pure copper conductors are individually insulated with solid polyethylene so as to dampen distortion being fed back into the amplifier. So you get dimensionality. Thanks to the full range design as well as the precise (2 x 4) number of strands you will get a wonderful and rich sound. Especially when used with: - Integrated amplifiers and bookshelf loudspeakers.
NECKAR loudspeaker cable The Neckar loudspeaker cable is a normal round cable with a refined design and fully optimized with a sophisticated balance of qualities, to give you an allround loudspeaker cable. You want really better dynamic contrast and clarity? - Neckar uses a circular-spiral design which greatly optimizes the basic electrical values capacitance and inductance. So you get really better dynamic contrast and clarity. You want a really clear, clean and dynamic sound? - Neckar uses solid pure copper conductors which prevent strand interaction, a major source of distortion. - Neckar has a particular 0.6 mm diameter for its solid pure copper conductors which keep the skin-effect out of the audio range and by using this particular diameter the distortion will be well below the threshold of the audible distortion. - Neckar has a generous (2 x 6) number of solid pure copper conductors in order to really reduce the audibility of any distortion. - Neckar has identical conductors for the positive and return sides. - Neckar uses our special non-woven taping to dampen spurious vibrations. So, thanks to the best technology, you get a really clear, clean and dynamic sound. You want better dimensionality? - All solid pure copper conductors are individually insulated with solid polyethylene so as to dampen distortion being fed back into the amplifier. So you get better dimensionality. Thanks to the full range design as well as the generous (2 x 6) number of strands you will get a homogenous, balanced and wide-ranging sound. Especially when used with: - Integrated amplifiers and bookshelf loudspeakers and/or - Separates for the amplification together with bookshelf or floor standing loudspeakers.
RHEIN loudspeaker cable Rhein builds on the qualities of the Neckar loudspeaker cable design and has three yarns of Polyolefin with multi-filaments as well as our unique counter-spiraling design to give you the best all-round loudspeaker cable. You want significantly better dynamic contrast and clarity? - Rhein not only uses a normal circular-spiral design but also our unique counterspiraling design so the basic electrical values capacitance and inductance are optimized like never before. So you get significantly better dynamic contrast and clarity. You want an exceptionally clear, clean and dynamic sound? - Rhein uses solid pure copper conductors which prevent strand interaction, a major source of distortion. - Rhein has a particular 0.6 mm diameter for its solid pure copper conductors which keep the skin-effect out of the audio range and by using this particular diameter the distortion will be well below the threshold of the audible distortion. - Rhein has identical conductors for the positive and return sides. - Rhein has an optimized (2 x 8) number of solid pure copper conductors in order to significantly reduce the audibility of any distortion. - Rhein uses our special non-woven taping to dampen spurious vibrations. So, thanks to the best technology, you get an exceptionally clear, clean and dynamic sound. You want 3D dimensionality? - All solid pure copper conductors are individually insulated with solid polyethylene so as to dampen distortion being fed back into the amplifier. - Rhein uses extra special Sound Waves conductors, 3 yarns of Polyolefin of multifilaments, so as to dampen even the smallest micro-vibrations, thanks to its low surface energy. So you get 3D dimensionality. Thanks to the complete full range design as well as the optimized (2 x 8) number of strands you will hear all of the high level music with dynamic peaks in absolute precision; in short you will get a Symphony of Sound. Especially when used with: - Integrated amplifiers and bookshelf loudspeakers and/or - Separates for the amplification together with bookshelf or floor standing loudspeakers and/or - The best amplifiers and loudspeakers.
DONAU interconnect cable The Donau interconnect cable is a normal round cable with a refined design and a sophisticated balance of qualities to give you an all-round interconnect cable. Of course, a Radio-Frequency shielding is featured for those who live in areas where there is (too much of) Radio-Frequency interference. You want really better dynamic contrast and clarity? - Donau uses a circular-spiral design which greatly optimizes the basic electrical values capacitance and inductance. So you get really better dynamic contrast and clarity. You want a really clear, clean and dynamic sound? - Donau uses solid pure copper conductors which prevent strand interaction, a major source of distortion. - Donau has a particular 0.6 mm diameter for its solid pure copper conductors which keep the skin-effect out of the audio range and by using this particular diameter the distortion will be well below the threshold of the audible distortion. - Donau has a precise (2 x 2) number of solid pure copper conductors in order to reduce the audibility of any distortion. - Donau has identical conductors for the positive and return sides. - Donau uses our special non-woven taping to dampen spurious vibrations. So, thanks to the best technology, you get a really clear, clean and dynamic sound. You want better dimensionality? - All solid pure copper conductors are individually insulated with solid polyethylene so as to dampen distortion. So you get better dimensionality. Thanks to the refined design as well as the precise (2 x 2) number of strands you will hear all of the high level music with dynamic peaks in precision, naturally. Especially when used with: - Integrated amplifiers and bookshelf loudspeakers and/or - Separates for the amplification together with bookshelf or floor standing loudspeakers and/or - The best amplifiers and loudspeakers.
Ruhr Power Cords The Ruhr Power Cords are sophisticated high quality cables giving your electronics the AC they are entitled to. Ruhr 18 Ruhr 47 You are only satisfied with the best technology resulting in an astonishing clarity? - Design wise, the Ruhr Power Cords have both the hot and neutral conductors spiraling around the inner group of ground wires. The relationship between the hot and neutral groups is fixed and non-changing, contributing to one of Black Cable s most basic design qualities: consistency. So, thanks to the best technology, you get an astonishing clarity. You want a significantly better dynamic contrast? - As with all other Black Cable models the Ruhr Power Cords use solid pure copper conductors with a particular 0.6 mm diameter. This prevents strand interaction, a major source of distortion. - Copper quality is critical because a conductor can be considered a rail-guide for both the electric fields within a conductor and for the magnetic fields outside the conductor. - The purity of the solid pure copper conductors minimizes distortion as well as eliminates harshness and greatly increases clarity. So, thanks to the best technology, you get a significantly better dynamic contrast. You want an exceptionally clear, clean and dynamic sound? - The Ruhr Power Cords use solid polyethylene insulation on both its hot and neutral conductors because polyethylene not only is low-loss but also has an easy-on-the-ear distortion profile. Thanks to the solid polyethylene insulation, the Ruhr Power Cords have a lot less of the out-of-focus effect that you will hear with other insulation materials. - The Ruhr Power Cords have identical conductors for the hot and neutral sides. - The Ruhr Power Cords use our special non-woven taping to dampen spurious vibrations. So you get an exceptionally clear, clean and dynamic sound. You want 3D dimensionality? - All solid pure copper conductors are individually insulated with solid polyethylene so as to dampen distortion. So you get 3D dimensionality. What are the differences between the two Ruhr models? - Ruhr 18 uses a precise (2 x 5) number of solid pure copper conductors. This model is especially suited for use with integrated amplifiers, pre-amplifiers or sources. - Ruhr 47 uses an optimized (2 x 13) number of solid pure copper conductors. Additionally it features our unique counter-spiraling design. This model is especially well suited for use with power amplifiers.
SPECIFICATIONS Interconnect Power Cords Donau Ruhr 18 Ruhr 47 Cable diameter 5 mm 9 mm 13 mm Number of solid pure copper conductors 2 x Black 2 x White 5 x Brown (hot) 5 x Blue (neutral) 13 x Brown (hot) 13 x Blue (neutral) Sound Waves Solid Copper Conductor Technology 0.6 mm diameter solid pure copper conductor Solid Polyethylene conductor insulation Soft PVC outer cable insulation, RoHS compliant Taping, non-woven material Symmetrical design Counter-spiraling design Miscellaneous RF shielding Ground 1.5mm² Ground 2.5mm² For more information, do visit our website WWW.BLACKCABLE.DE
SPECIFICATIONS Loudspeaker cables Main Neckar Rhein Cable diameter 6 mm 7 mm 8 mm Number of solid pure copper conductors 4 x Black 4 x White 6 x Black 6 x White 8 x Black 8 x White Sound Waves Solid Copper Conductor Technology 0.6 mm diameter solid pure copper conductor Solid Polyethylene conductor insulation Soft PVC outer cable insulation, RoHS compliant Taping, non-woven material Symmetrical design Counter-spiraling design Miscellaneous Multi-core design For more information, do visit our website WWW.BLACKCABLE.DE
SPECIFICATIONS Loudspeaker cables Interconnect Power Cords Main Neckar Rhein Donau Ruhr 18 Ruhr 47 Cable diameter 6 mm 7 mm 8 mm 5 mm 9 mm 13 mm Number of solid pure copper conductors 4 x Black 4 x White 6 x Black 6 x White 8 x Black 8 x White 2 x Black 2 x White For more information, do visit our website WWW.BLACKCABLE.DE 5 x Brown (hot) 5 x Blue (neutral) 13 x Brown (hot) 13 x Blue (neutral) Sound Waves Solid Copper Conductor Technology 0.6 mm diameter solid pure copper conductor Solid Polyethylene conductor insulation Soft PVC outer cable insulation, RoHS compliant Taping, non-woven material Symmetrical design Counter-spiraling design Miscellaneous Multi-core design RF shielding Ground 1.5mm² Ground 2.5mm²