Measurement units NEW diris_824_a_1_cat Energy monitoring and management of low voltage/ high voltage electrical installations Function are measurement units which can provide all the functions offered by the DIRIS A40, and which also allow the user to detect events that may harm the installation, linking these to a graphic representation. All this information can be used and analysed remotely using quality measurement software. Conformity to standards IEC 61557-12 IEC 62053-22 class 0,5 S IEC 62053-23 class 2 Applications diris_826_a_1_gb_cat In addition to the functions of the DIRIS A40, the also: shows the current and voltage unbalance shows the tangent phi stores the load curves (50 days with an interval of 10 minutes) for: Active, reactive and apparent power: ΣP+/- ; ΣQ+/-, ΣS. detects and stores the last 40 events concerning: - overvoltage - voltage dips - outages - overcurrent For each stored event, the DIRIS A60 records the relevant RMS 1/2 interval curves for the voltages V1, V2, V3, U12, U23, U31 and the currents,,, In, giving a total of 400 curves. Other functions : DIRIS A40 DIRIS A40 DIRIS A40 Multimeasurement Current - instantaneous:,,, In, Isystem, - maximum:,,, In - unbalance: I unb Voltages & frequency - instantaneous: U1, U2, U3, U12, U23, U31, F, Vsystem, Usystem - maximum: U1, U2, U3, U12, U23, U31, F - unbalance: U unb Powers - instantaneous: 3P, ΣP, 3Q, ΣQ, 3S, ΣS - moyen maximum: ΣP, ΣQ, ΣS - predictive: ΣP, ΣQ, ΣS Power factor - instantaneous: 3PF, ΣPF Total tangent phi - maximum: ΣPF PC CONTROL VISION software PLC Ethernet Main meter panel Temperatures (1) - Internal - external via 3 PT100 sensors Metering Active energy: +/- kwh Reactive energy: +/- kvarh Apparent energy: kvah Hours: Harmonic analysis (level 63) Total harmonic distortion - Currents: thd, thd, thd, thd In - Phase-to-neutral voltage: thd U1, thd U2, thd U3 - Phase to phase voltage: thd U12, thd U23, thd U31 Individual - Currents: H, H, H, HIn - Phase-to-neutral voltage: HU1, HU2, HU3, - Phase to phase voltage: HU12, HU23, HU31 Events (1) Alarms on all electrical values Communications (1) Analogue 0/4-20 ma Digital (Jbus/Modbus & Profibus-DP) Ethernet (modbus/tcp or Jbus/ Modbus RTU over TCP and Web server) Ethernet with gateway Jbus/Modbus RTU over TCP Currents per phase curve Inputs / Outputs (1) Pulse metering Control/command of devices Alarm report Pulse report (1) Available as an option (see the following pages). appli_386_a General Catalogue 2009-2010 SOCOMEC
Measurement units Front panel diris_824x_a_1_cat Plug-in modules DIRIS A60 diris_773_a 1 2 3 4 5 6 7 1. Backlit LCD screen. 2. Pushbutton for currents, temperatures and CT setup wiring correction. 3. Pushbutton for voltages and frequency. 4. Pushbutton for active, reactive, and apparent power and power factor. 5. Pushbutton for maximum and average current and power values. 6. Pushbutton for harmonics. 7. Pushbutton for energies and hour run meter. diris_445_a_1_cat diris_447_a_1_cat diris_775_a_1_cat diris_777_a_1_cat diris_776_a_1_cat diris_448_a_1_cat Pulse outputs 2 configurable pulse outputs (type, weight and run) on ±kwh, ±kvarh and kvah. JBUS / MODBUS communication link with JBUS / MODBUS protocol (speed up to 38400 bauds). PROFIBUS DP communication link with PROFIBUS DP protocol (speed up to 12 Mbauds). Ethernet communication Ethernet link with MODBUS/TCP or JBUS/MODBUS RTU over TCP. Ethernet communication with Gateway JBUS/MODBUS Ethernet link with MODBUS/TCP or JBUS/MODBUS RTU over TCP. Connection of 1 to 247 JBUS/MODBUS slaves. Analogue outputs A maximum of 2 modules may be connected, giving 4 analogue outputs. 2 outputs assignable to: 3I, In, 3V, 3U, F, ± ΣP, ± ΣQ, ΣS, ΣPFL/C, I sys, Vsys, Usys, Ppred, Q pred, Spred, internal T C, T C 1, T C 2, T C3 and to 17 VDC power supply. 2 inputs - 2 outputs diris_449_a_1_cat A maximum of 3 modules may be connected, giving 6 inputs. 2 outputs assignable to : - monitoring: 3I, In, 3V, 3U, F, ± ΣP, ± ΣQ, ΣS, ΣPFL/C, THD 3I, THD In, THD 3V, THD 3U, Ppred, Qpred, Spred, internal T C, T C 1, T C2, T C3 and hour meter, - remotely controlled, - timed remote control, - 2 inputs for pulses metering. SOCOMEC General Catalogue 2009-2010
- Accessories Current transformer (see page XXX) Current transformers IP65 protection Device embedded with kit for 144 x 96 mm cutout trafo_024_a_2_cat diris_569_a_1_x_cat diris_571_a_1_x_cat Terminals V1 DIRIS A40 V2 0 V - + V3 Communication module 1 0n VN R = 120 trafo_077_b_2_cat A U X link. R = 120 Ω: internal resistance for link. diris_572_a_1_x_cat Pulse output module 1 2 3 4 OUT 1 OUT 2 1-2: pulse output n 1. 3-4: pulse output n 2. diris_573_a_1_x_cat Analogue output module 5 6 7 8 + - + - 0/4-20 ma 0/4-20 ma OUT 1 OUT 2 5-6: Analogue output n 1. 7-8: Analogue output n 2. diris_574_b_1_x_cat diris_720_a_2_cat 2 inputs / 2 outputs module 9 10 11 12 OUT 1 A-Cd IN 1 OUT 2 A-Cd 13 14 15 16 - + - + IN 2 9-10: relay output n 1. 11-12: relay output n 2. 13-14: opto input n 1. 15-16: opto input n 2. diris_753_a_1_fr_cat Temperature module 19 20 21 22 23 24 25 26 27 28 29 30 DIRIS A40/A41 sonde onde 2 sonde 3 diris_718_b_1_cat - : Current inputs AUX: auxiliary power supplies Us V1 - V2 - V3 - VN: voltage inputs Ethernet module + gateway JBUS/MODBUS diris_751_a_1_fr_cat diris_752_a_1_x_cat 10 BASE T 100 BASE T RJ45 DIRIS A40/A41 Ethernet Module 10 BASE T 100 BASE T RJ45 DIRIS A40/A41 0 V - + Interface General Catalogue 2009-2010 SOCOMEC
Measurement units Characteristics Current measurement on insulated inputs (TRMS) CT primary 10 000 A CT secondary 1 or 5 Measurement range 0 11 ka Input consumption 0.1 VA Accuracy 0.2 % Sustained overload 6 A Intermittent overload 10 In for Voltage measurements (TRMS) Direct measurement between phases 50 700 VAC Direct measurement between phase 28 404 VAC and neutral VT primary 500 000 VAC VT secondary 60, 100, 110, 173, 190 VAC Frequency 50 / 60 Hz Input consumption 0.1 VA Accuracy 0.2 % Sustained overload 760 VAC Current-voltage product Limitation for 1A CT 10 000 000 Limitation for 5A CT 10 000 000 Power measurement Accuracy 0.5 % Power factor measurement Accuracy 0.5 % Frequency measurement Measurement range 45 65 Hz Accuracy 0.1 % Energy accuracy Active (according to IEC 62053-22) class 0.5 S Reactive (according to IEC 62053-23) class 2 Auxiliary supply AC voltage 110 400 VAC AC tolerance ± 10 % DC voltage 120 350 VDC DC tolerance ± 20 % Frequency 50 / 60 Hz Consumption 10 VA Case 92 + 0.8-0.0 Outputs (alarms / control) Number of relays 2... 6 250 VAC - 5 A - 1150 VA Phototransistor inputs Number 2 6 Power supply 10 30 VDC Minimum signal width 10 ms Minimum length between 2 impulses 18 ms phototransistor Outputs (pulses) Number of relays 2 100 VDC - 0.5 A - 10 VA Max. number of operations 10 8 Outputs (analogue) Number of outputs 2 4 insulated Range 0 / 4 20 ma Charging resistance 600 Ω Maximum current 30 ma Communication Link Protocol JBUS/MODBUS speed Protocol PROFIBUS speed Ethernet communication Link Speed Protocol 2 3 half duplex wires JBUS/MODBUS in RTU mode 1400 38400 bauds PROFIBUS DP 9,8 kbauds 12 Mbauds Temperature inputs PT100 Link 2 or 4 wires Range - 20 C... 150 C Accuracy +/- 1 digit Maximum length 300 cm RJ45 10 base T / 100 base T MODBUS TCP or JBUS/MODBUS RTU over TCP Operating conditions Operating temperature - 10 + 55 C C Storage temperature - 20 + 85 C C Relative humidity 95 % panel mounting Dimensions W x H x D 96 x 96 x 60 mm Case protection rating IP30 Front protection rating IP52 Display type LCD Terminal blocks type fixed or pull-out Voltage and other connection section 0.2 2,5 mm 2 Current connection section 0.5 6 mm 2 Weight 400 g 96 DIRIS A40 92 + 0.8-0.0 diris_582_c_1_x_cat 96 60 20 SOCOMEC General Catalogue 2009-2010
- Connection Recommendation: While disconnecting the DIRIS, the secondaries of each current transformer must be short-circuited. This operation can be carried out automatically from a product in the SOCOMEC catalogue, PTI: Please consult us. Low voltage balanced network for 3/4 wires with 1 CT Single phase Two phase diris_392_d_1_gb_cat N Use of 1 CT reduces by 0.5% the accuracy of the phases whose current is worked out by vector calculation. diris_395_d_1_gb_cat diris_398_c_1_x_cat Low voltage unbalanced network for DIRIS A40 3/4 wires with 3 CTs Additional information Communication via link 0 V - + LIYCY-CY ON diris_393_d_1_gb_cat N diris_396_d_1_gb_cat diris_399_b_1_x_cat 1 1 = Fus. 0.5 A gg / BS88 2 A gg / 0.5 A CC Class N diris_394_d_1_gb_cat 1 1 3 wires with 2 CTs 3 wires with 2 CTs Use of 2 CTs reduces by 0.5% the accuracy of the phase whose current is worked out by vector calculation. Connection of voltage transformer for HV networks V1 V2 V3 N diris_397_d_1_gb_cat Use of 2 CTs reduces by 0.5% the accuracy of the phase whose current is worked out by vector calculation. diris_400_g_1_gb_cat Connection of voltage transformer for HV networks 110 / 400 VAC (IEC) 120 / 350 VDC (IEC) A U X It is recommended that the auxiliary power supply be protected by the use of 500 ma gg fuses. General Catalogue 2009-2010 SOCOMEC
Measurement units References diris_824_a_1_cat Standard device Auxiliary power supply Us Accessories Reference 4825 0207 Description Reference IP65 protection 4825 0089 Panel mounting kit for a 144 x 96 mm cutout 4825 0088 Optional features Plug-in modules (1) Reference Pulse outputs 4825 0090 JBUS / MODBUS communication 4825 0092 Analogue outputs 4825 0093 2 inputs / 2 outputs 4825 0094 PROFIBUS DP communication 4825 0205 Ethernet communication 4825 0203 Ethernet communication + gateway JBUS/MODBUS 4825 0204 Temperature inputs 4825 0206 (1) Ease of integration for additional functions (maximum 4) by clutchable modules on the rear side of the device, by the user at any moment. SOCOMEC General Catalogue 2009-2010