SI evelop Table Tops and ases Pricelist March 2015
EVELOP Table of ontents evelop Table ases Top and ase ombinations hart 3 General Information 6 ases 9 ases 10 E ases Fixed and Folding 11 E ases Flip-Top 12 F ases 13 I ases 14 M ases 15 S ases 16 P ases Fixed and Folding 17 P ases Flip-Top 18 T ases 19 G ases 20 W ases 22 Table ccessories Table Storage and ccessories 26 Table Tops Square 27 Round 27 Rectangular 29 oat 53 Half Round 55 Trapeziod 55 rescent 55 Racetrack 57 -Shaped 59 2
Top and ase ombinations EVELOP 3
EVELOP Top and ase ombinations 4
Top and ase ombinations EVELOP 5
EVELOP General Information Flip-Top Table, T Legs Round Table, X Pedestal Rectangular Table, TT Legs Rectangular Table, Quick-Release Modesty Panel Features Fixed, folding, flip-top bases Modesty panel and wire management asters option Ganging evice djustable Glides White aster lack aster Single ar Flip Top SPEIFITIONS T ase Pedestal Table This system employs heavy gauge tubular steel components in fixed, folding, or flip-top models. T ases includes T, TT and X leg styles. Fixed table column welded to 1/4" solid steel plate. ases uilt of 2-1/4", 14-gauge round tubular steel leg column with steel end cap and 16-gauge steel tapered legs elliptically swaged down to 1" diameter at end; highly durable, smooth powder-coated finish. djustable glides or casters are secured to the legs. T ase Folding Mechanism uilt of 11-gauge, black zinc finish steel, the folding mechanism easily releases and folds leg tightly to table bottom and securely locks with two polypropylene clips. When opened, legs engage into place for a tight, rigid fit between leg and mechanism. uilt-in rubber bumpers keep tables separated to prevent marring when tables are stacked on edge. Flip-Top Standard flip-top table does not have a detachable top. connecting bar, allowing for one-handed flipping engagement, will ship with each base. right hrome Finish Surfaces are duplex nickel-chrome plated in a twenty-two step process. Powder-oated Finish Hybrid powder coating is electrostatically applied. The dry coating is then fused and cured in a baking oven to form a smooth continuous film. Finish is chemical-resistant, hard, tough and marresistant. T ase Table Truck lack powder-coated finish. Two swivel and two rigid 6" diameter casters with heavy-duty roller bearings. Rectangular or square table storage. Truck measures 60" long by 30" wide by 55" high. Felt is standard on top edges. Six-table capacity. T ase with PowerUp Tables are available with one or two power/data modules, PowerUp, centrally located 4-1/4" from the front edge of table top. PowerUp is a UL Listed, Relocatable Power Tap, which mounts flush into the table top. When flipped up, cover open, one (1) duplex receptacle and two (2) data ports are exposed. The underside of the table is provided with a hinged plastic channel (cord management trough) which covers the bottom of the module. This channel, furnished with metal dividers, is provided for the routing of the power supply cords and data lines. The PowerUp module is 6-1/4" long by 3" wide by 2-1/2" high when opened. It is provided with a 9 ft. or 15ft., 3- conductor cord and is rated 120V a/c, 15. The cover snaps into the upright position to allow cords to be unplugged without the cover closing. The data ports are molded to accept T&T M Series, data jacks. The module can be modified to accept various brand jacks. ords are further managed by the vertical leg wire manager which comes standard with PowerUp. 6
General Information EVELOP ases: Tapered Ped (H3), isc Ped (H4) ase E ase F ase Features Powder-coated finish hrome finish Fixed legs Folding legs Polished aluminum SPEIFITIONS ase onstruction This system employs heavy gauge columns screwed to either formed steel or cast aluminum bases in fixed models. Fixed columns are bolted onto stamped steel spider plates which are attached to tops. ase Frames H3 tapered pedestal base is 19 gauge steel. 3.0" diameter table column is 16 gauge steel. Tables spider is 8 gauge steel. H4 disc pedestal base is.04" thick steel with welded reinforcement. 4.0" column is.06" thick steel. H5 disc pedestal base is.04" thick steel with welded reinforcement. Table spider is.16" thick steel. 5.5" table column is 14 gauge steel. bove tables have adjustable glides that are 7/8" diameter black thermoplastic. No tools are required for glide adjustment. ase onstruction system of modular base components that fit together to form a column hub. This permits three, four or five legs and stringers to be incorporated into the hub design for a variety of configurations, using the same components and providing a continuity of design. ase Frames ast aluminum legs, plugs and stringer connectors. Heavy-gauge steel columns and tubular steel stringers. Hub components, column and spider are tied together with a column bolt. Three sizes of legs. djustable glides. Spiders are cast aluminum. Tables 10' and longer are supplied with a top stringer. E ase onstruction The system employs tubular components in fixed or folding models. Includes T, TT and X leg style combinations. Top plate of 8" x 8" steel, with four holes for 1/4" diameter screws. E ase Frames 1-3/4" round tubular steel feet, legs, plugs and stringer connectors. LX series is furnished with 3 o.d. seamless tubular steel column. ll ends capped with steel plugs brazed in place, ground and polished smooth. djustable glides. F ase onstruction system of modular base components that fit together to form a column hub. This permits three or four legs and stringers to be incorporated into the hub design for a variety of configurations, using the same components and providing a continuity of design. F ase Frames ast aluminum legs, plugs and stringer connectors. Heavy-gauge steel columns and tubular steel stringers. Hub components, column and spider are tied together with a column bolt. djustable glides. Spiders are cast aluminum. Tables 10' and longer are supplied with a top stringer. M ase Frame uilt of cast aluminum feet with heavy wall extruded aluminum columns (T and TT) or 2-1/2" diameter 14-gauge steel leg column (X) and highly durable, smooth powdercoated finish. djustable nylon glides are secured to the legs. M ase onstruction This system employs heavy-gauge steel, cast and extruded aluminum components in fixed or folding models. M base includes T, TT and X leg styles. Fixed table column and foot bolted to 3/16" solid steel plate with two 3/16" x 24" long through bolts. Fixed base shipped k.d., folding base shipped assembled. P ase Frames The double pedestal base employs 14- gauge, 1-3/4" round steel upright columns and 16-gauge, 1-3/4" x 7/8" elliptical steel foot tubes in fixed or folding models. The P base includes T, TT and LX leg styles. LX bases consist of 14-gauge, 3" 7
EVELOP General Information M ase P ase S ase T ase I ase Features Powder-coated finish hrome finish Fixed legs Folding legs round steel upright columns and 16-gauge, 1-3/4" x 7/8" elliptical steel foot tubes. Fixed table columns are welded to 1/4" thick, 8" x 8" steel plate. ases are available in powder-coated or bright chrome finish with plastic trim pieces that are available in the same colors as the vinyl table edge colors. Plastic end caps are secured via a force-fit. The column cap is secured via a rivet. djustable glides. S ase onstruction This system employs double-column noncircular uprights on a horizontal base. It is offered in fixed and folding models. omposition includes T, TT, X and cantilevered configurations. S ase Frame ase is built of double-column aluminum extrusion non-circular uprights. flannel colored plastic (polypropylene) trim piece accents the bottom and a Flannel colored powdercoated steel trim piece accents the top of the uprights. Feet are extruded aluminum and endcaps are diecast aluminum. Uprights, feet and endcaps are powdercoated in all standard colors. djustable glides attach to feet. Trim pieces are available in flannel only. T ase Frame uilt of 2-1/4", 14-gauge round tubular steel leg column with steel end cap and 16-gauge steel tapered legs elliptically swaged down to 1" diameter at end; highly durable, smooth powder-coated finish or chrome. djustable glides or casters are secured to the legs. T ase onstruction This system employs heavy gauge tubular steel components in fixed or folding models. T base includes T, TT and X leg styles. Fixed table column welded to 1/4 solid steel plate. I ase T-Frame Mounting Plate: 7-gauge steel plate, 8" x 8" olumn: 14-gauge steel tubing, 2" O Main ar: 14-gauge steel tubing, 2" O raw olt: 1/2-13 threaded rod, 26-5/8" length Glides: 1" diameter nickel-plated base with 5/16-18 x 1" stem End aps: Glassfilled nylon material, Flannel color I ase X-Frame Mounting Plate: 7-gauge steel plate, 8" x 8" olumn: 14-gauge steel tubing, 3" O Main ar: 14-gauge steel tubing, 2" O raw olt: 1/2-13 threaded rod, 26-5/8" length Glides: 1" diameter nickel-plated base with 5/16-18 x 1" stem End aps: Glassfilled nylon material, Flannel color right hrome Finish Steel surfaces are duplex nickel-chrome plated in a twenty-two step process. This process is the same as is used in the automotive industry for exterior finishes. Polished luminum Finish Exposed aluminum surfaces are highly polished to harmonize with bright chrome plated finishes. Powder-oated Finish Epoxy powder coating is electrostatically applied. The dry coating is then fused and cured in a baking oven to form a smooth, continuous film. Finish is chemical-resistant, hard, tough and mar-resistant. Leg Wireways Scuff-resistant, high-impact rigid PV plastic. Two separate wire channels per leg. Fastened to legs with full length adhesive bond. lack only. One wireway per leg. Shipped assembled. Two leg wireways per top. Not available on 18" x 60" fixed base tables, 18" x 60" and 24" x 60" cantilevered base and folding tables. Grommets Plastic grommets are 3" diameter and recessed into table top. ap is removable and has retractable slot cover. Two grommets per top. Grommets not available on 18" x 60" fixed base tables, 18" x 60" and 24" x 60" cantilevered base and folding tables. 8
ases EVELOP MOEL NUMER MOEL Round Tapered Pedestal 3" column diameter Size asic Model ase olor List Price 29x22 V342229P qq $485 29X26 V3H2629P qq 535 42X22 V3H2242P qq 540 32 V3H23P qq 1525 Round isk Pedestal 4" column diameter 29X20 V4H2029 qq 515 29X24 V4H2429 qq 615 29X32 V4H3229 qq 700 42X20 V4H2042 qq 615 42X24 V4H2442 qq 705 42X32 V4H3242 qq 775 Round isk Pedestal 5" column diameter 6" column diameter 29X32 V5H3229 qq 755 42X32 V5H3242P qq 800 29X32 V6H3229 qq vailable as a special 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 9
EVELOP ases MOEL NUMER Features ase Spread asic Model ase olor List Price MOEL Single Pedestal 1 olumn 22 iameter 511H qq $435 1 olumn 28 iameter 514H qq 450 1 olumn 32 iameter 516H qq 465 ouble Pedestal 2 olumns 19x32 311HS181 qq 630 2 olumns 19x38 311HS241 qq 645 2 olumns 24x35 314HS181 qq 665 2 olumns 24x41 314HS241 qq 680 2 olumns 24x53 314HS361 qq 690 2 olumns 24x65 314HS481 qq 710 Triple Pedestal 3 olumns 28x96 316HS362 qq 1150 3 olumns 28x120 316HS482 qq 1185 Hex Pedestal 6 olumns 55 iamter 311HX126 qq 1885 qq 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 10
E ases EVELOP MOEL NUMER Features ase Spread asic Model ase olor List Price MOEL Fixed Single X Pedestal 26x26 EX26 qq $305 32x32 EX32 qq 315 32x32 EX332 qq 380 Fixed T Legs 16X24 E16 qq 325 22X24 E22 qq 355 Fixed TT Legs 2 Legs 32x47 E32 qq 465 3Legs 32x102 E323 qq 710 2 Legs 38x47 E38 qq 480 3 Legs 38x102 E383 qq 745 4 Legs 38x153 E384 qq 960 Folding T Legs 16x51 E16F qq 700 22x51 E22F qq 720 Folding TT Legs 42x22 E4222F qq 630 42x32 E4232F qq 1100 32x51 R32F qq 1025 38x51 E38F qq 1050 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 11
EVELOP E ases MOEL NUMER MOEL Flip-Top Single X Pedestal Features ase Spread asic Model ase olor Glides/ asters List Price 26x26 EX26T qq $570 32x32 EX32T qq 580 3 diameter 32x32 EX332T qq 590 Flip-Top T Legs 22X24 E22T qq 560 Fixed T Legs - afe Height afe Height 16 EH16 qq q 430 afe Height 22 EH22 qq q 450 Fixed TT Legs - afe Height 2 Leg 32 EH-32 qq q 670 3 Leg 32 EH-32-3 qq q 1015 2 Leg 38 EH-38 qq q 680 3 Leg 38 EH-38-3 qq q 1090 4 Leg 38 EH-38-4 qq q 1455 Fixed Single X Pedestal - afe Height 26 EXH-26 qq q 430 32 EXH-32 qq q 445 3 diameter 32 EXH332 qq q 535 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select glide/caster option G = Guides = asters dd $30.00 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 12
F ases EVELOP MOEL NUMER MOEL Features ase Spread asic Model ase olor olumn Finish Stringer Finish List Price Single Pedestal ouble Pedestal Triple Pedestal Square Pedestal rawing is not an exact representation of the angles of the feet Painted ase 27x27 FS-1427 qq qq $385 Polished lum 27x27 FS-1427 -H qq 421 Painted ase 32x32 FS-1632 qq qq 385 Polished lum 32x32 FS-1632 -H qq 421 Painted ase 26x31 F-1431 qq qq qq 580 Polished lum 26x31 F-1431 -H qq qq 638 Painted ase 26x37 F-1437 qq qq qq 580 Polished lum 26x37 F-1437 -H qq qq 638 Painted ase 26x43 F-1443 qq qq qq 580 Polished lum 26x43 F-1443 -H qq qq 638 Painted ase 26x49 F-1449 qq qq qq 580 Polished lum 26x49 F-1449 -H qq qq 638 Painted ase 26x61 F-1461 qq qq qq 580 Polished lum 26x61 F-1461 -H qq qq 638 Painted ase 30x39 F-1639 qq qq qq 580 Polished lum 30x39 F-1639 -H qq qq 638 Painted ase 30x51 F-1651 qq qq qq 580 Polished lum 30x51 F-1651 -H qq qq 638 Painted ase 30x63 F-1663 qq qq qq 580 Polished lum 30x63 F-1663 -H qq qq 638 Painted ase 30x115 FT-16115 qq qq qq 920 Polished lum 30x115 FT-16115 -H qq qq 1007 Painted ase 30x91 FT-1691 qq qq qq 920 Polished lum 30x91 FT-1691 -H qq qq 1007 Painted ase 38x44 FQ-14581 qq qq qq 1110 Polished lum 38x44 FQ-14581 -H qq qq 1209 Painted ase 41x48 FQ-1663 qq qq qq 1110 Polished lum 41x48 FQ-1663 -H qq qq 1209 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = Polished luminim O = ottonwood W = reamy White FN = Flannel GX = Grape / MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select column/stringer color. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand 13
EVELOP I ases MOEL NUMER ase Spread asic Model ase olor List Price MOEL Fixed Single X Pedestal 22x22 IX22 qq $335 26x26 IX26 qq 345 30x30 IX30 qq 360 32x32 IX32 qq 375 36x36 IX36 qq 390 Fixed T Legs 16 IT-16 qq 350 22 IT-22 qq 365 30 IT-30 qq 380 Fixed T Legs Rolling 16 IT16R qq 460 22 IT22R qq 475 30 IT30R qq 490 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 14
M ases EVELOP MOEL NUMER MOEL Fixed Single X Pedestal Fixed T Legs Fixed TT Legs Folding T Legs Folding TT Legs Flip-Top Single X Pedestal Flip-Top T Legs asic Model asic Model ase olor List Price VMX-26FX qq $405 VMX-32FX qq 430 qq VMT-16FX qq 445 VMT-22FX qq 395 qq VMTT-32FX- qq 765 VMTT-32FX3 qq 1155 VMTT-38FX- qq 770 VMTT-38FX3 qq 1170 VMTT-38FX4 qq 1150 VMT-16F- qq 745 VMT-32SF- qq 735 VMT-22SF- qq 1260 VMTT-32F- qq 1150 VMTT-32SF- qq 1280 VMTT-38F- qq 1240 VMX-26FP- qq 450 VMX-32FP- qq 460 qq VMT-22FP- qq 490 qq qq 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne O = ottonwood W = reamy White FN = Flannel GX = Grape / MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select column/stringer color. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand 15
EVELOP S ases MOEL NUMER MOEL Fixed X Pedestal Fixed T Legs Features ase Spread asic Model ase olor List Price 26x26 VSX26-FX qq $423 32x32 VSX-32-FX qq 450 16x24 VST16-FX qq 464 22x24 VST22-FX qq 486 Rolling 16x24 VSTR16-FX qq 565 Rolling 16x24 VSTR22-FX qq 590 Fixed TT Legs 2 Legs 32x47 VSTT32FX qq 770 3 Legs 32x102 VSTT32FX3 qq 1170 2 Legs 38x47 VSTT38FX qq 770 3 Legs 38x102 VSTT38FX3 qq 1175 4 Legs 38x153 VSTT38FX4 qq 1540 Rolling 32x47 VSTTR32FX qq 900 Rolling 38x47 VSTTR38FX qq 875 Folding T Legs 16x51 VST16-F qq 685 22x51 VST22-F qq 675 42x22 VST22-SF qq 1030 Rolling 16x51 VSTR16-F qq 785 Rolling 22x51 VSTR22-F qq 775 Rolling 42x24 VSTR22-SF qq 1140 Folding TT Legs 42x32 VSTT32F qq 990 32x51 VSTT32SF qq 1030 38x51 VSTT38F qq 1100 Rolling 42x32 VSTTR32F qq 1090 Rolling 32x51 VSTTR32SF qq 1150 Rolling 38x51 VSTTR38F qq 1200 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 16
P ases EVELOP MOEL NUMER Features ase Spread asic Model ase olor List Price MOEL Fixed Single X Pedestal 26x26 PX-26 qq $245 32x32 PX-32 qq 260 Fixed T Legs 16X24 P-16 qq 255 22X24 P-22 qq 260 Fixed TT Legs 2 Legs 32x47 P-32 qq 345 3Legs 32x102 P-323 qq 535 2 Legs 38x47 P-38 qq 375 3 Legs 38x102 P-383 qq 575 4 Legs 38x153 P-384 qq 725 Folding T Legs 16x51 PF--16 qq 525 22x51 PF--22 qq 545 Folding TT Legs 42x22 PF-4222 qq 500 42x32 PF-4232 qq 845 32x51 PF--32 qq 805 38x51 PF--38 qq 820 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = Polished luminim O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select end cap color. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand 17
EVELOP P ases MOEL NUMER MOEL Flip-Top Single X Pedestal Features ase Spread asic Model ase olor Glides/ asters List Price 26x26 PX26T qq $375 32x32 PX32T qq 390 Flip-Top T Legs 22X24 P22T qq 380 Fixed T Legs - afe Height afe Height 16 PH16 qq q 355 afe Height 22 PH22 qq q 340 Fixed TT Legs - afe Height 2 Leg 32 PH-32 qq q 656 3 Leg 32 PH-32-3 qq q 895 2 Leg 38 PH-38 qq q 590 3 Leg 38 PH-38-3 qq q 915 4 Leg 38 PH-38-4 qq q 1280 Fixed Single X Pedestal - afe Height 26 PXH-26 qq q 405 32 PXH-32 qq q 420 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select glide/caster option G = Guides = asters dd $30.00 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 18
T ases EVELOP MOEL NUMER asic Model ase olor List Price MOEL Fixed Single X Pedestal VTX26FX qq $420 VTX32FX qq 445 Fixed T Legs VTT16FX qq 475 VTT22FX qq 485 VT16120FX qq 550 Fixed TT Legs VTT32FX qq 775 VTT32FX3 qq 1185 VTT38FX qq 775 VTT38FX3 qq 1190 Folding T Legs VTT38FX4 qq 1550 VTT22FS qq 750 VTT22SF qq 1100 Folding TT Legs VTT32F qq 1135 VTT32SF qq 1200 VTT38F qq 1150 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = Polished luminim O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select base option. -4G = 4 Glides -4MW = 2 asters, 2 Glides dd $14-4W = 4 asters dd $28 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 19
EVELOP T ases MOEL NUMER asic Model ase olor ase List Price MOEL Flip-Top Single X Pedestal VTX26FP qq qq $505 VTX32FP qq qq 540 Flip-Top T Legs For 48 Rec Top VTT2248R qq qq 737 For 60 Rec Top VTT2260R qq qq 737 For 72 Rec Top VTT2272R qq qq 737 For 48 Trapezoid Top VTT2248T qq qq 737 For 60 Trapezoid Top VTT2260T qq qq 737 For 72 Trapezoid Top VTT2272T qq qq 737 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = hrome O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select base option. -4G = 4 Glides -4MW = 2 asters, 2 Glides dd $14-4W = 4 asters dd $28 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 20
G ase EVELOP MOEL NUMER asic Model ase olor ase List Price MOEL Flip-Top GT2442 qq qq $650 GT2448 qq qq 660 GT2460 qq qq 670 GT2466 qq qq 680 GT2472 qq qq 695 GT3042 qq qq 675 GT3048 qq qq 690 GT3060 qq qq 700 GT3066 qq qq 710 GT3072 qq qq 720 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select base finish. V = ntique Vein L = lack S = Sand WG = Warm Grey LG = Light Tone M = hampagne Metallic EX = Espresso Metallic SX = Starlight Silver = ordeaux ZM = ronze Metallic Y = ayenne H = Polished luminim O = ottonwood W = reamy White FN = Flannel GX = Grape MR = Marine Teal NK = Nickel Vein N = Nordic SH = Splash SU = Sunburst TO = Tangelo WS = Wet Sand Select base option. -4G = 4 lack Glides -4MW = 2 lack asters w/white aps, 2 Glides -4M = 2 lack aster w/lack aps, 2 Glides -4W = 4 lack asters w/white Hub aps -4 = 4 lack asters w/lack Hub aps PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 21
EVELOP XX ases MOEL NUMER asic Model Size ase olor Glide Options List Price MOEL Fixed ase 29 Fixed Height WFX 2436 qq q $467 WFX 2442 qq q 467 WFX 2448 qq q 467 WFX 2454 qq q 467 WFX 2460 qq q 467 WFX 2466 qq q 467 WFX 2472 qq q 467 WFX 3036 qq q 473 WFX 3042 qq q 473 WFX 3048 qq q 473 WFX 3054 qq q 473 WFX 3060 qq q 473 WFX 3066 qq q 473 WFX 3072 qq q 473 WFX 3636 qq q 473 WFX 3642 qq q 473 WFX 3648 qq q 473 WFX 3654 qq q 473 WFX 3660 qq q 473 WFX 3666 qq q 473 WFX 3672 qq q 473 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select size. Select base finish. L = lack WG = Warm Grey M = hampagne Metallic SX = Starlight Silver O = ottonwood WS =Wet Sand ZM =ronze Metallic Select glide option. G = Glides R= 2 asters, 2 Glides dd $26 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 22
W ases EVELOP MOEL NUMER MOEL rank ase 27-44 djustable Height djusts at a rate of 6-1/3 turns per inch asic Model Size ase olor Inner ase olor Glide Options List Price WR 2448 qq qq q $1150 WR 2454 qq qq q 1155 WR 2460 qq qq q 1164 WR 2466 qq qq q 1182 WR 2472 qq qq q 1188 WR 3048 qq qq q 1218 WR 3054 qq qq q 1221 WR 3060 qq qq q 1233 WR 3066 qq qq q 1247 WR 3072 qq qq q 1259 WR 3636 qq qq q 1218 WR 3654 qq qq q 1221 WR 3660 qq qq q 1233 WR 3666 qq qq q 1247 WR 3672 qq qq q 1259 E 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select size. Select base finish. L = lack WG = Warm Grey M = hampagne Metallic SX = Starlight Silver O = ottonwood WS =Wet Sand ZM =ronze Metallic E Select glide option. G = Glides R= 2 asters, 2 Glides dd $26 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. Select inner base color. L = lack WH = White SV = Silver 23
EVELOP W ases MOEL NUMER MOEL ounterbalance ase esigned to support 15 to 45 lbs of euipment 28-47 adjustable height ase color is for foot only Inner color is for complete column and user structure asic Model Size ase olor Inner ase olor Glide Options List Price W 2448 qq qq q $2074 W 2454 qq qq q 2074 W 2460 qq qq q 2089 W 2466 qq qq q 2101 W 2472 qq qq q 2113 W 3048 qq qq q 2080 W 3054 qq qq q 2080 W 3060 qq qq q 2095 W 3066 qq qq q 2110 W 3072 qq qq q 2121 W 3636 qq qq q 2080 W 3654 qq qq q 2080 W 3660 qq qq q 2095 W 3666 qq qq q 2110 W 3672 qq qq q 2121 E 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select size. Select base finish. L = lack WG = Warm Grey M = hampagne Metallic SX = Starlight Silver O = ottonwood WS =Wet Sand ZM =ronze Metallic E Select glide option. G = Glides R= 2 asters, 2 Glides dd $26 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. Select inner base color. L = lack WH = White SV = Silver 24
W ases EVELOP MOEL NUMER MOEL Fixed ase- 120 egree orner 29 Fixed Height asic Model Size ase olor Inner ase olor Glide Options List Price WFX 2436 qq q 482 WFX 3048 qq q 496 rank ase - 120 egree orner 27-44 djustable Height djusts at a rate of 6-1/3 turns per inch WR 2472 qq qq q 1167 WR 3048 qq qq q 1233 ounterbalance ase - 120 egree orner esigned to support 15 to 45 lbs of euipment 28-47 adjustable height ase color is for foot only Inner color is for complete column and user structure W 3066 qq qq q 2074 W 3072 qq qq q 2095 E 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select size. Select base finish. L = lack WG = Warm Grey M = hampagne Metallic SX = Starlight Silver O = ottonwood WS =Wet Sand ZM =ronze Metallic E Select glide option. G = Glides R= 2 asters, 2 Glides dd $26 PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. Select inner base color. L = lack WH = White SV = Silver 25
EVELOP ccessories MOEL NUMER HRPT MOEL Table Truck Minimum table sizes are 48" rectangular or 48" round/square Maximum table sizes are 48" x 96" rectangular and 60 round/square Six-table capacity; with short fold bases, 4-table capacity lack finish only Table truck dimensions 5' long, 30" wide and 4" high Used to store Folding Tables only Under-Table Wire Management onstructed of easy-to-use, high quality black velcro Harness is fastened to table bottom with screws Leg Wireways Scuff-resistant, high-impact rigid PV plastic Two separate wire channels per leg Fastened to legs with adhesive bond One wireway per leg; black only asic Model ase olor List Price TT $1000 VW 20 WO 22 Grommets Plastic grommets are 3" diameter and recessed into table top ap is removable and has retractable slot cover Two grommets per top G qq 6 Rolling arron Leg Embedded wheels on one end of a 3220 two-column table EW-KIT qq 88 GNGER 20 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select finish. L = lack S = Sand WG = Warm Grey FN = Flannel WS = Wet Sand PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 26
Square & Round Laminate Tops EVELOP MOEL NUMER MOEL Square Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 24x24 US-2 qqqq qq qq $131 $147 $131 $131 $131 30x30 US25 qqqq qq qq 179 199 179 179 179 36x36 US-3 qqqq qq qq 231 255 231 231 231 42x42 US35 qqqq qq qq 253 281 253 253 253 48x48 US-4 qqqq qq qq 274 306 274 274 274 54x54 US45 qqqq qq qq 381 417 381 381 381 60x60 US-5 qqqq qq qq 472 512 472 472 472 72x72 US-6 qqqq qq qq 636 684 636 636 636 84x84 US-7 qqqq qq qq 699 755 699 699 699 96x96 US-8 qqqq qq qq 911 973 911 911 911 108x108 US-9 qqqq qq qq 1167 1239 1167 1167 1167 120x120 US10 qqqq qq qq 1266 1346 1266 1266 1266 Round 24x24 UR-2 qqqq qq qq 153 169 153 153 153 30x30 UR25 qqqq qq qq 208 288 208 208 208 36x36 UR-3 qqqq qq qq 268 292 268 268 268 42x42 UR35 qqqq qq qq 294 322 294 294 294 48x48 UR-4 qqqq qq qq 320 352 320 320 320 54x54 UR45 qqqq qq qq 439 475 439 439 439 60x60 UR-5 qqqq qq qq 542 582 542 542 542 72x72 UR-6 qqqq qq qq 727 775 727 727 727 84x84 UR-7 qqqq qq qq 800 856 800 800 800 96x96 UR-8 qqqq qq qq 1049 1113 1049 1049 1049 108x108 UR-9 qqqq qq qq 1325 1397 1325 1325 1325 120x120 UR10 qqqq qq qq 1438 1518 1438 1438 1438 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 27
EVELOP Square & Round Laminate Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $283 $303 $363 $379 $283 $303 $283 $303 $363 $379 $395 $419 369 394 469 489 369 394 369 394 469 489 509 539 459 489 579 603 459 489 459 489 579 603 627 663 519 554 659 687 519 554 519 554 659 687 715 757 578 618 738 770 578 618 578 618 738 770 802 850 723 768 903 939 723 768 723 768 903 939 975 1029 852 902 1052 1092 852 902 852 902 1052 1092 1132 1192 1092 1152 1332 1380 1092 1152 1092 1152 1332 1380 1428 1500 1231 1301 1511 1567 1231 1301 1231 1301 1511 1567 1623 1707 1500 1577 1810 1872 1500 1577 1500 1577 1810 1872 1934 2027 1851 1941 2211 2283 1851 1941 1851 1941 2211 2283 2355 2463 2026 2126 2426 2506 2026 2126 2026 2126 2426 2506 2586 2706 369 385 453 469 369 385 369 385 453 469 485 505 478 498 583 603 478 498 478 498 583 603 623 648 592 616 718 742 592 616 592 616 718 742 766 796 672 700 819 847 672 700 672 700 819 847 875 910 752 784 920 952 752 784 752 784 920 952 984 1024 925 961 1114 1150 925 961 925 961 1114 1150 1186 1231 1082 1122 1292 1332 1082 1122 1082 1122 1292 1332 1372 1422 1375 1423 1627 1675 1375 1423 1375 1423 1627 1675 1723 1783 1556 1612 1850 1906 1556 1612 1556 1612 1850 1906 1962 2032 1913 1977 2249 2313 1913 1977 1913 1977 2249 2313 2377 2457 2297 2369 2675 2747 2297 2369 2297 2369 2675 2747 2819 2909 2518 2598 2938 3018 2518 2598 2518 2598 2938 3018 3098 3198 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 28
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 12x24 U1224 qqqq qq qq $96 $108 $96 $96 $96 12x30 U1230 qqqq qq qq 107 121 107 107 107 12x36 U1236 qqqq qq qq 117 133 117 117 117 12x42 U1242 qqqq qq qq 127 145 127 127 127 12x48 U1248 qqqq qq qq 137 157 137 137 137 12x54 U1254 qqqq qq qq 157 179 157 157 157 12x60 U1260 qqqq qq qq 167 191 167 167 167 12x66 U1266 qqqq qq qq 182 208 182 182 182 12x72 U1272 qqqq qq qq 196 224 196 196 196 12x84 U1284 qqqq qq qq 219 251 219 219 219 12x96 U1296 qqqq qq qq 242 278 242 242 242 15x24 U1524 qqqq qq qq 111.50 124.50 111.50 111.50 111.50 15x30 U1530 qqqq qq qq 121.50 136.50 121.50 121.50 121.50 15x36 U1536 qqqq qq qq 132.50 149.50 132.50 132.50 132.50 15x42 U1542 qqqq qq qq 142.50 161.50 142.50 142.50 142.50 15x48 U1548 qqqq qq qq 152.50 173.50 152.50 152.50 152.50 15x54 U1554 qqqq qq qq 194.50 217.50 194.50 194.50 194.50 15x60 U1560 qqqq qq qq 205.50 230.50 205.50 205.50 205.50 15x66 U1566 qqqq qq qq 217.50 244.50 217.50 217.50 217.50 15x72 U1572 qqqq qq qq 232.50 261.50 232.50 232.50 232.50 15x84 U1584 qqqq qq qq 253.50 286.50 253.50 253.50 253.50 15x96 U1596 qqqq qq qq 276.50 313.50 276.50 276.50 276.50 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 29
EVELOP Rectangular Laminate Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $210 $225.00 $270 $282 $210 $225.00 $210 $225.00 $270 $282 $294 $312 240 257.00 310 324 240 257.00 240 257.00 310 324 338 359 269 289.00 349 365 269 289.00 269 289.00 349 365 381 405 298 320.50 388 406 298 320.50 298 320.50 388 406 424 451 327 352.00 427 447 327 352.00 327 352.00 427 447 467 497 366 393.50 476 498 366 393.50 366 393.50 476 498 520 553 395 425.00 515 539 395 425.00 395 425.00 515 539 563 599 429 461.50 559 585 429 461.50 429 461.50 559 585 611 650 462 497.00 602 630 462 497.00 462 497.00 602 630 658 700 523 563.00 683 715 523 563.00 523 563.00 683 715 747 795 584 629.00 764 800 584 629.00 584 629.00 764 800 836 890 235 251.25 300 313 235 251.25 235 251.25 300 313 326 345.50 264 282.75 339 354 264 282.75 264 282.75 339 354 369 391.50 294 315.25 379 396 294 315.25 294 315.25 379 396 413 438.50 323 346.75 418 437 323 346.75 323 346.75 418 437 456 484.40 352 378.25 457 478 352 378.25 352 378.25 457 478 499 530.50 413 441.75 528 551 413 441.75 413 441.75 528 551 574 608.50 443 474.25 568 593 443 474.25 443 474.25 568 593 618 655.50 474 507.75 609 636 474 507.75 474 507.75 609 636 663 703.50 508 544.25 653 682 508 544.25 508 544.25 653 682 711 754.50 567 608.25 732 765 567 608.25 567 608.25 732 765 798 847.50 628 674.25 813 850 628 674.25 628 674.25 813 850 887 942.50 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 30
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 18x24 U1824 qqqq qq qq $117 $131 $117 $117 $117 18x30 U1830 qqqq qq qq 127 143 127 127 127 18x36 U1836 qqqq qq qq 138 156 138 138 138 18x42 U1842 qqqq qq qq 148 168 148 148 148 18x48 U1848 qqqq qq qq 158 180 158 158 158 18x54 U1854 qqqq qq qq 200 224 200 200 200 18x60 U1860 qqqq qq qq 211 237 211 211 211 18x66 U1866 qqqq qq qq 223 251 223 223 223 18x72 U1872 qqqq qq qq 238 268 238 238 238 18x84 U1884 qqqq qq qq 259 293 259 259 259 18x96 U1896 qqqq qq qq 282 320 282 282 282 20x24 U2024 qqqq qq qq 122.50 137.50 122.50 122.50 122.50 20x30 U2030 qqqq qq qq 132.50 149.50 132.50 132.50 132.50 20x36 U2036 qqqq qq qq 143.50 162.50 143.50 143.50 143.50 20x42 U2042 qqqq qq qq 153.50 174.50 153.50 153.50 153.50 20x48 U2048 qqqq qq qq 163.50 186.50 163.50 163.50 163.50 20x54 U2054 qqqq qq qq 205.50 230.50 205.50 205.50 205.50 20x60 U2060 qqqq qq qq 216.50 243.50 216.50 216.50 216.50 20x66 U2066 qqqq qq qq 228.50 257.50 228.50 228.50 228.50 20x72 U2072 qqqq qq qq 243.50 274.50 243.50 243.50 243.50 20x84 U2084 qqqq qq qq 264.50 299.50 264.50 264.50 264.50 20x96 U2096 qqqq qq qq 287.50 326.50 287.50 287.50 287.50 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 31
EVELOP Rectangular Laminate Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $250 $267.50 $320 $334 $250 $267.50 $250 $267.50 $320 $334 $348 $369 279 299.00 359 375 279 299.00 279 299.00 359 375 391 415 309 331.50 399 417 309 331.50 309 331.50 399 417 435 462 338 363.00 438 458 338 363.00 338 363.00 438 458 478 508 367 394.50 477 499 367 394.50 367 394.50 477 499 521 554 428 458.00 548 572 428 458.00 428 458.00 548 572 596 632 458 490.50 588 614 458 490.50 458 490.50 588 614 640 679 489 524.00 629 657 489 524.00 489 524.00 629 657 685 727 523 560.50 673 703 523 560.50 523 560.50 673 703 733 778 582 624.50 752 786 582 624.50 582 624.50 752 786 820 871 643 690.50 833 871 643 690.50 643 690.50 833 871 909 966 265 283.75 340 355 265 283.75 265 283.75 340 355 370 392.50 294 315.25 379 396 294 315.25 294 315.25 379 396 413 438.50 324 347.75 419 438 324 347.75 324 347.75 419 438 457 485.50 353 379.25 458 479 353 379.25 353 379.25 458 479 500 531.50 382 410.75 497 520 382 410.75 382 410.75 497 520 543 577.50 443 474.25 568 593 443 474.25 443 474.25 568 593 618 655.50 473 506.75 608 635 473 506.75 473 506.75 608 635 662 702.50 504 540.25 649 578 504 540.25 504 540.25 649 578 707 750.50 538 576.75 693 724 538 576.75 538 576.75 693 724 755 801.50 597 640.75 772 807 597 640.75 597 640.75 772 807 842 894.50 658 706.75 853 892 658 706.75 658 706.75 853 892 931 989.50 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 32
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 21x24 U2124 qqqq qq qq $124.50 $139.50 $124.50 $124.50 $124.50 21x30 U2130 qqqq qq qq 135.50 152.50 135.50 135.50 135.50 21x36 U2136 qqqq qq qq 145.50 164.50 145.50 145.50 145.50 21x42 U2142 qqqq qq qq 155.50 176.50 155.50 155.50 155.50 21x48 U2148 qqqq qq qq 166.50 189.50 166.50 166.50 166.50 21x54 U2154 qqqq qq qq 223.50 248.50 223.50 223.50 223.50 21x60 U2160 qqqq qq qq 233.50 260.50 233.50 233.50 233.50 21x66 U2166 qqqq qq qq 244.50 273.50 244.50 244.50 244.50 21x72 U2172 qqqq qq qq 258.50 289.50 258.50 258.50 258.50 21x84 U2184 qqqq qq qq 280.50 315.50 280.50 280.50 280.50 21x96 U2196 qqqq qq qq 302.50 341.50 302.50 302.50 302.50 24x30 U-225 qqqq qq qq 141 159 141 141 141 24x36 U-2-3 qqqq qq qq 152 172 152 152 152 24x42 U-235 qqqq qq qq 162 184 162 162 162 24x48 U-2-4 qqqq qq qq 173 197 173 173 173 24x54 U-245 qqqq qq qq 230 256 230 230 230 24x60 U-2-5 qqqq qq qq 240 268 240 240 240 24x66 U-255 qqqq qq qq 251 281 251 251 251 24x72 U-2-6 qqqq qq qq 266 298 266 266 266 24x84 U-2-7 qqqq qq qq 287 323 287 287 287 24x96 U-2-8 qqqq qq qq 310 350 310 310 310 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 33
EVELOP Rectangular Laminate Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $267 $285.75 $342 $357 $267 $285.75 $267 $285.75 $342 $357 $372 $394.50 297 318.25 382 399 297 318.25 297 318.25 382 399 416 441.50 326 349.75 421 440 326 349.75 326 349.75 421 440 459 487.50 355 381.25 460 481 355 381.25 355 381.25 460 481 502 533.50 385 413.75 500 523 385 413.75 385 413.75 500 523 546 580.50 461 492.25 586 611 461 492.25 461 492.25 586 611 636 673.50 490 523.75 625 652 490 523.75 490 523.75 625 652 679 719.50 520 556.25 665 694 520 556.25 520 556.25 665 694 723 766.50 553 591.75 708 739 553 591.75 553 591.75 708 739 770 816.50 613 656.75 788 823 613 656.75 613 656.75 788 823 858 910.50 673 721.75 868 907 673 721.75 673 721.75 868 907 946 1004.50 312 334.50 402 420 312 334.50 312 334.50 402 420 438 465 342 367.00 442 462 342 367.00 342 367.00 442 462 482 512 371 398.50 481 503 371 398.50 371 398.50 481 503 525 558 401 431.00 521 545 401 431.00 401 431.00 521 545 569 605 477 509.50 607 633 477 509.50 477 509.50 607 633 659 698 506 541.00 646 674 506 541.00 506 541.00 646 674 702 744 536 573.50 686 716 536 573.50 536 573.50 686 716 746 791 570 610.00 730 762 570 610.00 570 610.00 730 762 794 842 629 674.00 809 845 629 674.00 629 674.00 809 845 881 935 690 740.00 890 930 690 740.00 690 740.00 890 930 970 1030 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 34
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 30x36 U25-3 qqqq qq qq $189 $211 $189 $189 $189 30x42 U2535 qqqq qq qq 200 224 200 200 200 30x48 U25-4 qqqq qq qq 210 236 210 210 210 30x54 U2545 qqqq qq qq 245 273 245 245 245 30x60 U25-5 qqqq qq qq 255 285 255 255 255 30x66 U2555 qqqq qq qq 288 320 288 288 288 30x72 U25-6 qqqq qq qq 302 336 302 302 302 30x84 U25-7 qqqq qq qq 324 362 324 324 324 30x96 U25-8 qqqq qq qq 347 389 347 347 347 36x42 U-335 qqqq qq qq 242 268 242 242 242 36x48 U-3-4 qqqq qq qq 253 281 253 253 253 36x54 U-345 qqqq qq qq 326 356 326 326 326 36x60 U-3-5 qqqq qq qq 336 368 336 336 336 36x66 U-355 qqqq qq qq 370 404 370 370 370 36x72 U-3-6 qqqq qq qq 384 420 384 384 384 36x84 U-3-7 qqqq qq qq 405 445 405 405 405 36x96 U-3-8 qqqq qq qq 431 475 431 431 431 36x108 U-3-9 qqqq qq qq 603 651 603 603 603 36x120 U-310 qqqq qq qq 673 725 673 673 673 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 35
EVELOP Rectangular Laminate Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $398 $425.50 $508 $530 $398 $425.50 $398 $425.50 $508 $530 $552 $585 428 458.00 548 572 428 458.00 428 458.00 548 572 596 632 457 489.50 587 613 457 489.50 457 489.50 587 613 639 678 511 546.00 651 679 511 546.00 511 546.00 651 679 707 749 540 577.50 690 720 540 577.50 540 577.50 690 720 750 795 592 632.00 752 784 592 632.00 592 632.00 752 784 816 864 625 667.50 795 829 625 667.50 625 667.50 795 829 863 914 685 732.50 875 913 685 732.50 685 732.50 875 913 951 1008 746 798.50 956 998 746 798.50 746 798.50 956 998 1040 1103 489 521.50 619 645 489 521.50 489 521.50 619 645 671 710 519 554.00 659 687 519 554.00 519 554.00 659 687 715 757 611 648.50 761 791 611 648.50 611 648.50 761 791 821 866 640 680.00 800 832 640 680.00 640 680.00 800 832 864 912 693 735.50 863 897 693 735.50 693 735.50 863 897 931 982 726 771.00 906 942 726 771.00 726 771.00 906 942 978 1032 785 835.00 985 1025 785 835.00 785 835.00 985 1025 1068 1125 849 904.00 1069 1113 849 904.00 849 904.00 1069 1113 1157 1223 1059 1119.00 1299 1347 1059 1119.00 1059 1119.00 1299 1347 1395 1467 1167 1232.00 1427 1479 1167 1232.00 1167 1232.00 1427 1479 1531 1609 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 36
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 42x48 U35-4 qqqq qq qq $263 $293 $263 $263 $263 42x54 U3545 qqqq qq qq 337 369 337 337 337 42x60 U35-5 qqqq qq qq 349 383 349 349 349 42x66 U3555 qqqq qq qq 381 417 381 381 381 42x72 U35-6 qqqq qq qq 395 433 395 395 395 42x78 U3566 qqqq qq qq 406 446 406 406 406 42x84 U35-7 qqqq qq qq 418 460 418 418 418 42x96 U35-8 qqqq qq qq 440 486 440 440 440 42x108 U35-9 qqqq qq qq 615 665 615 615 615 42x120 U3510 qqqq qq qq 684 738 684 684 684 42x144 U3512 qqqq qq qq 865 927 865 865 865 42x192 U3516 qqqq qq qq 1143 1221 1143 1143 1143 42x240 U3520 qqqq qq qq 1360 1454 1360 1360 1360 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 37
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $548 $585.50 $698 $728 $548 $585.50 $548 $585.50 $698 $728 $758 $803 641 681.00 801 833 641 681.00 641 681.00 801 833 865 913 672 714.50 842 876 672 714.50 672 714.50 842 876 910 961 723 768.00 903 939 723 768.00 723 768.00 903 939 975 1029 756 803.50 946 984 756 803.50 756 803.50 946 984 1022 1079 786 836.00 986 1026 786 836.00 786 836.00 986 1026 1066 1126 817 869.50 1027 1069 817 869.50 817 869.50 1027 1069 1111 1174 877 934.50 1107 1153 877 934.50 877 934.50 1107 1153 1199 1268 1090 1152.50 1340 1390 1090 1152.50 1090 1152.50 1340 1390 1440 1515 1197 1264.50 1467 1521 1197 1264.50 1197 1264.50 1467 1521 1575 1656 1454 1531.50 1764 1826 1454 1531.50 1454 1531.50 1764 1826 1888 1981 1884 1981.50 2274 2352 1884 1981.50 1884 1981.50 2274 2352 2430 2547 2253 2370.50 2723 2817 2253 2370.50 2253 2370.50 2723 2817 2911 3052 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 38
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 48x54 U-445 qqqq qq qq $349 $383 $349 $349 $349 48x60 U-4-5 qqqq qq qq 359 395 359 359 359 48x66 U-455 qqqq qq qq 392 430 392 392 392 48x72 U-4-6 qqqq qq qq 406 446 406 406 406 48x78 U-466 qqqq qq qq 419 461 419 419 419 48x84 U-4-7 qqqq qq qq 430 474 430 430 430 48x96 U-4-8 qqqq qq qq 453 501 453 453 453 48x108 U-4-9 qqqq qq qq 627 679 627 627 627 48x120 U-410 qqqq qq qq 697 753 697 697 697 48x144 U-412 qqqq qq qq 876 940 876 876 876 48x156 U-413 qqqq qq qq 935 1003 935 935 935 48x168 U-414 qqqq qq qq 1025 1097 1025 1025 1025 48x180 U-415 qqqq qq qq 1098 1174 1098 1098 1098 48x192 U-416 qqqq qq qq 1156 1236 1156 1156 1156 48x204 U-417 qqqq qq qq 1216 1300 1216 1216 1216 48x216 U-418 qqqq qq qq 1276 1364 1276 1276 1276 48x228 U-419 qqqq qq qq 1335 1427 1335 1335 1335 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 39
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $672 $714.50 $842 $876 $672 $714.50 $672 $714.50 $842 $876 $910 $961 701 746.00 881 917 701 746.00 701 746.00 881 917 953 1007 753 800.50 943 981 753 800.50 753 800.50 943 981 1019 1076 786 836.00 986 1026 786 836.00 786 836.00 986 1026 1066 1126 818 870.50 1028 1070 818 870.50 818 870.50 1028 1070 1112 1175 848 903.00 1068 1112 848 903.00 848 903.00 1068 1112 1156 1222 909 969.00 1149 1197 909 969.00 909 969.00 1149 1197 1245 1317 1121 1186.00 1381 1433 1121 1186.00 1121 1186.00 1381 1433 1485 1563 1229 1299.00 1509 1565 1229 1299.00 1229 1299.00 1509 1565 1621 1705 1484 1564.00 1804 1868 1484 1564.00 1484 1564.00 1804 1868 1932 2028 1581 1666.00 1921 1989 1581 1666.00 1581 1666.00 1921 1989 2057 2159 1709 1799.00 2069 2141 1709 1799.00 1709 1799.00 2069 2141 2213 2321 1820 1915.00 2200 2276 1820 1915.00 1820 1915.00 2200 2276 2352 2466 1916 2016.00 2316 2396 1916 2016.00 1916 2016.00 2316 2396 2476 2596 2014 2119.00 2434 2518 2014 2119.00 2014 2119.00 2434 2518 2602 2728 2112 2222.00 2552 2640 2112 2222.00 2112 2222.00 2552 2640 2728 2860 2209 2324.00 2669 2761 2209 2324.00 2209 2324.00 2669 2761 2853 2991 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 40
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 54x60 U45-5 qqqq qq qq $391 $429 $391 $391 $391 54x66 U4555 qqqq qq qq 403 443 403 403 403 54x72 U45-6 qqqq qq qq 418 460 418 418 418 54x84 U45-7 qqqq qq qq 481 527 481 481 481 54x96 U45-8 qqqq qq qq 503 553 503 503 503 54x108 U45-9 qqqq qq qq 677 731 677 677 677 54x120 U4510 qqqq qq qq 747 805 747 747 747 54x144 U4512 qqqq qq qq 927 993 927 927 927 54x156 U4513 qqqq qq qq 983 1053 983 983 983 54x168 U4514 qqqq qq qq 1075 1149 1075 1075 1075 54x180 U4515 qqqq qq qq 1131 1209 1131 1131 1131 54x192 U4516 qqqq qq qq 1191 1273 1191 1191 1191 54x204 U4517 qqqq qq qq 1251 1337 1251 1251 1251 54x216 U4518 qqqq qq qq 1311 1401 1311 1311 1311 54x228 U4519 qqqq qq qq 1370 1464 1370 1370 1370 54x240 U4520 qqqq qq qq 1410 1508 1410 1410 1410 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 41
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $752 $799.50 $942 $980 $752 $799.50 $752 $799.50 $942 $980 $1018 $1075 783 833.00 983 1023 783 833.00 783 833.00 983 1023 1063 1123 817 869.50 1027 1069 817 869.50 817 869.50 1027 1069 1111 1174 918 975.50 1148 1194 918 975.50 918 975.50 1148 1194 1240 1309 978 1040.50 1228 1278 978 1040.50 978 1040.50 1228 1278 1328 1403 1090 1257.50 1460 1514 1090 1257.50 1090 1257.50 1460 1514 1568 1649 1298 1370.50 1588 1646 1298 1370.50 1298 1370.50 1588 1646 1704 1791 1554 1636.50 1884 1950 1554 1636.50 1554 1636.50 1884 1950 2016 2115 1648 1735.50 1998 2068 1648 1735.50 1648 1735.50 1998 2068 2138 2243 1778 1870.50 2148 2222 1778 1870.50 1778 1870.50 2148 2222 2296 2407 1872 1969.50 2262 2340 1872 1969.50 1872 1969.50 2262 2340 2418 2535 1970 2072.50 2380 2462 1970 2072.50 1970 2072.50 2380 2462 2544 2667 2068 2175.50 2498 2584 2068 2175.50 2068 2175.50 2498 2584 2670 2799 2166 2278.50 2616 2706 2166 2278.50 2166 2278.50 2616 2706 2796 2931 2263 2380.50 2733 2827 2263 2380.50 2263 2380.50 2733 2827 2921 3062 2341 2463.50 2831 2929 2341 2463.50 2341 2463.50 2831 2929 3027 3174 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 42
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 60x66 U-555 qqqq qq qq $485 $527 $485 $485 $485 60x72 U-5-6 qqqq qq qq 499 543 499 499 499 60x84 U-5-7 qqqq qq qq 521 569 521 521 521 60x96 U-5-8 qqqq qq qq 545 597 545 545 545 60x108 U-5-9 qqqq qq qq 728 784 728 728 728 60x120 U-510 qqqq qq qq 798 858 798 798 798 60x144 U-512 qqqq qq qq 977 1045 977 977 977 60x156 U-513 qqqq qq qq 1040 1112 1040 1040 1040 60x168 U-514 qqqq qq qq 1130 1206 1130 1130 1130 60x180 U-515 qqqq qq qq 1192 1272 1192 1192 1192 60x192 U-516 qqqq qq qq 1252 1336 1252 1252 1252 60x204 U-517 qqqq qq qq 1312 1400 1312 1312 1312 60x216 U-518 qqqq qq qq 1372 1464 1372 1372 1372 60x228 U-519 qqqq qq qq 1431 1527 1431 1431 1431 60x240 U-520 qqqq qq qq 1470 1570 1470 1470 1470 60x288 U-524 qqqq qq qq 1678 1794 1678 1678 1678 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 43
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $884 $936.50 $1094 $1136 $884 $936.50 $884 $936.50 $1094 $1136 $1178 $1241 917 972.00 1137 1181 917 972.00 917 972.00 1137 1181 1225 1291 977 1037.00 1217 1265 977 1037.00 977 1037.00 1217 1265 1313 1385 1039 1104.00 1299 1351 1039 1104.00 1039 1104.00 1299 1351 1403 1481 1260 1330.00 1540 1596 1260 1330.00 1260 1330.00 1540 1596 1652 1736 1368 1443.00 1668 1728 1368 1443.00 1368 1443.00 1668 1728 1788 1878 1623 1708.00 1963 2031 1623 1708.00 1623 1708.00 1963 2031 2099 2201 1724 1814.00 2084 2156 1724 1814.00 1724 1814.00 2084 2156 2228 2336 1852 1947.00 2232 2308 1852 1947.00 1852 1947.00 2232 2308 2384 2498 1952 2052.00 2352 2432 1952 2052.00 1952 2052.00 2352 2432 2512 2632 2050 2155.00 2470 2554 2050 2155.00 2050 2155.00 2470 2554 2638 2764 2148 2258.00 2588 2676 2148 2258.00 2148 2258.00 2588 2676 2764 2896 2246 2361.00 2706 2798 2246 2361.00 2246 2361.00 2706 2798 2890 3028 2343 2463.00 2823 2919 2343 2463.00 2343 2463.00 2823 2919 3015 3159 2420 2545.00 2920 3020 2420 2545.00 2420 2545.00 2920 3020 3120 3270 2780 2925.00 3360 3476 2780 2925.00 2780 2925.00 3360 3476 3592 3766 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 44
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 72x66 U-655 qqqq qq qq $622 $668 $622 $622 $622 72x84 U-6-7 qqqq qq qq 660 712 660 660 660 72x96 U-6-8 qqqq qq qq 682 738 682 682 682 72x108 U-6-9 qqqq qq qq 1019 1079 1019 1019 1019 72x120 U-610 qqqq qq qq 1089 1153 1089 1089 1089 72x144 U-612 qqqq qq qq 1272 1344 1272 1272 1272 72x156 U-613 qqqq qq qq 1424 1501 1424 1424 1424 72x168 U-614 qqqq qq qq 1516 1596 1516 1516 1516 72x180 U-615 qqqq qq qq 1577 1661 1577 1577 1577 72x192 U-616 qqqq qq qq 1636 1724 1636 1636 1636 72x204 U-617 qqqq qq qq 1696 1788 1696 1696 1696 72x216 U-618 qqqq qq qq 1756 1852 1756 1756 1756 72x228 U-619 qqqq qq qq 1815 1915 1815 1815 1815 72x240 U-620 qqqq qq qq 1855 1959 1855 1855 1855 72x288 U-624 qqqq qq qq 2063 2183 2063 2063 2063 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 45
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $1059 $1116.50 $1289 $1335 $1059 $1116.50 $1059 $1116.50 $1289 $1335 $1381 $1450 1154 1219.00 1414 1466 1154 1219.00 1154 1219.00 1414 1466 1518 1596 1214 1284.00 1494 1550 1214 1284.00 1214 1284.00 1494 1550 1606 1690 1589 1664.00 1889 1949 1589 1664.00 1589 1664.00 1889 1949 2009 2099 1697 1777.00 2017 2081 1697 1777.00 1697 1777.00 2017 2081 2145 2241 1956 2046.00 2316 2388 1956 2046.00 1956 2046.00 2316 2388 2460 2568 2147 2242.00 2527 2603 2147 2242.00 2147 2242.00 2527 2603 2679 2793 2276 2376.00 2676 2756 2276 2376.00 2276 2376.00 2676 2756 2836 2956 2375 2480.00 2795 2879 2375 2480.00 2375 2480.00 2795 2879 2963 3089 2472 2582.00 2912 3000 2472 2582.00 2472 2582.00 2912 3000 3088 3220 2570 2685.00 3030 3122 2570 2685.00 2570 2685.00 3030 3122 3214 3352 2668 2788.00 3148 3244 2668 2788.00 2668 2788.00 3148 3244 3340 3484 2765 2890.00 3265 3365 2765 2890.00 2765 2890.00 3265 3365 3465 3615 2843 2973.00 3363 3467 2843 2973.00 2843 2973.00 3363 3467 3571 3727 3203 3353.00 3803 3923 3203 3353.00 3203 3353.00 3803 3923 4043 4223 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 46
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 84x66 U-55 qqqq qq qq $661 $771 $661 $661 $661 84x72 U7-6 qqqq qq qq 681 733 681 681 681 84x96 U-7-8 qqqq qq qq 721 781 721 721 721 84x108 U-7-9 qqqq qq qq 1058 1122 1058 1058 1058 84x120 U-710 qqqq qq qq 1128 1196 1128 1128 1128 84x144 U-712 qqqq qq qq 1257 1321 1257 1257 1257 84x156 U-713 qqqq qq qq 1464 1544 1464 1464 1464 84x168 U-714 qqqq qq qq 1555 1639 1555 1555 1555 84x180 U-715 qqqq qq qq 1616 1704 1616 1616 1616 84x192 U-716 qqqq qq qq 1675 1767 1675 1675 1675 84x204 U-717 qqqq qq qq 1735 1831 1735 1735 1735 84x216 U-718 qqqq qq qq 1795 1895 1795 1795 1795 84x228 U-719 qqqq qq qq 1854 1958 1854 1854 1854 84x240 U-720 qqqq qq qq 1894 2002 1894 1894 1894 84x288 U-724 qqqq qq qq 2102 2226 2102 2102 2102 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 47
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $1136 $1198.50 $1386 $1436 $1136 $1198.50 $1136 $1198.50 $1386 $1436 $1486 $1561 1175 1240.00 1435 1487 1175 1240.00 1175 1240.00 1435 1487 1539 1617 1291 1366.00 1591 1651 1291 1366.00 1291 1366.00 1591 1651 1711 1801 1666 1746.00 1986 2050 1666 1746.00 1666 1746.00 1986 2050 2114 2210 1774 1859.00 2114 2182 1774 1859.00 1774 1859.00 2114 2182 2250 2352 1865 1945.00 2185 2249 1865 1945.00 1865 1945.00 2185 2249 2313 2409 2224 2324.00 2624 2704 2224 2324.00 2224 2324.00 2624 2704 2784 2904 2353 2458.00 2773 2857 2353 2458.00 2353 2458.00 2773 2857 2941 3067 2452 2562.00 2892 2980 2452 2562.00 2452 2562.00 2892 2980 3068 3200 2549 2664.00 3009 3101 2549 2664.00 2549 2664.00 3009 3101 3193 3331 2647 2767.00 3127 3223 2647 2767.00 2647 2767.00 3127 3223 3319 3463 2745 2870.00 3245 3345 2745 2870.00 2745 2870.00 3245 3345 3445 3595 2842 2972.00 3362 3466 2842 2972.00 2842 2972.00 3362 3466 3570 3726 2920 3055.00 3460 3568 2920 3055.00 2920 3055.00 3460 3568 3676 3838 3280 3435.00 3900 4024 3280 3435.00 3280 3435.00 3900 4024 4148 4334 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 48
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 96x66 U-855 qqqq qq qq $855 $909 $855 $855 $855 96x72 U-8-6 qqqq qq qq 869 925 869 869 869 96x84 U-8-8 qqqq qq qq 888 946 888 888 888 96x108 U-8-9 qqqq qq qq 1097 1165 1097 1097 1097 96x120 U-810 qqqq qq qq 1167 1239 1167 1167 1167 96x144 U-812 qqqq qq qq 1347 1427 1347 1347 1347 96x156 U-813 qqqq qq qq 1493 1577 1493 1493 1493 96x168 U-814 qqqq qq qq 1584 1672 1584 1584 1584 96x180 U-815 qqqq qq qq 1711 1803 1711 1711 1711 96x192 U-816 qqqq qq qq 1771 1867 1771 1771 1771 96x240 U-820 qqqq qq qq 1989 2101 1989 1989 1989 96x288 U-824 qqqq qq qq 2216 2348 2216 2216 2216 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 49
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $1368 $1435.50 $1638 $1692 $1368 $1435.50 $1368 $1435.50 $1638 $1692 $1746 $1827 1401 1471.00 1681 1737 1401 1471.00 1401 1471.00 1681 1737 1793 1877 1439 1511.50 1729 1787 1439 1511.50 1439 1511.50 1729 1787 1845 1932 1743 1828.00 2083 2151 1743 1828.00 1743 1828.00 2083 2151 2219 2321 1851 1941.00 2211 2283 1851 1941.00 1851 1941.00 2211 2283 2355 2463 2107 2207.00 2507 2587 2107 2207.00 2107 2207.00 2507 2587 2667 2787 2291 2396.00 2711 2795 2291 2396.00 2291 2396.00 2711 2795 2879 3005 2420 2530.00 2860 2948 2420 2530.00 2420 2530.00 2860 2948 3036 3168 2585 2700.00 3045 3137 2585 2700.00 2585 2700.00 3045 3137 3229 3367 2683 2803.00 3163 3259 2683 2803.00 2683 2803.00 3163 3259 3355 3499 3053 3193.00 3613 3725 3053 3193.00 3053 3193.00 3613 3725 3837 4005 3470 3635.00 4130 4262 3470 3635.00 3470 3635.00 4130 4262 4394 4592 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 50
Rectangular Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 108x24 U-9-2 qqqq qq qq $601 $645 $601 $601 $601 108x30 U-935 qqqq qq qq 620 666 620 620 620 108x66 U-955 qqqq qq qq 914 972 914 914 914 108x72 U-9-6 qqqq qq qq 929 989 929 929 929 108x84 U-9-7 qqqq qq qq 953 1017 953 953 953 108x96 U-9-8 qqqq qq qq 975 1043 975 975 975 108x120 U-910 qqqq qq qq 1238 1314 1238 1238 1238 108x144 U-912 qqqq qq qq 1417 1501 1417 1417 1417 108x156 U-913 qqqq qq qq 1568 1656 1568 1568 1568 108x168 U-914 qqqq qq qq 1659 1751 1659 1659 1659 108x180 U-915 qqqq qq qq 1817 1913 1817 1817 1817 108x192 U-916 qqqq qq qq 1877 1977 1877 1877 1877 108x204 U-917 qqqq qq qq 1937 2041 1937 1937 1937 108x216 U-918 qqqq qq qq 1997 2105 1997 1997 1997 108x228 U-919 qqqq qq qq 2056 2168 2056 2056 2056 108x240 U-920 qqqq qq qq 2096 2212 2096 2096 2096 108x288 U-924 qqqq qq qq 2304 2436 2304 2304 2304 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 51
EVELOP Rectangular Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $1019 $1074.00 $1239 $1283 $1019 $1074.00 $1019 $1074.00 $1239 $1283 $1327 $1393 1057 1114.50 1287 1333 1057 1114.50 1057 1114.50 1287 1333 1379 1448 1465 1537.50 1755 1813 1465 1537.50 1465 1537.50 1755 1813 1871 1958 1499 1574.00 1799 1859 1499 1574.00 1499 1574.00 1799 1859 1919 2009 1561 1641.00 1881 1945 1561 1641.00 1561 1641.00 1881 1945 2009 2105 1621 1706.00 1961 2029 1621 1706.00 1621 1706.00 1961 2029 2097 2199 1960 2055.00 2340 2416 1960 2055.00 1960 2055.00 2340 2416 2492 2606 2215 2320.00 2635 2719 2215 2320.00 2215 2320.00 2635 2719 2803 2929 2404 2514.00 2844 2932 2404 2514.00 2404 2514.00 2844 2932 3020 3152 2533 2648.00 2993 3085 2533 2648.00 2533 2648.00 2993 3085 3177 3315 2729 2849.00 3209 3305 2729 2849.00 2729 2849.00 3209 3305 3401 3545 2827 2952.00 3327 3427 2827 2952.00 2827 2952.00 3327 3427 3527 3677 2925 3055.00 3445 3549 2925 3055.00 2925 3055.00 3445 3549 3653 3809 3023 3158.00 3563 3671 3023 3158.00 3023 3158.00 3563 3671 3779 3941 3120 3260.00 3680 3792 3120 3260.00 3120 3260.00 3680 3792 3904 4072 3198 3343.00 3778 3894 3198 3343.00 3198 3343.00 3778 3894 4010 4184 3558 3723.00 4218 4350 3558 3723.00 3558 3723.00 4218 4350 4482 4680 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 52
Rectangular & oat Laminate Tops EVELOP MOEL NUMER MOEL Rectangle Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 120x24 U10-2 qqqq qq qq $940 $640 $940 $940 $940 120x30 U1035 qqqq qq qq 659 659 659 659 659 120x66 U1055 qqqq qq qq 943 943 943 943 943 120x144 U1012 qqqq qq qq 1146 1446 1146 1146 1146 120x156 U1013 qqqq qq qq 1597 1597 1597 1597 1597 120x168 U1014 qqqq qq qq 1688 1688 1688 1688 1688 120x180 U1015 qqqq qq qq 1846 1846 1846 1846 1846 120x192 U1016 qqqq qq qq 1906 1906 1906 1906 1906 120x240 U1020 qqqq qq qq 2124 2124 2124 2124 2124 120x288 U1024 qqqq qq qq 2332 2332 2332 2332 2332 oat 24x30x60 UT25-5 qqqq qq qq 297 327 297 297 297 30x36x72 UT25-6 qqqq qq qq 442 478 442 442 442 30x36x96 UT25-8 qqqq qq qq 496 540 496 496 496 36x42x84 UT-3-7 qqqq qq qq 483 525 483 483 483 36x48x96 UT-3-8 qqqq qq qq 525 573 525 525 525 36x48x120 UT-310 qqqq qq qq 798 854 798 798 798 36x48x144 UT-312 qqqq qq qq 1000 1064 1000 1000 1000 42x60x192 UT3516 qqqq qq qq 1425 1509 1425 1425 1425 48x60x192 UT-416 qqqq qq qq 1469 1559 1469 1469 1469 48x60x240 UT-420 qqqq qq qq 1674 1774 1674 1674 1674 48x60x288 UT-424 qqqq qq qq 1912 2028 1912 1912 1912 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 53
EVELOP Rectangular & oat Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $1096 $1156.00 $1336 $1384 $1096 $1156.00 $1096 $1156.00 $1336 $1384 $1432 $1504 1134 1196.50 1384 1434 1134 1196.50 1134 1196.50 1384 1434 1484 1559 1532 1609.50 1842 1904 1532 1609.50 1532 1609.50 1842 1904 1966 2059 2282 2392.00 2722 2810 2282 2392.00 2282 2392.00 2722 2810 2898 3030 2471 2586.00 2931 3023 2471 2586.00 2471 2586.00 2931 3023 3115 3253 2600 2720.00 3080 3176 2600 2720.00 2600 2720.00 3080 3176 3272 3416 2796 2921.00 3296 3396 2796 2921.00 2796 2921.00 3296 3396 3496 3646 2894 3024.00 3414 3518 2894 3024.00 2894 3024.00 3414 3518 3622 3778 3264 3414.00 3864 3984 3264 3414.00 3264 3414.00 3864 3984 4104 4284 3624 3794.00 4304 4440 3624 3794.00 3624 3794.00 4304 4440 4576 4780 702 732 859.50 889.50 702 732 702 732 859.50 889.50 919.50 957 928 964 1117.00 1153.00 928 964 928 964 1117.00 1153.00 1189.00 1234 1090 1134 1321.00 1365.00 1090 1134 1090 1134 1321.00 1365.00 1409.00 1464 1050 1092 1270.50 1312.50 1050 1092 1050 1092 1270.50 1312.50 1354.50 1407 1173 1221 1425.00 1473.00 1173 1221 1173 1221 1425.00 1473.00 1521.00 1581 1554 1610 1848.00 1904.00 1554 1610 1554 1610 1848.00 1904.00 1960.00 2030 1864 1928 2200.00 2264.00 1864 1928 1864 1928 2200.00 2264.00 2328.00 2408 2559 2643 3000.00 3084.00 2559 2643 2559 2643 3000.00 3084.00 3168.00 3273 2684 2774 3156.50 3246.50 2684 2774 2684 2774 3156.50 3246.50 3336.50 3449 3024 3124 3549.00 3649.00 3024 3124 3024 3124 3549.00 3649.00 3749.00 3874 3478 3594 4087.00 4203.00 3478 3594 3478 3594 4087.00 4203.00 4319.00 4464 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 54
Half Round, Trapezoid & rescent Laminate Tops EVELOP MOEL NUMER MOEL Half Round Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 24 UH-2 qqqq qq qq $135 $151 $135 $135 $135 30 UH25 qqqq qq qq 170 190 170 170 170 36 UH-3 qqqq qq qq 195 219 195 195 195 42 UH35 qqqq qq qq 223 251 223 223 223 48 UH-4 qqqq qq qq 249 281 249 249 249 54 UH45 qqqq qq qq 330 366 330 330 330 60 UH-5 qqqq qq qq 354 394 354 354 354 72 UH-6 qqqq qq qq 510 558 510 510 510 84 UH-7 qqqq qq qq 562 618 562 562 562 96 UH-8 qqqq qq qq 616 680 616 616 616 108 UH-9 qqqq qq qq 877 949 877 877 877 120 UH10 qqqq qq qq 1025 1105 1025 1025 1025 Trapezoid 24X28 UT-2-4 qqqq qq qq 203 227 203 203 203 30X60 UT25-5 qqqq qq qq 297 327 297 297 297 36X72 UT-3-6 qqqq qq qq 514 550 514 514 514 48x24x76 U-2-4 qqqq qq qq 463 505 463 463 463 rescent 60x24x94 U-2-5 qqqq qq qq 597 649 597 597 597 48x30x76 U25-4 qqqq qq qq 479 521 479 479 479 60x30x94 U25-5 qqqq qq qq 606 658 606 606 606 60x36x94 U-3-5 qqqq qq qq 615 667 615 615 615 72x36x112 U-3-6 qqqq qq qq 1118 1180 1118 1118 1118 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 55
EVELOP Half Round, Trapezoid & rescent Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $351 $367 $435 $451 $351 $367 $351 $367 $435 $451 $467 $487 440 460 545 565 440 460 440 460 545 565 585 610 519 543 645 669 519 543 519 543 645 669 693 723 601 629 748 776 601 629 601 629 748 776 804 839 681 713 849 881 681 713 681 713 849 881 913 953 816 852 1005 1041 816 852 816 852 1005 1041 1077 1122 894 934 1104 1144 894 934 894 934 1104 1144 1184 1234 1158 1206 1410 1458 1158 1206 1158 1206 1410 1458 1506 1566 1318 1374 1612 1668 1318 1374 1318 1374 1612 1668 1724 1794 1480 1544 1816 1880 1480 1544 1480 1544 1816 1880 1944 2024 1849 1921 2227 2299 1849 1921 1849 1921 2227 2299 2371 2461 2105 2185 2525 2605 2105 2185 2105 2185 2525 2605 2685 2785 527 551 653.00 677.00 527 551 527 551 653.00 677.00 701.00 731 702 732 859.50 889.50 702 732 702 732 859.50 889.50 919.50 957 1000 1036 1189.00 1225.00 1000 1036 1000 1036 1189.00 1225.00 1261.00 1306 1030 1072 1250.50 1292.50 1030 1072 1030 1072 1250.50 1292.50 1334.50 1387 1299 1351 1572.00 1624.00 1299 1351 1299 1351 1572.00 1624.00 1676.00 1741 1046 1088 1266.50 1308.50 1046 1088 1046 1088 1266.50 1308.50 1350.50 1403 1308 1360 1581.00 1633.00 1308 1360 1308 1360 1581.00 1633.00 1685.00 1750 317 1369 1590.00 1642.00 317 1369 317 1369 1590.00 1642.00 1694.00 1759 1955 207 2280.50 2342.50 1955 207 1955 207 2280.50 2342.50 2404.50 2482 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 56
Racetrack Laminate Tops EVELOP MOEL NUMER MOEL Racetrack Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 36x60 URT-3-5 qqqq qq qq $388 $420 $388 $388 $388 36x72 URT-3-6 qqqq qq qq 442 478 442 442 442 36x84 URT-3-7 qqqq qq qq 468 508 468 468 468 36x96 URT-3-8 qqqq qq qq 496 540 496 496 496 42x72 URT35-6 qqqq qq qq 456 494 456 456 456 42x78 URT3565 qqqq qq qq 481 523 481 481 481 42x84 URT35-7 qqqq qq qq 483 525 483 483 483 48x96 URT-4-8 qqqq qq qq 525 573 525 525 525 48x120 URT-410 qqqq qq qq 798 854 798 798 798 54x96 URT45-8 qqqq qq qq 852 632 852 852 852 54x120 URT4510 qqqq qq qq 855 913 855 855 855 54x144 URT4512 qqqq qq qq 1056 1122 1056 1056 1056 54x168 URT4513 qqqq qq qq 1223 1297 1223 1223 1223 54x192 URT4516 qqqq qq qq 1357 1439 1357 1357 1357 54x216 URT4518 qqqq qq qq 1493 1583 1493 1493 1493 54x240 URT4520 qqqq qq qq 1606 1704 1606 1606 1606 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 57
EVELOP Racetrack Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $820 $852 $988.00 $1020.00 $820 $852 $820 $852 $988.00 $1020.00 $1052.00 $1092 928 964 1117.00 1153.00 928 964 928 964 1117.00 1153.00 1189.00 1234 1008 1048 1218.00 1258.00 1008 1048 1008 1048 1218.00 1258.00 1298.00 1348 1090 1134 1321.00 1365.00 1090 1134 1090 1134 1321.00 1365.00 1409.00 1464 969 1007 1168.50 1206.50 969 1007 969 1007 1168.50 1206.50 1244.50 1292 1048 1090 1268.50 1310.50 1048 1090 1048 1090 1268.50 1310.50 1352.50 1405 1050 1092 1270.50 1312.50 1050 1092 1050 1092 1270.50 1312.50 1354.50 1407 1173 1221 1425.00 1473.00 1173 1221 1173 1221 1425.00 1473.00 1521.00 1581 1554 1610 1848.00 1904.00 1554 1610 1554 1610 1848.00 1904.00 1960.0 2030 1257 1307 1519.50 1569.50 1257 1307 1257 1307 1519.50 1569.50 1619.50 1682 1638 1696 1942.50 2000.50 1638 1696 1638 1696 1942.50 2000.50 2058.50 2131 1947 2013 2293.50 2359.50 1947 2013 1947 2013 2293.50 2359.50 2525.50 2508 2222 2296 2610.50 2684.50 2222 2296 2222 2296 2610.50 2684.50 2758.50 2851 2464 2546 2894.50 2976.50 2464 2546 2464 2546 2894.50 2976.50 3058.50 3161 2708 2798 3180.50 3270.50 2708 2798 2708 2798 3180.50 3270.50 3360.50 3473 2929 3027 3443.50 3541.50 2929 3027 2929 3027 3443.50 3541.50 3639.50 3762 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 58
-Shape Laminate Tops EVELOP MOEL NUMER MOEL -Shape Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 24x30 U-225 qqqq qq qq $166 $184 $166 $166 $166 24x36 U-2-3 qqqq qq qq 178 198 178 178 178 24x42 U-235 qqqq qq qq 191 213 191 191 191 24x48 U-2-4 qqqq qq qq 204 228 204 204 204 24x54 U-245 qqqq qq qq 268 294 268 268 268 24x60 U-2-5 qqqq qq qq 280 308 280 280 280 24x66 U-255 qqqq qq qq 294 324 294 294 294 24x72 U-2-6 qqqq qq qq 310 342 310 310 310 24x84 U-2-7 qqqq qq qq 336 372 336 336 336 24x96 U-2-8 qqqq qq qq 363 403 363 363 363 30x36 U25-3 qqqq qq qq 220 242 220 220 220 30x42 U2535 qqqq qq qq 233 257 233 233 233 30x48 U25-4 qqqq qq qq 245 271 245 245 245 30x54 U2545 qqqq qq qq 285 313 285 285 285 30x60 U25-5 qqqq qq qq 298 328 298 298 298 30x66 U2555 qqqq qq qq 335 367 335 335 335 30x72 U25-6 qqqq qq qq 352 386 352 352 352 30x84 U25-7 qqqq qq qq 378 416 378 378 378 30x96 U25-8 qqqq qq qq 405 447 405 405 405 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 59
EVELOP -Shape Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $409 $427 $503.50 $521.50 $409 $427 $409 $427 $503.50 $521.50 $239.50 $562 448 468 553.00 573.00 448 468 448 468 553.00 573.00 593.00 618 488 510 603.50 625.50 488 510 488 510 603.50 625.50 647.50 675 528 552 654.00 678.00 528 552 528 552 654.00 678.00 702.00 732 619 645 755.50 781.50 619 645 619 645 755.50 781.50 807.50 840 658 686 805.00 833.00 658 686 658 686 805.00 833.00 861.00 896 699 729 856.50 886.50 699 729 699 729 856.50 886.50 916.50 854 742 774 910.00 942.00 742 774 742 774 910.00 942.00 974.00 1014 822 858 1011.00 1047.00 822 858 822 858 1011.00 1047.00 1083.00 1128 903 943 1113.00 1153.00 903 943 903 943 1113.00 1153.00 1193.00 1243 517 539 632.50 654.50 517 539 517 539 632.50 654.50 676.50 704 557 581 683.00 707.00 557 581 557 581 683.00 707.00 731.00 761 596 622 732.50 758.50 596 622 596 622 732.50 758.50 784.50 817 663 691 810.0 838.00 663 691 663 691 810.0 838.00 866.00 901 703 733 860.50 890.50 703 733 703 733 860.50 890.50 920.50 958 767 799 935.00 967.00 767 799 767 799 935.00 967.00 999.00 1039 811 845 989.50 1023.50 811 845 811 845 989.50 1023.50 1057.50 1100 891 929 1090.50 1128.50 891 929 891 929 1090.50 1128.50 1166.50 1214 972 1014 1192.50 1234.50 972 1014 972 1014 1192.50 1234.50 1276.50 1329 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 60
-Shape Laminate Tops EVELOP MOEL NUMER MOEL -Shape Size asic Model Edge Style Edge olor Surface Finish PV Edge (74P) Fluted PV (-P) ullnose (54) Thin ullnose (56) Self Edge (64E) 36x42 U-335 qqqq qq qq $280 $306 $280 $280 $280 36x48 U-3-4 qqqq qq qq 293 321 293 293 293 36x54 U-345 qqqq qq qq 376 406 376 376 376 36x60 U-3-5 qqqq qq qq 388 420 388 388 388 36x66 U-355 qqqq qq qq 425 459 425 425 425 36x72 U-3-6 qqqq qq qq 442 478 442 442 442 36x84 U-3-7 qqqq qq qq 468 508 468 468 468 36x96 U-3-8 qqqq qq qq 496 540 496 496 496 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. HOW TO UIL MOEL NUMER Select edge style. 74P = PV Edge P = Fluted Edge 54 =1-1/4 Vinyl ullnose 56 = Thin ullnose 64E = 1-1/4 Self-edge 34S= 1-1/4 Wood and Edge 15W= 1-3/4 Wood ullnose 36S= 1-3/4 Wood and Edge 24S= 1-1/4 Square Wood, Square orner STP= Step Edge KNF= Knife Edge * Edge Wood Type, Specify herry () or Maple (M)* Select edge color. L = lack LG S WG FN F HM NO O HT W RW MM M W WY T PV FM SF P = Light Tone = Sand = Warm Grey = Flannel = afe au Lait = Hardrock Maple = Natural = astle Oak = Montana Walnut = Wild herry = Regency Walnut = Monticello Maple = iltmore herry = righton Walnut = Windsor Mahogany = ocobala = hocolate Pear Tree = Provincial = Fusion Maple = Summer Flame = Other Standard olors Select surface finish. SP = Standard Laminate P = ustomer Specified Laminate 61
EVELOP -Shape Laminate XX ases Tops Wood Edges 34S Maple 34S herry 15W Maple 15W herry 36S Maple 36S herry 24S (Square) Maple 24S (Square) herry Step Maple Step herry Knife Maple Knife herry $631 $657 $767.50 $793.50 $631 $657 $631 $657 $767.50 $793.50 $819.50 $852 671 699 818.00 846.00 671 699 671 699 818.00 846.00 874.00 909 781 811 938.50 968.50 781 811 781 811 938.50 968.50 998.50 1036 820 852 988.00 1020.00 820 852 820 852 988.00 1020.00 1052.00 1092 884 918 1062.50 1096.50 884 918 884 918 1062.50 1096.50 1130.50 1173 928 964 1117.00 1153.00 928 964 928 964 1117.00 1153.00 1189.00 1234 1008 1048 1218.00 1258.00 1008 1048 1008 1048 1218.00 1258.00 1298.00 1348 1090 1134 1321.00 1365.00 1090 1134 1090 1134 1321.00 1365.00 1409.00 1464 2. Model number, including options. See How to uild a 3. ny special service lpha-numeric characters in place of indicate that no other alternatives are available. PRIING INFORMTION Standard iscount Method for Products in this Price List for all SI ustomers: 56% iscount for Product Only For dock delivery add 5% of discretion of SI and is dependent upon PROUT WILL OME UNSSEMLE UNLESS ORERE INSTLLE. 62
uying from SI can make a real difference. EVELOP You are supporting Wisconsin companies, which add to the tax base and employ our taxpaying citizens. You are helping save taxpayer money through promotion of successful reintegration of offenders into our communities. You are promoting environmental responsibility through the use of green products and development of alternative fuels. Revenues earned are reinvested in recycling initiatives to keep our landfills safe of pollutants. Revenues are used to develop meaningful vocational programs for training inmates for release. You are helping us make our institutions safer by reducing inmate idleness. Low Prices! It s Quick and Easy! One stop shopping for a wide variety of quality products. SI Showroom and usiness Office 3099 East Washington ve.. Madison, Wisconsin 53704 PHONE: 608-240-5200 FX: 608-240-3321 TOLL FREE: 800-862-1086 Web site: www.buybsi.com