A23 GATWICK AIRPORT LONDON ROAD PRIESTLEY WAY RUTHERFORD WAY GATWICK ROAD GATWICK STATION ROYCE RD JENNER RD LONDON ROAD A23 A23 A23 FLEMING WAY MANOR ROYAL CROMPTON WAY A2011 CRAWLEY AVENUE FARADAY ROAD NEWTON ROAD MANOR ROYAL A2011 FLEMING WAY GATWICK ROAD MANOR GATE GATWICK ROAD TINSLEY LANE A2011 THREE BRIDGES STATION M23 CRAWLEY AVENUE Brand New Sept 2012 Edition Trade Skills 4U Mitre Court Fleming Way Crawley RH10 9JY 01293 529777 info@tradeskills4u.co.uk For full terms & conditions please refer to www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 Electrical Training Courses & Qualifications Specialist Electrical Training for New Entrants and Existing Contractors.
Contents Page Contents Page Course Packages, Electrical Courses & Specialist Course Packages, Electrical Courses & Specialist Contractor Courses Call our team today on Contractor Courses Call our team today on 01293 529777 01293 529777 Course Packages City & Guilds 2377-22 20 PAT Testing Course Apprenticeship & NVQ Courses Metallic Conduit Installation 40 Domestic Electrical Installer - Bronze 1-2 Domestic Electrical Installer - Green 3-4 City & Guilds 2377-32 & 2377-22 21 PAT Testing Course EAL Apprenticeship & NVQ 29 City & Guilds 2330 Level 2 & 3 30 Trunking, Conduit & Wiring Systems 41 CCTV Installation 42 Domestic Electrical Installer - Silver 5-6 NAPIT 17024 Electrical Installer Package 7-8 Renewable Energy Course Guide 9-10 Electrical Courses City & Guilds 2377 3 Day 22 PAT Testing Course Completion of Inspection & Testing 23 Documentation City & Guilds 2394 Initial 24 Verification Course City & Guilds 2357 Course / NVQ 31 Diploma City & Guilds 2365 Level 2 & 3 32 Young Persons Electrical 33-34 Taster Week Data Cabling & Structured Wiring Systems 43 Renewable Energy Awareness 44 Door Entry Systems 45 External Wiring 46 Domestic Installation Workshop - MOD 1 11-12 Principles of Electro-Technology - MOD 2 13-14 City & Guilds 2394 / 2395 25 Course Package Specialist Contractor Courses Three Phase Installation 35 Business Start Up 47 Central Heating Controls 48 Part P Domestic Electrical Installers Course 15-16 City & Guilds 2395 Inspection 26 & Testing Course Electrical at Work Regulations Course 36 Booking Process & Info 49 City & Guilds 2393 Part P 17 City & Guilds 2382-10 17th Edition Course 18 City & Guilds 2396 Electrical 27 Design Course Emergency Lighting 37 Fire Alarms 38 Solar PV Tools 4U 50 City & Guilds 2392-10 Inspection 19 & Testing Course NAPIT Blueflame ISO 17024 Course 28 Domestic Burglar Alarms 39 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777
Domestic Electrical Installer - Bronze Course code TS4U -17 This 17 day BRONZE course includes all the training you ll need to be a fully qualified Domestic Electrical Installer. With this set of qualifications and skills you can be confident you will be competently equipped to pass your assessments and register with a domestic electrical installer scheme provider and begin undertaking work for your customers. BRONZE 17 Your training & friendly staff exceeds every expectation, I would highly recommend you to anyone! What s included? This course package includes 4 courses over 17 days: This 4 course package takes the hassle out of booking and co-ordinating the courses you need to become a fully qualified Domestic Electrical Installer; it also saves time and money! 5 Day Domestic Installation Workshop: TS4U-MOD1 This 5 Day Practical Installation Electrical Course will enable you to install everything from the consumer unit to the socket and everything in between, for those with little or no electrical experience. Our most popular course! 4 Day Inspection & Testing City & Guilds 2392-10: TS4U-92 This course is a mix of practical and theory aimed at practicing electrical installers who have not carried out Inspection and Testing before. It is also suitable for those with limited experience of Inspection and Testing of electrical installations, such as those Domestic Installers new to the industry, or those working in allied trades. I.e. Plumbers, kitchen fitters, landscape gardeners. 5 Day Part P Domestic Installers VRQ Qualification: TS4U-PP This course gives you the knowledge, skills and qualifications to enable you to competently install your domestic electrical work, compliant with Part P of the Building Regulations, this course concludes with an online exam to gain your City & Guilds certificate. 3 Day City & Guilds 2382-12 (17th Edition): TS4U-82 Every practicing electrician must have their wiring regs certificate (17th Edition). This classroom based short course includes an online test which enables you to obtain the current wiring regs. Once passed, you will have certification in the current regulations. Is this course right for me? This course package is suitable for anyone who wants to become a Domestic Electrical Installer and has little or no electrical installation experience. If you DO NOT wish the courses to run consecutively then please book by calling us 1 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 2 on 01293 529777 rather than booking online.
Domestic Electrical Solar PV Installer - Green Course Course code TS4U-22 This 22 day GREEN course allows a new entrant into the electrical industry to become fully qualified as a solar PV installer. With no previous experience this package contains the 5 specialist courses that will enable you to become a Domestic Installer and solar PV installer. GREEN 22 Fantastic facility, fantastic administration and instruction. What s included? This course package includes these 5 courses over the 22 days: This 5 course package takes the hassle out of booking and co-ordinating the courses you need to become a domestic electrical Installer, saving time and money. 5 Day Domestic Installation Workshop: TS4U-MOD1 This 5 day practical installation electrical course will enable you to install everything from the consumer unit to the socket and everything in between. It is designed for those with little or no electrical experience; our most popular course. 4 Day Inspection and Testing City & Guilds 2392-10: TS4U-92 This course is a mix of practical and theory aimed at practicing electrical installers who have not carried out Inspection and Testing before. It is also suitable for those with limited experience of Inspection and Testing of electrical installations, such as those domestic installers new to the industry, or those working in allied trades I.e. Plumbers, kitchen fitters and landscape gardeners. 5 Days Part P Domestic Installers Course: TS4U-PP This course gives you the knowledge, skills and qualifications to enable you to competently install your own domestic electrical work, compliant with Part P of Building Regulations. This course concludes with an online exam to gain your City & Guilds certificate. 3 Day City & Guilds 2382-12 (17th Edition): TS4U-82 Every practicing electrician must have their wiring regs certificate (currently the 17th Edition). This short course is classroom based with an online multiple choice exam. 5 Day BPEC Solar PV (Photovoltaic) Course: TS4U-BP5 Check out the course details contained in our Renewable Energy brochure for information on this Solar PV installation course. If you book online, you will be booking the courses to run consecutively. However, you need not do the courses 3 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 4 in one continuous 22 day period if you do not wish to.
Domestic Electrical Installer - Silver Course code TS4U -25 This SILVER course package is the TS4U-17 and contains 7 courses. It is designed for new entrants looking to become domestic installers who wish to install & carry out PAT Testing services in commercial premises. This package also includes a renewable energy awareness course for those looking to get into this fast-emerging industry. SILVER 25 Your training & friendly staff exceeds every expectation, I would highly recommend you to anyone! What s included? This course package includes 7 courses over 25 days: 5 Day Domestic Installation Workshop: TS4U-MOD1 This 5 Day Practical Installation Electrical Course will enable you to install everything from the consumer unit to the socket and everything in between, for those with little or no electrical experience. 5 Day Principles of Electro-Technology: TS4U-MOD2 This science module gives you the in-depth knowledge to fully understand how and why electrical systems work, which is essential when considering progression onto PAT Testing and Inspection and Testing City and Guilds 2391-10 and other short courses. 4 Day City & Guilds 2392-10 Inspection & Testing: TS4U-92 This course is a mix of practical and theory aimed at practicing electrical installers who have not carried out Inspection and Testing before. It is also suitable for those with limited experience of Inspection and Testing of electrical installations, such as those domestic installers new to the industry, or those working in allied trades. 5 Day Part P Domestic Installers VRQ Qualification: TS4U-PP This course gives you the knowledge, skills and qualifications to enable you to competently install your domestic electrical work, compliant with Part P of the Building Regulations, this course concludes with an online exam to gain your City & Guilds certificate. 3 Day City & Guilds 2382-12 (17th Edition): TS4U-82 Every practicing electrician must have their wiring regs certificate. This classroom based short course includes an online test which enables you to obtain the current wiring regs. Once passed, you will have certification in the current regulations. 2 Day City & Guilds 2377-32 & 2377-22 PAT Testing Course: TS4U-77 These qualifications enable you to manage PAT testing and undertake PAT Testing. Our workshops include both theory and practical elements; we cover everything necessary to successfully achieve your qualifications and give you the skills to undertake PAT Testing tasks. 1 Day Renewable Energies Awareness Course: TS4U-RE Interested in the growing renewable energies sector? This course gives you an awareness of the Renewable Technologies, what they are, what the technology involves, what practically is required, the science, the equipment, the whole topic discussed and demonstrated. If you DO NOT wish the courses to run consecutively then please book by calling us 5 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 6 on 01293 529777 rather than booking online.
NAPIT 17024 Electrical Installer Package Course code TS4U -27 This course package is new for 2012. It is designed to give you all the skills to become a competent electrical installer capable of carrying out both domestic and small commercial installations. The course is similar to our bronze package but also covers Electro Technical science, 3 phase training, periodic Inspection & Testing and is also completed with a Blueflame 17024 assessment designed specifically to allow you to register with NAPIT on their full scope competent persons scheme. This will enable you to carry out periodic inspection and testing as well as work on larger 3 phase systems. What s included? Our Blueflame Gold Course package is designed to provide you with the specific training required to join NAPIT. We are one of the few training companies in the UK to offer the Blue Flame assessment as part of our on site training. This course package provides you with all the required qualifications for domestic installation plus more advanced courses such as the MOD2 and the 5 Day NAPIT 17024 Blueflame course covering three phase and Periodic Inspection & Testing. NAPIT 27 This course package includes 6 courses: Principles of Electro Technology: TS4U- MOD2 This science module gives you the in-depth knowledge to fully understand how and why electrical systems works, which is essential when considering progression onto PAT testing and Inspection and testing City and Guilds 2391-10 and other short courses. Domestic Installation Workshop: TS4U- MOD1 This 5 Day Practical Installation Electrical Course will enable you to install everything from the consumer unit to the socket and everything in between, for those with little or no electrical experience. Our most popular course! City & Guilds 2392-10 Testing & Inspection: TS4U-92 This entry level course is a mix of practical and theory aimed at practicing electrical installers who have not carried out inspection and testing. Professional set up, polite and patient tutors with real experience, what more could you ask for...? It is also suitable for those with limited experience of inspection and testing of electrical installations, such as those domestic installers new to the industry, or those working in allied trades. ie, Plumbers, kitchen fitters, landscape gardeners. Part P Domestic Installers Course: TS4U-PP This course gives you the knowledge, skills and qualifications to enable you to competently install your domestic electrical work, compliant with Part P of the Building Regulations. City & Guilds 2382-12 (17th Edition): TS4U-82 Every practicing electrician must have their wiring regs certificate (17th Edition). This short course is classroom based, with an online test and qualifies you to obtain your 17th Edition wiring regs NAPIT 17024 Course & Blueflame Assessment This 4 day course plus an assessment day is designed to recap on the key elements of all the previous courses but focussed mainly on periodic inspection & testing before undertaking the Blueflame assessment. At the end of the 4th day you will take an initial online open book multiple choice exam. You will be issued with an immediate result and as long as you pass you will then be able to complete a practical assessment the following day or at a later date. By completing this final course you can then register with NAPIT on their full scope Competent Persons Scheme. This 6 course package takes the hassle out of booking and co-ordinating the courses you need to become an electrical installer. Brand New for 2012 If you DO NOT wish the courses to run consecutively then please book by calling us 7 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 8 on 01293 529777 rather than booking online.
Incredible teaching, can t wait to come back and do more! Renewable Energy Courses See our Renewable Energy brochure for more details We have a specialist Renewable Energy training centre which has purpose built facilities enabling candidates to train the in newest technologies within the UK s fastest growing market. Please consult our Renewable Energy brochure or contact us on 01293 529777 for more information. We offer: Renewable Energies Awareness Course BPEC Solar PV 5 Days (with health & safety module) BPEC Solar PV 4 Days (without health & safety) BPEC G59 small PV installation Course Solar PV Roofers Course Solar PV Roofers Course with Health & Safety module NICEIC Health & Safety Course City & Guilds 2399-01 Renewable Energy Foundation City & Guilds 2399-11 Solar PV Installation City & Guilds 2399-12 Solar PV Maintenance Solar PV Sales Consultant Solar Hot Water Systems (Solar Thermal) NICEIC Water Regs NICEIC Unvented Regs Rainwater Harvesting MCS Quality Management Systems 9 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 10
Domestic Installation Workshop Course code TS4U-MOD1 Practical installation course enabling you to install everything from the consumer unit to the socket and everything in between, for those with little or no electrical experience. Our most popular course and is the first element of our TS4U-17 package! 5 Clear, concise and always relevant - absolutely first class This is a practical training course that provides the foundation knowledge prior to undertaking the Part P Domestic Electrical Installers VRQ: TS4U-PP qualification. Over the years that we have been providing electrical training we ve found that many people who enrol on our Part P and 17th Edition courses lack the basic electrical installation knowledge that will ensure they get the most from these intensive courses. With that in mind, we ve created this special 5 Day Domestic Installation course to take you from having little or no electrical experience through to having the essential grounding and knowledge you ll need to build an electrical career - and to pass the assessments and tests in later courses. Covering all the practical workshop skills and classroom theory you need, this is the best possible way of bringing you up to scratch in a friendly and supportive environment - and it opens the doors to a new career. 5 Day Domestic Electrical Installation Workshop Content Learn about... Ring main circuits (sockets) Basic lighting circuits 1 way, 2 way, intermediate lighting circuits Radial power circuits (cooker points etc) Earthing and bonding procedures Zoning and selection of equipment Selecting cable sizes and calculating load demands Introduction to electrical regulations Health & safety Safe isolation procedures Identifying three phase systems Electrical calculations Candidates will be awarded a TS4U certificate of 11 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 12
Principles of Electro-Technology Course code TS4U-MOD2 This science workshop gives you the foundation knowledge to fully understand how and why electrical systems work, which is essential when considering progression onto City and Guilds 2391-10 Inspection and Testing and other contractor short courses. 5 The instructor was excellent put things across well and was always patient with me. Knowledge of electrical science is essential when progressing onto solar PV, 2391 and other contractors courses where a deeper understanding is required. Fundamentals of electricity: Electron theory including atomic elements and free electrons Charge and attraction Coulomb s Law Conductors, Insulators and Semiconductors Current Voltage Resistance Electrical symbols and mathematical prefixes Simple electrical circuit theory: Ohm s Law Using digital multimeters to measure resistance, voltage and current Practical workshop including the building a simple electrical circuits calculating the expected value of current and measuring the actual resistance, voltage and current DC series circuits, this follows the theory then practical route DC parallel circuits, again this follows the theory then practical route reinforcing the use of previously learnt techniques DC series parallel circuits. Power, solving power problems using power formulae Magnetism Electromagnetism and electromagnets AC Theory Introduction to AC, sine waves, single and 3 phase supplies AC generation Frequency Voltage and current, peak, instantaneous and RMS values Relationship between line and phase voltage in a 3 phase system Transformer theory, calculation and practical Capacitance theory, calculation and practical Inductance theory, calculation and practical Impedance theory, and calculation of circuit impedance Candidates will be awarded a TS4U certificate of 13 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 14
Part P Domestic Electrical Installers Course Course code TS4U-PP To undertake Domestic Electrical Installation work competently and compliant to Part P building regs you will need knowledge and skills that this course will give you, together with the relevant qualification. 5 I now have very good skills and look forward to putting them into practice. Our 5 day VRQ Part P Courses will bring you right up to the required safety & legal standards, enabling you to competently install your domestic electrical work, compliant with Building Regulations Part P. After gaining your City & Guilds VRQ in the Building Regulations for electrical installations in dwellings on the Part P course, you are able to register to become a competent Domestic Electrical Installer, with the ability to install, inspect, test and certify your work. To register with a Competent Person Self-Certification Scheme such as NICEIC, NAPIT or ELECSA, you will be expected to be competent and have had training in Part P building regs, with these skills and qualifications and subsequent registration you can self-certify your installation work and provide your customers with a Part P compliant certificate. Stunning Our pass rates are the highest in the industry, our training centre is the best-equipped and our trainers are supportive and helpful. So what are you waiting for? Part P Electrical Course Content Applicable Building Regulations Electrical Safety legislation, regulations standards and terminology Pre work survey/inspection Safe isolation procedures Identification of unsafe electrical situations Earthing and bonding requirements Electrical test procedures Cable and component selection Installation and replacement of electrical components Checking the correct and safe operation of installed electrical components Recording of electrical test results and completion of certification Installing and/or rerouting cables Special locations New circuit requirements Installing domestic lighting circuits Maintaining domestic electrical installations Basic understanding of 3 phase supplies This course concludes with an online test to obtain your City & Guilds qualification. 15 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 16
City & Guilds 2393 Part P 17th Edition Wiring Regs City & Guilds 2382-12 Course code TS4U-2393 This Level 3 in the Building Regulations for Electrical Installations in Dwellings 2393-10 is for qualified and experienced electricians. 1 DAY Course code TS4U-82 Get qualified for the latest IEE wiring regulations with our 3 day City and Guilds 2382-12, 17th Edition Training Course. 3 Why take this course? The City & Guilds 2393 Part P will enable you to register with a governing body and work as a Domestic Part P Installer. This 1 day course is aimed to provide practicing electricians, already operating in the domestic environment, to upgrade their existing knowledge to incorporate an understanding of how electrical installations in dwellings must comply with all relevant Building Regulations. This qualification does not cater for those that need to learn how to meet the technical requirements when carrying out such work; therefore we are only able to take on qualified electricians with the appropriate knowledge and skills on this 1 day course. Entry Requirements: This course is for qualified and experienced electricians only who want to upgrade their knowledge and qualifications to encompass the Part P building regulations, and be able to register with a governing body and work as a Domestic Part P installer. City & Guilds 2393 Part P Course content: In just 1 day we are able to bring existing electricians up to date with relevant building regulations and prepare you for a multiple choice exam. Very friendly service all round. I look forward to my next course at the end of the month - Niall Mimnagh, 2393. Who is it for? The 17th Edition training course is primarily aimed at practicing electricians with relevant experience, Domestic Electrical Installers and other allied professionals e.g. electrical engineers, contracts managers and other related trades needing to update and enhance their understanding of IEE Wiring Regulations. It may also be suitable for anyone requiring an understanding of BS 7671(17th Edition regs), although prior knowledge in basic electrical installation is useful. It is intended to ensure that on completion individuals are conversant with the format, content and the application of the Requirements for Electrical Installations BS 7671: 2008 (17th edition). Approach to the Course and Assessment The course consists of classroom instruction and culminates in a multiple choice online test covering the underpinning knowledge relating to the content and application of BS 7671 17th Edition. The Assessment for this qualification consists of one On-line test which lasts 2 hours. Course Content There are eight units making up the course relating to Parts 1-7 and the Appendices of BS 7671:2008: Scope, object and fundamental principles. Scope, object and fundamental principles Definitions Assessment of general characteristics Protection for safety Selection and erection of equipment Inspection and Testing Special installations or locations Appendices Entry Requirements There are no formal entry requirements for candidates undertaking this qualification. However, we must ensure that candidates have the potential and opportunity to successfully gain the qualification. It is expected that candidates will have basic knowledge of electrical science. 17 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 18
Initial Inspection & Testing City & Guilds 2392-10 City & Guilds 2377-22 PAT Testing Course Course code TS4U-92 Course code TS4U-22 This Initial Inspection & Testing course has been designed and developed by the electrical industry and City & Guilds specifically for the Domestic Electrical Installer or those many existing contractors new or unfamiliar to inspection and testing. It s a must have if your goal is to register under the Domestic Installer scheme. 4 Given that every commercial electrical appliance requires PAT testing, this PAT testing course is a very useful qualification and addition to the skillset of any practicing electrical professional. Undergoing PAT testing training will prove invaluable. 2 Why take this course? Testing and Inspection is often a difficult subject for even the most experienced of electricians. This qualification, not only demystifies testing, it also provides you with a qualification and certificate to show you are competent to undertake the work. It s a very essential skill and qualification to have for anyone undertaking electrical installations. Course Content Preparation for initial Inspection and Testing Electrical Inspection & Testing Training in use of test equipment Safe isolation procedures and equipment Inspection & Testing documentation Continuity of protective conductors Continuity of ring final circuit conductors Insulation resistance Protection by SELV Polarity Earth electrode resistance Earth fault loop impedance RCD testing Prospective fault current Verification of volt drop Entry Requirements There are no formal entry requirements for this qualification, however we must ensure that all our candidates have the potential and opportunity to successfully gain this qualification. It would be expected that candidates have a basic knowledge and understanding of electrical science principles and experience of electrical installation either within the electrical industry or allied trade.this qualification is not approved for use by candidates under the age of 18. City & Guilds will not accept any registrations for candidates under this age. Required Books: 1.On-Site Guide (BS 7671:2008 Wiring Regulations, incorporating Amendment No 1:2011) IET 978-1-84919-287-3 Recommended Books: 1.Guidance Note 3: Inspection and Testing, 5th Edition IET 978-0-86341-857-0 2. Requirements for Electrical Installations: IET Wiring Regulations 17th Edition (BS 7671:2008 incorporating amendment no 1: 2011) IET 978-1-84919-269-9 The City and Guilds 2377-22 will provide you will the skills to inspect and test electrical equipment. We offer 2 other PAT Testing Courses: 2377-22 & 2377-32 PAT Testing course 3 Day PAT Testing Course (For those with no electrical experience Why take this course? PAT testing is one of our most popular courses. It is a great way of streaming another source of revenue and will enable you to offer another service to your customers. Is this PAT course right for me? PAT testing is a skill that can be learned by almost anyone such as office maintenance staff or landlords. Some basic electrical knowledge is useful but not essential. In a commercial environment, regulations insist that every item of electrical equipment is tested and certified as being safe to use. For electrical contractors this can be seen as a potentially lucrative new service to add - and one that is required by industry at all levels. City & Guilds 2377-22 Course Content: This course enables you to undertake PAT testing training and manage the testing process. For this course option, you will take the City & Guilds 2377-22 Operators Registration and Examination. If you also want to take the City & Guilds 2377-32 Management Qualification you should book this PAT course. Every item of electrical equipment in a commercial environment is required to be PAT tested, that is it has been tested as being safe to use and has been marked safe, whether it be a kettle, toaster or computer. This two day practical workshops cover everything necessary to successfully achieve the City and Guilds certification. The course includes both a theory element and practical elements. We take you through the practical disciplines and formal recording processes, as well as preparing you for the online City and Guilds 2377 test. The City & Guilds 2377-22 PAT Testing Exam The PAT Testing exam consists of 30 questions with a time limit of 1 hour. This exam will be conducted at our centre in a comfortable environment following your course 19 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 20
City & Guilds 2377-32 & 2377-22 City & Guilds 2377 3 Day PAT Testing Course Course code TS4U-77 Course code TS4U-773 PAT testing is one of our most popular courses. It is a great way of streaming another source of revenue and will enable you to offer another service to your customers. Two qualifications, taken together to give you the best possible return on your time and investment. Most candidates use the advantage of taking the two together. 2 If you have decided to study PAT Testing but do not have an electrical background, taking our 3 day PAT testing course will increase your overall understanding of how electrics works and is installed. This in turn ensures you have the best chance of success. 6 This 2 day PAT testing training course covers both the 2377-22 and 2377-32 City and Guilds qualifications. These are the latest and most up to date qualifcations available from City & Guilds in PAT Testing. We now offer the most up to date PAT testing courses. We have upgraded all of our courses to the new level 3 PAT testing courses 2377-22 and 2377-32. Is this course right for me? PAT testing is a skill that can be learned by almost anyone such as office maintenance staff or landlords. Some basic electrical knowledge is useful but not essential. In a commercial environment, regulations insist that every item of electrical equipment is tested and certified as being safe to use. For electrical contractors this can be seen as a potentially lucrative new service to add - and one that is required by industry at all levels. City & Guilds 2377-22 & 2377-32 PAT testing Course Content: These two qualifications taken together give you the best possible return on your time and investment. Most candidates use the advantage of taking the two together. 1. City and Guilds 2377-32 Management of electrical equipment maintenance. 2. City and Guilds 2377-22 Inspection and testing of electrical equipment. These two qualifications enable you to manage PAT testing and undertake PAT testing. This course option includes both the City & Guilds 2377-22 Operators Registration and Examination and the City & Guilds 2377-32 Management Qualification. If you are looking to only undertake only the Operators Registration & Examination 2377-22 you should click/book here. We take you through the practical disciplines and formal recording processes, as well as preparing you for the online City and Guilds 2377 tests. Exams The 2377-22 PAT Testing exam consists of 30 questions with a time limit of 1 hour. This exam will be conducted at our centre in a comfortable environment. Exam 2377-32 PAT Testing exam consists of 45 questions with a time limit of 90 minutes. It follows completion of the 2377-22 exam. Text books required: The reference book Codes of Practice for In- Service Inspection and Testing of Electrical Equipment 3rd Edition ISBN Number 978-0863418334 is required for this course. This book is available from www.theiet.org or good electrical suppliers, copies at also available for sale in our centre. Why take this 2377 3 day course? This 3 Day PAT Testing course is designed specifically for those with little or no electrical experience. PAT testing courses are open to all from office managers to maintenance people. However if you are completely new to electrics and feel you may benefit from more time to understand PAT Testing then this is the course for you. By booking this 3 Day course you will take both the 2377-22 and 2377-32 PAT testing exams. If for any reason you do not wish to book both exams please contact us to book this course rather than booking online. For more information on both qualifications please see our 2 day 2377-22 / 32 course. Why take this PAT Testing course? Trade Skills 4U lead the way in electrical training in the UK. Although PAT testing courses are open to all, we have recognised and developed a three day course including an initial days training specifically designed to give you a grounding in the basics of electrics in relation to the PAT testing qualification. This extra day is offered at an exceptionally low cost compared to the rest of the course. By taking this 3 day course you will have the greatest chance of success on the PAT testing exams. You will also learn both the skills to carry out PAT Testing as well as the management qualification. Once qualified you will be able to offer PAT Testing services to a variety of customers. This can be a very lucrative service. We take you through the practical disciplines and formal recording processes, as well as preparing you for the online City and Guilds 2377 exams. Exams The 2377-22 PAT Testing exam consists of 50 questions with a time limit of 1 hour 45 minutes. This exam will be conducted at our centre in a comfortable environment. Exam 2377-32 PAT Testing exam consists of 40 questions with a time limit of 1 hour 20 minutes. It follows completion of the 2377-22 exam. Brand New for 2012 21 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 22
Completion of Inspection & Testing Documentation City & Guilds 2394 Initial Verification Course Course code TS4U-cert Course code TS4U-94 Not sure which certificates to use? Not sure whether or not the paperwork is completed correctly? Ever wondered what all the entries on the Schedule of Inspection means? 1 DAY Not sure which certificates to use? Not sure whether or not the paperwork is completed correctly? Ever wondered what all the entries on the Schedule of Inspection means? 4 This short course provides the necessary knowledge and skills to enable anyone responsible for providing certification for electrical installation work, to select and correctly complete the appropriate documentation. This course is suitable for those carrying out Inspection and Testing, overseeing electrical work or anyone who requires knowledge of what the certificate entries mean. This course consists of classroom instruction interjected with practical scenario based exercises to reinforce and assess learning. Course content: Why certification is required Types of inspection and testing Which documentation to use and when Completion of the electrical installation certificate Completion of the minor electrical installation work certificate Completion of the Periodic Inspection report for an electrical installation Completion of the Schedule of Inspections Completion of the Schedule of Test Results Text books required: BS7671:2008 Requirements for Electrical Installations (ISBN: 978 0 863418440) On-Site Guide (BS 7671:2008 Wiring Regulations, 17th Edition) (ISBN: 978-086341-854-9) Why take this course? Your installation can be superb, but if the paperwork s incorrect it leaves you open to the accusation the installation was not compliant to regulations, so the paperwork is just as important and you re not alone, many contractors are weak in this area and given the many differing versions, is it a wonder? s and report books are confusing and certainly wouldn t win any plain writing awards, but don t worry, we have the solution, this course will help you do it right, we re experts at paperwork! The 2394 qualification is very similar to the City & Guilds 2392-10 with the addition of 3 phase. The 2394 includes both theory and hands on training in our state of the art centre. This qualification helps you to develop the knowledge and practical skills needed to professionally inspect and test electrical installations. Entry Requirements / Who s it for? This qualification is ideal for contractors already working in industry but needing to learn all about inspection & testing, initial verification and certification. All candidates should have basic knowledge of electrical science and experience of electrical installation. This qualification is suitable for: Practicing electricians looking to enhance their current knowledge and gain the latest qualification. The qualification is also suitable for those with limited experience of initial inspection and testing but experience of electrical installation. As such it is also suitable for candidates entering the industry from other engineering or allied trades. This is a level 3 qualification, however for candidates with limited electrical experience you may want to consider our City & Guilds 2392-10 Inspection & Testing course. Why take this 2394 Initial Verification & Certification course? Like the current 2391 qualification, the 2394 course will be highly regarded by many employers in the industry and will be an excellent addition to any electricians CV. It allows you to verify, test and inspect new installations. Unlike the 2392, this is a level 3 qualification that forms part of the QCF framework. As a level 3 qualification the 2394 is a more advanced course, however our specialist electrical instructors will help you demystify and simplify the qualification providing you with the latest certificate to demonstrate your competency. One other major difference between this course and the 2392 is that is covers inspection and testing of 3 phase installations. Like the 2392 before it, this is an essential skill for any electrical installer. Brand New for 2012 Traceability 23 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 24
City & Guilds 2394 / 2395 Course Package City & Guilds 2395 Inspection & Testing Course Course Code TS4U - 9495 These two new testing and inspection qualifications (recommended to be taken together) replace and improve on the former 2391 that was previously available to electricians but has since been withdrawn. 6 Course Code TS4U - 95 This qualification is designed for those experienced or recently trained in electrical installation, who want to enter the profitable area of periodic Inspection and Testing. This 2395 course teaches candidates to inspect and test existing installations. 4 2394 is a level 3 qualification to train you both in the practical and theory covering initial verification and certification of installations, including 3 phase. 2395 is a level 3 qualification to train you the in Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations. Entry Requirements Entry to both these qualifications require you to have experience and knowledge of inspection and testing. It is useful for you to have taken the entry level City & Guilds 2392 Level 2, if you re new to testing and inspection. Not mandatory, but certainly useful. The 2394 / 2395 course package is intended for people working in the electrical industry who have existing knowledge of inspection and testing but who need to complete the formal qualifications and refresh and/ or upgrade their skills in initial verification, certification, periodic inspection & testing of electrical installations. Note! For the 2395 element you need to know your 17th edition wiring regs. Worth knowing. The 2394 & 2395 qualifications are currently required in order to gain your JIB grading as an approved electrician, so save time and money with our combined course. Options? - If you do not meet the above requirements you may wish to consider our City & Guilds 2392 course and/or 17th Edition course. City & Guilds 2394 / 2395 Course Content: The first four days of the course will be spent covering the practical and theory skills of initial verification and certification whilst the last 2 days will be concentrated on principles, practices and legislation of periodic inspection & testing. Exams, Qualifications & Registration Dates: The dates for written exams are set nationally by City & Guilds. You will be assessed in 3 ways; 1 online multiple choice exam, 2 written papers and also 2 practical assessments. The dates for written exams are set nationally by City & Guilds. Brand New for 2012 Entry Requirements / Who s it for? This 2395 qualification is ideal for existing contractors who already have knowledge of inspection and testing. Ideally you will have previous experience and/or already completed one of the following courses: City & Guilds 2392 Inspection & Testing Course City & Guilds 2394 Initial Verification & Certification Course If you have existing knowledge of inspection and testing and are unsure if you are eligible for this course, speak with our course advisors on 01293 529777. Why take this 2395 inspection and testing course? This is the latest most up to date inspection and testing course from City & Guilds. Following this new 2395 course you will be able to inspect and test a range of installations in both domestic and commercial settings and most importantly this will allow you test and inspect existing installations carried out by other domestic installers or electricians. Even for an experienced electrician Inspection and Testing can be a difficult subject, however on the City and Guilds 2395 Inspection and testing course we will ensure the subject is demystified giving you the best chance of gaining the latest qualification to demonstrate your competency. As a specialist electrical training company we have many years solid experience in delivering a range of City & Guilds electrical courses City & Guilds 2395 Course Content: This 2395 course will teach you the principles, practices and legislation for Periodic Inspection and Testing and reporting of electrical installations in accordance with statutory and non-statutory regulations and requirements. Its content covers skills and background knowledge for the periodic Inspection and Testing and reporting of electrical installations. Brand New for 2012 25 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 26
City & Guilds 2396 Electrical Design Course NAPIT Blueflame ISO 17024 Course Course code TS4U-96 This 2396 course will provide you with the knowledge to design and erect an electrical installation, taking account of environmental influences, routing and suitability for purpose. This is a brand new level 4 qualification. 6 Course Code TS4U - NAPBLUE This course is intended as an intensive refresher for existing electrical installers covering periodic inspection and testing and three phase skills in preparation for a Blueflame 17024 assessment. Completion of the assessment will then enable candidates to register with NAPIT on their full scope competent person s scheme. 6 Why take this 2396 Electrical Design course? This 6 day course will provide you with all the necessary information and knowledge to design and erect an electrical installation, with the focus being on cable sizing and management, taking account of environmental influences, routing and suitability for purpose. This is the most up to date and advanced electrical design course available. This Level 4 2396 qualification will replace the 2391-20 course which is currently being phased out. The 2396 course is intended for experienced personnel working in the electrical industry. 2396 Course Entry Requirements Candidates should be experienced in electrical installation and ideally hold one of the following inspection & testing qualifications: City & Guilds 2391-10 Inspection & Testing Course or City & Guilds 2394 Initial Verification & Certification Course or City & Guilds 2395 Period Inspection & Testing Course It is also strongly recommended that candidates have achieved the City & Guilds 2382 or similar qualifications which demonstrate knowledge and understanding of the 17th Edition.This course has an age restriction of 18 years and older. City & Guilds 2396 Course Content The course is theory based and consists of classroom based teaching run two days per week over a 3 week period. During this time you will also be working on a set assignment which you will review with your tutor during you time with Trade Skills 4U. The 2396 course teaches you the invaluable skills to design and scope electrical installations. single and poly phase electrical installations. You will need to prove competence in these subjects via a set assignment and a written exam. Course Dates: This course lasts 6 Days which take form in 3 x 2 day sessions. Please make sure you are available for all the dates below before you book this course. Please speak to an advisor if you are unsure; 01293 529777. Brand New for 2012 Is this course right for me? This course is ideal for experienced electrical installers who already have knowledge of: 17th edition wiring regulations (i.e. Passed your 2382 Qualification) Inspection & Testing (i.e. Passed your 2392 or 2394 Qualification) The Electricity at Work Regs 1989 You do not necessarily need to have the qualifications in these subjects as long as you have solid knowledge and experience. It is designed for both electricians and electrical inspectors looking to complete the Blueflame assessment and register with NAPIT. NAPIT ISO 17024 Course Content This course covers both theory and practical teaching. As such it is taught in our specially designed dual purpose classrooms allowing you to practice what you learn as you go. The course does not teach you to inspect and test but does build on your current knowledge of Initial Verification with a focus on periodic Inspection and Testing. At the end of the course you should be fully competent to carry out all aspects of Inspection and Testing as detailed in BS7671. The main focus on the course is on Inspection and Testing with key areas covered as follows: Safety and Regulations Inspection Procedures and Practises Safe Isolation Initial Verification of System Design Instrumentation Testing Sequence Certification Blueflame Exams and Assessments You will take a multiple choice open book exam on the fourth day of the course. As long as you have passed the multiple choice exam you can progress to the practical assessment which can be booked in the next day or at a later date. The practical assessment takes place over a whole day. You will perform a number of tasks on our specially designed assessment rigs throughout the day. Your practical assessment will be booked in once you have passed the theory part of the course. Brand New for 2012 27 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 28
EAL Electrician Apprenticeship & NVQ City & Guilds 2330 Level 2 & 3 Course Code TS4U - EALNVQ This EAL electrician s Diploma course covers training centre based teaching for 16 weeks with options for the NVQ and AM2 Assessments. This course is identical to our apprenticeship course but is for adults who are not eligible for funding or simply want to pay for their training privately. Course Code TS4U - 233023 The City & Guilds Level 2 & 3 courses are due to expire in December 2012, as such we will not longer be offering them. However if you have completed your Level 2 2330 qualification and are looking to progress, we can help you map over to the new qualification - City & Guilds 2357. Why take this EAL Electricians Course? Trade Skills 4U specialise in adult learning. We can deliver the knowledge units training in as little as 16 weeks, meaning you can reduce the time it takes to get working and earning whilst working under the supervision of an experienced electrician. As a fully qualified electrician you will be able to work in both commercial and domestic settings increasing the variety of work you can take on and your potential sources of income. This Electrician s Course is one of the most recognised qualification of its kind in the UK. The government, ECA, JIB, JTL and Summit skills all recognise it as a robust route to becoming a fully qualified electrician. This qualification is the equivalent to the current City & Guilds 2357 course. The course will take you right through from the basics to the advanced. For mature students previous experience will be taken into consideration, however it is important to note that some of the maths on the course can be quite in depth so it is important that you can show good ability in this area. By funding this course privately it is possible to complete the knowledge units first and then seek employment once these have been completed and then complete your NVQ and AM2 assessments. For many students this makes their skills more appealing to potential employers. If you are unsure of your suitability please contact us to find out if you are suitable and arrange an assessment on 01293 529777. Below is a quick guide to transferring from the City & Guilds 2330 to the new 2357 The City & Guilds 2357 NVQ qualification essentially wraps together a number of older qualifications (including the City & Guilds 2330 Level 2 & Level 3) into 1 package. It is relatively simple and easy for those who already have a 2330 qualification to switch to the 2357 framework. Because the courses are modular we are able to book candidates onto individual elements of the course. Should you have a specific need or simply need some advice please call 01293 529777 and we can provide advice on where and how you could pick up your training. Upgrading from City & Guilds 2330 Level 2 Upgrading from City & Guilds 2330 Level 3 For those who have completed 2330-07 Level 3 Technical certificate they will need to complete one additional environmental knowledge unit is needed: 2357-302 (ELTK02) Completing the full NVQ If you want to achieve the full NVQ qualification you will also need to complete the following work placed assessments 2357-311 2357-12 2357-13 2357-15 This electricians course is taught in our state of the art training centre by our experienced and specialist electrical teachers. Entry Requirements / Who s it for? This EAL electricians course is open to all. Ideally you will already have 4 GCSE s including Maths and English. These should be grades A-C. However if you don t there are other methods of assessment you can take. Course Dates and Timings You will receive 16 weeks of on site training at Trade Skills 4U. This can be taken 2 weeks on 2 weeks off over 32 weeks or 1 week a month for 15 months. As the course dates and payment options vary for thise course, it is best that those interested should call us on 01293 529777 or visit the website on www.tradeskills4u.co.uk Those who have completed City & Guilds level 2 in Electrotechnical Technology the following knowledge units will need to be completed: 2357-302 (ELTK02) 2357-303 (ELTK03) 2357-307 (ELTK06) 2357-308 (ELTK07) 2357-309 (ELTK08) 2357-16 2357-17 2357-18 And the AM2 assessment: 2357-399 If you are interested in switching then please contact us on 01293 529777 and we will arrange an assessment to ensure you take exactly the right units required to pass the courses. 29 www.tradeskills4u.co.uk Book online at www.tradeskills4u.co.uk or call us on: 01293 529777 30