odels RSR-, RSR- and RSR-T 1.6 troug 2-l 1 2 1 odel RSR3 2-l 1.6 troug 2 1 1 odel RSR3 Outer dimensions dimensions odel o. Heigt idt engt Greasing ole Grease nipple RSR 3 RSR 3 RSR 5 RSR 5 RSR 5T odel number coding Sl 1 T K E d H 3 4 8 6 16 16.9 2.1 2.1 8 8 3.5 5.5 7 1.61.3 21.3 21.5 2.61.8 21.5 6.7 1.7 8.8 3 1 4.5.8.8 1.5 ote) Since stainless steel is used in te, rail and balls, tese models are igly resistant to corrosion and environment. odels RSR3 and 3 do not ave an oil ole. en lubricating tem, apply a lubricant directly to te rail raceways. o contamination protection seal for RSR3/3. To secure te rail of models RSR5 and 5, use cross-recessed ead screws for precision equipment (o. pan ead screw, class 1) 2. 2 RSR5 UU 1 +13 P - odel number o. of s used on te same rail ontamination protection accessory symbol (*1) rail lengt (in mm) Radial clearance symbol (*2) ormal (o symbol) igt preload (1) Stainless steel rail Symbol for o. of rails used on te same plane (*4) Accuracy symbol (*3) ormal grade (o Symbol)/Precision grade (P) (*1) See contamination protection accessory on. (*2) See A. (*3) See A. (*4) See A. ote) Tis model number indicates tat a single-rail unit constitutes one set. (i.e., required number of sets wen 2 rails are used in parallel is 2 at a minimum.)
RSR 2 1 1 odels RSR5/5T 2-Sl Guide 1 2-Sl 2 1 rail dimensions odel RSR5 asic load rating Static permissible moment -m ass Unit: mm idt Heigt Pitc engt A rail 3 5 1 2 1 d 1 d 2 ax k k.2.2 2.5 2.6 1 22 3.5 4 2.43.51 48.18.3.32.55.55.27.44.59.96.96 1 Double s.293.726.884 1.84 1.84 2.11 4.33 6.51 11.9 11.9 1 Double s.293.726.884 1.84 1.84 2.11 4.33 6.51 11.9 11.9 1.45.73 1.53 2.49 2.49 kg.11.16.3.4.4 kg/m.55.14 ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter Recommended tigtening torque wen mounting te rail/ Table1 sows recommended bolt tigtening torques wen mounting te and rail of models RSR3/3. Table1 Recommended Tigtening Torques of ounting olts odel o. of screw Recommended tigtening torque (-m) 1.6.9 2.19 ote) Applicable to austenite stainless steel exagonal-socket-ead type bolts. Options
odels RSR-, RSR-K, RSR-V and RSR- 2 1 1 4-Sl odels RSR7 to /7/9K/V Outer dimensions dimensions odel o. Heigt idt engt Greasing ole Grease nipple RSR 7 RSR 7 RSR 9K RSR 9 RSR V RSR RSR V RSR RSR 2V RSR 2 odel number coding Sl 1 T K E d H 3 8 17 1 2 13 27 16 32 25 46 23.4 33 3.8 4.8 35 47.7 42.9 6.7 66.5 86.3 2 25 8 13 1 16 2 2 25 22.5 33 33.5 34 38 38 46 13.4 23 19.8 29.8 2.6 33.3 25.7 43.5 45.2 65 6.5 1.7 1.2 1.5 7.8 2.4 1.5 2.2 1 3 2 3 3.5 3.6 3.7 P17 4 5.7 17.5 5 6.4 A-6 7.5 ote) Since stainless steel is used in te, rail and balls, tese models are igly resistant to corrosion and environment. 2 RSRV UU 1 +23 P - odel number o. of s used on te same rail ontamination protection accessory symbol (*1) rail lengt (in mm) Radial clearance symbol (*2) ormal (o symbol) igt preload (1) Stainless steel rail Symbol for o. of rails used on te same plane (*4) Accuracy symbol (*3) ormal grade (o Symbol)/Hig accuracy grade (H) Precision grade (P) (*1) See contamination protection accessory on. (*2) See A. (*3) See A. (*4) See A. ote) Tis model number indicates tat a single-rail unit constitutes one set. (i.e., required number of sets wen 2 rails are used in parallel is 2 at a minimum.)
RSR 4-Sl E T 1 Guide 2 1 rail dimensions odels RSR and 2V/ asic load rating Static permissible moment -m ass Unit: mm idt Heigt Pitc engt A rail 7 1 2 1 d 1 d 2 ax k k.2 5 4.7 2.44.22.3 48.88 1.59 1.37 2.5 1 Double s 2.93 8.68 2.8 49.9 1 Double s 2.93 8.68 2.8 49.9 1 5 9. kg.13.18 kg/m.23 9.2 5.5 5.5 2 3.563.3 4 1.47 2.6 2.25 3.96 7.34 18.4 43.3 97 7.34 18.4 43.3 97 1.4 18.4.18.27.32.25 7.5 7.5 25 3.564.5 143 2.65 4.3 4.2 6.65 11.4 28.9 74.9 163 1.1 25.5 67.7 145 19.2 31.8.37.55.58.25 8.5 9.5 4 3.564.5 16 4.41 7.16 6.57 1.7 23.7 63.1 149 33 21.1 55.6 135 293 38.8 63.69.93.925 2.3 13 6 69.58.5 18 8.82 14.2.7 2.6 75.4 171 435 897 66.7 1 389 795 96.6 7.245.337 1.95 ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter Options
odels RSR-(T) and RSR-(T) 2 1 1 2-Sl odels RSR3 to 7/ Outer dimensions dimensions odel o. RSR 3 RSR 3 RSR 5 RSR 5T RSR 5 RSR 5T RSR 7 RSR 7T RSR 7 RSR 7T odel number coding Heigt idt engt Greasing ole Grease nipple Sl 1 T K E d H 3 14.9 4.5 8.5 4.5 21.7 3.5.8.8 1 19.9 8 13.3 22.1 6.5 32.3 13.7 22.1 13 2.51.5 13.7 6.5 17 5 1.1.8 1.5 28.1 11 32.3 19.7 28.1 13 2.51.5 19.7 9 25 31 31 4.9 4.9 19 19 8 18 17 43.5 33 43.5 33 2.4 2.4 3.3 3.3 7 1.6 1.2 2 ote) Te, rail, and ball material are composed of stainless steel and are corrosion resistant to general environments. To secure te rail of models RSR3 and 3, use cross-recessed ead screws for precision equipment (o. pan ead screw, class 1) 2. 2 RSR7 UU 1 +13 P odel number o. of s used on te same rail ontamination rail lengt Stainless steel protection (in mm) rail accessory symbol (*1) Accuracy symbol (*3) Radial clearance symbol (*2) ormal grade (o Symbol)/Hig accuracy grade (H) ormal (o symbol) Precision grade (P) igt preload (1) (*1) See contamination protection accessory on. (*2) See A. (*3) See A.
RSR 2-Sl E 2 1 1 odels RSR5T/T Guide 4-Sl 2 1 1 odels RSR7T/T rail dimensions asic load rating Static permissible moment -m ass idt Heigt Pitc engt A 1 Double 1 Double 1 1 2 3 1 d 1 d 2 ax k k kg s s.25.47.668 4.44.668 4.44 1.48.2 6 3 2.6 2.441.5 48.2.39.75 1.57 9.6 1.57 9.6 2.36.3.51.96 1.97 13.1 1.97 13.1 4.89.7.51.96 1.97 13.1 1.97 13.1 4.89.7 1 3.5 4 2 35.53 48.25.75 1.4 4.6 23.5 4.6 23.5 7.13.1.75 1.4 4.6 23.5 4.6 23.5 7.13.1 14.5 5.5 5.2 3 3.563.2 48 1.37 1.37 2.4 2.4 2.16 2.16 3.21 3.21 7.2 7.2 14.7 14.7 4.7 4.7 77.6 77.6 7.2 7.2 14.7 14.7 4.7 4.7 77.6 77.6.4.4 22.9 22.9.21.21.26.26 Unit: mm ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter rail kg/m..28.51 Options
odels RSR-V, RSR-V and RSR- T 2 1 1 4-Sl odels RSR9, V/V/ Outer dimensions dimensions odel o. Heigt idt engt Greasing ole Grease nipple RSR 9V RSR 9V RSR 9 RSR V RSR V RSR odel number coding Sl 1 T K E d H 3 3 14 4 39 39 5.7 44.5 44.5 59.5 21 21 23 28 24 28 2.63 2.63 33 33.5 27 27 38.7 3.9 3.9 45.9 7.8 2 1.6 4.2 4.5 1 3 2 4 RSR 14V 5 5 35 18 44.5 34.3 6 11.5 3 4 P17 3.5 RSR V RSR V RSR 16 6 55.5 55.5 74.5 45 2 2 35 44.5 38.9 38.9 57.9 5.6 3.5 3 P17 4 ote) Te, rail, and ball material are composed of stainless steel and are corrosion resistant to general environments. 2 RSRV UU 1 +31 H odel number o. of s used on te same rail ontamination protection accessory symbol (*1) rail lengt (in mm) Stainless steel rail Accuracy symbol (*3) ormal grade (o Symbol)/Hig accuracy grade (H) Precision grade (P) Radial clearance symbol (*2) ormal (o symbol)/igt preload (1) (*1) See contamination protection accessory on. (*2) See A. (*3) See A.
RSR 4-Sl T 4-Sl T 2 2 1 3 1 1 odel RSR14V 1 E E Guide odels RSRV/V/ rail dimensions asic load rating Static permissible moment -m ass Unit: mm idt Heigt Pitc engt A rail 18 24 3 42 1 2 3 1 d 1 d 2 ax k k.5.5.5.5 6 7.5 3 3.564.5 143 8 8.5 4 4.584.5 16 2.45 2.45 3.52 4.2 4.2 5.96 3.92 3.92 5.37 6.8 6.8 9.21 1 Double 1 Double 1 s s 16 92.9 16 92.9 36 16 92.9 16 92.9 36 31 161 31 161 49.4 24.5 24.5 53.9 138 138 274 21.7 21.7 47.3 3 3 242 59.5 59.5 9.1 kg.35.35.51.75.75.11 1 9 4 4.57.55.3 18 6.1 9.8 43.2 233 38.2 28 11.96 2 9 23 9.5 4 4.584.5 18 6.66 6.66 9.91 9.8 9.8 14.9 5.3 5.3 11 278 278 555 44.4 44.4 97.3 248 248 49 168 168 255.17.17.21 ote) Te maximum lengt under engt indicates te standard maximum lengt of an rail. (See.) Static permissible moment : 1 : static permissible moment value wit 1 Double s: static permissible moment value wit 2 s closely contacting wit eac oter kg/m 1.8 1.5 3 Options