Workspace and storage furnishings

Transcription

1 LISTA Compact Workspace and storage furnishings

2 NC storage and transport systems PROFSSIONALS AT WORK NC storage and transport systems made by LISTA give you the perfect solution for your tool logistics. Our NC modules not only provide professional storage in inserts specially optimised for your machining and cutting tools, but also a safe method of transporting them. Tools are stored in a space-saving and organised way and are always within reach and ready for use. That s not all: our NC modules can be individually equipped and can of course be freely combined with the entire LISTA system in order to make the best possible use of the valuable space in your production facility. Safe, neat and orderly storage in high-quality inserts made from break-proof, impact-proof and oil-resistant ABS material tailored to hold your cutting tools Optimum use of space because these high-capacity systems are not only space-saving, but the tools are just where you need them right next to the machine Customised and easy to assemble using tool s with snap fasteners for tool-free insertion and removal Secure transport thanks to robust and stable design User-friendly and ergonomic because tool s can be fitted at an angle and shelves and drawers can be pulled out Benefits of the LISTA drawer cabinets see p. 14/15 ALWAYS WITH LISTA 66 Free choice of colours standard colours, all other colours available; see p. 10 Intelligent locking systems replaceable cylinders for adapting to existing locking systems, electronic numeric and remote locking systems for absolute security made to measure; see p. 11 Individual configuration options in terms of size, equipment, locking system, colour and drawer partitions; see p. Fully combinable with the entire LISTA range thanks to standard measurement unit; see p. 13

3 Partitioning for NC tool containers The capacity of each of the different storage and transport units for NC tools is given in the table below. The partitioning scheme for each type of tool is given next to the corresponding article number. With this scheme you can use the table to calculate the maximum capacity for each storage and transport unit used. Insert frames in drawers and NC transport units Units () Dimensions (W x D) A B D F G H 36 x 27 * 6 x x x x 36 * 6 x * also for NC transport units NC storage in vertical pull-outs Drawer storage walls and vertical pull-out cabinets see p. 50 and 132 Tool cradles for NC cabinets and NC transport units suitable for () Dimensions (W x D) A B D F G H 36 * 562 x ** 946 x NC bench stand With insert frame for 3 strips. * for NC transport units, ** for NC cabinets NC storage in transport units Units () Dimensions (W x D) A B D F G H 36 x x 413 x Version with pair of frame supports LISTA frame supports for NC systems have adjustable ranges with three positions so that the height can be variably adjusted to match the items stored. The distance from the insert frame to the top of the tool is always. NC storage in bench stand For storage heights (27 and 36 ) For storage heights (27 and 36 ) For storage heights (27 and 36 ) NC storage in drawers Drawer cabinets with hinged or sliding doors see p. 40 Version with tool cradles LISTA tool cradles for NC systems are available in two heights The distance from the cradle to the top of the tool is always. For storage heights 96/135 (27 and 36 ) NC storage in cabinets

4 NC storage and transport systems I NC tool s NC tool system With this system a number of versions are available for different tools and can be fitted in a support in any combination. The s are screwed together or fixed by means of snap fastener. : high-quality plastic. Colour: red. Partitioning ISO-SK tool s Height Cone ø top Number of tools per Partitioning ISO-SK 30 65, ,8 1 B ISO-SK 40 65,6 60,5 44,5 1 B ISO-SK ,2 1 F ISO-SK ,9 1 F HSK tool s HSK 32 A+C+/40 B+D+F A HSK 40 A+C+/50 B+D+F A HSK 50 A+C+/63 B+D+F 65, B HSK 63 87, HSK 80 A+C+/100 B+D+F F HSK 100 A+C+/5 B+D+F G VDI tool s VDI 20 cylindrical* VDI 25 cylindrical* VDI 30 cylindrical VDI 40 cylindrical/mk5 VDI 50 cylindrical VDI 60 cylindrical Capto tool s Height Cone ø top Height Cylindrical hole ø Number of tools per Partitioning Tool s for HSC hollow shaft cylinders are available on request. Number of tools per Partitioning ,5 1 A ,4 1 A ,6 69,5 30,5 1 B ,5 77,5 40, ,5 93,5 50, ,5 60,5 1 F Height Cone ø top Number of tools per *Screwed, see tool s to drill out yourself. Partitioning Capto C , A Capto C , A Capto C5 65,6 31, B Capto C6 87, Capto C F Capto C G Tool s to drill out yourself For any tools. for you to drill out 58* for you to drill out 535* Depth Height Number of tools per as you like as you like * xplanation of screwed : screwed tool s are screwed onto the insert frame 68 or the tool cradle frame with 1 or 2 Allen screws *Screwed.

5 NC drawer storage for tool s Insert frame and pairs of frame supports Available as a set or as individual components. One pair of frame supports is needed for each insert frame. By having frame supports in different heights which can be screwed onto the perforated drawer base together with the insert frame, tools with different cone lengths can be stored in drawers. Adjustable ranges Partitioning i Ordering information Always take into account the maximum storage height of the tools including any fitting pins. Insert frame for drawers To accoodate all types of tool. One pair of frame supports is needed for each insert frame. Including screw fasteners. Without pair of frame supports. : steel sheet. Colour: grey, NCS S 4502-B. For drawer sizes Unit () Number of rows Depth Height 36 x x x Pair of frame supports for insert frame The position of the insert frames can be adjusted for height. Not necessary for tools with a height of less than 64. Including screw fasteners. : steel sheet. Colour: grey, NCS S 4502-B. For depth () Height Cone length / For insert frames , / For insert frames Tool sets 36 x 27 For inserting into drawers. Includes 1 insert frame, 1 pair of frame supports , depth 447, height quipped with Partitioning 24 s ISO-SK s ISO-SK s HSK 50 A+C+/63 B+D+F 18 s HSK 63 B F B Tool sets 36 x 36 For inserting into drawers. Includes 1 insert frame, 1 pair of frame supports , depth 596, height quipped with Partitioning 32 s ISO-SK s ISO-SK s HSK 50 A+C+/63 B+D+F 24 s HSK 63 B F B For colour information see fold-out page. When ordering, please use the desired three-digit colour code (instead of XXX). 69

6 NC storage and transport systems I preconfigured to 200 to 00 NC cabinets with roller shutters W D H to suit size 54 x x 459 Holder type Partitioning 4 Drawers (front height 75, load capacity 200 kg), 4 Insert frames including pair of frame supports, , including single-drawer opening system 156 s ISO-SK s ISO-SK s HSK XXX B F XXX XXX XXX Fully extendable drawers n load capacity 200 kg n perfectly smooth running through differential pull-out without a crossbar n details see p Tool cradle 8 Pair of frame supports, at an angle of 15, s ISO-SK s ISO-SK XXX B XXX F XXX 80 s HSK XXX 4 Tool cradle, 2 Drawers (front heights 100 / 150, load capacity 200 kg), 1 Pull-out shelves (200 kg), including single-drawer opening system 56 s ISO-SK s ISO-SK s HSK 63 A+C/80 B+D XXX B XXX F XXX XXX Insert frames and pairs of frame supports n insert frames can be used in cabinets, drawers and transport units n tool cradles horizontal or at a slight incline, can easily be attached to vertical pull-outs, table stands, transport units and cabinets without screws n for quick and safe access Partitioning

7 to 540 to 800 NC transport unit W 1077 D 514 H 1 x rack on the front, including PVC ribbed mat, 1 x insert frame with pair of frame supports, 2 x tool cradle with pair of frame supports, sloping wheel diameter Ø 160, rubber castors, load capacity 540 kg W 1080 D 692 H 1 x insert frame with pair of frame supports, 2 x tool cradle with pair of frame supports, sloping, 2 x adjustable shelves including PVC ribbed mat wheel diameter Ø 200, rubber castors, load capacity 800 kg 932 Holder type to suit size 36 x 27 Partitioning XXX 40 s ISO-SK 40 B XXX 25 s ISO-SK 50 F XXX 30 s HSK XXX 975 Holder type to suit size 36 x 36 Partitioning XXX 48 s ISO-SK 40 B XXX 30 s ISO-SK 50 F XXX 36 s HSK XXX NC bench stand W D 413 H 345 to suit size 36 x 27 Holder type Partitioning With screwed in insert frame for 3 strips. : steel sheet. Colour: grey, NCS S 4502-B. Side elements: as per colour chart XXX 24 s ISO-SK 40 B XXX 15 s ISO-SK 50 F XXX 18 s HSK XXX For colour information see fold-out page. When ordering, please use the desired three-digit colour code (instead of XXX). Partitioning 71

8