Keri System Components Keri System Components Keri s makes setting up an access control system easy! The Tiger controller is at the heart of the system, and with just the additional components required, you can design a simple or sophisticated system without complicated wiring.the PXL network makes programming changes easy using Doors software. One door system Two door system SB-293 Magnetic Lock Switch Electric Strike Tags Three or more door system Magnetic Lock Switch Magnetic Lock Switch SB-293 RS-485 Network Cable Proximity Cards Electric Strike 245
Tiger Controller Tiger Controller Keri s Tiger Controller is a RISC-based multiprocess or platform strong enough to manage a 256 door network, yet tame enough to handle a single door.with Keri s high performance, low cost proximity readers, you have the ability to implement a solid access control system at a competitive price. Up to 128 controllers can be networked (RS-485 standard) to accommodate 256 individual doors using a twisted pair shielded and stranded (AWG-24 or larger) cable. With proximity readers, there is no physical wear and tear on the card, tag or reading device the card or tag is simply held up to a reader within the reader s detection range. Great installation features designed with the installer in mind: On-board diagnostic tests built in Diagnostic LED s on the controller board assist with troubleshooting Auto-Configures RS-485 grounding for optimum performance Quick disconnect terminals Software auto-configures system components The system architecture provides: 100% Intelligence at each door Expandable 1 or 2 Doors at a time RS-232 Serial Port for direct connection to PC or modem Reliable RS-485 Controller Network supports up to 256 doors 10,000 user capacity, expandable to 70,000 Support for Keri Proximity or any Wiegand Compatible Technology Specifications Power requirements 12 VDC @ 1.0 A (regulated) Operating Temperature/Humidity 0 F to 140 F 0 to 90% relative humidity, non-condensing Current draw 150MA maximum plus reader and SB-293 current draw Door & alarm output relay contact ratings: 3A @ 24DC Memory retention & real-time clock powered by 5 year lithium battery 3,600 Event buffer capacity The is UL certified under UL-508 (Control Equipment) All controllers are configured using Keri Systems acclaimed Doors for Windows Access Control System Software.The PC is not required to be online for system operation! Standard controllers are supplied as P for Keri proximity card or tag use.they are also available as a W to accept a Wiegand compatible input from any industry standard reader such as biometric, bar code, etc. HID compatible readers are available for use with the W. Details available on request. Hardware TIGER CONTROLLER Has all of the functionality needed to manage a single door, alarm output and 2 reader ports.a 2nd door can be added when used with SB-293 Satellite Expansion Board. Specify P for standard Keri proximity applications W for a Wiegand compatible controller. SB-293 SATELLITE EXPANSION BOARD The SB-293 Satellite Expansion Board plugs directly onto the to provide an additional 8 general purpose inputs and 4 general purpose outputs.with a simple jumper setting, two of the inputs and two of the outputs are configured to economically manage a second door.this card is required for two doors to be controlled from a single controller. Current draw: 150MA 246 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Intelliprox IP 2000X Series LCD-1 The optional LCD-1 Alpha/Numeric Plug-In Display adds access to built-in system diagnostics to aid in troubleshooting. It is highly recommended that an LCD-1 be used when setting up a new system. Intelliprox IP-2000X Series LAN-50 The LAN-50 allows the network to be attached to an IPbased local area network (LAN) instead of directly to a computer. This gives any workstation on a LAN (with the proper authority) the ability to communicate with the network. Doors Software Doors for use with Windows is a new, incredibly user friendly software package, perfect for managing access control applications from 1 to 256 doors with remote site capability. It has both spreadsheet and dialog box operation to make it easy to use for system operators with any types of computer background. Features include auto-configuration of the system hardware, walk-through Wizards that provide step-by-step instructions, and online help. Designed to be used by real people, not rocket scientists. Supplied at no additional cost with each system! Doors features: Runs under Windows 95, 98, ME, NT 4.0, 2000 & XP Full drag-and-drop functionality Step-by-step walkthrough Wizards Extensive help file Spreadsheet and dialog box modes for cardholder data entry Direct connect or dial-out with remote multiple site capability No dedicated PC required it runs in the background with other applications. Integrated Video Badging Keri has added fully integrated video badging capability into Doors access control software. Design and print your own photobadges on plastic cards or on overlays for prox cards. Design your own badges using software included with the package. You can also purchase a complete system including pre-configured PC, camera, PVC printer and accessories, all at an economical price. Contact us for details. The IntelliProx 2000 is a groundbreaking new product that can be used as an economical single door access control system for up to 500 users. It is an extremely simple and cost-effective solution and does not require the use of a computer. Programming is accomplished via the HPP-22 Hand Held Programmer or optionally with Keri s D-LITE software.with the HPP-22, cards or tags can be added or deleted from the access database, and the operator s security PIN (personal identification number) can be changed, all by simply pointing the programmer at the reader and issuing a simple command. The IntelliProx is capable of operating as a stand-alone singledoor entry control system or as a Wiegand output reader with back-up local door control.the IntelliProx controller can be mounted almost anywhere within 500 feet of the reader (depending upon the type and maximum cable run allowed by that reader). The IntelliProx has a standard 26-bit output, allowing data to be passed through to a host controller.the IntelliProx s LED can be driven by two control lines or by a single control line to accommodate the host controller s configuration. Optionally, the door lock control relay may be used for back-up local door control should the host controller go down. Host controllers that provide 5 to 12 VDC can power the IntelliProx. range is affected by differences in voltage provided. 247
Intelleprox IP 2000X Series D-Lite Software Features A computerized cardholder database that is sortable, much like an Excel spreadsheet and that removes the requirement to keep a manual card holder list The ability to backup the database The ability to program the IP-2000 without requiring the use of the HPP-22 The ability to manage more than one IP-2000 database from the same PC D-Lite is a simple, spreadsheet based card management program that can enroll cards, and upload or download a set of cards to an IntelliProx. D-Lite can be used when the IntelliProx is used as a stand-alone entry system and is not compatible when the IntelliProx is used as a 26-bit reader. Communication between a PC and the IntelliProx unit is done through an RS-232 serial connection. Features Relay Output for Electric Strike/Lock Nonvolatile Memory for up to 500 users Five Superior Proximity Styles to Choose From Simple Programming via Hand Held Programmer or Software Door status and Request-to-exit Inputs Local Door Held Open Alarm Tri-color LED and Audio Tone for User Feedback Can be used as a front end when a host system expands via a 26-bit Wiegand output Specifications Power requirements 5 to 14 Volts DC regulated Operating Temperature 0º to 65º Centigrade Current draw 50MA nominal plus reader current draw User capacity up to 500 Cards or Tags SPDT Relay contact ratings: 1A @ 30 Volts AC or DC Dimensions 3.5" High x 1.8" Wide x 0.7" Deep Door Unlock Time & Door held open time 7 Seconds Available Models & Accessories IP-2003X comes with the MS-3000 MicroStar Proximity IP-2004X comes with the MS-4000 ShootingStar Proximity IP-2005X comes with the MS-5000 MiniStar Proximity IP-2007X comes with the MS-7000 SuperStar Proximity * IP-2009X comes with the MS-9000 MegaStar Proximity * HPP-22 Hand Held Programmer for programming the Intelliprox D-Lite Software for IP-2000 Series KDP-2000 Intelliprox to PC 9 pin cable (DB9-F) SM-2000 Replacement Intelliprox control module * When using the Intelliprox as a front end, if the host controller provides 5 VDC reader power, the MS-7000 and MS-9000 readers should be powered by a separate power supply to ensure they have enough power for proper operation 12VDC minimum recommended. Cards & Tags Keri s 10X cards and tags can be used with P and the IP-2000X Series Intelliprox. 26X cards are used with the Intelliprox when a 26 bit Wiegand output is required. Cards and tags which support Keri s older models are also available. KC-10X & KC-26X The most popular proximity card thin enough to be wallet-friendly yet durable enough to carry a lifetime warranty. It comes standard with a vertical slot punch and can accept photos and graphics via industry standard adhesive packs (dye sublimation or laminated). Size is 2.13" x 3.38" x 0.065". Sequentially numbered (C5 formatting excepted). Lifetime warranty. Continued on next page 248 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Accessories MT-10X & MT-26X A PVC card capable of accepting images from industry standard dye sublimation printers. It also contains a magnetic stripe for applications where other systems also using mag stripe technology are in use. Size is 2.13" x 3.38" x 0.042". Sequentially numbered (C5 formatting excepted). 1 Year Warranty. PKT-10X & PKT-26X The industry s smallest and most durable proximity key tag.the tag is 100% transfer molded and is so durable it can withstand the weight of a vehicle. Size is 1.57" x 0.98" x 0.157". Sequentially numbered (C5 formatting excepted). Lifetime warranty. Peripherals and Accessories Power Supplies KPS-1 12V AC Plug-in transformer KPS-5 Boxed power supply 12V DC 2A with battery charging circuitry KPS-6 Boxed power supply 24V DC 2A with battery charging circuitry KPS-8 12VDC 6.5AH battery for KPS-5 & KPS-6 power supplies Cables KDP-251 KDP-252 KDP-336 Extras IRP-1 EXM-56 KRE-2 s to PC 25 pin to PC 9 pin to modem Isolation relay package 12/24V DC External 56K Baud modem (requires KDP-336 cable) Locking metal enclosure for The readers below are for use with P controllers and require a six conductor shielded, stranded (AWG24 minimum) wire for distances up to at least 100 feet from the controller. Distances up to 500 feet from the controller are possible with larger wire sizes.a multicolor LED and audio tone for user feedback is included on all readers except the MS-4000.These readers are supplied (as specified) with Intelliprox IP-2000X series controllers. MS-3000 MS-4000 MS-5000 MS-7000 MS-9000 Considered by many to be the smallest, most attractive proximity reader available, the MicroStar is designed to mount directly on a metal window/door frame (mullion) or any other location a small reader is required. Size is just 3.4" x 1.4" x 0.38" with a read range of up to 4". Current draw: 50MA This tough reader is designed for high crime areas. It has a beveled stainless steel housing so it cannot be pried from its mounting place, has a front surface that can withstand a bullet from a.357 or 9mm handgun, and is flame resistant. In addition to the normal front mounting holes, it also has rear blind mounting screw holes for extra security. Current draw: 50MA.This reader only requires a four-conductor cable since it is not supplied with either a beeper or LED. Size is 5.25" x 2.0" x.075" Designed to mount on a standard USA single gang box, the MiniStar provides up to 7" read range and measures just 4.3" x 3.0" x 0.38". Available in black or white. Current draw: 100MA This reader provides up to 15" of read range for applications where extra range adds to the convenience of the system, such as parking entrances or reading through extra thick building materials.the reader measures just 6" x 8.5" x 0.83", smaller than other readers with comparable read ranges.available in black or white. Current draw: 200MA Measuring 12" x 16" x 1.3", this reader provides up to 24" read range for applications where longer read distance adds to the convenience of the system, such as hands-free and physically challenged applications. Current draw: 200MA 249