Media Storage and Transportation

Transcription

1 Media Storage and Transportation Media Cases NER offers a variety of media cases for movement of media both within the tape library and to offsite locations. DCT Cases Durable blow-molded outer shell High-density, anti static foam padding cushions protect packs Non-textured inventory label area and Removable 20 Packs 14 w x 7.5 h x 15 d - accommodates 1 media pack* 26 w x 7.5 h x 15 d - accommodates 2 media packs* Disaster Recovery Cases ATA approved Durable two-layer construction features #1 AB grade plywood covered with a protective layer of.040: high impact industrial grade ABS. Edges protected by angle extruded, heat treated aluminum 14 gauge, zinc plated steel ball corners Steel handle retract out of the way Locking steel latches and Removable 20 Packs 14 w x 8 h x 13.5 d - accommodates 1 media pack* 27 w x 8 h x 13.5 d - accommodates 2 media packs* 40 w x 8 h x 13.5 d - accommodates 3 media packs* * Actual media capacity will vary depending on media type being stored

2 Media Cases Pac-Tote Case Sturdy injection molded construction Interlocking lid prevents dust and moisture from entering case Stackable, lockable Ergonomic, molded-in handle and Removable 20 Packs 27 w x 12.3 h x 18 d - accommodates 4 media packs* Drive-Top Staging Racks Drive-Top Staging Racks and Cartrisels provide convenient staging or table-top storage for frequently used media. Accommodates all of today s most popular media including DLT, DLT IV, SDLT and LTO Drive-Top Staging Racks come in widths to accommodate one or two media packs. The cartrisel is a rotating style rack which holds 8 packs * Actual media capacity will vary depending on media type being stored

3 Media Carts NER offers Production Carts and Off-Site Carts for moving media within or between facilities. Production Carts Moving media with your data center is a breeze with NER s Production Carts. Rugged with a lean profile, these carts can stand up to the abuse, fit down the narrowest of aisles and still come back for more! All welded cold-rolled steel construction Rubber bumper comes in contact with base plate, not packs, thus eliminating accidental pack or tape damage Smooth rolling 2-1/2 casters; two swivel, two fixed 880 lbs. total load rating Sturdy welded steel handles 24 w x 41.5 h x 22 d Accommodates 14 media packs* *Actual media capacity will vary depending on media type being stored Off-Site Carts This rugged cart is designed for transporting media to off-site storage locations. Tapes are stored in Flex-Paks or Removable 20 packs. With the doors open, all tapes are visible for easy identification and barcode scanning. Rugged, heavy gauge steel design Heavy duty casters, (two swivel with brake and two fixed) Steel-reinforced corner bumpers Total load rating of 3000 lbs. Removable doors have foam lining and a two-point latch and lock system to protect packs and media w x 56.5 h x 20 d Accommodates 24 Flex-Paks or 24 Removable 20 Packs* *Actual media capacity will vary depending on media type being stored

4 Multimedia Filing Cabinet Store and secure all your media. Accommodates all of today s most popular media including DLT, DLT IV, SDLT and LTO Built to last with all-welded, sturdy furniture-grade sheet metal One lock conveniently and securely locks the entire cabinet Heavy-duty ball bearing glides provide smooth drawer operation 9 user-configurable drawers allow you to store your media to best fit your needs. Cabinets can be configured to store multiple types of media within the same unit. All drawers are the same size Media dividers for drawer configuration are included with the cabinet Anti-tip mechanism safely allows only one drawer to be accessed at a time Ships fully assembled MMC Wide Unit Cabinet 36 w x h x 18 d Drawer w x 6.5 h x 17.5 d Media Capacity Per Drawer / Per unit 4mm 240 / mm 126 / 1134 DLT 77 / /3490/ / 693 CDR/Optical 204 / 1836 LTO 77 / 693 VHS 52 / 468 MMC Wide Unit Cabinet 42 w x h x 18 d Drawer w x 6.5 h x 17.5 d Media Capacity Per Drawer / Per unit 4mm 288 / mm 162 / 1458 DLT 88 / /3490/ / 792 CDR/Optical 238 / 2142 LTO 88 / 792 VHS 52 / 468

5 Traditional Racks Store all of today s most popular media. Hard working. Reliable. Versatile. Accommodates all of today s most popular media including DLT, DLT IV, SDLT and LTO Single sided and double sided racks. 8 sizes and capacities to choose from. All welded, 18 gauge cold-rolled steel construction. Angled base design. Flex-Pak allow for custom configuration Flex-Pak are removable and can placed in our media transportation products for movement within your location or to an off-site facility. Additional information about Flex-Pak is available on our website.

6 par a gon Data center floor space is the most valuable real estate in the country. With NER s par a gon High Density Storage Solution you maximize your storage capacity and recover that valuable floor space. par a gon DLT For - DLT - DLT IV - Super DLT Features DLT Capacity: - Double-sided base rack: Single-sided base racks & sliders: 672 Packs are designed to hold the DLT tape inside the plastic case for maximum protection Straight tower design has one of the smallest footprints in the industry Seamless slider tracks span the entire length of the base rack and precision hardened steel wheels provide fluid slider panel movement NER also offers the premier par a gon high density storage solution for 3480, 3490, 3590 and 9840 media. par a gontm DLT racks can be seamlessly installed into libraries that have par a gontm 17-high 3480/3490 racks. Both products have the same height, depth and finish, allowing DLT units to be positioned next to 3480/3490 products. Slider tracks will span and accommodate both types of units. (note: existing par a gontm 3480/3490 racks cannot be retrofitted with DLT packs) DLS0672 Single-sided base rack Capacity: W x 8 D x 84 H DLD1344 (pictured) Double-sided base rack Capacity: W x 15.5 D x 84 H DLSL0672 Slider panel Capacity: W x 6.7 D x 84 H Durable one piece injection molded plastic pack 7 individual spring-loaded slots Ability to install integrated barcode slot labels. Slot labels can be installed without removing packs from the rack Strip label area on front face of pack

7 Media Packs FlexPak User configurable multimedia storage that fits into most manufacturers steel tape racks Save money by updating your current storage system to accommodate most any media! You can even mix media within the same pack! Locking clips enable easy installation and removal -- ideal for vaulting! Part # Media Type Capacity FLX2000 DLT, DLT IV, SDLT 14 FLX3000 Video 7 FLX4000 4mm 28 FLX5000 8mm, 1/4 mini 24 FLX6000 Magstar, FLX M.O 14 FLX CDR 20 FLX9000 LTO 16 Removable 20 Pack Stores 3480/3490 media Injection molded using high-impact polystyrene Flange design accommodates rack slot labels Clips into racks, carts and cases and is easily removable for movement around the data center 11.5 w x 11.8 h x 4.3 d Media Packs work with the following media storage and transportation products: - Traditional Storage Racks - Drive Top Staging Racks - Off-Site Carts - Production Carts - DCT Cases - Disaster Recovery Cases - Pac-Tote Cases