106 Telescopic slides CATAOGUE inear ball rails The linear motion solution
Chambrelan: The linear motion solution Chambrelan is a market leader with over 50 years manufacturing experience in the global linear motion industry. Chambrelan slides have been designed and developed to function properly in the hardest circumstances. That s why Chambrelan products are mounted and used in several applications like automatic doors, vehicle equipment, machine tool We are constantly developing our product range in order to meet your specific demands. Because of this evolution, take care and have a look on our website www.chambrelan.com. The entire technical information is daily updated. You can download technical data sheets in almost any CA format required on www.chambrelan.com. This allows you to integrate Chambrelan products in your application and easily modify them in case of technical developments. We trust you have a profitable use of this catalogue. From the staff of Chambrelan
Contents.......................................... 1 Quotation request: N1 In a detachable leaflet at the beginning of catalogue N2 To photocopy at the rear of catalogue Chambrelan overview............................... 2/3 A range of products designed for industrial applications....... 4 oads table in KGs per pair of slides: page 5 Specifications and available options...................... 6 Technical specifications of surface treatment............... 7 Technical specifications of Chambrelan telescopic slides...... 8 Mounting recommandations for Chambrelan telescopic slides.. 9 Chambrelan customised slides......................... 10 Example of applications.............................. 11 Product profiles telescopic slides.................... 12/48 Chambrelan linear rails........................... 49/50 Product profiles linear rails........................ 51/56 TEESCOPIC SIES PARTIA EXTENSION / 2 BEAMS Aluminium slide 402 p. 12 Steel slide R20 p. 13 R26 p. 14 R28 p. 15 R53 p. 16 R71 p. 17 R82 p. 18 R102 p. 19 Stainless steel slide ST48 p. 20 ST52 p. 21 OVER EXTENSION / 4 BEAMS Steel slide RA414 p. 42 RA654 p. 43 RA554R p. 44 E1904 p. 45 E1014 p. 46 E1024 p. 47 Stainless steel slide ST658 p. 48 TOTA EXTENSION / 3 BEAMS Aluminium slide 444 p. 22 500 p. 23 1422 p. 24 Steel slide RA31 p. 25 RA41 p. 26 RA44 p. 27 RA5R p. 28 RA7R p. 29 Steel rilsan slimslide RT3 p. 30 Steel slide E1400 p. 31 E1700 p. 32 E1902 p. 33 E1012 p. 34 E1020 p. 35 Stainless steel slide ST448 p. 36 ST509 p. 37 ST709 p. 38 E1708 p. 39 E1908 p. 40 E1018 p. 41 INEAR RAIS Steel rail E28 with carriers G40 or G41 p. 51 E53 G53 or G57 p. 51 E72 G70 or G72 p. 51 E46 G52 or G54 p. 52 E50 G52 or G54 p. 52 E48 G60 or G67 p. 53 E47 G60 or G67 p. 53 E98 G12 p. 54 Aluminium rail 409 with carrier A26 p. 55 408 A66 p. 55 Stainless steel rail ST45 with carriers GS55 or GS56 p. 56 Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 1
One site with: Production department, 2 3 5 4 6 9 10 7 8 1 Head office, workshops, commercial and technical department in e HAVRE Area: 11 000 m 2 Covered area: 7 000 m 2 1 - Raw material 2 - Preparation 3 - Cold drawing 4 - Straightening 5 - Finished sections 6 - Cutting 7 - Machining 8 - Production of ball cages 9 - Final assembly CHAMBREAN the only French manufacturer of slides: More than 5 000 000 slides have been sold in France and in the world since 1961 600 tons of raw material are processed per year Investments: between 200 000 and 500 000 euros per year by graded balls 10 - Finished products 2 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
commercial department, CHAMBREAN S commercial department consists of dedicated multilingual staff attending to the demands of our domestic and export markets. Contact us by phone, fax, Email: info@chambrelan.com Stock The most frequently ordered products are held in stock. Contact us to know the status of your orders. n stock items and customised slides can be produced competitively, even in small quantities. logistic department, Every day, slides are shipped to domestic and export markets. CHAMBREAN can co-ordinate world wide deliveries to suit you. technical department. Research and development Technical assistance The engineering department can provide you with a customised solution and recommend the right slide for your application. 3 - CA on www.chambrelan.com On www.chambrelan.com, the HEPER on line is available. It will give you standard answers suitable for normal usage. You can visualise data sheets or download them in every CA format. Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 3
Range of products designed for industrial applications by 6 points Easy to install Heavy duty slides You can find within this catalogue comprehensive data to allow a good and simple installation: load capacity, length, drilling scheme etc. More than 30 types of slides are available, which have a load capacity from a few kilos to more than 1000 KGs. Surface treatment On the website, you can find our product, including 3, in every standard CA format. 3 - CA on www.chambrelan.com Refer to the page 7. Steel, aluminium, stainless steel 3 Types of slides: steel, aluminium, stainless steel for standard application, corrosive environment or specific application. A large choice of extensions Partial extension, total extension or over extension: you have the choice among various systems with 2, 3 or 4 beams, some of which are compatible with double extension (two way movement). Partial extension Reduced maintenance CHAMBREAN slides have been designed to operate with a minimum maintenance in the most challenging of environments. Only under extreme conditions of use will they require some complementary maintenance. inear ball slides 0,7 Total extension >>> Refer to the page 49 to 56 Over extension 1,5 Personalised solutions The engineering department and commercial staff remain at your disposal for studying every specific request and for advising the right slides for your application. Refer to the page 10 More information Available option - p. 6 - End stops - Fittings for fixing - ocks - isconnect option - Treatment against corrosion - ouble extension Surface treatment - p. 7 Specifications - p. 8 - ength available in stock - oad capacity - eflection - Material - Tolerances - Temperatures - Speed of use Mounting recommendations - p. 9 Customised slides - p. 10 4 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
oad table in KGs per pair of slides The maximum safe load is given for a full extended pair of slides, mounted on the major axis, with a load spread uniformly along the inner beam. PARTIA EXTENSION TEESCOPIC SIES 2 beams Closed length (mm) page 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 402 - AU 12 7 15 25 50 45 40 32 25 18 15 10 R20 - STEE 13 39 37 35 33 30 28 25 23 20 17 15 13 10 R26 - STEE 14 85 90 95 90 85 80 75 70 65 60 55 50 45 40 35 R28 - STEE 15 65 60 55 50 48 45 43 40 38 35 33 30 28 25 R53 - STEE 16 120 130 135 130 125 120 115 110 105 100 95 90 85 80 75 65 55 45 35 25 R71 - STEE 17 300 320 310 300 290 280 270 260 250 240 230 220 210 200 190 170 150 130 110 90 70 50 30 R82 - STEE 18 430 470 510 495 485 470 460 445 435 410 385 360 335 310 285 260 235 210 185 160 R102 - STEE 19 450 550 650 750 850 950 1050 1000 950 850 800 750 700 600 550 500 450 400 350 300 ST48 - S.STEE 20 60 65 70 65 65 60 60 55 55 50 50 45 45 ST52 - S.STEE 21 115 120 115 110 105 100 95 90 85 80 75 70 65 60 50 40 30 TOTA EXTENSION TEESCOPIC SIES 3 beams Closed length (mm)page 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 444 - AU 22 62 60 57 55 53 50 48 45 43 40 38 35 30 25 500 - AU 23 75 80 77 75 73 70 65 60 55 50 45 40 35 30 20 1422 - AU 24 38 40 43 40 38 35 33 30 28 25 20 RA31 - STEE 25 49 52 55 55 53 50 48 45 43 40 38 35 32 30 28 25 20 10 RA41 - STEE 26 90 95 90 85 80 75 70 65 60 55 50 45 40 35 25 15 RA44 - STEE 27 80 83 80 78 75 73 70 65 60 55 50 45 40 35 30 20 RA5R - STEE 28 140 150 145 140 135 130 125 120 115 110 105 100 95 90 80 70 60 50 40 30 20 RA7R - STEE 29 300 340 335 330 325 305 305 300 295 290 280 270 265 250 230 210 190 170 150 130 110 90 70 50 30 RT3 - STEE Rilsan slimslide : refer to the table on page 30 E1400 - STEE 31 120 135 130 125 120 115 110 105 100 95 90 85 80 75 70 50 E1700 - STEE 32 550 555 565 550 535 518 500 485 465 430 395 360 325 290 225 220 185 150 115 80 E1902 - STEE 33 900 925 950 925 900 875 850 825 800 750 700 650 600 550 500 450 400 350 300 250 E1012 - STEE 34 925 950 975 1000 1000 1000 1000 950 900 850 800 750 700 600 550 500 450 400 350 300 E1020 - STEE 35 950 1000 1050 1100 1150 1200 1250 1200 1150 1100 1050 1000 950 900 850 800 750 700 650 600 ST448 - S.STEE 36 83 80 78 75 73 70 65 60 55 50 45 40 35 30 20 ST509 - S.STEE 37 125 130 125 120 115 110 105 100 95 90 85 80 75 70 60 50 40 ST709 - S.STEE 38 235 240 235 230 225 220 205 200 195 190 180 170 165 150 130 110 90 70 50 E1708 - S.STEE 39 550 555 565 550 535 518 500 485 465 430 395 360 325 290 255 220 E1908 - S.STEE 40 900 925 950 925 900 875 850 825 800 750 700 650 600 550 500 450 400 350 300 250 E1018 - S.STEE 41 925 950 975 1000 1000 1000 1000 950 900 850 800 750 700 600 550 500 450 400 350 300 OVER EXTENSION TEESCOPIC SIES 4 beams Closed length (mm) page 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 RA414 - STEE 42 50 55 60 56 53 50 46 43 40 36 33 30 RA654 - STEE 43 47 45 42 40 37 35 32 30 27 25 22 20 RA554 - STEE 44 85 90 95 90 85 80 75 70 65 60 55 50 45 35 25 15 E1904 - STEE 45 220 210 200 195 190 180 170 165 160 150 135 120 105 90 80 70 60 50 40 30 E1014 - STEE 46 350 375 400 425 450 475 500 475 450 400 375 350 325 300 275 250 225 200 175 150 E1024 - STEE 47 700 750 710 670 590 550 510 480 430 390 350 315 280 250 220 ST658 - S.STEE 48 47 45 42 40 37 35 32 30 Technical specifications are given for your guidance, and can be modified without notice. Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 5
Specifications and available options REINFORCE SIES We concentrate particularly on heavy duty slides. Among our products we have developed a range of slides we refer to as "reinforced". This characteristic consists of enclosing reinforced ball bearings within the body of the slides. This process restricts twisting of the beams under load.this modification enables the load capacity to be greatly increased at the same time as it reduces the pull-out and push-in forces. This type of product is highly recommended for mountings where the slide undergoes a torque or for mountings on the minor axis. EN STOPS CHAMBREAN slides are fitted with stops which limit the extension, both for opening and closing. 4 types of end stops are available for CHAMBREAN slides: End stop for intermediate load capacity. Intermediate end stop for average load capacity or for standard use. Shock absorbing spring on heavy duty slides. Some end stops in aluminium slides can be used as a retainer in the closed position. TREATMENT AGAINST CORROSION AN SURFACE TREATMENT: REFER TO THE PAGE 7 OCKS An optional locking device enables the slide to be held in the fully extended or closed position. Simply activate the mobile part of the latch to allow the drawer to fold back. Three locking types are possible, i.e.: - ock in the open position - ock in the closed position - ock in the open and closed positions NB: In most applications, depending on the drawer width, out of two slides only one may need to be fitted with a lock to retain the drawer or the mobile chassis in the required position. ISCONNECT OPTION isconnection is an option on some models which allows you to remove the inner beam from the slide and then to insert it again in the same slide. This option is necessary when installation is carried out in confined areas where it would be hard to mount standard slides or to gain access to equipment requiring maintenance. This system is very sensitive and, therefore, very sensitive to mishandling.that is why CHAMBREAN recommends that fast demountable systems, such as studs, are used as often as possible. OUBE EXTENSION (TWO WAY MOVEMENT) FITTINGS FOR FIXING Several mounting methods are possible on slides. For example, CHAMBREAN can deliver (depending on the slide): An extension towards the front or the back of the fixed beam can be supplied on some types of slides.though easy to set up on 2 beam slides, it requires specific latches on the three beam slides.this makes the setting up of an internal locking system impossible. Mounting tabs Pem studs Crimped screws or nuts 6 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
Technical specification for surface treatments All CHAMBREAN slides come with a treatment against corrosion. The standard treatment, i.e. zinc plating for steel slides and colourless anodization for aluminium versions, suits most uses. Other or extra treatments can be carried out according to the application or to the environmental requirements. STEE SIES CEAR ZINC PATING WITHOUT CHROM VI (RoHS) Standard treatment This standard treatment is conformed to RoHS European regulation. It consists of a zinc layer of an average 12 microns (with a minimum of 8) thickness. The average resistance of this treatment lasts up to 200 hours with the salt spray test before appearance of white rust and 600 hours with the salt spray test before appearance of red rust. AUMINIUM SIES CEAR ANOIZATION Standard treatment The standard treatment of the aluminium slides is clear anodization. Of clear grey in colour, it offers an anti-corrosive protection. In some applications we advise the use of stainless steel balls to increase the anticorrosion behaviour. This is an option, feel free to contact us. ZINC NICKE 12 15 % Optional A zinc-nickel surface treatment guarantees a high level of resistance against rust. Salt spray tests show results of over 800 hours before appearance of red rust depending on the type of profile. HAR ANOIZATION Optional Of a dark grey colour, it is used as anti-corrosive protection and transforms the surface layer of aluminium to give it, on the surface, a hardness close to that of steel. This zinc-nickel surface treatment meets the requirements of the RoHS European regulation. The zinc-nickel layer is resistant against rust at temperatures up to 900º Celsius and also in marine conditions. Further the zinc-nickel treatment gives protection against the influence of hydrogen and nitrogen or of vapour up to 400º Celsius. This surface treatment is also not effected by contact with organic acids and food, leaving no contamination on these products. This treatment is unsuitable for locking mechanism. GASEOUS NITRO-CARBURISING Optional This option ensures, in addition to anti-corrosive protection, a surface hardness of almost 35 HRC which ensures a better durability of the slide. Resistance to the marking of the raceways by the balls in the event of prolonged static position thus is largely improved. STAINESS STEE SIES EECTROYTIC POISHING Optional Electrolytic polishing which gives a shiny finish to the parts. We advise this protection for applications requiring high levels of cycle and vibration. Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 7
ENGTHS AVAIABE IN STOCK Standard slides are stocked in lengths 150 mm to 2000 mm. From 150 to 900 mm we comprehensively hold lengths with 50 mm increments. Beyond this, the sildes are stocked in 100 mm increments up to 2000 mm. OA CAPACITY The lengths kept in stock correspond to the usual requests. Others lengths are possible on request. The maximum safe load is given for a fully extended pair of slides, mounted on the major axis, with a load spread uniformly along the inner beam. TEMPERATURE Standard operating temperatures are up to 80 C, even for slides with plastic fitted parts. Technical specifications of CHAMBREAN telescopic slides Some slides can be used within temperatures from - 65 to + 250 C. If your slide is to be used in an application with an extreme temperature, please state when placing the order. MATERIA In this case, we have to adapt the slides by removing the possible non-metal elements and providing a very free movement allowing the expansion of the various parts without ceasing the slides. We also have to use a special grease. On the minor axis: 60% of the load capacity On the major axis: 100% of the load capacity CHAMBREAN makes its slide profiles by cold drawing or by machining in long lengths, usually 6 metres. This manufacturing method improves the quality of the steel used through the work hardening resulting from processing. So, a cold drawn XC10 used in models like the RA5R offers the quality of semi hard steel on its ball tracks. On heavy duty products, CHAMBREAN uses semi-hard steel, also work hardened. The balls are made of chromium steel (100C6). The working loads given in this catalogue include a high safety margin enabling the slides to operate in most applications. The safe working load depends on the extension, the type of mounting and the freguency of use. So an increased extension limits the safe load, whereas a reduced extension enables it to increase its performance. When the slides are mounted on the minor axis, it is advisable to reduce the safe working load by around 40% depending on the slide. MANUFACTURING TOERANCES / THICKNESS TOERANCES The general manufacturing tolerances of slides and linear rails conform to the js13 standard. The slide is an assembly of profiles,each of them presenting tolerances of 1 mm per metre in straightness and of 1 per metre in twisting. We take up these tolerances by fitting different diameters of ball bearings. This leads to a thickness tolerance up to 0.6 mm. EFECTION eflection is the non permanent deformation measured in mm s when the slides are uniformly loaded, fully extended and mounted on the major axis. SPEE OF USE The maximum speed of use for Chambrelan telescopic slide is 0.3m/s. Our slides are recommended and tested to 1% of the closed length. With a mounting on the minor axis, the deflection will be increased. 8 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
Mounting recommendations for Chambrelan telescopic slides MOUNTING INTENSIVE USE CHAMBREAN slides are reliable and robust products. Mounted on the major axis, per pair, with a uniformly distributed load, CHAMBREAN slides will give you complete satisfaction. The rules for good mounting are: 1 - Use all the fixings provided 2 - Make sure the slides are parallel 3 - Align fronts of slides (important especially in case of locking devices) 4 - Make sure the mounting surfaces are flat and even. Following the mounting rules will guarantee smooth and steady running of the slides as well as an optimum lifespan. MOUNTING ON A MINOR AXIS / MOUNTING WITH TORQUE In case of intensive use (slides working on assembly lines with opening and closing cycle every minute 24 hours/day), CHAMBREAN advises two adaptations: 1 - Use larger model slide. 2 - Gaseous Nitro-Carburising treatment for a better resistance to wear (higher superficial hardness on ball tracks). SIING OORS The mounting should preferably be carried out with linear slides which ensure guidance all along the travel and so no deflection is measured. Nevertheless, telescopic slides may be used when unrestricted access through the opening is required. In this case you have to keep in mind the deflection at the end of the slide: this deflection can be prevented by using a wheel under the front end of the door. Important reminder: when mounting on the minor axis, the load capacity of the slides is reduced by 40% compared with the basic load. In that case you recommend you use reinforced slides which are more suited to this kind of stress. Take care, both deflection and pull in / pull out forces will increase. VERTICA MOUNTING The slides should be laid out on the major axis: their load endurance is at its longest in this position. Contact us. In an up and down vertical mounting (for example a machine guard in a machine tool) it is better to use linear slides equipped with carriers. NB: When ball bearing slides, designed to operate horizontally, are used in an upright or inclined application, ball cages shift downwards because of gravity. This shift will cause a progressive loss of extension. There are technical solutions to improve the operation and hold of the slides. A common and practical adaptation for some users is to use type "BB" slides when a fixed slide carries 2 panels, which extend on both sides to open a way. This type of system can be used for access doors. Contact us. MOUNTING IN A POUTE ENVIRONMENT CHAMBREAN slides come without a protection device or system against dust, particles, etc. There is a risk that the presence of impurities in the tracks may rapidly cause jamming, ceasing or premature wear of slides. Consequently, it is important to allow the slides to be installed in a protected area or to implement the necessary protection measures at the time of the system design. Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 9
Adjusted to your need CHAMBREAN customised slides The performance characteristics given within this catalogue correspond to standard manufacture or usual applications. Our position as manufacturer enables us to offer great flexibility in order to meet the most specific of requirements. So CHAMBREAN can adapt: Optional lengths rillings,diameters and hole centres Surface treatments and fittings for fixing ocks ock in, lock out, lock in and out: this option is available on almost all of the CHAMBREAN range. Modularity Our position as manufacturer enables us to offer you numerous adaptations of our products. In addition, some telescopic products can also be combined increasing the possibilities of design. Telescopic slides i.e. can be combined with linear products. Extension The amount of extension can be adjusted to the conditions of use. This adjustment is made in relation to the length of the ball cage. The extension can thus be increased or reduced up to 110% of the catalogue extension. BOXES FITTE WITH SIES These industrial batteries mounted in boxes have to be taken out with a minimum of stress. Accessibility, easy removing and remounting are vital. In this case, the solution consists of fitting brackets with position pins onto the slide increasing the extension of the slide to allow a quick access of the back of the drawer. using nitrurated slide. This treatment enable the mechanical qualities of the slide to be improved as well as offering reinforced protection. 10 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
CHAMBREAN slides are used in a wide range of technical and industrial markets Railway market maintenance equipment, automatic doors Special vehicles farming machines, utility vehicles rescue vehicles industrial truck bodies Machine tool protection hooding, doors, equipment, accessories Flying, Navy, Military market Equipment, accessories, fitting out Mechanical engineering inear motion, production tools Electronic / data processing market / banking Monitors, racks, bays, cash dispensers Medical market Medical equipment, pharmacology 11
TEESCOPIC SIE Partial extension 402 AUMINIUM For steel model, see page 15 For stainless steel model, see page 20 Unsuitable for a mounting on the minor axis 18 5 1.8 M4x0.7 ø 5 csk 90 ø 8.5 1 9.5 30 oad: Protection: 150 to 650 mm 50 to 7 kg clear anodisation Version ata sheet n Standard 051 ock out 151 ock in 251 ock out and in 351 ouble extension 451 ock out + disconnect 551 (46 model) Standard closed lengths: 402 Closed length (mm) 150 200 250 300 350 400 450 500 550 600 650 Extension (mm) 70 120 160 180 230 280 300 330 350 400 450 oad per pair (kg) 7 15 25 50 45 40 32 25 18 15 10 rilling scheme 3 CA on www.chambrelan.com < 250 13.5 36.5 (50) 7.5-50 250 13.5 36.5 50 50 50 (50) 7.5 /2-50 -50 12 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE 25.5 Unsuitable for a mounting on the minor axis Partial extension For countersunk screw M4 1.5 1.5 0.9 11.2 Standard closed lengths: R20 For countersunk screw M4 36.5 Caution: A slight countersinking of the frame is required (see sketch below) oad: Protection: R20 STEE 200 to 800 mm 39 to 10 kg Version ata sheet n Standard 001 ock out ock in ock out and in ouble extension isconnect Closed length (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 Extension (mm) 125 175 225 260 295 330 380 415 450 485 520 540 560 oad per pair (kg) 39 37 35 33 30 28 25 23 20 17 15 13 10 Partial extension slides Total extension slides rilling scheme 3 CA on www.chambrelan.com 50 (50) Over extension slides 1 Frame's countersinking 1.5 1.5 For countersunk screw M4 Example EQUIPMENT FOR KITCHEN TROEY inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 13
TEESCOPIC SIE Partial extension R26 STEE 2 2 oad: Protection: 200 to 900 mm 95 to 35 kg 26 For countersunk screw M4 For countersunk screw M4 37.8 Version ata sheet n Standard 003 ock out ock in ock out and in ouble extension isconnect Unsuitable for a mounting on the minor axis 1.5 13.2 Standard closed lengths: R26 Closed length (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 Extension (mm) 125 175 225 260 295 330 380 415 450 485 520 540 560 580 615 oad per pair (kg) 85 90 95 90 85 80 75 70 65 60 55 50 45 40 35 rilling scheme 3 CA on www.chambrelan.com 50 (50) Advice HIGH TEMPERATURES Standard working temperatures of CHAMBREAN slides are between 15 and + 80 C Beyond these temperatures adaptations should be made to guarantee performance: use of alternative materials and specific grease (for high temperature, low temperature, food processing, free mounting). Feel free to contact us 14 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For aluminium model, see page 12 For stainless steel model, see page 20 Partial extension 18 M4x0.7 0.7 9.7 5.2 2.3 ø 4.2 csk 90 ø 8.5 28 oad: Protection: R28 STEE 250 to 900 mm 65 to 25 kg Version ata sheet n Standard 028 ock out ock in ock out and in ouble extension 428 isconnect Partial extension slides Standard closed lengths: R28 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 Extension (mm) 165 200 230 265 300 330 365 400 430 465 500 530 565 600 oad per pair (kg) 65 60 55 50 48 45 43 40 38 35 33 30 28 25 Total extension slides rilling scheme 3 CA on www.chambrelan.com 13.5 36.5 50 50 50 (50) 7.5 /2-50 -50 Over extension slides Advice Specify: Its reference (a reference corresponds to one specific type of slide: section, number of parts, material, treatment, stop ). Its closed length (which conditions the extension length). The required options and adaptations. on t forget, if need be, to specify the conditions of use TO ORER THE APPROPRIATE SIE Think about the options and customization of the slides you will need ength Fixing Surface treatment Stops ocks isconnect option inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 15
TEESCOPIC SIE Partial extension R53 STEE For stainless steel model, see page 21 9 3.5 oad: Protection: 200 to 1400 mm 135 to 25 kg Version ata sheet n 19 M6x1 ø 5.2 csk 90 ø 10.5 34 Standard 009 ock out 109 ock in 209 ock out and in 309 ouble extension 409 isconnect 1 16 Standard closed lengths: R53 Closed length (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 Extension (mm) 80 130 180 230 280 310 340 370 400 430 480 510 540 570 600 680 740 800 880 940 oad per pair (kg) 120 130 135 130 125 120 115 110 105 100 95 90 85 80 75 65 55 45 35 25 rilling scheme 3 CA on www.chambrelan.com < 250 15 35 (50) 7.5-50 250 15 35 50 50 50 (50) 7.5 /2-50 -50 16 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For stainless steel model contact us 28 Partial extension 12.5 M8x1.25 ø 6.2 csk 90 ø 12.5 5 45 oad: Protection: R71 STEE 200 to 1700 mm 320 to 30 kg Version ata sheet n Standard 005 ock out 105 ock in 205 ock out and in 305 ouble extension 405 isconnect Partial extension slides 2 21 Standard closed lengths: R71 Closed length (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 Extension (mm) 80 130 180 230 280 310 340 370 400 430 480 510 540 570 600 680 740 800 880 940 1020 1080 1140 oad per pair (kg) 300 320 310 300 290 280 270 260 250 240 230 220 210 200 190 170 150 130 110 90 70 50 30 Total extension slides rilling scheme 3 CA on www.chambrelan.com < 250 15 35 (50) 7.5-50 Over extension slides 250 15 35 50 50 50 (50) 7.5 /2-50 -50 inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 17
TEESCOPIC SIE Partial extension R82 STEE 11 6 oad: Protection: 500 to 2000 mm 510 to 160 kg Version ata sheet n M10x1.5 ø 8.5 csk 90 ø 16.5 Standard 006 ock out ock in 206 ock out and in ouble extension 406 isconnect 48 30 78 2 21 Standard closed lengths: R82 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 230 280 330 380 430 456 482 508 534 610 662 738 790 842 918 946 1022 1074 1126 1202 oad per pair (kg) 430 470 510 495 485 470 460 445 435 410 385 360 335 310 285 260 235 210 185 160 rilling scheme 3 CA on www.chambrelan.com 23 77 100 100 100 (100) 15 /2-25 50-50 18 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE Partial extension 12.7 8.4 M10x1.5 ø 8.5 csk 90 ø 17 68 45 97.7 oad: Protection: R102 STEE 500 to 2000 mm 1050 to 300 kg Version ata sheet n Standard 007 ock out ock in ock out and in ouble extension 407 isconnect Partial extension slides 1 24 Standard closed lengths: R102 scale 0.75 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 230 280 330 380 430 456 482 508 534 610 662 738 790 842 918 946 1022 1074 1126 1202 oad per pair (kg) 450 550 650 750 850 950 1050 1000 950 850 800 750 700 600 550 500 450 400 350 300 Total extension slides rilling scheme < 700 < 700 3 CA on www.chambrelan.com 23 77 (100) 15 /2-25 50-50 Over extension slides 700 23 77 200 200 200 (100) 15 /2-25 -50 50 inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 19
TEESCOPIC SIE Partial extension ST48 STAINESS STEE For steel model, see page p.15 For aluminium model, see page 12 20 M4x0.7 6 2.5 ø 4.2 csk 90 ø 8.5 35 200 to 800 mm oad: 70 to 45 kg Version ata sheet n Standard 068 ock out ock in ock out and in ouble extension isconnect Unsuitable for a mounting on the minor axis 0.5 9 Standard closed lengths: ST48 Closed length (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 Extension (mm) 68 118 168 218 268 293 318 343 393 433 463 500 533 oad per pair (kg) 60 65 70 65 65 60 60 55 55 50 50 45 45 rilling scheme 3 CA on www.chambrelan.com 50 < 250 13.5 36.5 (50) 7.5-50 250 13.5 36.5 50 50 50 (50) 7.5 /2-50 -50 20 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For steel model, see page 16 M6x1 19 Partial extension 9.5 3 ø 5.2 csk 90 ø 10.5 35 ST52 STAINESS STEE oad: 250 to 1200 mm 120 to 30 kg Version ata sheet n Standard 067 ock out 167 ock in 267 ock out and in 367 ouble extension 467 isconnect Partial extension slides 1.8 15 Standard closed lengths: ST52 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 Extension (mm) 130 180 230 280 310 340 370 400 430 480 510 540 570 600 680 740 800 oad per pair (kg) 115 120 115 110 105 100 95 90 85 80 75 70 65 60 50 40 30 Total extension slides rilling scheme 3 CA on www.chambrelan.com 15 35 50 50 50 (50) 7.5 /2-50 -50 Over extension slides Information OCKING An optional locking device enables the slide to be held in either the fully extended and/or closed position. Simply activate the mobile part of the latch to allow the drawer to fold back. Three locking types are possible, i.e.: ock in the open position (A) ock in the closed position (B) ock in the open and closed positions. (C) A B C inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 21
TEESCOPIC SIE Total extension 444 AUMINIUM For steel model, see page 27 For stainless steel model, see page 36 18 M4x0.7 2.2 ø 4.2 csk 90 ø 8.5 22 44.5 oad: Protection: 150 to 800 mm 62 to 25 kg clear anodisation Version ata sheet n Standard 052 ock out 152 ock in 252 ock out and in 352 ouble extension ock out + isconnect : 552 (446 model) Unsuitable for a mounting on the minor axis 3 0.5 12.5 Standard closed lengths: 444 Closed length (mm) 150 200 250 300 350 400 450 500 550 600 650 700 750 800 Extension (mm) 163 213 263 313 363 413 463 513 563 613 663 713 763 813 oad per pair (kg) 62 60 57 55 53 50 48 45 43 40 38 35 30 25 rilling scheme 3 CA on www.chambrelan.com < 250 13 37 (50) 7.5 (7.5) 250 13 37 50 50 50 (50) 7.5 (7.5) 22 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For steel model, see page 28 For stainless steel model, see page 37 19 M6x1 Total extension 6.5 3 ø 5.2 csk 90 ø10.5 22 53.7 500 AUMINIUM oad: Protection: 250 to 1000 mm 80 to 20 kg clear anodisation Version ata sheet n Standard 053 ock out 153 ock in 253 ock out and in 353 ouble extension 453 ock out + isconnect : 553 (505 model) Partial extension slides Unsuitable for a mounting on the minor axis 0.7 2.6 15.3 Standard closed lengths: 500 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 Extension (mm) 265 315 365 415 465 515 656 615 665 715 765 815 865 915 1015 oad per pair (kg) 75 80 77 75 73 70 65 60 55 50 45 40 35 30 20 Total extension slides rilling scheme 3 CA on www.chambrelan.com Information End stop for intermediate load capacity. 15 35 50 50 50 (50) 7.5 (7.5) EN STOPS CHAMBREAN slides are fitted with stops which limit the extension, 4 types of end stops are available. Take care, you can t exchange them. Intermediate end stop for average load capacity or for standard used. Shock absorbing spring on heavy duty slides, both for opening and closing. NB/ Caution: on t be mistaken between end stop and locking mechanism (refer to the page 6 and 10) Some end stops in aluminium slides can be used as a retainer in the closed position. Over extension slides inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 23
TEESCOPIC SIE Total extension 1422 AUMINIUM For steel model, see page 31 6 oad: Protection: 150 to 650 mm 43 to 20 kg Clear anodisation Unsuitable for a mounting on the minor axis M4x0.7 15 18 29 Version ata sheet n Standard 055 ock out ock in ock out and in ouble extension isconnect 16 Standard closed lengths: 1422 Closed length (mm) 150 200 250 300 350 400 450 500 550 600 650 Extension (mm) 160 200 255 315 360 400 455 500 555 615 665 oad per pair (kg) 38 40 43 40 38 35 33 30 28 25 20 rilling scheme 3 CA on www.chambrelan.com < 250 < 250 13.5 50 (50) 13.5 250 13.5 50 50 50 50 (50) 13.5 Advice CHAMBREAN slides have been designed and manufactured for standard use with a uniform load spread uniformly along the beams: Horizontal mounting in the major axis, with uniformly distributed load. SPECIA MOUNTING Standard slides can not be used for applications such as vertical mounting (up and down), overhanging, excessive heat, corrosive environment, dust... Should you require the slide to be adapted for use in any of the above conditions, our design department remains at your disposal. 24 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE 25.5 For countersunk screw M4 Total extension 2.8 1.5 For countersunk screw M4 48 RA31 STEE 150 to 1100 mm oad: 55 to 10 kg Protection: Version ata sheet n Standard 016 ock out ock in ock out and in ouble extension isconnect Partial extension slides Unsuitable for a mounting on the minor axis 15.3 Standard closed lengths: RA31 1 Caution: A slight countersinking of the frame is required (see sketch below) Closed length (mm) 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 Extension (mm) 155 215 270 310 365 420 460 515 570 610 665 720 760 815 870 910 1020 1115 oad per pair (kg) 49 52 55 55 53 50 48 45 43 40 38 35 32 30 28 25 20 10 Total extension slides rilling scheme 3 CA on www.chambrelan.com 1 Frame's countersinking 1.5 1.5 For countersunk screw M4 150 155 25 100 (25) Over extension slides 150 200 50 (50) inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 25
TEESCOPIC SIE Total extension RA41 STEE 3.7 2 Closed length : oad: Protection: 250 to 1100 mm 95 to 15 kg Version ata sheet n 26 For countersunk screw M4 For countersunk screw M4 50 Standard 017 ock out ock in ock out and in ouble extension isconnect 1.5 Unsuitable for a mounting on the minor axis 17.7 Standard closed lengths: RA41 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 Extension (mm) 270 310 365 420 460 515 570 610 665 720 760 815 870 910 1020 1115 oad per pair (kg) 90 95 90 85 80 75 70 65 60 55 50 45 40 35 25 15 rilling scheme 3 CA on www.chambrelan.com 50 (50) Advice MOUNTING RUES The observation of simple mounting rules will guarantee a smooth and steady running of the CHAMBREAN slides. Mounting on the major axis Ensure both slides run parallel to each other Apply a uniformly distributed load Resistance when opening or closing the slide could indicate a problem of parallelism or an imperfect alignment. 26 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For aluminium model, see page 22 For stainless steel model, see page 36 5.2 Total extension 2.6 ø 4.2 csk 90 ø 8.5 18 22 44.5 M4x0.7 oad: Protection: RA44 STEE 200 to 1000 mm 83 to 20 kg Version ata sheet n Standard 013 ock out 113 ock in 213 ock out and in 313 ouble extension isconnect Partial extension slides Unsuitable for a mounting on the minor axis 0.5 12.6 2.9 Standard closed lengths: RA44 Closed length (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 Extension (mm) 213 263 313 365 413 463 513 563 613 663 713 763 813 863 913 1013 oad per pair (kg) 80 83 80 78 75 73 70 65 60 55 50 45 40 35 30 20 Total extension slides rilling scheme < 250 < 250 3 CA on www.chambrelan.com 13 37 (50) 7.5 (7.5) Over extension slides 250 13 37 50 50 50 (50) 7.5 (7.5) inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 27
TEESCOPIC SIE Total extension RA5R STEE For aluminium model, see page 23 For stainless steel model, see page 37 10 M6x1 19 22 54 3 ø 5.2 csk 90 ø 10.5 oad: Protection: 250 to 1600 mm 150 to 20 kg Version ata sheet n Standard 019 ock out 119 ock in 219 ock out and in 319 ouble extension 419 isconnect 2.1 1.5 20.1 Standard closed lengths: RA5R Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 Extension (mm) 275 315 375 415 475 515 575 615 675 715 775 815 875 915 1015 1115 1215 1315 1415 1515 1615 oad per pair (kg) 140 150 145 140 135 130 125 120 115 110 105 100 95 90 80 70 60 50 40 30 20 rilling scheme 3 CA on www.chambrelan.com 15 35 50 50 50 (50) 25 7.5 (7.5) Information An extension towards the front or the back of the fixed beam can be supplied on some slides. Though easy to set up on 2 beam slides a special device is required on 3 beam slides. This makes the setting up of an internal locking system impossible. OUBE EXTENSION 28 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For stainless steel model, see page 38 28 12.5 M8x1.25 Total extension ø 6.5 csk 90 ø 12.5 35 68 oad: Protection: RA7R STEE 250 to 2000 mm 340 to 30 kg Version ata sheet n Standard 018 ock out 118 ock in 218 ock out and in 318 ouble extension - lg max 1000 mm 418 isconnect Partial extension slides 2.2 5.6 26 Standard closed lengths: RA7R Total extension slides Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 10001100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 275 315 375 415 475 515 575 615 675 715 775 815 875 915 10151115 1215 1315 1415 1515 1615 1715 1815 1915 2015 oad per pair (kg) 300 340 335 330 325 305 305 300 295 290 280 270 265 250 230 210 190 170 150 130 110 90 70 50 30 rilling scheme 3 CA on www.chambrelan.com < 300 < 300 15 35 (50) 7.5 (7.5) Over extension slides 300 15 35 50 50 50 (50) 7.5 (7.5) inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 29
TEESCOPIC SIE Total extension RT3 STEE RISAN 1.5 1 oad: Protection: 248 to 603 mm 65 to 35 kg + rilsan 17 ø 4 csk 90 ø 7 35 (for M3 screw) Version ata sheet n Standard 041 ock out ock in ock out and in ouble extension isconnect yes Unsuitable for a mounting on the minor axis 11 12.8 Standard closed lengths: RT3 Closed length (mm) 248 298 349 400 451 502 552 603 Extension (mm) 273 324 375 425 476 527 578 629 oad per pair (kg) 65 60 55 50 48 45 40 35 rilling scheme 3 CA on www.chambrelan.com 12.7 50.8 50.8 50.8 50.8 50.8 50.8 50.8 Advice AJUSTE TO YOUR NEE The performance characteristics given within this catalogue correspond to standard manufacture or usual applications. Our position as manufacturer enables us to offer great flexibility in order to meet the most specific of requirements. CHAMBREAN staff remains at your disposal to review any specific requests and advise on the right slide for your application. So CHAMBREAN can adapt: - Beam lengths - Optional lengths - rillings, diameters and hole centres - Surface treatments - - Fixing methods 30 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For aluminium model, see page 24 Total extension 5.2 18 29 M4x0.7 15 16 E1400 STEE oad: Protection: 200 to 1000 mm 135 to 50 kg Version ata sheet n Standard 021 ock out 121 ock in ock out and in ouble extension isconnect Partial extension slides Standard closed lengths: E1400 Closed length (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 Extension (mm) 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 oad per pair (kg) 120 135 130 125 120 115 110 105 100 95 90 85 80 75 70 50 Total extension slides rilling scheme 3 CA on www.chambrelan.com < 250 50 (50) < 250 > 250 250 50 50 50 50 (50) Over extension slides Advice SIES MOUNTE ONE NEXT TO ANOTHER Some applications require slides mounted one next to another Example: Access door.. In this case, CHAMBREAN staff will give you technical advice for specific mounting methods. inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 31
TEESCOPIC SIE Total extension E1700 STEE For stainless steel model, see page 39 9 oad: Protection: 500 to 2000 mm 565 to 80 kg Version ata sheet n M6x1 M6x1 22 38 60 Standard 023 ock out ock in ock out and in ouble extension 423 isconnect 30 32 Standard closed lengths: E1700 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 oad per pair (kg) 550 555 565 550 535 518 500 485 465 430 395 360 325 290 225 220 185 150 115 80 rilling scheme 3 CA on www.chambrelan.com 50 26 50 50 50 (50) 32 32 26 Advice MAXIMUM OA The maximum loads given in this catalogue have been established for standard applications. oad capacities are the maximum forces that slides can withstand per pair, mounted on the major axis, in the extended position. With a mounting on a minor axis, the load capacities of the slides are reduced around 40% (depending on the slide). The deflection and the pull in and out will be increased. Over extension of the beams reduces the load carrying capacity of the slide. ikewise, under extension increases the capacity. SIING SYSTEM FOR SPECIAIZE MACHINE 32 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For stainless steel model, see page 40 M10x1.5 Total extension 11 E1902 STEE Closed lengt:h 500 to 2000 mm oad: 950 to 250 kg Protection: Version ata sheet n Standard 024 ock out ock in ock out and in ouble extension isconnect Partial extension slides 30 48 78 34 Total extension slides 36 Standard closed lengths: E1902 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 oad per pair (kg) 900 925 950 925 900 875 850 825 800 750 700 650 600 550 500 450 400 350 300 250 rilling scheme 3 CA on www.chambrelan.com Over extension slides 100 26 100 100 100 (100) 32 32 26 inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 33
TEESCOPIC SIE Total extension E1012 STEE For stainless steel model, see page 41 11.2 oad: Protection: 500 to 2000 mm 1000 to 300 kg M10x1.5 45 68 97.7 Version ata sheet n Standard 025 ock out ock in ock out and in ouble extension 425 isconnect 35.8 37.7 scale 0.75 Standard closed lengths: E1012 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 oad per pair (kg) 925 950 975 1000 1000 1000 1000 950 900 850 800 750 700 600 550 500 450 400 350 300 rilling scheme 3 CA on www.chambrelan.com < 650 < 650 26 100 (100) 32 650 26 100 200 200 200 (100) 32 34 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE M10x1.5 Total extension 17 E1020 STEE 500 to 2000 mm oad: 1250 to 600 kg Protection: Version ata sheet n Standard 026 ock out ock in ock out and in ouble extension isconnect Partial extension slides 60 98 136 Total extension slides 46 50 scale 0.75 Standard closed lengths: E1020 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 oad per pair (kg) 950 1000 1050 1100 1150 1200 1250 1200 1150 1100 1050 1000 950 900 850 800 750 700 650 600 rilling scheme 3 CA on www.chambrelan.com Over extension slides 26 32 100 200 200 200 (100) 32 26 inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 35
TEESCOPIC SIE Total extension ST448 STAINESS STEE For steel model, see page 27 For aluminium model, see page 22 20 M4x0.7 6 2.5 ø 4.2 csk 90 ø 8.5 22 50 250 to 1000 mm oad: 83 to 20 kg Version ata sheet n Standard 069 ock out 169 ock in 359 ock out and in 369 ouble extension isconnect Unsuitable for a mounting on the minor axis 1.5 0.5 12 Standard closed lengths: ST448 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 Extension (mm) 263 313 363 413 463 513 563 613 663 713 763 813 863 913 1013 oad per pair (kg) 83 80 78 75 73 70 65 60 55 50 45 40 35 30 20 rilling scheme 3 CA on www.chambrelan.com 13 37 50 50 50 (50) 7.5 (7.5) Advice ASK FOR A CUSTOMISATION OF YOUR SIES CHAMBREAN design department remain at your disposal to review your application and offer the solution best suited to your needs. ock in ock out Gaseous Nitro-Carburising Mounting parts 36 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For aluminium model, see page 23 For steel model, see page 28 19 M6x1 Total extension 2.7 ø 5.2 csk 90 ø 10.5 22 51.7 ST509 STAINESS STEE oad: 250 to 1200 mm 130 to 40 kg Version ata sheet n Standard 062 ock out 162 ock in 262 ock out and in 362 ouble extension 462 isconnect Partial extension slides 5.5 1.8 20 Standard closed lengths: ST509 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 Extension (mm) 275 315 375 415 475 515 575 615 675 715 775 815 875 915 1015 1115 1215 oad per pair (kg) 125 130 125 120 115 110 105 100 95 90 85 80 75 70 60 50 40 Total extension slides rilling scheme 3 CA on www.chambrelan.com 15 35 50 50 50 (50) 25 7.5 (7.5) Over extension slides Advice MAINTENANCE, UBRICATION OF SIES Slides are delivered with a slight lubrication. Feel free to add complementary grease to enable an optimal lifespan. In aggressive conditions of use (abrasive materials, humidity, dust...) ensure a systematic and regular maintenance with complete cleaning of the slide and lubrication. Example MIITARY EQUIPEMENT inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 37
TEESCOPIC SIE Total extension ST709 STAINESS STEE For steel model, see page 29 28 M8x1.25 12.2 3.2 ø 6.2 csk 90 ø 12.5 35 68 250 to 1400 mm oad: 240 to 50 kg Version ata sheet n Standard 071 ock out 171 ock in 271 ock out and in 371 ouble extension 471 isconnect 4.4 3.7 25.7 Standard closed lengths: ST709 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 Extension (mm) 275 315 375 415 475 515 575 615 675 715 775 815 875 915 1015 1115 1215 1315 1415 oad per pair (kg) 235 240 235 230 225 220 205 200 195 190 180 170 165 150 130 110 90 70 50 Customized slides for standard and specific application are on request rilling scheme 3 CA on www.chambrelan.com < 300 15 35 (50) 7.5 (7.5) 300 15 35 50 50 50 (50) 7.5 (7.5) 38 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For steel model, see page 32 M6x1 Total extension 9 M6x1 22 38 60 E1708 STAINESS STEE 500 to 1600 mm oad: 565 to 220 kg Version ata sheet n Standard 063 ock out ock in ock out and in ouble extension isconnect Partial extension slides 30 32 Standard closed lengths: E1708 Total extension slides Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 Extension (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 oad per pair (kg) 550 555 565 550 535 518 500 485 465 430 395 360 325 290 255 220 rilling scheme 50 26 32 3 CA on www.chambrelan.com 50 50 50 (50) 32 26 Over extension slides Information STAINESS STEE SIES 9 stainless steel slides for specific environment : food preparation areas, clean rooms, corrosive area inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 39
TEESCOPIC SIE Total extension E1908 STAINESS STEE For steel model, see page 33 M10x1.5 11 M10x1.5 30 48 78 500 to 2000 mm oad: 950 to 250 kg Version ata sheet n Standard 064 ock out ock in ock out and in ouble extension isconnect 34 36 Standard closed lengths: E1908 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 oad per pair (kg) 900 925 950 925 900 875 850 825 800 750 700 650 600 550 500 450 400 350 300 250 rilling scheme 3 CA on www.chambrelan.com 100 26 100 100 100 (100) 32 32 26 Advice What do you do if you have to mount a drawer in an oven? For mountings in hot enclosed spaces or furnaces, the maximum temperature we recommend is 250 C (few slides can be used in such application). In this case, we have to adapt the slides by removing the nonmetal elements and by providing a very free movement. Allowing the expansion of the various parts without ceasing the slides. Consult us. What do you do if the environment is dirty? CHAMBREAN slides come without a protection device or system against dust, particles, etc. There is a risk that the presence of impurities in the tracks may rapidly cause jamming or ceasing, and thus, premature wear of slides. Consequently, it is important to allow the slides to be installed in a protected area or to find the necessary protection solutions at the time of the system design. 40 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For steel model, see page 34 M10x1.5 Total extension 11.2 M10x1.5 45 68 98 E1018 STAINESS STEE 500 to 2000 mm oad: 1000 to 300 kg Version ata sheet n Standard 065 ock out ock in ock out and in ouble extension isconnect Partial extension slides 36 38 scale 0.75 Total extension slides Standard closed lengths: E1018 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 oad per pair (kg) 925 950 975 1000 1000 1000 1000 950 900 850 800 750 700 600 550 500 450 400 350 300 rilling scheme 3 CA on www.chambrelan.com < 650 < 650 100 (100) 23 25 25 23 Over extension slides 650 23 25 100 200 200 200 (100) 25 23 inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 41
TEESCOPIC SIE Over extension RA414 STEE technical evolution 2 2 oad: Protection: 250 to 800 mm 60 to 30 kg Version ata sheet n 26 For countersunk screw M4 For countersunk screw M4 64 Standard 036 ock out ock in ock out and in ouble extension isconnect Unsuitable for a mounting on the minor axis 3.8 3.7 1.5 21.9 Standard closed lengths: RA414 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 Extension (mm) 380 455 525 605 685 755 830 900 975 1055 1125 1200 oad per pair (kg) 50 55 60 56 53 50 46 43 40 36 33 30 rilling scheme 3 CA on www.chambrelan.com 50 (50) Example SIING SYSTEM for specialized machinery 42 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE For stainless steel model, see page 48 18 5.2 M4x0.7 Over extension 2.5 ø 5.5 csk 90 ø 10.4 35 60 RA654 STEE oad: Protection: 250 to 800 mm 47 to 20 kg Version ata sheet n Standard 031 ock out 131 ock in 231 ock out and in 331 ouble extension isconnect Partial extension slides Unsuitable for a mounting on the minor axis 1 3 0.5 15.5 Total extension slides Standard closed lengths: RA654 Closed length (mm) 250 300 350 400 450 500 550 600 650 700 750 800 Extension (mm) 375 450 525 600 675 750 825 900 975 1050 1125 1200 oad per pair (kg) 47 45 42 40 37 35 32 30 27 25 22 20 rilling scheme 3 CA on www.chambrelan.com 50 50 50 50 (50) 13 7.5 (7.5) Over extension slides Information eflection is the non permanent deformation measured in mm s when the slides, mounted on the major axis, are loaded and fully extended uniformly. Our slides are recommended and tested to 1% of the closed length. eflection 1% of closed length Standard load capacity, with a uniform load spread evenly along the beams inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 43
TEESCOPIC SIE Over extension RA554 STEE ø6.5 csk 90 ø 12.5 19 M6x1 35 68 oad: Protection: 300 to 1200 mm 95 to 15 kg Version ata sheet n Standard 032 ock out 132 ock in 232 ock out and in 332 ouble extension isconnect 0.9 4.4 0.7 25 3 Standard closed lengths: RA554 Closed length (mm) 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 Extension (mm) 470 540 630 700 770 840 930 1000 1070 1140 1230 1300 1370 1530 1670 1830 oad per pair (kg) 85 90 95 90 85 80 75 70 65 60 55 50 45 35 25 15 rilling scheme 3 CA on www.chambrelan.com 15 50 50 50 50 (50) 25 7.5 (7.5) Information The working loads given in this catalogue have been established for a pair of slides, mounted on the major axis, uniformly loaded in the extended position. On the major axis 100% of the load capacity On the minor axis 60% of the load capacity 44 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE 11 Over extension M10x1.5 E1904 STEE 500 to 2000 mm oad: 220 to 30 kg Protection: Version ata sheet n Standard 033 ock out ock in ock out and in ouble extension isconnect Partial extension slides 28 M8x1.25 30 48 78 8 M10x1.5 Total extension slides 2.6 1 45.6 Standard closed lengths: E1904 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 760 840 900 980 1060 1140 1200 1280 1360 1500 1660 1800 1960 2100 2260 2400 2560 2700 2860 3000 oad per pair (kg) 220 210 200 195 190 180 170 165 160 150 135 120 105 90 80 70 60 50 40 30 Over extension slides rilling scheme 3 CA on www.chambrelan.com 26 100 100 100 100 (100) 32 32 26 inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 45
TEESCOPIC SIE Over extension E1014 STEE 9 11.2 oad: Protection: 500 to 2000 mm 500 to 150 kg M6x1 38 22 M10x1.5 45 68 97.7 Version ata sheet n Standard 034 ock out ock in ock out and in ouble extension isconnect M6x1 M10x1.5 6.9 1 44.7 0.9 scale 0.75 Standard closed lengths: E1014 Closed length (mm) 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 750 825 900 975 1050 1125 1200 1275 1350 1500 1650 1800 1950 2100 2250 2400 2550 2700 2850 3000 oad per pair (kg) 350 375 400 425 450 475 500 475 450 400 375 350 325 300 275 250 225 200 175 150 rilling scheme < 650 < 650 3 CA on www.chambrelan.com 100 (100) 26 32 32 26 650 26 100 200 200 200 (100) 32 32 26 46 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
TEESCOPIC SIE 11.2 Over extension 17 M10x1.5 E1024 STEE 750 to 2000 mm oad: 750 to 220 kg Protection: Version ata sheet n Standard 035 ock out ock in ock out and in ouble extension isconnect Partial extension slides 68 45 60 98 136 Total extension slides 8 1 2 57 Standard closed lengths: E1024 Closed length (mm) 750 800 850 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 Extension (mm) 1125 1200 1275 1350 1500 1650 1800 1950 2100 2250 2400 2550 2700 2850 3000 oad per pair (kg) 700 750 710 670 590 550 510 480 430 390 350 315 280 250 220 Over extension slides rilling scheme 3 CA on www.chambrelan.com 26 100 200 200 200 (100) 32 32 26 inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 47
TEESCOPIC SIE Over extension ST658 STAINESS STEE For steel model, see page 43 6 3 oad: 250 to 600 mm 47 to 30 kg Version ata sheet n 20 M4x0.7 ø 5.5 csk 90 ø 10.4 35 64 Standard 070 ock out 170 ock in 270 ock out and in 370 ouble extension isconnect Unsuitable for a mounting on the minor axis 0.5 1.5 3.5 15.5 Standard closed lengths: ST658 Closed length (mm) 250 300 350 400 450 500 550 600 Extension (mm) 375 450 525 600 675 750 825 900 oad per pair (kg) 47 45 42 40 37 35 32 30 rilling scheme 3 CA on www.chambrelan.com 13 50 50 50 50 (50) 7.5 (7.5) Advice REINFORCE SIES For slides used in extreme conditions or with heavy loads, CHAMBREAN proposes a range of reinforced slides. Reinforcement ball bearings reduce the twisting of the beams experienced in heavy load conditions. This type of product is highly recommended for mounting where the slide undergoes a torque or for mounting on the minor axis. 48 Catalogue 106 Tél.: + 33 (0)2 35 24 62 80 Fax : + 33 (0)2 35 25 02 00 Email : info@chambrelan.com
Chambrelan linear rails by 5 points: Partial extension slides The product: a rail and carriers On the website, you can find our product, including 3, in every standard CA format. 3 - CA on www.chambrelan.com Our linear rails consist of a recirculating ball bearing carrier that slides within a fixed length of guidance rail. One or more carriers may be used within each length of rail. Carriers are adapted to the rail (general manufacturing tolerances are around 1/10th of millimetre). Heavy duty rail Total extension slides Thanks to 15 differents models and 2 lengths of carriers, CHAMBREAN offers you a wide range for a movement with ease. oad capacities from 5 to 600 kg / carrier. A minimum maintenance CHAMBREAN slides have been designed to function with a minimum maintenance. Slides are lubricated in house with a grease for an optimum lifespan. In case of aggressive conditions of use (corrosive environment, intensive use...) we advise a regular and systematic maintenance of the slide. inear rails The linear rail is made from a cold drawn steel profile (some small dimension rails are in aluminium). This manufacturing process causes a work hardening of the material. This increases the wear resistance qualities of our steel. Easy to integrate The maximum lengths for a single piece of rail is 3 meter but should you require longer runs the rail can be supplied ready prepared for end to end connection. te: The normal method of fixation is by the use of countersunk screws. However, the rails are supplied undrilled as standard with fixing holes supplied only upon specific request. Each carrier has two drilled and tapped threads allowing fixing the sliding carrier. te: The diameter and position of fixing holes can not be modified on the carrier. PROUCTION ON REQUEST: The engineering department can provide you with personalised advice for the selection of the right slide for your application. On request, CHAMBREAN can supply: surface treatment (refer to the page 7) optional fixing methods fixing holes Over extension slides inear rails Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 49
Technical specifications / Mounting rules OA CAPACITY The load capacity quoted for each type of carrier is the maximum load for a single carrier mounted in its major axis. The loadings quoted are calculated with a large safety margin but the details of each application and use should also be considered to determine the final product selection. Fast cycle times and aggressive environments will reduce the maximum loads for each carrier. Mounting rail and carriers in their minor axis will also reduce the maximum safe loads. MOUNTING GUIEINES AN CONITIONS OF USE inear rails with recirculating ball bearing carriers are simple and robust products that will give you smooth and reliable travel. te: Mounting on an uneven surface or exposure to excessive heat, dirt or corrosive environments will cause wear within the ball tracks and reduce the lifespan of the slides. Contact us to select the rail best suited for your specific application. MOUNTING ON THE MAJOR AXIS / MOUNTING ON THE MINOR AXIS Mounting on the major axis is the ideal slide mounting. Ensuring mounting on the major axis will guarantee a better distribution of effort. With a mounting on the minor axis, the load capacity will be reduced (refer to the following pages). TRAVE The usual travel of the carrier is equal to the rail length minus a carrier length and the stop measurement, i.e. approximately 10 mm at each end. SPEE OF USE The maximum speed of use for Chambrelan telescopic rail is 0.5 m/s. EN STOP FOR TRANSPORTATION The products are delivered with transport end stops meant to prevent the carrier from coming out of its rail. They cannot be used as a permanent end stop extension. It is very important to allow the carriers to stop. The carrier is assembled by fixing together an upper and lower component. These components are held together by two threaded inserts. It is imperative that the end stops on the rail are equal or greater in height than the carrier itself. o not attempt to remove the carriers from the rails. Each carrier is fitted with ball bearings to suit the specific dimensions of its rail. The ball bearings are not trapped within the carriers and should they come free it would not be possible to ensure a factory fit when re-assembled by hand. 50 106 Catalogue Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com
ength: oad on a major axis: Rail: Carrier: ata sheet n 088 ø 4.2 csk 90 ø 8.5 M5x0.8 28 19.8 9 11.2 Rail E28 Carriers G40 G41 oad/carrier (kg) Major axis 20 15 Minor axis 10 8 A (mm) 70 45 B (mm) 60 35 rilling of the rail only on request Advice E28 STEE with carriers G40 or G41 on request 15 or 20 kg / carrier Nitruration ø 5.2 csk 90 ø 10.5 34 15 17 M6x1 22.8 Rail E53 Carriers G53 G57 oad/carrier (kg) Major axis 60 50 Minor axis 30 25 A (mm) 120 80 B (mm) 100 66 THE RUES FOR A GOO MOUNTING ARE: The whole rail assembly should be mounted on the major axis. The rail should be mounted on a flat and level surface. The load should be uniformly distributed. ength: oad on a major axis: Rail: Carrier: ata sheet n 089 E53 STEE with carriers G53 or G57 on request 50 or 60 kg / carrier Nitruration ength: oad on a major axis: Rail: Carrier: ata sheet n 086 ø 6.2 csk 90 ø 12.5 45 E72 STEE with carriers G70 or G72 on request 120 or 160 kg / carrier Nitruration 19 20.9 M8x1.25 29.8 Rail E72 Carriers G70 G72 oad/carrier (kg) Major axis 160 120 Minor axis 80 60 A (mm) 120 80 B (mm) 100 60 3 CA on www.chambrelan.com inear rails Over extension slides Total extension slides Partial extension slides Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 51
E46 STEE with carriers G52 or G54 E50 STEE with carriers G52 or G54 ength: oad on a major axis: Rail: Carrier: ata sheet n 083 on request 150 or 250 kg / carrier Nitruration ength: on request oad on a major axis: 100 or 150 kg / carrier Rail: Carrier: Nitruration ata sheet n 082 ø 6.2 csk 90 ø 12.5 56 M8x1.25 38 ø5.2 csk 90 ø10.5 M8x1.25 54 38 18 22.2 16.5 19.8 Rail E46 Carriers G52 G54 Major axis 150 250 oad/carrier (kg)) Minor axis 75 125 A (mm) 100 150 B (mm) 80 130 Rail E50 Carriers G52 G54 oad/carrier (kg) Major axis 100 150 Minor axis 50 75 A (mm) 100 150 B (mm) 80 130 rilling of the rail only on request A B A B 5 5 2 end stops for transportation only Example 10 3 CA on www.chambrelan.com FUNICUAR OOR MOUNTE ON INEAR RAI Each door of a few hundred kilos can be moved with ease. 10 52 Catalogue 106 Tél.: + 33 (0)2 35 24 62 80 Fax : + 33 (0)2 35 25 02 00 Email : info@chambrelan.com
rilling of the rail only on request Advice E48 STEE ength: oad on a major axis: Rail: Carrier: ata sheet n 085 on request 80 or 120 kg / carrier Nitruration ø6.2 csk 90 ø12.5 M6x1 48 36.3 5 12.5 14.5 Rail E48 Carriers G60 G67 oad/carrier (kg) Major axis 120 80 Minor axis 70 40 A (mm) 120 70 B (mm) 100 50 10 CHAMBREAN slides and linear rails are submitted to a strict production control. A B 2 end stops for transportation only with carriers G60 or G67 E47 STEE ength: oad on a major axis: Rail: Carrier: ata sheet n 084 3 CA on www.chambrelan.com MANUFACTURING TOERANCES Manufacturing tolerances are: on request 60 or 80 kg / carrier Nitruration ø4.2 M6x1 47.5 36.3 15.5 17.1 Rail E47 Carriers G60 G67 oad/carrier (kg) Major axis 80 60 Minor axis 40 30 A (mm) 120 70 B (mm) 100 50 A B with carriers G60 or G67 rilling: js 13 ength: js 13 Straightness: 1 mm / m Twisting effect: 10 5 1 / m inear rails Over extension slides Total extension slides Partial extension slides Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 53
E98 STEE with carrier G12 ø8.2 csk 90 ø16.5 ength: oad on a major axis: Rail: Carrier: on request 600 kg / carrier Nitruration M12x1.75 97,7 45 72,7 ata sheet n 087 Rail E98 Carrier G12 Major axis 600 oad/carrier (kg) Minor axis 400 23 3 CA on www.chambrelan.com 32,2 rilling of the rail only on request 250 220 5 5 2 end stops for transport only 45 Information 10 10 Generally speaking, you have the choice between: ong carriers for the heaviest loads. BA CARRIERS Short carriers for the lightest loads or upright uses. Two carriers are usually enough to support the load. You may always add another one if you wish to ensure a better support of the load (in case of flexible structures). 54 Catalogue 106 Tél.: + 33 (0)2 35 24 62 80 Fax : + 33 (0)2 35 25 02 00 Email : info@chambrelan.com
409 AUMINIUM technical evolution rilling of the rail only on request 5.7 Advice ength: oad on a major axis: Rail: Carrier: ata sheet n 91 on request 5 kg / carrier clear anodization hard anodization ø4.9 csk 90 ø8.5 M4x0.7 30 22 8.5 9.5 Rail 409 Carrier A26 Major axis 5 oad/carrier (kg) Minor axis 2 10 408 AU ength: oad on a major axis: Rail: Carrier: ata sheet n 92 on request 20 kg / carrier clear anodization hard anodization TO OBTAIN COMPETE SATISFACTION FROM CHAMBREAN INEAR RAIS, CONSUT US WHEN: Mounting on a non flat surface. Corrosive environment. with carrier A26 2 pressed out stops for transportation only 3 CA on www.chambrelan.com Off-set loads. technical evolution ø5.5 csk 90 ø10.5 M5x0.8 48 with carrier A66 Excessive heat (> 100 C). If improperly mounted, the sliding action will be erratic and the lifespan will be reduced. Contact us to select the slide best suited for your specific application. 14 16 Rail 408 Carrier A66 oad/carrier (kg) 120 100 Major axis 20 Minor axis 5 39 10 inear rails Over extension slides Total extension slides Partial extension slides Tel.: + 33 (0)2 35 24 62 80 Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com 106 Catalogue 55
ST45 STAINESS STEE with carriers GS55 or GS56 ength: oad on a major axis: Rail: Carrier: ata sheet n 095 on request 60 or 100 kg / carrier stainless steel stainless steel Example FIRE OOR MOUNTE ON INEAR RAIS COMPOSE OF RE-CIRCUATING BA CARRIERS Used to provide easy access to secure areas. Fire doors, armoured doors for cash in transit vehicles, engine housings. ø5.2 csk 90 ø10.6 M6x1 51.7 37,3 The linear rail is the optimum solution for this type of application: with load capacities from 100 to 150 kgs per ball carrier, the heavy door will be moved with ease on two E50 rails, each equipped with two G52 carriers (see page 52). This system offers a smooth and reliable movement with easy fitting. 12.7 15.2 Rail ST45 Carriers GS56 GS55 oad/carrier (kg) Major axis 100 60 Minor axis 60 30 A (mm) 120 80 B (mm) 100 60 rilling of the rail only on request A B A B 5 5 2 end stops for transportation only 10 3 CA on www.chambrelan.com 10 56 Catalogue 106 Tél. : + 33 (0)2 35 24 62 80 Fax : + 33 (0)2 35 25 02 00 Email : info@chambrelan.com
QUOTATION REQUEST Please send a copy by mail or fax. CHAMBREAN 68 boulevard Jules urand - BP 995 76061 E HAVRE Cedex - FRANCE Tel.: + 33 (0)2 35 24 62 80 - Fax: + 33 (0)2 35 25 02 00 Email: info@chambrelan.com How did you hear about us?....................................................................................................................................... FROM : Company................................................................................................. Address.......................................................................................................................................................................................................... Contact:.............................................. ept:................................................ Tel:...................... Fax:...................... Email:............................................... 1 2 7 - ouble extension (two-way-movement): Yes................................................................ NB: ouble extension is not compatible with any locking mechanism. 8 - Required options:...................................................................... Chosen reference:.............................. 3............................................................................................................................ Quantity........................... / slide (unit) 9 - Conditions of use: 1 - (refer to 1).................... mm 2 - Extension: (refer to 2)....................... mm Partial.................................. Total.................................. Over extension............................. Specific................................ mm 3 - oad: (refer to 3)........................ kg/pair 4 - Slides mounted: on the major axis............. on the minor axis.............. 5 - Material: Anodised aluminium......................... steel........................... Stainless steel............................. 6 - ocking mechanism: In open position............................ In closed position........................... In open and closed position................... Manual.................................. Mechanic/Automatic........................ Frequency:........................... Per hour Speed:.......................... Metre/second Environment: * amp................................ * ust................................. * Sand................................. * Heat................................. Other (please precise)........................ 10 - Application.................................................................................................................. 11 - Any other request:............................................................................................................. NOTE : Quotation request also available on www.chambrelan.com
Telescopic slides - Standard or customised. - In steel, aluminium or stainless steel for industrial applications. - Partial, total or over extension. inear ball rails - Rail in cold drawn steel, aluminium or stainless steel. - 15 carrier models. - oad capacity from 5 to 600 kg. Technical support - Helper tools to choose the right product. - data sheet in every CA drawing on www.chambrelan.com 3 CA on www.chambrelan.com Chambrelan SAS has copyright on this document. It may not be copied or reproduced in whole or in part for any purpose without prior written permission. 68 Boulevard Jules urand - B.P. 995-76061 E HAVRE Cedex - FRANCE Tel. : + 33 (0)2 35 24 62 80 - Fax : + 33 (0)2 35 25 02 00 - Email : info@chambrelan.com SAS au capital de 1.300.000 - SIRET : 356 501 049 00023 - APE : 273 A ATS communication - 02 32 35 83 00-2462 - juillet 07