VOICE EVACUATION SYSTEM QX000 SERIES Description Mircom s QX000 Series is a multichannel zoned audio system that allows the operator to selectively page from a central location to any of the system s audible devices. In addition, the QX000 allows for zoned fire fighters telephone communication with remote telephone handsets that are permanently installed throughout a building. The QX000 Series consists of a card cage/ audio motherboard, an audio/fire alarm interface board, power supply and battery charger which are designed to work with Mircom s FA000 or FX000 Series Fire Alarm Control Panels. In addition it can be integrated with other compatible fire alarm control panels. All hardware and software is fully supervised for correct and reliable operation. The system has a simple interface to the fire alarm control panel, and contains its own power supply and battery backup system. The QX000 Series Zoned Audio system requires one QIF000B Interface card which provides inputs for the fire alarm panel, the paging microphone and the zone paging module. In addition it provides an audio trouble output. Only one interface card is required per system, and it mounts in the first slot of the QMB000B Audio Mother Board and Card Cage. One QIF000B will support seven QMB000B card cages. Each card cage has space for one interface card and seven QAA style amplifiers, for a maximum of 0 watts per cabinet. Features Single, Dual or Three Channel Operation Zone or AllCall selectability (Alert/Evacuation) Control of fire management operations Zoned fire fighters telephones capability Provides single or multiple command centre(s) for use in emergencies Multiple Building Interconnection (Campus Style) Microprocessorbased operations with hardware and software Watchdog Timer to ensure system operation Operates from VDC backup batteries in the event of a power failure Removable terminal blocks for ease of installation and maintenance Indication of all required fault conditions Speaker circuits are integrated with amplifier circuits Multiple amplifier sizes (up to per enclosure for a maximum of 0 watts per enclosure) Maintains full supervision during battery operation or 0 Volt System Digitized Voice Capability Each QMB000B card cage requires one QPS000 Power Supply and QBC000N Battery Charger which all mount into a QBB00 Audio Cabinet. The QX000 Series Audio System interconnects with the Mircom Fire Alarm Control Panels through a supervised connection. Selective paging is provided through the QMP0B/QMP00B Master Paging Control Module which provides the microphone and common control functions. Zone selection is provided through the QZP0 Zoned Paging Selector Module. A total of six QZP0 modules can be connected to the QMP 0B/QMP00B Master Paging Control module. In addition the QX000 Series allows for zoned fire fighters telephones. The QMT0/QMT00A Master Fire Fighters Telephone Control Module provides the master telephone and common control functions. The QZT0 Zoned Fire Fighters Telephone Selector Panel allows for zone selector switches and LEDs. A total of six QZT0 can be connected to the QMT00A /QMT 0 Master Fire Fighters Telephone Control Module. S S 00: City of Chicago Highrise CATALOG NUMBER Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models. 800
QX000 Series Audio Cabinet Components Connectors for Multiple QMB000B Audio Motherboards Slot # Connector for QIF000B Interface Module QBC000N Battery Charger Slots # #8 Connector for QAA Style Amplifiers QMB000B Audio Motherboard & Card Cage QBB00 Audio Backbox The QBB00 holds one QMB000B Audio Motherboard and Card Cage, one QPS000 Audio Power Supply and one QBC000N Audio Battery Charger. The QBB00 will hold up to 0 Ah batteries. QPS000 Power Supply Enclosure supports up to 0AH batteries Note: A knockout is provided on the bottom right of the QBB00 backbox to allow for conduit to be run up the right hand side of the backbox. QMB000B Audio Motherboard and Card Cage The QMB000B supports one QIF000B Audio Interface Board and QAA style audio amplifiers. In addition, the card cage allows for a backup amplifier (if required) to be mounted in the last slot. Typically, the QAA00/ is used as the backup amplifier. The QMB000B requires one QPS000 Audio Power Supply and one QBC Audio Battery Charger. The QMB 000B mounts in the QBB00 Backbox enclosure. QIF000B Audio/Fire Alarm Interface Card The QIF000B includes a tone generator with fire alarm input and audio trouble output. In addition, it has a paging MIC input and zone paging multiplex input. The interface module comes equipped with the following tones: Slow Whoop Pulse 0 SPM & 0 SPM and Bell Tone Generator 0 SPM & 0 SPM. Special tones are available upon request. The QIF000B will support seven QMB000B Audio Motherboard and Card Cages per system and mounts in the first slot of the QMB000B. QRM00 Bell Cut Relay The QRM00 provides a Form C output contact for remote signal silence on page activation. MD Interconnection Cable The MD is used to connect additional Audio Motherboard and Card Cages up to Audio Cabinets. MD Interconnection Cable The MD is used to connect additional Audio Motherboard and Card Cages over Audio Cabinets. QPS000 Audio Power Supply The QPS000 supports up to 0 watts and mounts in the QBB00 Backbox enclosure. QBC000N Audio Battery Charger The QBC000N will charge up to Ah batteries and mounts in QBB00 Backbox enclosure. Note: The QBB00 Audio Backbox will hold up to 0 Ah batteries. Larger batteries will require a BC0 Battery Cabinet. page of
QX000 Series Audio Amplifiers QAA0 and QAA Quad Watt Amplifiers The QAA0 and QAA consist of four watt supervised paging/speaker circuits which can be wired in Class B (Style Y ) only. The QAA 0 is a 0 Volt amplifier and the QAA is a Volt amplifier. Both models mount in the QMB000B Motherboard and Card Cage and occupy one amplifier slot. QAA0S0/ Dual 0 Watt Amplifier The QAA0S0/ consists of two or 0 Volt 0 watt amplifiers. Each amplifier has two watt supervised speaker outputs which are used for A B speakers per floor and are wired in Class B (Style Y ) only. The QAA 0S0/ mounts in the QMB000B Motherboard and Card Cage and occupies one amplifier slot. QAA0S0/ Dual 0 Watt Amplifier The QAA0S0/ consists of two or 0 Volt 0 watt amplifiers. Each amplifier has two watt supervised speaker outputs and two watt supervised speaker outputs which are used for A B speakers per floor and are wired in Class B (Style Y ) only. The QAA 0S0/ mounts in the QMB000B Motherboard and Card Cage and occupies one amplifier slot. QAA00/ Dual 0 Watt Amplifier The QAA00/ consists of two or 0 Volt 0 watt supervised paging/speaker circuits which can be wired in Class A (Style Z ) or Class B (Style Y ). The QAA 00/ mounts in the QMB000B Motherboard and Card Cage and occupies one amplifier slot. QAA00/ 0 Watt Amplifier The QAA00/ consists of one or 0 Volt 0 watt supervised paging/speaker circuit which can be wired in Class A (Style Z ) or Class B (Style Y ). The QAA0 0/ mounts in the QMB000B Motherboard and Card Cage and occupies one amplifier slot. QAA 0 or QAA Wiring Diagram WIRING WATTS MAX. EACH QAA0 or QAA TERMINAL BLOCK 8 QAA0S0/ TERMINAL BLOCK 8 WATTS MAX. EACH WATTS MAX. EACH ZONE D ZONE C ZONE B ZONE A QAA0S0/ Wiring Diagram ZONE A CLASS A (STYLE Z ) or 0 WATTS MAX. ZONE B CLASS A (STYLE Z ) or 0 WATTS MAX. QAA00/ TERMINAL BLOCK 8 CLASS A (STYLE Z ) WIRING EXAMPLE ½ OF ZONE B ½ OF ZONE B ½ OF ZONE A ½ OF ZONE A QAA00/ Wiring Diagram WIRING EXAMPLE QAA00/ Wiring Diagram ZONE A CLASS A (STYLE Z ) OR 0 WATTS MAX QAA00/ TERMINAL BLOCK CLASS A (STYLE Z ) WIRING K, W ELR MODEL MP0 K, W ELR MODEL MP0 K, W ELR MODEL MP0 K, W ELR MODEL MP0 K, W ELR MODEL MP0 K, W ELR MODEL MP0 K, W ELR MODEL MP0 K, W ELR MODEL MP0 0K, W ELR MODEL MP0 BY MIRCOM QAACLA Class A (Style Z ) Converter Module The QAACLA converts each of the four Class B (Style Y ) outputs on a QAA0 or QAA Amplifiers to Class A (Style Z ). The module attaches to the bottom of the amplifier. One QAACLA is required for each amplifier. QAACLAS Class A (Style Z ) Converter Module The QAACLAS converts each of the four Class B (Style Y ) outputs on a QAA0S0/ or QAA 0S0/ Amplifier to Class A (Style Z ). The module attaches to the bottom of the amplifier. One QAACLA is required for each amplifier. QAA00/ TERMINAL BLOCK WIRING ZONE A CLASS A (STYLE Z ) OR 0 WATTS MAX QAA QAA0 AMPLIFIERS OR QAA0S0/ QAA0S0/ AMPLIFIERS QAACLA (FOR QAA OR QAA0 AMPLIFIERS) OR QAACLAS (FOR QAA0S0/ OR/ QAA0S0/ AMPLIFIERS) REMOVABLE TERMINAL BLOCK 0K, W ELR MODEL MP0 BY MIRCOM QAACLA and QAACLAS Connection Diagram page of
QIF000B Wiring Diagram TROUBLE CONTACT QIF000B J 8 QIF000B J GA CONTACT THE QIF000B HAS AN INTERNAL.9K ELR FOR EXPANSION TO MOTHERBOARDS # TO 8 (SEE FACTORY) 00 ohms Line Resistance IN A SINGLE STAGE SYSTEM, THESE TERMINALS ARE SHORTED TOGETHER WITH A AWG WIRE FIRE ALARM CONTROL PANEL TROUBLE ONLY INITIATING CIRCUIT V 0mA MAX NOTICE TO INSTALLER: When connecting to other than Mircom control unit, BEWARE that internal ELR s (End of Line Resistors) on J, J, & J are.9k..9k ½W ELR LISTED S MODEL MP00 NONSIL SIG SIL SIG BELL SIG BELL SIG QIF000B J 8 THE QIF000B HAS AN INTERNAL.9K ELR THE QIF000B HAS AN INTERNAL.9K ELR COMM MD CABLE ASSEMBLY NC PLUG INTO J ON QIF000B NO QRM00 BELL CUT MODULE FIRE ALARM CONTROL PANEL, NONCODED SILENCEABLE INDICATING CIRCUIT V DC 0mA or greater Polarity shown is active otherwise reverse in standby mode. FIRE ALARM CONTROL PANEL, NONCODED NONSILENCEABLE INDICATING CIRCUIT V DC 0mA or greater Polarity shown is active otherwise reverse in standby mode. FIRE ALARM BELL CUT SUPERVISED INITIATING CIRCUIT (AUDIBLE SIGNALS ARE TURNED OFF WHILE INPUT IS SHORTED) V 0mA MAX REFER TO THE BELL CUT MODULE INSTRUCTIONS FOR FURTHER WIRING REQUIREMENTS.9K ½W ELR LISTED S MODEL MP00 QX000 Digitized Voice Components U U J PT PT COMMON VOICE EVACUATION (Factory Installed) PT PT U ALERT U MANUAL SELECTION JP JP PT PLAY RECORD STOP J ADVANCE ERASE NEW The QDV00 Digitized Voice Chip can be installed into the required socket. The QDV000 includes one factory installed QDV00 Digitized Voice Chip in the Evacuation Socket. CHANNEL SPARE QDV00 Digitized Voice Chip QDV000 Digitized Voice Module The QDV000 Digitized Voice Module supports four simultaneous channels of digitized voice; alert, evacuation, manual selection and common voice channel. The voice channels can be voice only, voice and tone and tone only. One QDV000 Digitized Voice Chip is required per channel. The QDV000 Digitized Voice Chip is field programmable using the QDVP00 Digitized Voice Programming Tool. In the case that the QDV000 fails, the QIF000B Tone Generator acts as a backup. The QDV000 includes one factory installed QDV000 Digitized Voice Chip in the Evacuation socket with provisions to add three adder QDV000 chips. The QDV000 mounts in the QBB00 Audio Backbox on top of the QBC000N. QDVP00 Digitized Voice Programming Tool The QDVP00 Digitized Voice Programming Tool allows for field programming of the QDV000 Digitized Voice Module. QDV000 Digitized Voice Chip The QDV000 Digitized Voice Chip stores the channel specific voice or voice/tone message. One QDV000 is required per voice channel being used. The chip is field programmable via the QDVP00 Digitized Voice Programming Tool. The QDV000 allows for the storage of approximately minutes of audio messaging. Once programmed, the QDV 000 chips plug into the appropriate sockets on the QDV000 Digitized Voice Module. page of
QX000 Series Interconnection Modules QIF000 Audio Interconnection Module The QIF000 Audio Interconnection Module is used to interconnect multiple paging systems together. The QIF000 allows for QIF000B to QIF000B interconnection and is used for campus style AllCall Paging. The QIF000 allows each interconnected audio system to have zoned paging for the local building and allcall capabilities for each outlying building. The QIF000 mounts on top of the QBC000N. QIF000 QIF to QIF Interconnection Wiring Diagram Audio System # Audio System # Audio System # QIF000 QIF000 QIF000 QIF000B QIF000B QIF000B QIF000 Programmable Amplifier Interface Module The QIF000 Programmable Amplifier Interface Module provides sixteen programmable audio inputs. Each programmable input is a dry normally open contact. The contact inputs are nonsupervised and can be configured to any number of amplifiers. The amplifiers can be configured to the alert channel, the evacuation channel or to remain silent. The QIF000 mounts on top of the QBC000N. A maximum of eight QIF000 modules can be used per system for a total system capacity of 8 programmable inputs. RM008A TO QIF000B TO NEXT QIF000 (IF USED) IN IN IN IN IN IN IN IN 8 IN 9 J J8 QIF000 IN 0 IN JP IN IN IN IN IN JP J NORMALLY OPEN CONTACTS FROM FIRE ALARM CONFIGURABLE RELAYS FROM QIF000 ON THE FA000 OR FX000 FACPS (MUST BE CLOSE CONDUIT) CLOSE NIPPLE CONNECTED BETWEEN QIF000 AND THE FIRE ALARM CONTROL PANEL TO QIF000B TO MASTER PAGING QMPXXX OR NEXT QIF000 page of
QX000 Series Paging Control Modules QMP0B Master Paging Control Module The QMP0B Master Paging Control Module includes the Paging microphone and common control indicators for A.C.On, Common Trouble, MIC Trouble, MIC Level/Page Enable, Digitized Voice Active, Amplifier Trouble, Circuit Trouble, Remote Failure, Page Inhibit, AllCall, AllCall Minus and Warden Page. The QMP0B has control buttons for Audio Selector Reset, Lamp Test, All Call, AllCall Minus, Microphone PTT and Warden Page. The QMP0B allows for all call paging or selective paging with the QZP0 Zoned Paging Selector Modules. The QMP0B connects to the QIF000B Audio Interface Card via the following connections: an RS8 connection (twisted shielded pair), VDC power, a twisted shielded pair for the microphone interface and a pair of wires for Push To Talk (PTT). The QMP0B features a special preannounce tone for use with Mircom s SPSeries Silenceable Speakers. The QMP0B occupies one module space in the BB000 Series QZP0 Zoned Paging Selector Panel The QZP0 Zoned Paging Selector Panel includes zone selector switches, zone selector LEDs (Green/Red) and Zone trouble LEDs (Amber). The QZP0 is used with the QMP 00B/QMP0B Master Paging Control module. Slidein labels are provided to label the paging zones. The QZP0 occupies one module space in the BB000 or BB000 Series enclosures. QMP00AX Master Paging Control Module The QMP00AX Master Paging Control Module is similar to the QMP0B/QMP00B except that it does not include a paging microphone and is used for Distributed Audio systems. The QMP00AX features a special preannounce tone for use with Mircom s SPSeries Silenceable Speakers. The QMP00AX occupies one module space in the BB000 Series enclosures. QMP00B Master Paging Control Module The QMP00B Master Paging Control Module is similar to the QMP0B Paging Module and is designed for remote mounting in the BB000 Series enclosures. The QMP00B features a special preannounce tone for use with Mircom s SPSeries Silenceable Speakers. The QMP00B occupies one module space in the BB000 Series enclosures. QMP00MSB Microphone Splitter Board The QMP00MSB Microphone Splitter Board provides microphone connections for up to four QIF 000B Interface Cards (for Distributed Audio system). The QMP00MSB occupies one module space in the BB000 Series enclosures and mounts under the QMP00AX Master Paging Control Module. page of
QX000 Series Firefighter Telephone Control Modules (Hardwired) QMT0 Master Firefighters Telephone Control Module The QMT0 includes the Master Telephone Handset and common control indicators for Common Telephone Trouble, Master Telephone Trouble and Incoming Call. The QMT0 has control buttons for Lamp Test and either Connect (on common call/talk system) or Clear All (on multi zoned system). The QMT0 may be used either alone as a common call/talk system or with the QZT0 Zone Selectors as a multizoned system. In a common call/talk system, the user will hear a buzzer at the QMT 0. By picking up the handset and selecting the Connect button, the user will be able to answer the call. In a multi zoned system, the user must select the appropriate telephone zone on the QZT0. If a second call comes in, the appropriate Telephone zone LED will light up. To answer, the user must select the appropriate telephone zone. The QMT 0 will allow up to a maximum of six phones to be answered at a time. The QMT0 is powered with a VDC, 00 ma external DC power source (filtered or unfiltered). The master telephone circuit can be wired in Class A (Style Z ) or Class B (Style Y ). The QMT0 occupies one module space in the BB000 series enclosures. QZT0 Zoned Firefighters Telephone Selector Panel The QZT0 includes zone selector switches, zone CallIn LEDs (Green) and zone trouble LEDs (Amber). The QZT0 is used with the QMT 0/QMT00A Master Telephone Control module to provide a multizoned system. The telephone circuits can be wired in Class A (Style Z ) or Class B (Style Y ). A maximum of six QZT0 can be connected to the QMT0/QMT00A. Slidein labels are provided to label the telephone zones. The QZT0 occupies one module space in the BB000 or BB000 enclosures. Specifications Electrical Requirements Power Input: 0 VAC 0%, %, 0 Hz, A (Primary) Power Supply Ratings: 0A,0V (Secondary) Input Current: Amps Standby Power: VDC Standby batteries Environmental Operating Limits Temperature: 0 to 9 C Humidity: 0 to 9% rh (noncondensing) Dimensions QBB00 Backbox: H x. W x 8 D BB00 Enclosure: 9 H x. W x. D BB00 Enclosure: 8 H x. W x. D BB00 Enclosure:. H x. W x. D BB008 Enclosure: H x. W x. D BB0 Enclosure: H x. W x. D BB008 Enclosure: H x 0 W x D BB0 Enclosure: 0 H x 0 W x D QMT00A Master Firefighters Telephone Control Module The QMT00A Master Firefighters Telephone Control Module is similar to the QMT0 and is designed for remote mounting in the BB000 Series enclosures. The QMT00A occupies one module space in the BB000 Series Enclosures. Audio Backbox Mounting Surface or Semiflush mounting (Use QBB 00TR Flush Trim Ring) page of
QMP00B/QMP0B Wiring Diagram MIC A OUT MIC RS8 QIF000B J S S 8 TWISTED SHEILDED PAIR CABLE FACTORY INSTALLED.9K EOL RESISTOR TWISTED SHEILDED PAIR CABLE QMP00B/QMP0B S MIC. IN S MIC. OUT QMP00B/QMP0B S RS8 IN PTT VDC QIF000B J 8 FACTORY INSTALLED 0R EOL RESISTOR FACTORY INSTALLED.9K EOL RESISTOR S RS8 OUT QMP00B/QMP0B PTT IN PTT OUT QMP00B/QMP0B VDC IN VDC OUT QMT00A/QMT0 Wiring Diagram QMT00A or QMT0 TROUBLE ELR APPROVED ELR END OFLINE DEVICE FOR CONNECTED FIRE ALARM PANEL TRANSMIT TO DETECTION ZONE OF CONNECTED FIRE ALARM PANEL, TO BE USED TO ANNUNCIATE TELEPHONE TROUBLE TELEPHONE CIRCUIT OUT TELEPHONE CIRCUIT SINGLE ZONE SYSTEM: CLASS B TELEPHONE ZONE FOR FT00 OR OTHER COMPATIBLE REMOTE TELEPHONES. CONNECT A 0K ELR RESISTOR AFTER THE LAST REMOTE TELEPHONE. MULTIZONE SYSTEM: DO NOT CONNECT ANY REMOTE TELEPHONES HERE. TELEPHONE ZONE WIRING IS DONE VIA THE QZT0s. LAMP TEST LT TO LAMP TEST TERMINAL ON QMP00B OR QMP0B AUDIO CONTROL MODULE COM EXT AUDIO TO EXT AUDIO TERMINAL ON QMP00B OR QMP0B AUDIO CONTROL MODULE TO QMP00B OR QMP0B VDC or 8 AWG ONLY FROM QMP00B or QMP0B VDC POWER page 8 of
QX000 Series Firefighter Telephone Control Modules (Addressable) QAMT0 Master Firefighters Telephone Addressable Control Module The QAMT0 includes the Master Telephone Handset and common control indicators for Common Telephone Trouble, Master Telephone Trouble and Incoming Call. The QAMT0 has control buttons for Lamp Test and either Connect (on common call/ talk system) or Clear All (on multi zoned system). The QAMT0 may be used either alone as a common call/talk system or with the QAZT0 Zone Selectors as a multizoned system. In a common call/talk system, the user will hear a buzzer at the QAMT0. By picking up the handset and selecting the Connect button, the user will be able to answer the call. In a multi zoned system, the user must select the appropriate telephone zone on the QAZT0. If a second call comes in, the appropriate Telephone zone LED will light up. To answer, the user must select the appropriate telephone zone. The QAMT0 will allow up to a maximum of six phones to be answered at a time. The QAMT0 is powered with a VDC, 00 ma external DC power source (filtered or unfiltered). The master telephone circuit can be wired in Class A (Style Z ) or Class B (Style Y ). The QAMT0 occupies one module space in the BB000 Series enclosures. QAZT0 Addressable Zoned Firefighters Telephone Selector Panel The QAZT0 includes zone selector switches, zone selector LEDs (Green or Red) and trouble LEDs (Amber). The QAZT0 is used with the QAMT0/QAMT00 Master Firefighters Telephone Addressable Control module to provide a multizoned system. Slidein labels are provided to label the telephone zones. The QAZT0 occupies one module space and mounts with the Main FX000 panel in a BB000 Series enclosure or with the RAXLCD in a BB000 or BB000 Series enclosure. MIXM00FP Addressable Firephone Control Module The MIXM00FP is used with the FX000 Series Intelligent Fire Alarm Control Panel and is intended to monitor and control a loop of firefighter phones. It has the ability to differentiate between normal, offhook, and trouble conditions. When taken offhook, a phone will immediately receive a ringing tone, and the panel will receive an offhook indication. The panel can then connect that offhook phone to the main riser for the system. Add suffix A for Canadian model. QAMT00 Master Firefighters Telephone Addressable Control Module The QAMT00A Master Firefighters Telephone Addressable Control Module is similar to the QMT 0 and is designed for remote mounting in the BB 000 Series enclosures. The QAMT00A occupies one module space in the BB000 Series enclosures. page 9 of
() () () () () () CONNECT MODULES TO LISTED COMPATIBLE CONTROL PANELS ONLY TO NEXT DEVICE COMMUNICATION LINE VDC MAX. TWISTED PAIR IS RECOMMENDED ALL WIRING SHOWN IS SUPERVISED AND POWER LIMITED FROM PANEL OR PREVIOUS DEVICE.9K EOL RESISTOR A0 MODULE POLARITIES ARE SHOWN IN ALARM () () () () () () Typical Circuit Configuration Wiring Diagram, Class B (NFPA Style Y) LOOP 9 0 8 9 8 0 TENS 8 9 0 ONES ADDRESS BRANCH CIRCUITS DO NOT LOOP WIRE AROUND TERMINALS. BREAK WIRE TO ENSURE SUPERVISION OF CONNECTIONS. TELEPHONE CONSOLE VOLTS DC POWER LIMITED MIXM00FP FIREPHONE CONTROL MODULE TELEPHONE CONSOLE MUST PROVIDE ITS OWN WIRING SUPERVISION Addressable Firefighter Handsets Operation Addressable Fire Phone Module Addressable Fire Phone Module Addressable Fire Phone Module Addressable Fire Phone Module Twisted Shielded Pair (Data) Twisted Shielded Pair (Audio) Firefighter Telephone Handsets Twisted Shielded Pair Twisted Shielded Pair QAZT0 Firefighter Telephone Handsets Twisted Shielded Pair QAMT00 QAZT0 QAMT00 Four Supervised Remote Telephone Channels Twisted Shielded Pair To a maximum of Master Telephone Control Modules (QAMT00/ QAMT0) RAXLCD FX000 Series FACP page 0 of
Typical System Layout # Lobby Control Unit is located in the lobby while the Audio Panel is located in the electrical room. LOBBY To Fire Zones Twisted Pair (8 AWG) Typical per Fire Fighter Telephone Circuit BB0 Lobby Control Unit c/w Fire Alarm Control Panel, Fire Fighters Telephone Modules and Paging Modules. ELECTRICAL ROOM 0 VAC QBB00 Audio Cabinet c/w Speaker Circuits Twisted Pair (8 AWG) Typical per Speaker Circuit Twisted Shielded Pair (8 AWG) for MIC Twisted Shielded Pair (8 AWG) for RS8 Twisted Pair (8 AWG) for PTT Pair (8 AWG) for VDC Pair (8 AWG) for Signal Circuit # (Silenceable Strobe) Pair (8 AWG) for Signal Circuit # (NonSilenceable Strobe) Pair (8 AWG) for Trouble Contact EMERGENCY VOICE ALARM SYSTEM EMERGENCY VOICE ALARM SYSTEM To a maximum of Audio Card Cages MD Interconnect Cable should be run in a " conduit connector. The QBB00 cabinets should not be more than 8" apart. MD cable is required for up to three card cages. For applications over three card cages, the MD cable is required. 0 VAC 0 VAC Typical System Layout # All units are located in the lobby or fire command centre. To Fire Zones Twisted Pair (8 AWG) Typical per Fire Fighter Telephone Circuit Twisted Shielded Pair (8 AWG) for MIC Twisted Shielded Pair (8 AWG) for RS8 Twisted Pair (8 AWG) for PTT Pair (8 AWG) for VDC Pair (8 AWG) for Signal Circuit # (Silenceable Strobe) Pair (8 AWG) for Signal Circuit # (NonSilenceable Strobe) Pair (8 AWG) for Trouble Contact Twisted Pair (8 AWG) Typical per Speaker Circuit QBB00 Audio Cabinet c/w Speaker Circuits BB0 Lobby Control Unit c/w Fire Alarm Control Panel, Fire Fighters Telephone Modules and Paging Modules. EMERGENCY VOICE ALARM SYSTEM EMERGENCY VOICE ALARM SYSTEM 0 VAC 0 VAC 0 VAC MD Interconnect Cable should be run in a " conduit connector. The QBB00 cabinets should not be more than 8" apart. MD cable is required for up to three card cages. For applications over three card cages, the MD cable is required. To a maximum of Audio Card Cages page of
Ordering Information Model Description Emergency Audio Control Panel QMB000B Audio Motherboard & Card Cage (Supports one QIF000B Interface Board and QAA style Audio Amplifiers) QIF000B Audio/Fire Alarm System Interface Card QIF000 Audio Interconnection Module (QIF to QIF) QIF000 Programmable Amplifier Interface Module QPS000 Audio Power Supply QBC000N Audio Battery Charger QAA0 0 Volt Quad Watt Amplifier QAA Volt Quad Watt Amplifier QAACLA Class A (Style Z ) Converter Module for QAA and QAA0 Amplifiers QAA0S0/ or 0 Volt Dual 0 Watt Amplifier split A B circuits per floor QAA0S0/ or 0 Volt Dual 0 Watt Amplifier split A B circuits per floor QAACLAS Class A (Style Z ) Converter Module for QAA0S0/ and QAA0S0/ Amplifiers QAA00/ or 0 Volt Dual 0 Watt Amplifier QAA00/ or 0 Volt 0 Watt Amplifier QBB00 Audio Backbox Enclosure QBB00TR Flush Trim Ring for QBB00 Audio Backbox QRM00 QX000 Series Bell Cut Relay MD Interconnection cable (One required for each additional Audio Motherboard and Card Cage up to three cabinets.) MD Interconnection cable (One required for each additional Audio Motherboard and Card Cage over three.) Digitized Voice Components QDV000 Digitized Voice Module QDV000 Digitized Voice Chip QDVP00 Digitized Voice Programming Tool Zoned Paging Control QMP00B Master Paging Control Module c/w paging microphone and common control functions. Mounts in BB000 Series Enclosures. QMP0B Master Paging Control Module c/w paging microphone and common control functions. Mounts in BB000 Series Enclosures. QZP0 Zoned Paging Selector Panel c/w zone selector switches, selector LEDs (Green) and trouble LEDs (Amber). Mounts in BB000 or BB000 Series Enclosures. QMP00AX Master Paging Control Module (No Paging Microphone) QMP00MSB Microphone Splitter Board Zoned Firefighters Telephone Control QMT00A Master Firefighters Telephone Control Module c/w master handset and common control functions. Mounts in BB000 Series Enclosures. QMT0 Master Firefighters Telephone Control Module c/w master handset and common control functions. Mounts in BB000 Series Enclosures. QZT0 Zoned Firefighters Telephone Selector Panel c/w zone selector switches, zone CallIn LEDs zone trouble LEDs and Class A/B (Style Z/Y) telephone circuits. Mounts in BB000 or BB000 Enclosures. QAMT00 Master Firefighters Telephone Addressable Control Module QAMT0 Master Firefighters Telephone Addressable Control Module QAZT0 Addressable Zoned Firefighters Telephone Selector Panel MIXM00FP Addressable Firephone Control Module Zoned Paging & Firefighters Telephone Module Enclosures BB00 SemiFlush Backbox (Houses module) BB00 SemiFlush Backbox (Houses modules) BB00 SemiFlush Backbox (Houses modules) BB008 SemiFlush Backbox (Houses 8 modules) BB0 SemiFlush Backbox (Houses modules) MCH00 BB000 Blank Panel Insert BB0 Lobby Control Centre Wallbox Enclosure (Supports module foot prints) DOX0M Painted Beige Metal Door for BB0 CCH0 Custom Mounting Kit for BB0 (One required for each BB0) BB008 Lobby Control Centre Wallbox Enclosure (Supports 8 module foot prints) DOX008M Painted Beige Metal Door for BB008 CCH008 Custom Mounting Kit for BB008 (One required for each BB008) Distributed by: Canada Interchange Way Vaughan, Ontario LK W Telephone: (90) 0 Fax: (90) 0 U.S.A. Witmer Industrial Estates Niagara Falls, NY 0 Toll Free: (888) 0 Fax Toll Free: (888) 0 Web page: http://www.mircom.com Email: mail@mircom.com Rev.