Kennedylaan 14 5466 AA Veghel The Netherlands Tel.: +31 (0) 413 38 83 10 Fax: +31 (0) 413 38 83 11 Email: info@tce-tools.nl Web: www.tce-tools.nl This product catalogue has been made with the utmost care. Due to product innovations the contents of this catalogue is subject to change. For this reason the tce website is leading. You can download the most recent versions from www.tce-tools.nl/download Name Description page PL 3... Toolmakers square edge 10.3 PL 4... Toolmakers square edge 10.4 PM... Sliding knives 10.5 CS... Control squares 10.6 FH Knife straight edges 10.7 HL... Knife straight edges 10.8 WH... Toolmakers square edge 10.9 WKH... Edge squares 10.10 TCP SET... Control pins, 60-64 Hrc 10.11 TCPH... Holders for control pins 10.12 TTM... Technical magnifiers 10.13 TMG... tools 10.14 SL... Sliding calipers 10.15 SL... MMS... BMMS... Measurement tools 10.16 WL... Working lights 10.17 WEBSTER... Webster hardness tester, Model B 10.18 Newall... Digital readouts 10.19 10.1
PL 3... GRP I11 - FAM 282 Toolmakers square edge Gereeschapmakers winkelhaak Werkzeugmacher Haarwinkel Équerres de dressage coulissante Item. nr. Designation Specification Specification Fig. 19.11.1002 PL 3-SET Edge square with PM 530S 40 x 20 x 10mm 60 HRc 1 Onderdelen Spare parts Ersatzteile Des pièces de rechange 19.11.1004 PL 3-44 Edge holder 3mm 2 19.11.1005 PL 3-66 Edge holder 6mm 3 19.11.1007 PL 3-12 Prism stick 4 19.11.1009 PL 3-13 Spanner 5 19.11.1006 PL 3-14 Socket screw 6 19.11.1003 PL 3-10 Nut 7 19.11.1008 PL 3-15 Spring 8 19.11.1010 PL 3-55 Push on block 9 10.3
PL 4... GRP I11 - FAM 283 Toolmakers square edge Gereeschapmakers winkelhaak Werkzeugmacher Haarwinkel Équerres de dressage coulissante Item. nr. Designation Specification Specification Fig. 19.11.1012 PL 4-SET Edge square with PM 660 50 x 25 x 10mm 60 HRc 1 Onderdelen Spare parts Ersatzteile Des pièces de rechange 19.11.2099 PL 4-11 Nut 2 19.11.2100 PL 4-67 Edge holder 6mm 3 19.11.2101 PL 4-16 Washer 4 10.4
PM... GRP I11 - FAM 284 Sliding knives Schuifbaar mes Verschiebbare Linealen für Werkzeugmacher Haarwinkel Règle de dressage coulissante Item. nr. Designation Fig. Sq. L l 1 h1 l 2 h2 h3 19.11.1013 PM 312S 1 1,2 30 1 - - - - 19.11.1014 PM 512S 2 1,2 50 15 - - - - 19.11.1015 PM 515 3 1,5 50 - - - - - 19.11.1016 PM 715 4 1,5 70 - - - - - 19.11.1017 PM 530S 5 3 50 46 - - - - 19.11.1018 PM 630S 6 3 60 46 - - - - 19.11.1019 PM 630 7 3 60 - - - - - 19.11.1020 PM 1030S 8 3 100 46 - - - - 19.11.1021 PM 231 9 3 50 16 1 - - - 19.11.1022 PM 138S 10 3 60 52 0,8 8 - - 19.11.1023 PM 138 11 3 60 25 0,8 10 1,5-19.11.1024 PM 138L 12 3 100 25 1,5 - - - 19.11.1025 PM 138LS 13 3 100 25 0,8 10 1,5-19.11.1026 PM 660 14 6 80 - - - - - 19.11.1027 PM 369 15 6 90 5,5 1,5 25 2 4,5 19.11.1028 PM 370 16 6 110 18 2 19 2,5-19.11.1029 PM 1060 17 6 100 - - - - - 10.5
CS... GRP I11 - FAM 325 Control squares Controle hoek Kontrollwinkel Équerres de contrôle Item. nr. Designation Specification Fig. 19.11.1038 CS 9040 40 40 4mm 90 x 45 x 45 60 HRc Tol. ± 0,002mm 1 19.11.1039 CS 9060 60 60 10mm 90 x 45 x 45 60 HRc Tol. ± 0,002mm 2 19.11.3633 CS 5050 50-50 - 10mm 88 x 89 x 91 x 92 60 HRc Tol. ± 0,002mm 3 10.6
FH GRP I11 - FAM 324 Knife straight edges Haarlineaal Haarlinealen Règle de dressage Item. nr. Designation Specification Fig. 19.11.1037 FH 7180 40 30 20 15 12 8mm Tol. ± 0,002mm 1 19.11.1034 FH 7 0,5 x 10 x 40 x 95 x 2,1mm Tol. ± 0,002mm 2 19.11.1035 FH 8 0,5 x 20 x 40 x 95 x 2,1mm Tol. ± 0,002mm 3 10.7
HL... GRP I12 - FAM 326 Knife straight edges Haarlinialen Haarlinealen Éqeurres Item. nr. Designation L 19.12.1001 HL 610/050 50 19.12.1002 HL 610/075 75 19.12.1003 HL 610/100 100 19.12.1004 HL 610/125 125 19.12.1005 HL 610/150 150 19.12.1006 HL 610/200 200 19.12.1007 HL 610/250 250 19.12.1008 HL 610/300 300 19.12.1009 HL 610/400 400 19.12.1010 HL 610/500 500 Knife straight edges, according to DIN 874/00 Haarliniaal, volgens DIN 874/00 Haarlinealen, nach DIN 874/00 Éqeurres, selon DIN 874/00 10.8
WH... GRP I11 - FAM 327 Toolmakers square edge Schuifwinkelhaak Haarwinkel mit c=verschiebbarem Lineaal Équerres avec règle de dressage coulissante Item. nr. Designation Specification Specification Fig. 19.11.1051 WH 416-SET Sliding square with WH 416-20 Tol. ± 0,002mm 60 HRc 90 x 100mm 1 Onderdelen Spare parts Ersatzteile Des pièces de rechange 19.11.1052 WH 416-10 Edge 1,36 x 10 x 100mm 2 19.11.1053 WH 416-20 Edge 1,36 x 20 x 100mm 3 19.11.1054 WH 416-S Edge 1,36 x 10 x 100 (0,65 x 10) 4 19.11.1055 WH 416-U Holder 5 19.11.2102 WH 416-N Nut 6 19.11.2103 WH 416-W Washer 7 19.11.2104 WH 416-15 Spring 8 19.11.2113 WH 416-SET Z. KOFFER 10.9
WKH... GRP I12 - FAM 328 Edge squares Winkelhaken Haarwinkel Équerres Item. nr. Designation h b Fig. DIN 875/00 DIN 875/00 DIN 875/00 DIN 875/00 19.12.1012 WKH 1/025/00 25 20 1 19.12.1013 WKH 1/040/00 40 28 1 19.12.1016 WKH 2/050/00 50 40 2 19.12.1017 WKH 2/075/00 75 50 2 19.12.1018 WKH 2/100/00 100 70 2 19.12.1019 WKH 2/150/00 150 100 2 19.12.1020 WKH 2/200/00 200 130 2 19.12.1022 WKH 2/300/00 300 200 2 DIN 875/0 DIN 875/0 DIN 875/0 DIN 875/0 19.12.1023 WKH 3/050/0 50 40 3 19.12.1024 WKH 3/075/0 75 50 3 19.12.1025 WKH 3/100/0 100 70 3 19.12.1026 WKH 3/150/0 150 100 3 19.12.1027 WKH 3/200/0 200 130 3 19.12.1028 WKH 3/300/0 300 200 3 19.12.1029 WKH 4/100/0 100 70 4 19.12.1030 WKH 4/150/0 150 100 4 DIN 875/1 DIN 875/1 DIN 875/1 DIN 875/1 19.12.1073 WKH 3/075/1 75 50 3 19.12.1074 WKH 3/100/1 100 70 3 19.12.1075 WKH 3/150/1 150 100 3 19.12.1076 WKH 3/200/1 200 130 3 19.12.1077 WKH 3/250/1 250 165 3 19.12.1078 WKH 3/300/1 300 200 3 19.12.1079 WKH 3/400/1 400 265 3 19.12.1080 WKH 3/500/1 500 330 3 Edge squares, according to DIN 875 Winkelhaken, volgens DIN 875 Haarwinkel, nach DIN 875 Équerres, selon DIN 875 10.10
TCP SET... GRP I11 - FAM 329 Control pins, 60-64 Hrc Meetstiften, 60-64 Hrc Prüfstifte, 60-64 Hrc Jeux de pige contrôlés Item. nr. Designation Range Increment Quantity 19.11.3642 TCP SET 0100-2000/1.00 1-20 1 20 19.11.3643 TCP SET 0050-2000/0.50 0,50-20 0,50 40 19.11.3644 TCP SET 0100-0500/0.10 1-5 0,10 41 19.11.3645 TCP SET 0510-1000/0.10 5,10-10 0,10 50 19.11.1076 TCP SET 0100-1000/0.10 1-10 0,10 91 19.11.3646 TCP SET 0105-1005/0.10 1,05-10,05 0,10 91 19.11.3647 TCP SET 1010-2000/0.10 1,01-20 0,10 100 19.11.3648 TCP SET 0010-2000/0.10 0,10-20 0,10 191 19.11.1077 TCP SET 0050-0500/0.05 0,50-5 0,05 91 19.11.3649 TCP SET 0100-0500/0.05 1-5 0,05 81 19.11.3650 TCP SET 0505-1000/0.05 5,05-10 0,05 100 19.11.3651 TCP SET 0100-1000/0.05 1-10 0,05 181 19.11.1078 TCP SET 0050-0200/0.02 0,50-2 0,02 76 19.11.2107 TCP SET 0202-0400/0.02 2,02-4 0,02 100 19.11.2108 TCP SET 0402-0600/0.02 4,02-6 0,02 100 19.11.2109 TCP SET 0602-0800/0.02 6,02-8 0,02 100 19.11.2110 TCP SET 0802-1000/0.02 8,02-10 0,02 100 19.11.2117 TCP SET 0100-1000/0.02 1-10 0,02 451 19.11.2111 TCP SET 0050-0100/0.01 0,50-1 0,01 51 19.11.1079 TCP SET 0100-0200/0.01 1-2 0,01 101 19.11.2112 TCP SET 0201-0300/0.01 2,01-3 0,01 100 19.11.2133 TCP SET 0301-0400/0.01 3,01-4 0,01 100 19.11.2134 TCP SET 0401-0500/0.01 4,01-5 0,01 100 19.11.3652 TCP SET 0501-0600/0.01 5,01-6 0,01 100 19.11.3653 TCP SET 0601-0700/0.01 6,01-7 0,01 100 19.11.3654 TCP SET 0701-0800/0.01 7,01-8 0,01 100 19.11.3655 TCP SET 0801-0900/0.01 8,01-9 0,01 100 19.11.3656 TCP SET 0901-1000/0.01 9,01-10 0,01 100 10.11
TCPH... GRP I12 - FAM 345 Holders for control pins Houders voor meetstiften Halter für Messstiften Titulaire pour jeux de pige de contrôle Item. nr. Designation Fig. ød Range l 1 l 19.12.1057 TCPH D01 1 8 0,4 0,8 14 19.12.1058 TCPH D02 1 8 0,8 1,3 14 19.12.1059 TCPH D03 1 8 1,3 1,8 14 19.12.1060 TCPH D04 1 8 1,8 2,3 14 19.12.1061 TCPH D05 1 8 2,3 2,8 14 19.12.1062 TCPH D06 1 8 2,8 3,3 14 19.12.1063 TCPH D07 1 8 3,3 3,8 14 19.12.1064 TCPH D08 1 8 3,8 4,3 14 19.12.1065 TCPH D09 1 8 4,3 4,8 14 19.12.1066 TCPH D10 1 8 4,8 5,3 14 19.12.1067 TCPH V01 2 1 2 26 60 19.12.1068 TCPH V02 2 2 4 30 68 19.12.1069 TCPH V03 2 4 6 33 76 19.12.1070 TCPH V04 2 6 8 35 84 19.12.1071 TCPH V05 2 8 10 37 92 10.12
TTM... GRP I12 - FAM 332 Technical magnifiers Vergrootglazen Technikerlupen Loupes techniques Item. nr. Designation ød Magn. Fig. 19.12.1032 TTM U25-2.5 25 2,5x 1 19.12.1033 TTM U25-5.0 25 5x 1 19.12.1036 TTM U30-10.0 30 10x 1 19.12.1037 TTM S70-4.0 70 4x 2 19.12.1038 TTM P23-8.0 23 8x 3 19.12.1039 TTM F10-12.0-12x 4 19.12.1040 TTM F15-10.0-10x 4 19.12.1041 TTM F20-8.0-8x 4 19.12.1042 TTM F25-6.0-6x 4 19.12.1043 TTM F30-5.0-5x 4 19.12.1044 TTM G30-8.0 30 8x 5 19.12.1045 TTM G50-4.0 50 4x 5 19.12.1046 TTM K256-2.0-2x 6 19.12.1047 TTM K256-3.0-3x 6 19.12.1072 TTM K1719-2x / 3x 7 10.13
TMG... GRP I12 - FAM 333 tools Meetgereedschappen Messwerkzeuge Outils de mesure Item. nr. Designation Fig. Graduation Range 19.12.1048 TMG 81005 1 9 x 0,05-1,00 19.12.1049 TMG 81010 1 20 x 0,05 0,05-1,00 19.12.1050 TMG 81011 1 20 x 0,10 0,10-2,00 19.12.1051 TMG 81013 1 21 x 0,10 0,05-2,00 19.12.1052 TMG 8360 2 0,45-1,50 19.12.1053 TMG 8361 2 1,50-3,00 19.12.1054 TMG 8424 3 1-7 19.12.1055 TMG 8425 3 7,5-15 19.12.1056 TMG 8426 3 15,5-25 gauges 10.14
SL... GRP I11 - FAM 315 Sliding calipers Schuifbaar caliper Taschenmesschieber Pieds à coulisse Item. nr. Designation Fig. Range Reading 19.11.2071 SL 45 1 150 x 40 0,05 19.11.2072 SL 47 2 150 x 40 0,05 10.15
SL... MMS... BMMS... GRP XI12 - FAM 511 Measurement tools Meetgereedschappen Messwerkzeuge Outils de mesure Item. nr. Designation Specification L Fig. 19.11.3641 SL 150-D 0,01mm, +/- 0,002mm 150 1 19.11.3674 ECE-310-2 19.11.3675 ECE-330B (Premium) - 3 Various measuring tools Diverse meetgereedschappen Verschiedene Messwerkzeuge Différents outils de mesure SL Calipers, ECE Stands SL Schuifmaten, ECE Meetstatieven SL Greifzirke, ECE Mess-Stative SL Étriers, ECE Mesure Stands 10.16
WL... GRP XI12 - FAM 011 Working lights Werklampen Arbeitsscheinwerfer Lampe de travail Item. nr. Designation Specification V Fig. Fluorescent magnifying lamp 19.12.1150 WL 030L 19.12.1151 WL 103 19.12.1152 WL WN082 19.12.1153 WL W12 Fluorescerende loeplamp Lupenlampe Lampe à loup Flexible magnetic worklight Flexibele magnetische werklamp Flexible magnetische Lamp Lampe flexible magnétique Machine lamp Machine lamp Maschine Leucht Lumière pour machine LED machinelight LED machinelicht LED Maschineleucht LED lampe à machine 230 3 230 4 24 2 230 1 10.17
WEBSTER... GRP I11 - FAM 503 Webster hardness tester, Model B Webster hardheidsmeter Webster Härtemesser Webster duromètre Item. nr. Designation Part Description 19.11.3638 WEBSTER HT MOD B Onderdelen Spare parts Ersatzteile Des pièces de rechange 19.11.3657 WEBSTER P/N 103 A Frame, without anvil 19.11.3658 WEBSTER P/N 104 B Handle with sleeve 19.11.3659 WEBSTER P/N 108 C Pivot screw 19.11.3660 WEBSTER P/N 107 D Anvil, 3/8 19.11.3661 WEBSTER P/N 112 E Housing key 19.11.3662 WEBSTER P/N 111 F Return spring 19.11.3640 WEBSTER P/N 116 G Penetrator 19.11.3663 WEBSTER P/N 110-B H Load spring 19.11.3664 WEBSTER P/N 118 J Penetrator housing 19.11.3665 WEBSTER P/N 106 K Adjusting nut 19.11.3639 WEBSTER P/N 125-B L Dial indicator assembly 10.18
Newall... GRP XI11 - FAM 144 Digital readouts Digitale uitleessystemen Digitalanzeige Système d affichage numérique Item. nr. Designation Ax 322911 Newall DRO-1 1 322900 Newall DRO-2 2 322912 Newall DRO-3 3 Digital readouts from Newall. European manufacture and lifetime warranty on the rulers. Digitale uitleessystemen van Newall. Europees fabricaat en levenslange garantie op de linialen. Digitalanzeige von Newall. Hergestellt in Europa und lebenslange Garantie auf den Linealen. Système d affichage numérique de Newall. Fabriqué en Europe et garantie à vie sur les règles. Prices are exclusive of mounting. Huvema can also install the ruler on site at an additional cost of EUR 160, - per ruler. Prijzen zijn exclusief montage. Huvema monteert ook op locatie tegen meerprijs van EUR 160,- per liniaal. Preise sind exklusive der Montage. Huvema installiert auch auf Standort gegen einen Mehrpreis von EUR 160, - pro Lineal. Les prix s entendent hors montage. Huvema montage également sur place à un coût supplémentaire de EUR 160, - par la règle. 10.19
10.20