Weatherproof Tournament Table Tennis Table

Transcription

1 Weatherproof Tournament Table Tennis Table Owner s Manual Model Number Absolutely Weatherproof Printed on 100% recycled paper.! Made in Germany Thank you for purchasing our high quality KETTLER product. If you have any questions or concerns regarding this product, please contact us: KETTLER International, Inc. parts@kettlerusa.com Parts & Service Department Tel: ext. 26 P.O.Box 2747 Fax: Virginia Beach, Virginia USA Please have this owner s manual with you when you call. DO NOT CONTACT YOUR RETAILER.

2 Assembly Instructions Before assembling or using the table-tennis table, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts. All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the right to make technical changes at any time. Should you have any cause for complaint, please contact KETTLER at: KETTLER International, Inc. P.O.Box 2747 Virginia Beach, Virginia USA Tel: ext. 26 Fax: parts@kettlerusa.com Note on Safety The table tennis table should be used only for its intended purpose, i.e. for playing with suitable table tennis paddles and balls. All other uses are prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the table. Damaged or worn components may endanger your safety or shorten the lifespan of the table tennis table. Replace worn or damaged components immediately and remove the table from use until this has been done. Use only spare parts manufactured by KETTLER. The table tennis table complies with all safety regulations. Incorrect repairs, alterations to the design (removal of original parts, addition of other components etc.) may endanger the safety of the user. Instruct other persons (in particularly children) using the table in its correct use, and draw their attention to any potential source of danger, especially folding or closing the table. When setting up or dismantling the table, stay clear of its folding radius. When folded up, the table tennis table presents a large surface to the wind. For this reason, ensure that it is stored in a sheltered position. The unit complies with the standard DIN / Depending on frequency of use, check all screws, bolts etc. regularly to ensure that they are in good condition. Handling the equipment Do not use the table tennis table until it has been fully and correctly assembled and checked. Set the table up on a level surface. Do not cover it with plastic foil, under which condensation may form. We recommend the weatherproof KETTLER table tennis cover, art. no For practising without a partner, the table halves can be folded up singly. Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. In most cases, a slightly dampened cloth is sufficient. Limited One-Year Warranty (Residential use) Manufacturer warrants to the original retail purchaser, this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Should this product become defective due to material or workmanship within the warranty period, contact our Customer Service Department for repair or replacement at our opinion. This warranty is not transferable and does not cover normal wear and tear, bowing of the table or damage caused by improper handling, installation or use of this product. This warranty is also void if product is in any way abused, damaged, or modified from its original state, or if used for other than residential use. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If table does not seem level, it is probably because floor is not level. Move table several inches (set table in playing position) in different directions to find the best location for the table. If the floor is extremely unleveled, table may not play or operate properly. If table is high in the center, shim up under the outer legs. 2

3 Instructions for Assembly Carefully read these assembly instructions before beginning with the work itself. The individual steps are additionally explained in the sequence by means of symbols, in some cases a text mark indicates that a written explanation is available. Strictly follow the individual mounting steps to ensure a safe use and operation of the unit. To ensure that the table-tennis table is properly assembled and can be safely used, observe the instructions for assembly exactly. Notes on Text A B C D E Screw the connecting braces with the lateral parts. Screw the push braces with the lateral parts. Screw the locking levers with the middle connecting braces. Care for a correct installation of the locking levers (see designation 1 and 2). Now position one table half. Secure the table half against sliding and/or overturning for the subsequent installation steps! First, have a second person screw the angles attached to the table with the lateral parts. At each side, screw the push brace with the supporting leg. Repeat process with the other table half. Instructions for Use H 1 H 2 Lowering the table halves: Press down both locking levers. Then lower the table slowly (do not let the table move down fast). Collapsing the table halves: Pay attention to the fact that the tables always stand in final position and that the locking levers have been arrested such that the tables cannot be lowered unintentionally. 3

4 Checklist (contents of packaging) 1x 8x Actual size chart M6x90 ø12 20x M6x75 ø12 2 M6x65 M6 20x M6x45 M6 M6x35 8x You also need the following tools (Not included): 1x 4

5 1 2 5

6 3 A B A A B M6x35 4 B M6x75 6

7 5 C M6x90 6 D M6x45 7

8 7 E M6x65 8 C A B H 1 8

9 9 M6x35 10 Handling H 2 9

10 11 Handling 12 Handling C D E F 19mm Wood 22mm Aluminium A B A Adjustment knob; pull knob off net post and select desired thickness (22mm for aluminium top) B Slide the netposts between the table halves. C Slide the tension pin through net D Place pin in designated slots E Tie tension string to plastic tension tab. F Place tension string in slots over tension pin and net post. Adjust net tension by adjusting plastic tension tab. 10

11 Spare parts drawing

12 Spare parts list Item Description Pieces Part No. for (green) 1 Top-Half/Aluminium (PLEASE STATE ART.NO WHEN ORDERING TABLE HALF!) PVC-Clamp round PVC-Clamp square Front leg assembly Foot Cap Side shroud Leg connector bar PVC Spacer (Not shown) Center transport frame-half Square cap Frame cross bar Wheel assembly PVC bushing-wheel Safety lock # Safety lock # Lock spring Spacer Protector half sleeve Hardware bag (Not shown) Square cap open Stabilizer bar Bushing net (complete) plastic tension tab Ordering spare parts When ordering spare parts, always state the full product number, spare-part number, the quantity required and the control number stamped on the back. Example order: Product No / spare-part no / 2 pieces / inspection no... Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words with fastening material. For parts, please contact us at: KETTLER International, Inc. P.O.Box 2747 Virginia Beach, VA USA parts@kettlerusa.com Tel: ext. 26 Fax: In case of complaint, please state this control number. docu 823a/06.02