Vertical machining centre f milling and turning Flexible High Tech Solutions f Industry Those who look a little harder discover a lot me Machine Tools EN
Customized Efficiency
Machine Tools
MAXIMA 12 K16/3 MAXIMA 1 K3//8 MAXIMA 2 K3//8 Interpolated axes 6 6 6 X Stroke Y Stroke Z Stroke X Axis rapid feedrate Y Axis rapid feedrate Z Axis rapid feedrate in 1. - 3. 63-118.1 in 2.2 86.6 in m/min ipm m/min ipm m/min ipm 1. 39.4 2,3 2,3 1,575 3. - 6. - 8. 118-236 - 315 2.5/3.5 98.4/137.8 1.3 51.1 2,3 2,3 1,575 3. - 6. - 8. 118-236 - 315 3.5 137.8 1.3 51.1 2,3 2,3 1,575 A Axis rotation -15 +12 +135 +135 C Axis rotation continuous continuous continuous A Axis rapid feedrate rpm 5 5 5 C Axis rapid feedrate rpm 1 1 1 MILLING SPINDLE: Spindle power S6(%) / S1 kw HP / 53/53 54/ 72/53 85/74.6 114/1 / 53/53 54/ 72/53 85/74.6 114/1 / 53/53 54/ 72/53 Spindle tque S6(%) / S1 Nm 137/1 7/51 48/3 137/1 7/51 48/3 137/1 7/51 ft-lb 11/74 52/38 354/221 11/74 52/38 354/221 11/74 52/38 Spindle speed rpm 18. 28. 14. 18. 28. 14. 18. 28. TURNING SPINDLE: Turning table diameter Maximum swiveling diameter Spindle power S6(%) / S1 Spindle tque S6(%) / S1 1.2 in 47.2 1.8 in 7.9 kw HP Nm ft-lb 3/3 / 2.7/2. 1,991/1,475 1. 63 2. 78.7 88/68 118/91 8./6.5 6,196/4,794 2. 78.7 2.5 98.4 116/1 156/134 24./2. 18,145/14,752 Spindle speed range S6(%) / S1 rpm 5/ 35/3 248/23 Din 69893-1 milling tool taper HSK-63A HSK-63A HSK-1A HSK-63A HSK-1A Milling turning tool taper Capto C6 Capto C8 Capto C8 W Dimensions H L / in / in / in 5.9 / 232.3 4.85 / 191 5.-7. / 22.5-299.2 7.25-8.25 / 285.4-324.8 5.7 / 224.4 7.-9.7-12. / 291.3-381.8-472.4 8.25 / 324.8 5.7 / 224.4 7.-9.7-12. / 291.3-381.8-472.4 W Y Stroke H 25 25 Z Stroke X Stroke L 15 Table diameter
A competitive solution Multitasking, high-speed vertical 6-axes machining centre f vertical milling and turning of wkpieces up to 3.5 in diameter. MAXIMA is ideal f turning, milling, drilling and tapping components with a three-dimensional, complex shape such as those used in aeronautics and gear, energy general mechanical sects, minimizing the piece positioning operations during the transition from raw material to finished product. Wide range of configurations f custom made perfmances There are many ways to configure the machine in der to meet any job requirements: - standard version with one wk area - version with two wk areas f hunting machining - version with double Ram - version with double beam - different solutions f automated pallet loading/unloading are available f either a single machine machining islands. Easy access and clear view Clear view of the wk area that is within the operat easy reach thanks to the machine gantry structure with mobile bridge and wide frontal dos.
B axis rotation +18 /-18 I: BARENO MAXIMA 135 TORNADO HD + HHD +-15 B axis rotation +18 /-18 +-95 TORNADO 27 I: BARENO MAXIMA +-12 +-95 TORNADO HD kw (S6/S1) 85-75 Nm (S6/S1) 48-3 rpm 14. A axis -135 C axis continuous A axis (rpm) 5 C axis (rpm) 1 TORNADO kw (S6/S1) 54- - Nm (S6/S1) 7-51 137-1 rpm 28. 18. A axis -15 +12-15 +12 +-15 C axis continuous continuous PHOENIX VERTICAL TURNING HEAD 27-115 +-12 A axis (rpm) 5 5 C axis (rpm) 1 1 M 51/28 M 1/18 2 C axis rotation 18 +2 /-2 B axis rotation 1 +18 /-18 1 137 Nm 12 1 Nm 1 8 2 3 +-15 +-15 TORQUE (Nm) TORQUE (Nm) TORQUE (Nm) 7 7 7 Nm 51 Nm 5 54 kw kw 5 3 3 2 2 1 1 8 12 1 2 2 28 SPEED (min -1 ) S1-1% (kw) S1-1% (Nm) S6-% (kw) S6-% (Nm) 28 rpm 75 rpm 38 rpm 5 45 kw 35 3 25 2 15 1 5 9 12 15 18 SPEED (min -1 ) S1-1% (kw) S1-1% (Nm) S6-% (kw) S6-% (Nm) I: BARENO MAXIMA M 3/14 5 48 Nm 45 35 3 Nm 3 25 2 15 1 5 15 rpm 1 9 85 kw 8 74,6 kw 7 5 3 2 1 2 8 1 12 1 SPEED (min -1 ) S1-1% (kw) S1-1% (Nm) S6-% (kw) S6-% (Nm) 135 POWER (kw) POWER (kw) POWER (kw) M 51/28 Electrospindle featuring a power of kw, continuous tque of 51 Nm in S1 duty and 28. rpm: the ideal choice f customers requiring highspeed machining on either steel light alloys, from rough-machining up to precision finishing. M 1/18 Electrospindle featuring a power of kw, continuous tque of 1 Nm in S1 duty and 18. rpm: smartly perfming any machining operation on either steel light alloys, from roughmachining up to precision finishing. M 3/14 Electrospindle featuring a power of 48 kw, continuous tque of 3 Nm in S1 duty and 14. rpm: amazingly efficient when machining either steel super alloys, from rough-machining up to precision finishing. GHIBLI GALAXY HD FANTIC A superi head The electrospindles always offer the highest machining perfmance thanks to the cast-iron, fk designed head ensuring structural rigidity and efficient vibration damping. The totally syetrical structure of the head guarantees the best mechanical precision even when environmental temperature is variable. TORNADO HD + HHD 135 High Speed, Dynamics and Precision Carriage and beam travel on suitably dimensioned recirculating roller guides ensuring precision and stability. Axis motion is through a system consisting of a ground, recirculating roller screw / pre-loaded nut assembly, a double rack and pinion system with electronic backlash recovery, powered by brushless mot. TORNADO HD + HHD Axes are controlled by digital drives with latest generation, brushless servo mots. Wide range of electrospindles MAXIMA machining centre can be equipped with a wide range of electrospindles accding to the required machining. Machining precision is always guaranteed by the thermal stabilizing system of the spindle and the software designed to compensate natural, thermal expansions of the electro-spindle as the machining conditions change. Simple and reliable tool magazines. Depending on the version, the machine can be provided with moving, fixed wheel-type magazines chain magazines with manipulat f rapid exchange in der
to minimize the tool changeover time. Magazines are installed outside the wk area f protection against dirt and long-term reliability. They can also be provided with a system f the tool data automatic coding and chip reading. Top bellows and dust extraction Ideal f machining composite and resin-based materials, MAXIMA can be supplied with an efficient dust extraction system, which is installed on the spindle nose, and top bellows that completely enclose the machine thus isolating the wk area from the surrounding area. Different fume and dust extracting systems are available accding to the customer specific requirements. The ideal cooling system Depending on the type of machining, the tool cooling system may either use a coolant liquid flowing inside and outside the spindle (maximum litres/minute) with a fixed variable internal feeding pressure of up to 7 bar, incpate a spray mist system, simply use compressed air. MAXIMA Machine Tools
printed in italy by Labatio Grafico BST - 4/15-1. - EN BRETON SPA VIA GARIBALDI, 27 313 CASTELLO DI GODEGO TV - ITALY TEL +39 423 7691 - FAX +39 423 769 info@breton.it - www.breton.it UNI EN ISO 91:2 CERT. No. 56/4 UNI EN ISO 11:24 CERT. No. 299A/ Breton S.p.A. reserves the right to improve the products specifications and design, even during the execution of contracts. Therefe, every figure supplied, has to be regarded as an indicative and approximate figure. All right reserved. Any unauthized reproduction, publication, execution, loan, other public perfmance of this catalogue is peremptily fbidden and may constitute civil responsibility. Trespassers will be prosecuted by law.