ELENCO PROVE ACCREDITATE - CATEGORIA: 0



Similar documents
ELENCO PROVE ACCREDITATE - CATEGORIA: 0

ELENCO PROVE ACCREDITATE - CATEGORIA: 0

Design qualification and type approval of PV modules acc. to IEC 61215:2005 / IEC 61646:2008

Design qualification and type approval of PV modules

PV module safety qualification according to IEC 61730:2004 EN 61730:2007

INTERNATIONAL STANDARD

Introduction of PV related business of Japan Electrical Safety & Environment Technology Laboratories (JET)

INTERNATIONAL STANDARD

SFxxx-S PID Test Report (Potential Induced Degradation) TUV Rheinland Japan. ARC Product Management Ver. 1

Basic Understanding of IEC Standard Testing For Photovoltaic Panels

Explosion proof enclosures

ENVIRONMENTAL TESTING

Ex q Powder Filling. This is a technique primarily used for oil filled switch-gear. The spark is formed under oil and venting is controlled.

Hazardous Locations Training

For the modifications listed below, the Qualification Approval tests in IEC and IEC 61646, shall be used as a guideline by the assessor:

David O Brien, CMP Products (David.OBrien@cmp-products.com)

Electrical Equipment in Hazardous Areas: Field Inspections

ELENCO PROVE ACCREDITATE - CATEGORIA: 0

distributing & controlling system solutions

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket

ZS6-S Screw Clamp Terminal Blocks Disconnect with blade

ZS25 Screw Clamp Terminal Blocks Feed-through

ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket

SHARP SOLAR Frequently Asked Questions for PV Integrators Revised 05/04/2010

CLASSIFICATION NOTES

Safety instructions VEGADIS DIS81.CEIA/V****

Solar energy Solar technology in endurance testing

FAQs-Main switchboard design criteria

Comparative study for cables and busbars

What are the basic electrical safety issues and remedies in solar photovoltaic installations?

SOLAR ELECTRIC MODULE ES-124 & ES-62T Owners Manual and Installation Guide

3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & Instructions For Installation, Operation & Maintenance

ENVIRONMENTAL TESTING SERVICES. Product and component performance verification

ERRATA CORRIGE 1. NORMA EN CEI UNI EN ISO/IEC : (CEI 31-96) Edizione: (fasc E)

ALTERNATIVE METHODS FOR INTERNAL ARC TESTS ON 12 KV AND 24 KV METAL-ENCLOSED SWITCHGEARS WITH COMPACT RMU

Safety instructions VEGAPULS PS62/63/66/67/68.GI/RI(*)****** IECEx BVS Ex t IIIC T Da, Da/Db, Db IP 66

Long-term performance of photovoltaic modules Artur Skoczek

12 SOLAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS by John Ware. PV modules are current-limiting

MT MOTORI ELETTRICI. Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D

Securing your electrical installations Prisma,

POINT OBSTRUCTION LIGHTS SOL LED SOLAR POWERED RED OBSTRUCTION SYSTEM

Instructions for Safe Use

Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx

Design, testing, certification, installation & maintenance

EX-TECH SAS CP/PB 150 EXPLOSIONPROOF MANUAL CALL POINT/ PUSH BOTTON TECHNICAL MANUAL

Introduction for Photovoltaic Power System Test in China. Zou Xinjing Institute of Electrical Engineering Chinese Academy of Sciences Nov.

ARCO Electric Products Installation and Maintenance Manual Low Voltage Automatic Power Factor Correction Capacitor Systems 2013

RAPPORTO DI PROVA TEST REPORT

HAZARDOUS AREA TECHNICAL GUIDE

Safe Operating Procedure

METAL-CLAD AND METAL-ENCLOSED SWITCHGEAR 3.6KV~40.5KV. tgood.com. Energy. Fast.

Technical application guide IP codes in accordance with IEC 60529

The role of manufacturer s in the quality of PV products

CSUN Crystalline Silicon PV Module Products Installation Manual (IEC Version)

INTERNATIONAL STANDARD

GENERAL INSTALLATION MANUAL FOR EGING PV MODULES

Technical Data. General specifications Switching element function Rated operating distance s n 5 mm

White Paper IK code: Impact protection in line with the IEC standard. By Sven Schnautz

Safety instructions VEGAFLEX FX8*(*).FC/ O****A/H*****

Technicaldata General

Annex of the certificate (Page 1/6) Accreditation Scope

Fire Alarm System Accessories

DNVGL-CP-0393 Edition December 2015

Cable Trays and Ducts (Metallic)

5/3/2010. Article 500 address the requirements for hazardous locations: Wiring Equipment

New Cable Tie Type Classifications

8146/5 Series Breaker Panelboards

Installation and safety instructions for AC/DC built-in devices

ENERGY. TECSUN DUO (PV) Twin Cables for Photovoltaics

CONSULTING Training Courses

The easy way to build switchgear and controlgear assemblies in compliance with the regulations

Hazardous location. Definitions

Unified requirements for systems with voltages above 1 kv up to 15 kv

Explosion Protected Electrical Apparatus in the Russian Federation


(PREVIEW) Indian Standard COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS


Installation Guide of Sunrise Solartech PV Modules. Term Contents. Purpose of this guide. General. Safety precaution for installing a solar

LV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE

Industrial Process Plants. Residential & Commercial Buildings. Roads & Tunnels. Airports & Seaports

INTERNATIONAL STANDARD

INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS FOR EXHEAT INDUSTRIAL IMMERSION HEATERS (INCLUDING FLAMEPROOF)

Solar Cell Bypass Diodes in Silicon Crystalline Photovoltaic Panels

Integration of a 400W ac dc power supply into a closed system relying only on natural convection cooling

COMPARISON OF ANSI/IEEE AND IEC REQUIREMENTS FOR LOW- VOLTAGE SWITCHGEAR

How To Protect An Explosion

Course Title: Safety Issues in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type

Your Sharp system will be supplied with one of the following sets of panels:

O&M Service for Megasolar Power Plants and Precise Monitoring Techniques for PV Modules

THERMAL ENERGY METER MC 108/ET

Session 12 Ex Protection Concepts

High Surge Axial Cemented Wirewound Resistors

ISO/IEC Environmental Test Laboratory

LEAD CRYSTAL. User Manual. Valve-regulated lead-crystal batteries Energy storage Cells

IP Rating Chart. 910 East Orangefair Lane Anaheim, CA USA , Fax

Type: DILM115(RAC240) Article No.: Sales text Contactor,55kW/400V,AC operated. Ordering information

Technical Data. General specifications Switching element function Rated operating distance s n 5 mm

IR WINDOW CERTIFICATION GUIDEBOOK. Copyright CorDEX Instruments Ltd. ex.com. ID 4016 Rev A

Rosemount 5300 and 5400 Series Terminal Compartment Spare Part Instruction

SURGE PROTECTIVE DEVICES

Transcription:

Scheda 1 di 7 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Crystalline silicon terrestrial photovoltaic (PV) modules 10.1 Ispezione visiva/visual inspection IEC 61215:2005 10.1 10.10 Prova di precondizionamento UV/ UV preconditioning IEC 61215:2005 10.10 10.11 Prova dei cicli termici / Thermal cycling test IEC 61215:2005 10.11 10.12 Prova di umidità e congelamento / Humidity freeze test IEC 61215:2005 10.12 10.13 Prova al caldo umido / Damp heat test IEC 61215:2005 10.13 + IEC 60068-2-78:2012 10.14 Prova di robustezza delle terminazioni / Robustness of termination test IEC 61215:2005 10.14 + IEC 60068-2-21:2006 10.15 Prova di dispersione di corrente in ambiente umido / Wet leakage current test IEC 61215:2005 10.15 10.16 Prova di carico meccanico / Mechanical load test IEC 61215:2005 10.16 10.17 Prova di grandine / Hail test IEC 61215:2005 10.17 10.18 Prova termica dei diodi di bypass / Bypass diode thermal test IEC 61215:2005 10.18 10.2 Potenza massima / Maximum power determination IEC 61215:2005 10.2 + IEC 60904-1:2006+IEC 60891:2009 10.3 Prova di isolamento / Insulation test IEC 61215:2005 10.3+ CEI EN 60068-1:2013 IEC 61215:2005 10.4 + IEC + IEC 60891:2009 + CEI IEC 60904-1:2006 10.5 Misura della NOCT / Measurement of NOCT IEC 61215:2005 10.5 10.6 Prestazioni al STC e alla NOCT / Performance at STC and NOCT IEC 61215:2005 10.6 + IEC 60904-3:2008+IEC 10.7 Prestazioni a basso irraggiamento / Performance at low irradiance IEC 61215:2005 10.7 + IEC 60904-1:2006 + IEC 10.8 Prova di esposizione in esterno / Outdoor exposure test IEC 61215:2005 10.8 + IEC 60721-2-1:2013 10.9 Prova di resistenza ai surriscaldamenti localizzati / Hot-spot endurance test Degrees of protection provided by enclosures (IP Code) 12 Tests for protection against access to hazardous parts indicated by the first characteristic numeral 13 Tests for protection against solid foreign objects indicated by the first characteristic numeral 14 Tests for protection against water indicated by the second characteristic numeral (Only IPX3, IPX4, IPX5,IPX6,IPX7, IPX8 and IPX9) 15 Tests for protection against access to hazardous parts indicated by the additional letter IEC 61215:2005 10.9 IEC 60529:1989/A2: 2013 IEC 60529: 1989/A2: 2013 IEC 60529: 1989/A2: 2013 IEC 60529: 1989/A2: 2013 IP6X-IP5X on huge size enclosure M.I. 24: 02/04/2013 + IEC 60529:1989/A2: 2013 Degrees of protection provided by enclosures for electrical eqipment against external mechanical impacts (IK Code) 6 Test to verify the protection against mechanical impacts IEC 62262:2002 Enviromental testing Part 2: Tests - Test Eh: Hammer tests 4 Test EHA: Pendulum hammer IEC 60068-2-75:2014

Scheda 2 di 7 6 Test EHC: Vertical hammer IEC 60068-2-75:2014 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state Damp heat, steady state IEC 60068-2-78:2012 Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium, chloride solution) Test Kb: Salt mist, cyclic IEC 60068-2-52:1996 Environmental testing - Part 2: Tests. Test Ka: Salt mist Test Ka: Salt mist IEC 60068-2-11:1981 Explosive atmospheres Part 18: Equipment protection by encapsulation "m" 8.1.1 Water absorption test IEC 60079-18:2014 8.1.2 Dielectric strength test IEC 60079-18:2014 8.2.2 Maximum temperature IEC 60079-18:2014 8.2.3 Theramal endurance test IEC 60079-18:2014 8.2.4 Dielectric strength test IEC 60079-18:2014 8.2.5 Cable pull test IEC 60079-18:2014 8.2.6 Pressure test IEC 60079-18:2014 8.2.7 Test for resettable thermal protective device IEC 60079-18:2014 8.2.8 Sealing test for build-in protective devices IEC 60079-18:2014 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" 6.1.1 Type tests for dust exclusion by enclosures IEC 60079-31:2013 6.1.2 Thermal tests IEC 60079-31:2013 Explosive atmospheres - Part 0: Equipment -General requirements 26.12 Earth continuity IEC 60079-0:2011 26.13 Surface resistance test IEC 60079-0:2011 26.14 Measurement of capacitance IEC 60079-0:2011 26.15 Verification of ratings of ventilating fans IEC 60079-0:2011 26.16 Alternative qualification of elastomeric sealing O-rings IEC 60079-0:2011 26.3 Tests in explosive test mixtures IEC 60079-0:2011 26.4.2 Resistance to impact IEC 60079-0:2011 26.4.3 Drop test IEC 60079-0:2011 26.4.5 Degree of protection (IP) by enclosures IEC 60079-0:2011 26.5.1 Temperature measurement IEC 60079-0:2011 26.5.2 Thermal shock test IEC 60079-0:2011 26.5.3 Small component ignition test IEC 60079-0:2011 26.6 Torque test for bushings IEC 60079-0:2011 26.7.2 Test temperature IEC 60079-0:2011

Scheda 3 di 7 26.8 Thermal endurance to heat IEC 60079-0:2011 26.9 Thermal endurance to cold IEC 60079-0:2011 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" 15.2.2 Determination of explosion pressure (reference pressure) IEC 60079-1:2014 15.2.3 Overpressure tests IEC 60079-1:2014 15.3 Test of non-trasmission of internal ignition IEC 60079-1:2014 5 Flameproof joints IEC 60079-1:2014 C.3.4.1 Torque test for Ex thread adapters IEC 60079-1:2014 C.3.4.2 Impact test for Ex thread adapters IEC 60079-1:2014 C.3.4.3 Over-pressure test for Ex thread adapters IEC 60079-1:2014 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety i 10.1 Spark ignition test IEC 60079-11:2011 10.10 Transformer tests IEC 60079-11:2011 10.12 Current carrying capacity of infallible printed circuit board connections IEC 60079-11:2011 10.2 Temperature tests IEC 60079-11:2011 10.3 Dielectric strength tests IEC 60079-11:2011 10.5 Tests for cells and batteries IEC 60079-11:2011 10.6.1 Casting compound IEC 60079-11:2011 10.6.2 determination of the acceptability of fuses requiring encapsulation IEC 60079-11:2011 10.6.3 partitions IEC 60079-11:2011 10.8 Type tests for diode safety barriers and safety shunts IEC 60079-11:2011 10.9 Cable pull test IEC 60079-11:2011 Explosive atmospheres - Part 15: Equipment protection by type of protection "n" 22.11 Mechanical shock test for batteries IEC 60079-15:2010 22.12 Insulation resistance test for batteries IEC 60079-15:2010 22.3.1.1 Thermal endurance to heat IEC 60079-15:2010 22.3.1.2 Drop test for hand-held equipment IEC 60079-15:2010 22.5.1 Tests for sealed devices - Conditioning IEC 60079-15:2010 22.5.2 Tests for sealed devices- Voltage test IEC 60079-15:2010 22.6 Restricted breathing test IEC 60079-15:2010 6.4 Clearances, creepage, distances and separations IEC 60079-15:2010 6.5 Electric strength IEC 60079-15:2010 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" 16.1 Determination of Maximum overpressure rating IEC 60079-2:2014 16.2 Maximum overpressure test IEC 60079-2:2014 16.3 Leakage test IEC 60079-2:2014 16.4 Purging test IEC 60079-2:2014

Scheda 4 di 7 16.5 Purging and diluition tests for a pressurized enclosure with an internal source of release IEC 60079-2:2014 16.6 Verification of minimum overpressure IEC 60079-2:2014 16.7.1 Overpressure test IEC 60079-2:2014 16.8 Overpressure test for a containment system with a limited release IEC 60079-2:2014 Explosive atmospheres - Part 7: Equipment protection by increased safety "e" 6.1 Dielectric strength IEC 60079-7:2015 6.10 Terminal insulating material test IEC 60079-7:2015 6.6.2/6.7.2 Insulation resistance IEC 60079-7:2015 6.6.3/6.7.3 Batteries - mechanical shock test IEC 60079-7:2015 6.6.4/6.7.4 Ventilation for cells and battery of Level of Protection "eb"/"ec" IEC 60079-7:2015 6.8 General purpose connection and junction boxes IEC 60079-7:2015 6.9 Resistance heating equipments IEC 60079-7:2015 Flame arresters 6.7 Flow measurement (air) EN ISO 16852:2010 7.3.2.1 Deflagration test - End of-line flame arrester EN ISO 16852:2010 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic methods and requirements 8.2 Determination of the maximum surface temperature UNI EN 13463-1: 2009 8.4.1 Test for resistance to impact UNI EN 13463-1: 2009 8.4.2 Drop test UNI EN 13463-1: 2009 8.5.4 Thermal endurance to heat UNI EN 13463-1: 2009 8.5.5 Thermal endurance to cold UNI EN 13463-1: 2009 8.5.7 Mechanical resistance tests UNI EN 13463-1: 2009 8.5.8 Surface resistance test UNI EN 13463-1: 2009 8.5.9 Thermal shock test UNI EN 13463-1: 2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c" B.1 "Dry run" test for lubricated sealing arrangements UNI EN 13463-5 :2011 B.2 Type test for determining the maximum engaging time of clutch assembly UNI EN 13463-5 :2011 B.3 Conductivity criteria for trasmission belts UNI EN 13463-5 :2011 Photovoltaic (PV) modules 10.1 Ispezione visiva MST 1 / Visual inspection MST 1 IEC 61730-2:2004/A1:2011 10.1 + IEC 61215:2005 + IEC 61646:2008 + IEC 61730-1:2004/A2:2013 10.10 Prova di rottura del modulo MST 32 / Module breakage test MST 32 IEC 61730-2:2004/A1:2011 10.10 10.2 Prova di accessibilità MST 11/ Accessibility test MST 11 IEC 61730-2:2004/A1:2011 10.2 + CEI EN 61032:1998 10.3 Prova di suscettibilità al taglio MST 12 / Cut susceptibility test MST 12 IEC 61730-2:2004/A1:2011 10.3 10.4 Prova di continuità a terra MST13 / Ground continuity test MST 13 IEC 61730-2:2004/A1:2011 10.4 + IEC 61730-1:2004/A2:2013 10.5 Impulse voltage test MST14 IEC 61730-2/A1:2011 10.5

Scheda 5 di 7 10.6 Prova di resistenza dielettrica MST 16 / Dielectric withstand test MST 16 IEC 61730-2:2004/A1:2011 10.6 + CEI EN 60068-1:2013 + IEC 61215:2005 + IEC 61646:2008 10.7 Prova di temperatura MST 21 / Temperature test MST 21 IEC 61730-2:2004/A1:2011 10.7 10.9 Prova di corrente inversa MST 26/ Reverse current overload test MST 26 IEC 61730-2:2004/A1:2011 10.9 11.2 Conduit bending test MST 33 IEC 61730-2:2004/A1:2011 11.2 11.3 Terminal box knockout tests MST 44 IEC 61730-2:2004/A1:2011 11.3 Dark I-V measurement /R's measurement M.I. 01: 02/04/2013 + IEC 60891: 2009 (Method 2) + IEC 62108: 2007 10.2.4 Electroluminescence imaging test M.I. 03: 16/05/2012 Environmental testing Part 2: Test L: Dust and sand - Method Lc1: recirculating chamber Photovoltaic (PV) module safety qualification Prova di corrosione da nebbia salina/salt mist corrosion testing of photovoltaic (PV) modules EN 60068-2-68: 1996 IEC 61730-1:2004/A2:2013 IEC 61701: 2011 + IEC 60068-2-52:1996 + IEC 61215:2005 + IEC 61646:2008 + IEC 62108:2007 + IEC 61730-2:2004/A1:2011 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres 6.2.1 Determination of the maximum explosion pressure EN 1834-1:2000 6.2.2 Overpressure test EN 1834-1:2000 6.2.3 Non trasmission tests EN 1834-1:2000 Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 8 Test for first characteristic numeral IEC 60034-5:2006 9 Test for second characteristic numeral (Only IPX3, IPX4, IPX5, IPX6, IPX8 and IPX9) IEC 60034-5:2006 Solar energy Solar thermal collectors Test methods 10 Standard stagnation temperature of liquid heating collectors EN ISO 9806:2013 11 Exposure and pre-exposure test EN ISO 9806:2013 12 External thermal shock test EN ISO 9806:2013 13 Internal thermal shock test EN ISO 9806:2013 14 Rain penetration test EN ISO 9806:2013 15 Freeze resistance test EN ISO 9806:2013 16 Mechanical load test with positive or negative pressure EN ISO 9806:2013 17 Impact resistance test EN ISO 9806:2013 18 Final inspection EN ISO 9806:2013 20..28 Performance testing of fluid heating collectors EN ISO 9806:2013 6 Internal pressure tests for fluid channels EN ISO 9806:2013 9 High-temperature resistance test EN ISO 9806:2013 Thermal solar systems and components - Solar collectors - Part 1: General requirements General requirements UNI EN 12975-1:2011

Scheda 6 di 7 Thin-film terrestrial photovoltaic (PV) modules 10.1 Ispezione visiva / Visual inspection IEC 61646:2008 10.1 10.10 Prova di precondizionamento UV / UV preconditioning IEC 61646:2008 10.10 10.11 Prova dei cicli termici / Thermal cycling test IEC 61646:2008 10.11 10.12 Prova di umidità e congelamento / Humidity freeze test IEC 61646:2008 10.12 10.13 Prova al caldo umido / Damp heat test IEC 61646:2008 10.13 + IEC 60068-2-78:2012 10.14 Prova di robustezza delle terminazioni / Robustness of termination test IEC 61646:2008 10.14 + IEC 60068-2-21:2006 10.15 Prova di dispersione di corrente in ambiente umido / Wet leakage current test IEC 61646:2008 10.15 10.16 Prova di carico meccanico / Mechanical load test IEC 61646:2008 10.16 10.17 Prova di grandine / Hail test IEC 61646:2008 10.17 10.18 Prova termica dei diodi di bypass / Bypass diode thermal test IEC 61646:2008 10.18 10.19 Esposizione prolungata al sole / Light - soaking IEC 61646:2008 10.19 10.2 Potenza massima / Maximum power determination IEC 61646:2008 10.2 + IEC 60904-9:2007 + IEC 60904-1:2006 + IEC 60891:2009 10.3 Prova di isolamento/insulation test IEC 61646:2008 10.3+ CEI EN 60068-1:2013 IEC 61646:2008 10.4+ IEC 60904-1:2006 + IEC 60891:2009 + IEC 10.5 Misura della NOCT / Measurement of NOCT IEC 61646:2008 10.5 10.6 Prestazioni al STC e alla NOCT / Performance at STC and NOCT IEC 61646:2008 10.6 + IEC 60904-3:2008 + IEC 10.7 Prestazioni a basso irraggiamento / Performance at low irradiance IEC 61646:2008 10.7+ IEC 60904-1:2006 + IEC 10.8 Prova di esposizione in esterno / Outdoor exposure test IEC 61646:2008 10.8 + IEC 60721-2-1:2013 10.9 Prova di resistenza ai surriscaldamenti localizzati / Hot-spot endurance test IEC 61646:2008 10.9

Scheda 7 di 7 ELENCO PROVE ACCREDITATE - CATEGORIA: III Crystalline silicon terrestrial photovoltaic (PV) modules 10.1 Ispezione visiva / Visual inspection IEC 61215:2005 10.1 10.2 Determinazione della massima potenza / Maximum power determination IEC 61215:2005 10.2 + IEC 60904-1:2006+ IEC 60891:2009 10.3 Prova di isolamento / Insulation test IEC 61215:2005 10.3+ CEI EN 60068-1:1998 IEC 61215:2005 10.4 + IEC + IEC 60891:2009 + IEC 60904-1:2006 10.6 Prestazioni al STC e alla NOCT / Performance at STC and NOCT IEC 61215:2005 10.6 + IEC 60904-3:2008 + IEC 10.7 Prestazioni a basso irraggiamento / Performance at low irradiance IEC 61215:2005 10.7 + IEC 60904-1:2006 + IEC Thin-film terrestrial photovoltaic (PV) modules 10.1 Ispezione visiva / Visual inspection IEC 61646:2008 10.1 10.2 Determinazione della massima potenza / Maximum power determination IEC 61646:2008 10.2 + IEC 60904-1:2006 + IEC 60891:2009 10.3 Prova di isolamento / Insulation test IEC 61646:2008 10.3 + CEI EN 60068-1:1998 IEC 61646:2008 10.4 + IEC 60904-1:2006 + IEC 60891:2009 + IEC 10.6 Prestazioni al STC e alla NOCT / Performance at STC and NOCT IEC 61646:2008 10.6 + IEC 60904-3:2008 + IEC 10.7 Prestazioni a basso irraggiamento / Performance at low irradiance IEC 61646:2008 10.7+ IEC 60904-1:2006 + IEC Legenda IEC=International Electrotechnical Commission CEI=Comitato Elettrotecnico Italiano EN=European Norm ANSI=American National Standards Institute UL=Underwriters Laboratories ACCREDIA Il Direttore del Dipartimento (Dr.ssa Silvia Tramontin)

2026 © DocPlayer.net Privacy Policy | Terms of Service | Feedback  | Do Not Sell My Personal Information