Industrial Data Solutions

Transcription

1 Industrial Data Solutions

2 Introduction Belden CDT IndustrialTuff Cables - Tough Cables for Tough Environents Today ore than ever, factory floor productivity depends upon sealess data transfer and autoation. And both depend upon high-perforance cabling solutions you can rely on, even in the toughest environents. Depend on Belden CDT. We have developed the world s ost coprehensive line industrial cabling solutions for applications like yours whether you re networking your factory floor equipent and devices to your controllers and on to your control roo, or relaying data between the control roo, the engineering departent and reote anufacturing sites or all the above. Fro your plant to your corporate headquarters and everywhere in between Belden CDT has your cabling solution. Most iportantly, you can have the peace--ind that coes with choosing Belden CDT cables since all Belden CDT products are anufactured to the industry s highest standards quality. Belden CDT is, in fact, the copany that has been the ost depended on for decades for all industrial autoation needs. Belden CDT cables give you the perforance you need, day after day. 4

3 5

4 Your Single Source for Industrial Cables Belden CDT IndustrialTuff products fer solutions for a wide range anufacturing or process operations. Fro devices to controller to inforation gathering, Belden CDT has the right cable for reliable counications. Industrial Ethernet: Networking cables with Installable Perforance The reliability your Industrial Ethernet network is fully dependent on the cable infrastructure since transission errors can lead to lost production tie and even downtie or safety issues. Belden CDT understands the critical nature your application and has designed its Industrial Ethernet cables to provide top perforance, despite the harsh and deanding nature the environent. Belden CDT s patented Bonded-Pair cable constructions are featured in our line Industrial Ethernet products. Bonded-Pair technology eans Installable Perforance that is, cable that are designed to withstand the pulling, bending, kinking, coiling and crushing that routinely takes place during an installation. Therefore, the cable you buy has the perforance you specified even after it s been installed. 4

5 5 2

6 Belden CDT Industrial Data Solutions : Belden CDT s full line Industrial Data Solutions includes cables for all types bus applications such as Pribus, Fieldbus, DeviceNet, ControlNet, InterBus-S, and so on. We practically invented Blue Hose twinax cables fro the original IBM specification, but today they are the doinant call-out for PLC and DCS applications. Choose ControlBus quad shielded coax cables for ControlNet applications all Belden CDT industrial coax cables give you the dependability you need to assure long-lasting perforance. We also anufacture a full line cables for Pribus and Fieldbus applications and DeviceBus cables for ODVA DeviceNet systes. Additionally, Belden CDT fers a wide range Variable Frequency Drive (VFD) cables, Control and Instruentation cables, and our Infinity line Flexible Autoation cables. The diverse anufacturing facilities Belden CDT also allow us to fer cables with any different physical properties to eet the deands on industrial cabling applications. We produce cables with aterials that are resistant to the effects teperature, UV-Sunlight, oil, gasoline, and other cheical solvents. Plus we have the ability to fer both Steel Wire Arour and interlocking steel or aluinu Arour for extra protection against crushing and abrasion. Whatever your needs, Belden CDT has the solution. 4

7 5

8 8 Table Contents Industrial Autoation and Process Control Cables Page Introduction 1-6 Table Contents 7 PLC/DCS Cable Cross Reference Guide 9-10 Industrial Counications Protocol 11 Industrial Data Solutions Industrial Ethernet DataTuff Industrial Ethernet Cable Selection Guide 12 Industrial Ethernet Fiber Optic Cable Selection Guide 12 DataTuff Twisted Pair Cables Coaxial Cables 16 Industrial Twinax Blue Hose Cables Twinaxial Cables DataTray 600V Twinaxial Cables 20 Industrial Coax ControlNet Quad Shielded Coax 21 ControlBus Quad Shielded Coax 22 Industrial Data DataBus ISA/SP-50 Fieldbus* or Pribus Cables DeviceBus for ODVA DeviceNet DeviceBus for Honeywell Sart Distributed Syste 28 DeviceBus for Square D/Seriplex 29 DeviceBus for Phoenix Contact InterBus -S 30 EIA Industrial RS-485 PLTC/CM, HART, CAN 31 CC-Link Cables 32 LonWorks Cables 33 Overall Foil/Braid Shield EIA RS-485 Applications, CAN, Plenu-Rated and Non-Plenu 34 Interconnect Cable Shielded Twisted Pair Cables VFD (Variable Frequency Drive) Cable 1000V UL Flexible Motor Supply Cable 37 Belden CDT Infinity Flexible Autoation Cable Overview and Application Guide 38 Instruentation Cable 300V Power-Liited Tray Cables Overview 39 Therocouple Extension Cables and Therocouple Wire Overview V Tray Cables Overview 41 Control Cable 600V Type TC Cables Overview V Type MC Metal Clad and Teck-Style Cables Overview 43 CSA Control Cable 600V ACIC and Teck90 Cables Overview 44 Technical Inforation Aerican Wire Gage (AWG) Equivalency Chart 45 Conversion Table 45 Conductors Current Ratings for Belden CDT Electronic Cables 46 Shielding Overview 47 Characteristics Belden CDT Shield Types 48 Shielding and Arouring Shield Types Application Guide and Relative Cost Coparison 49 Belden CDT Colour Code Charts 50 Index Nubers 51 Product Inforation 51

9 9 PLC/DCS Cable Cross Reference Guide PLC/DCS Manufacturer Syste Nae Belden CDT PLC/DCS Manufacturer Syste Nae Belden CDT ABB/ Infinet 9880 Network Trunk Cable Bailey Controls 9463 Blue Hose () 9463LS Steel Wire Arour NH Low Soke, Halogen-Free 9463 Masterpiece Network Trunk Cable 9907 Thin Network Trunk Cable MICRO-DCI 3105A 1 Pair, RS-485 MICROLINK 9860 Twinax, 16 AWG, 124 Oh 9860LS Steel Wire Arour NH Low Soke, Halogen-Free 9860 Modcell 3105A 1 Pair, RS-485 Allen-Bradley/ ControlNet See Protocol listings on page 10 Rockwell DeviceNet See Protocol listings on page 10 Autoation DH 9463 Blue Hose () 9463LS Steel Wire Arour NH Low Soke, Halogen-Free F Flexible Version (9463) Aluinu Arour (9463) Steel Arour (9463) Cast Aluinu (9463) YR28826 Dual Version (9463) 9463DB Direct Burial (9463) YR29565 Various Colour Jackets (9463) 3072F 600V TC Rated (9463) YR28764 Super Thick (PLTC) FEP* 200 C, Plenu DH F 600V Tray Cable 3106A 1.5 Pair, RS-485 (PLTC) Pair, RS-485, NH, LS 9842LS Steel Wire Arour NH Low Soke, Halogen-Free 9842 YM39500 Flexible Version (3106A) Longline Counications 8723 Interface Cable Plenu Version Cutler-Haer/ IMPACC Syste YR29090 Proprietary Trunk Cable Westinghouse I/Q Syste 9463 Blue Hose () 9463LS Steel Wire Arour NH Low Soke, Halogen-Free 9463 Eerson Process Fieldbus See Protocol listings on page 10 Manageent (Type SP50 ISA/IEC) (Fisher/Rose- Hart See Protocol listings on page 10 ount Controls) Provox Plus 3094A RG-11 Quad Shield PVC 3131A RG-6 Quad Shield PVC GE Fanuc Genius I/O Syste YR29841 PLTC Version 9182 Counications Bus Plenu Version Honeywell Access 4000 Syste 9248 RG-6 PVC Fieldbus See Protocol listings on page 10 (Type SP50 ISA/IEC) IPC 620 I/O 9271 Twinax, 25 AWG, 124 Oh Syste Serial Interface 9729 Up to ft up to ft Plenu 3000 UCN & LCN 3131A RG-6 Quad Shield PVC 9094A RG-11 Quad Shiel PVC Honeywell Micro- Sart Distributed Syste 3086A Mini switch Division 3087A Micro Invensys/Foxboro Fieldbus See Protocol listings on page 10 (Type SP50 ISA/IEC) I/A Series Carrier Band 8233 Sall Trunk 3095A Plenu 9290 Drop Cable Fieldbus 9207 Twinax 9207NH Low Soke, Halogen-Free C, Plenu 3073F 600V Tray Cable Invensys/Foxboro Node Bus 9880 Trunk Cable (continued) Plenu Version Liitorque DCC A Actuator Bus Cable, 1 Pair, RS-485 Matsushita FP Series C-NET 9207 Twinax, 20 AWG, Stranded, 100 Oh 9207NH Low Soke, Halogen-Free Twinax, 16 AWG, Solid, 124 Oh 9860LS Steel Wire Arour NH Low Soke, Halogen-Free 9860 MEWNET-F 9207 Twinax, 20 AWG, Stranded, 100 Oh 9207NH Low Soke, Halogen-Free Twinax, 16 AWG, Solid, 124 Oh 9860LS Steel Wire Arour NH Low Soke, Halogen-Free 9860 MEWNET-H 9248 RG-6, 75 Oh, 18 AWG MEWNET-TR 9207 Twinax, 20 AWG, Stranded, 100 Oh 9207NH Low Soke, Halogen-Free Twinax, 16 AWG, Solid, 124 Oh 9860LS Steel Wire Arour NH Low Soke, Halogen-Free 9860 MEWNET-W 9207 Twinax, 20 AWG, Stranded, 100 Oh 9207NH Low Soke, Halogen-Free Pair, RS-232, RS-422 MEWNET-W Twinax, 20 AWG, Stranded, 100 Oh 9207NH Low Soke, Halogen-Free Twinax, 16 AWG, Solid, 124 Oh 9860LS Steel Wire Arour NH Low Soke, Halogen-Free 9860 TRNET 9207 Twinax, 20 AWG, Stranded, 100 Oh 9207NH Low Soke, Halogen-Free Twinax, 16 AWG, Solid, 124 Oh 9860LS Steel Wire Arour NH Low Soke, Halogen-Free 9860 Mitsubishi DeviceNet See Protocol listings on page 10 CC-Link YR47205 Three-Conductor YR47198 Three-Conductor + Power Melsecnet (II) 10/10H 1505A Precision RG-59/U Coax 1505F High Flex 1505A 1506A Plenu Precision Rg-59/U, Outdoor, Direct Burial 8241 RG-59/U Coax 8241F High Flex 8241F Pribus DP & FMS See Protocol listings on page 10 Serial Counications 8777 Control and Instruentation Interconnect Cable 8777LS Steel Wire Arour NH Low Soke, Halogen-Free 8777 Modicon/ Modbus 8777 Mode Drop Cable, 22 AWG, 3 Pair Schneider AEG 8777LS Steel Wire Arour NH Low Soke, Halogen-Free Aluinu Arour (8777) Steel Arour (8777) FEP* 200 C, Plenu Modbus II 3092A RG-6 Quad Shield PVC 3132A RG-6 Quad Shield, 150 C, Plenu 3092F RG-6 Quad Shield PVC, Flexible Version A Aluinu Arour (3092A) A Steel Arour (3092A) Modbus Plus YM AWG, 1 Pair, RS-485 YC39000 Aluinu Arour (YM29560) YC39222 Steel Arour (YM29560) YQ AWG, 1 Pair, 150 C, Plenu Reote I/O 3092A RG-6 Quad Shield PVC 3092F RG-6 Quad Shield PVC, Flexible Version A Aluinu Arour (3092A) A Steel Arour (3092A) F Aluinu Arour, RG-6 Quad Shield PVC

10 10 PLC/DCS Cable Cross Reference Guide (continued) PLC/DCS Manufacturer Syste Nae Belden CDT PLC/DCS Manufacturer Syste Nae Belden CDT Modicon/ Reote I/O 3132A RG-6 Quad Shield, 150 C, Plenu Schneider AEG 3094A RG-11 Quad Shield PVC (continued) A Aluinu Arour (3094A) A Steel Arour (3094A) 3095A RG-11 Quad Shield, 150 C, Plenu Oron AS Interface See Protocol listings on page 10 CopoBus/D (DeviceNet) See DeviceNet Protocol listings on page 10 CopoBus/S Pair, 18 AWG, 300V PLTC Control Pair, 18 AWG, 300V PLTC Control, Shielded 3073F 600V Twinax Tray Cable 3076ENH Fieldbus, Low Soke, Halogen-Free Pair, 18 AWG, 300V Control Controller Link 9207 Twinax 9207NH Low Soke, Halogen-Free Twinax, 200ºC, Plenu Oh Twinax, Direct Burial 3073F 600V Twinax Tray Cable SYSBUS F 600V Tray Cable Twinax SYSMAC BUS AWG, 1 Pair, RS LS Steel Wire Arour NH Low Soke, Halogen-Free A 22 AWG, 1 Pair, RS-485 SYSMAC LINK 9231 Coax Phoenix Contact DeviceNet See Protocol listings on page 10 Interbus -S See Protocol listings on page 10 Pribus DP FMS & PA See Protocol listings on page 10 Reliance/A-B Auto Max Distributed MTB Fiber Breakout Power I Fiber Loose Tube PVC I Fiber Loose Tube CPE R-Net 9259 RG-59 PVC RG-59, 200 C, Plenu Rotork Pakscan II E RS A 22 AWG, 1 Pair, RS-485 Sieens/Moore FMC (Field Mountable 3105A 1 Pair, RS-485 Controller) 3106A 1.5 Pair, RS A 2 Pair, RS A 3 Pair, RS A 4 Pair, RS-485 * Fluorinated Ethylene-propylene Hiway 9860 Network Trunk Cable 9860LS Steel Wire Arour NH Low Soke, Halogen-Free 9860 MODULNET 3094A RG-11 Quad Shield PVC 3131A RG-6 Quad Shield PVC Pribus DP & FMS (Purple) See Protocol listings on page 10 Pribus PA (Blue) See Protocol listings on page 10 SINEC Series H Thin Network Trunk Cable 9880 Network Trunk Cable H2B 3131A RG-6 Quad Shield 3094A RG-11 Quad Shield L A 2 Pair, RS-485 L2 3079A 300V Twinax 3079ALS Steel Wire Arour 3079A 3079ANH Low Soke, Halogen-Free 3079A 3079E Stranded Conductor 3079A Sieens/Moore Thicknet Ethernet Trunk 9880 Network Trunk Cable (continued) Aluinu Interlocked Arour Trunk Steel Interlocked Arour Trunk See Protocol listings on page 10 Thinnet Ethernet Trunk 9907 Thin Network Trunk Cable See Protocol listings on page 10 Sar Fieldbus See Protocol listings on page 10 (Type SP50 ISA/IEC) Pribus DP, FMS & PA See Protocol listings on page 10 RS-485 See Protocol listings on page 10 Square D/ FIP/Fieldbus 3079A 22 AWG, 1 Pair, Shielded Schneider AEG 3079ALS Steel Wire Arour 3079A 3079ANH Low Soke, Halogen-Free 3079A 3079E Stranded Conductor 3079A A Aluinu Arour (3079A) Model 50, RS-422 Cable AWG, 1 Pair, Shielded Aluinu Arour (8760) Passport I/O I/O Net 3105A 22 AWG, 1 Pair, RS A Aluinu Arour (3105A) 3106A 22 AWG, 1.5 Pair, RS A Aluinu Arour (3106A) Power Logic AWG, 1 Pair, RS LS Steel Wire Arour NH Low Soke, Halogen-Free AWG, 2 Pair, RS LS Steel Wire Arour NH Low Soke, Halogen-Free 9842 Seriplex 3124A CBL-1822-P A CBL-1622-P A CBL P A Aluinu Arour (3124A) A Aluinu Arour (3125A) A Aluinu Arour (3126A) SY/Net Network Trunk 9463 Blue Hose () Cable 9463F Flexible Version (9463) Aluinu Arour (9463) Steel Arour (9463) Cast Aluinu (9463) YR28826 Dual Version (9463) 9463DB Direct Burial (9463) YR29565 Various Colour Jackets (9463) 3072F 600V TC Rated (9463) YR41194 Low Soke, Halogen-Free YR28764 Super Thick (PLTC) FEP* 200 C, Plenu SY/Net TNIM Cable AWG, 1 Pair, Shielded FEP* 200 C, Plenu Yokogawa Fieldbus See Protocol listings on page 10 (Type SP50 ISA/IEC) Westinghouse WDPF 9292 RG-11 PVC ControlNet is a ControlNet International tradeark. DeviceNet is an Open DeviceNet Vendor Association, Inc. tradeark. Interbus is a Phoenix Contact tradeark. Seriplex is a Square D/Schneider AEG registered tradeark.

11 11 Industrial Counications Protocol Syste Nae Belden CDT Syste Nae Belden CDT AS Interface 3999A Yellow Bus Cable ControlNet 3092A RG-6 PVC Quad Shield 3092F RG-6 PVC Quad Shield, Flex Version, Aluinu Braid YR28890 RG-6 PVC Flex Version, Copper Braid 3093A RG-6 FEP* Quad Shield, Plenu A Aluinu Arour (3092A) A Steel Arour (3092A) DeviceNet 3082A PVC (Thick) 3082F High-Flex (Thick) 3082K CL2 (Flat) 3082KP Auxiliary Power (Flat) 3083A CPE (Thick) 3084A PVC (Thin) 3084F High-Flex (Thin) 3085A CPE (Thin) 7895A CL2 PVC (Cable III Mid) 7896A CL1 PVC (Type V Trunk Cable) 7897A CL1 PVC (Thick) 7900A CL1 Unshielded (Drop Cable IV) Ethernet Fiber Optic See Industrial Ethernet Fiber Optic Cable Selection Guide on page 11 Ethernet Thicknet Base 5 Network Trunk Cable Plenu 9880 Ethernet Thinnet Base 2 Network Trunk Cable Plenu 9907 Ethernet Twisted Pair See DataTuff Industrial Ethernet Cable Selection Guide on page 11 Fieldbus (Type SP50 ISA/IEC) 3076F Type A, H (31.25K) 3076ELS Steel Wire Arour 3076F 3076ENH Low Soke, Halogen-Free 3076F 3077F Type B, H (31.25K) 3077ELS Steel Wire Arour 3077F Fieldbus (Type SP50 ISA/IEC) 3077ENH Low Soke, Halogen-Free 3077F (continued) 3078F High-Speed ( bits/s) HSE Copper & Fiber (See Cables for Industrial Ethernet) Hart 3105A 1 Pair, RS A 1.5 Pair, RS A 2 Pair, RS-485 Interbus -S 3119A 18/3C, 24/3 Pair, Coposite 3120A 24/3 Pair Pribus DP & FMS (Purple) 3079A 300V Twinax 3079ALS Steel Wire Arour 3079A 3079ANH Low Soke, Halogen-Free 3079A 3079E Stranded Conductor 3079A Pribus PA (Blue) 3076F 18 AWG, 2 Conductors, Type A 3076ELS Steel Wire Arour 3076F 3076ENH Low Soke, Halogen-Free 3076F RS-485 / HART / CAN Pair 9841LS Steel Wire Arour NH Low Soke, Halogen-Free Pair, Plenu Pair, Plenu, High-Teperature Pair 9842LS Steel Wire Arour NH Low Soke, Halogen-Free Pair, Plenu Pair 9843NH Low Soke, Halogen-Free Pair 3105A 1 Pair (PLTC) 3106A 1.5 Pair (PLTC) 3107A 2 Pair (PLTC) 3108A 3 Pair (PLTC) 3109A 4 Pair (PLTC) * Fluorinated Ethylene-propylene ControlNet is a ControlNet International tradeark. DeviceNet is an Open DeviceNet Vendor Association, Inc. tradeark. Interbus is a Phoenix Contact tradeark.

12 12 Industrial Data Solutions Industrial Ethernet u u u DataTuff Industrial Ethernet Cable Selection Guide (See pages for product detail.) Shielding Category Unshielded Shielded * Solid Conductor Stranded ** Flexibility Installation Environental Issues Installation Stress Resistance Oil Resistance UV Sunlight Resistance Gasoline Resistance HI/LO Tep Industrial Grade Jacket Heavy Upjacket Aroured BEB1212 Cat 5e BEB3212 Cat 5e 7923A Cat 5e 7929A Cat 5e 7921A Cat 5e 11700A Cat 5e 11700A2 Cat 5e A Cat 5e 7924A Cat 5e 7928A Cat 5e 7918A Cat 5e 7919A Cat 5e 7927A Cat A Cat A Cat A Cat 6 * Shielded products are recoended for high-noise environents. ** Stranded products are recoended where ore flexibility is needed. Products with Bonded-Pair technology provide Installable Perforance advantages refer to Belden CDT Bonded-Pair Cable Bulletin #BP02. This chart is eant to help the user select the right cable. Refer to cable specifications for details. See for fiber optic cable recoendations and technical data sheets. PVC LSHN/ FRNC Industrial Ethernet Fiber Optic Cable Selection Guide Jacket Material Fibers Outer Diaeter Inches Jacket Material Fibers Outer Diaeter Inches Fiber (9/125) Micron, Singleode, OS1 Central Loose Tube, Steel Wire Arour, Iproved Rodent Protection GOWA904 PE 4 Outdoor, T GOWA908 PE 8 Outdoor, T GOWA912 PE 12 Outdoor, T GUWA908 FRNC 8 Universal, T GUWA912 FRNC 12 Universal, T GUWB924 FRNC 24 Universal, T GOWB924 FRNC 24 Outdoor, T Fiber (62.5/125) Micron, Multiode, OM1 Central Loose Tube, Steel Wire Arour, Iproved Rodent Protection GOWA106 PE 6 Outdoor, T GOWA112 PE 12 Outdoor, T GUWA104 FRNC 4 Universal, T GUWA108 FRNC 8 Universal, T GUWA112 FRNC 12 Universal, T GUWB124 FRNC 24 Universal, T Fiber (50/125) Micron, Multiode, OM2 Central Loose Tube, Steel Wire Arour, Iproved Rodent Protection GOWA204 PE 4 Outdoor, T GOWA206 PE 6 Outdoor, T GOWA212 PE 12 Outdoor, T GUWA204 FRNC 4 Universal, T GUWA208 FRNC 8 Universal, T GUWA212 FRNC 12 Universal, T

13 13 Industrial Data Solutions Industrial Ethernet Category 5e DataTuff Twisted Pair Cables Heavy-Duty Sunlight- and Oil-Resistant Jackets Enhanced Cat 5e 24 AWG/ Bonded-Pairs Solid BC Polyethylene Insulation.028ʺ/0.7 Industrial Grade Sunlight- and Oil-resistant Low Soke, Zero-Halogen Jacket (Black, Grey, ) Unshielded BEB1212 IEC u x x Rip Cord EtherNet/IP TM copliant RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 1 intervals. Verified to ISO/IEC (2nd Edition), EN , TIA/EIA-568-B.2, Category 5e Enhanced Cat 5e 24 AWG/ Bonded-Pairs Solid BC Overall Beldfoil Shield + 40% TC Braid 26 AWG Drain Wire Polyethylene Insulation.028ʺ/0.7 Industrial Grade Sunlight- and Oil-resistant Low Soke, Zero-Halogen Jacket (Black, Grey, Blue) Heavy Shielded BEB3212 IEC u x x EtherNet/IP TM copliant. RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 1 intervals. Verified to ISO/IEC (2nd Edition), EN , Cat. 5e Enhanced Cat 5e 24 AWG Bonded-Pairs Solid BC Rip Cord Polyolefin Insulation.030ʺ Industrial Grade Sunlight- and Oil-resistant Black PVC Jacket Unshielded 7923A NEC: u CMR, x x CMX Outdoor CEC: CMR FT4 Rip Cord UL NEC/ C(UL) CEC Type Pairs Lengths Unit Wt. EtherNet/IP TM copliant. RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Cat 5e 24 AWG Bonded-Pairs Solid BC Overall Beldfoil Shield 24 AWG Stranded TC Drain Wire Polyolefin Insulation.030ʺ Industrial Grade Sunlight- and Oil-resistant Black PVC Jacket Shielded 7929A NEC: u CMR, x x CMX Outdoor CEC: CMR FT4 RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Shield is bonded to jacket inner wall for electrical stability. Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Cat 5e 24 AWG Bonded-Pairs Solid BC Overall Beldfoil + 70% TC Braid 24 AWG Solid Spiral Drain Wire Polyolefin Insulation.030ʺ Industrial Grade Sunlight- and Oil-resistant Black PVC Jacket Heavy-shielded 7921A NEC: u CMR, x x CMX Outdoor CEC: CMR FT C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Enhanced Cat 5e 24 AWG Bonded-Pairs Solid BC Rip Cord Polyolefin Insulation PVC Inner Jacket.035ʺ Industrial Grade Black or Gray PVC Outer Jacket Upjacketed 11700A NEC: (Sae as 7923A above) Unshielded CMR x x CEC: CMR FT4 Core OD: For Oil Res II Version 11700A, see 11700A2. Rip Cord EtherNet/IP TM copliant. RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Outer jacket is sunlight- and oil-resistant. Enhanced Cat 5e 24 AWG Bonded-Pairs Solid BC Mylar Wrap Rip Cord Lbs. kg Insulated Conductor OD Inch Polyolefin Insulation PVC Inner Jacket.045ʺ Industrial Grade Black or Gray PVC Outer Jacket Interlocked, AL A NEC: (Sae as 7923A above) Arour, Unshielded CMG x x CEC: HL Core OD: CMG FT Rip Cord RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 1 eter intervals. Verified to TIA/EIA-568-B.2, Category 5e Outer jacket is sunlight- and oil-resistant. ACR = Attenuation Crosstalk Ratio AL = Aluinu BC = Bare Copper TC = Tinned Copper ELFEXT = Equal Level Far-end Crosstalk NEXT = Near-end Crosstalk PSUM = Power Su RL = Return Loss Inch OD Freq. (MHz) Max. Atten. (db/ 100) Min. PSUM NEXT (db) Min. PSUM ACR (db/ 100) Min. PSUM ELFEXT (db/ 100) Input Iped. (Ω) 100±12 100±12 100±12 100±12 100±18 100±20 100±22 100±25 Min. RL (db)

14 14 Industrial Data Solutions Industrial Ethernet Category 5e and 6 DataTuff Twisted Pair Cables Heavy-Duty Sunlight- and Oil-Resistant Jackets UL NEC/ C(UL) CEC Type Pairs Enhanced Cat 5e 24 AWG Bonded-Pairs Stranded TC (7x32) Polyolefin Insulation.030ʺ Industrial Grade Sunlight- and Oil-resistant Black PVC Jacket Stranded 7924A NEC: Flexible u CMR, x x Unshielded CMX Outdoor CEC: CMR FT4 RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151; 5,734,126 and 5,763,823 Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Enhanced Cat 5e 24 AWG Bonded-Pairs Solid BC FEP Insulation Sunlight-, Oil- and Gas-resistant Black FEP Jacket High & Low Tep 7928A NEC: Oil Res I & II u Liited x x Gas Res Cobustible Unshielded FHC 25/50 CMP CEC: CMP FT6 RJ-45 Copatible -70 C U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Cat 5e 24 AWG Solid BC Rip Cord Lengths Polyolefin Insulation.030ʺ Industrial Grade Sunlight- and Oil-resistant Black PVC Jacket Unshielded 7918A NEC: u CMR, CMX- Outdoor CEC: CMR FT4 Rip Cord RJ-45 Copatible -25 C Cold Bend Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Cat 5e 24 AWG Solid BC Overall Beldfoil Shield 24 AWG Stranded TC Drain Wire Unit Wt. Lbs. kg Insulated Conductor OD Polyolefin Insulation.030ʺ Industrial Grade Sunlight- and Oil-resistant Black PVC Jacket Shielded 7919A NEC: (Sae as 7918A above) u CMR, CMX- Outdoor CEC: CMR FT4 RJ-45 Copatible -25 C Cold Bend Shield is bonded to jacket inner wall for electrical stability. Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2, Category 5e Inch Inch OD Freq. (MHz) Max. Atten. (db/ 100) Min. PSUM NEXT (db) Min. PSUM ACR (db/ 100) Min. PSUM ELFEXT (db/ 100) Input Iped. (Ω) 100±12 100±12 100±12 100±12 100±18 100±20 100±22 100±12 100±12 100±12 100±12 100±18 100±20 100±22 100±25 Min. RL (db) Enhanced Cat 6 23 AWG Bonded-Pairs Solid BC Patented E-Spline Center Meber Rip Cord Polyolefin Insulation.030ʺ Industrial Grade Sunlight- and Oil-resistant Black PVC Jacket Unshielded 7927A NEC: u CMR x x CEC: CMR FT4 Rip Cord RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151; 5,734,126; 5,789,711 and 6,297,454-B1 Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2-1, Category 6 *PSUM ACR >0 is guaranteed to 460 MHZ >0* ±12 100±12 100±20 100±22 100±22 100±22 100±22 100± Cat 6 23 AWG Bonded-Pairs Solid BC FEP Insulation Sunlight-, Oil- and Gas-resistant Black FEP Jacket High & Low Tep 7931A NEC: Oil Res I & II u Liited Gas Res Cobustible Unshielded FHC 25/50 CMP CEC: CMP FT ±22 100± RJ-45 Copatible -70 C Cold Bend U.S. Patents 5,606,151 and 5,734,126 Jacket sequentially arked at 2 ft. intervals. Third party verified to TIA/EIA-568-B.2-1, Category 6 ACR = Attenuation Crosstalk Ratio AL = Aluinu BC = Bare Copper TC = Tinned Copper ELFEXT = Equal Level Far-end Crosstalk NEXT = Near-end Crosstalk PSUM = Power Su RL = Return Loss Mylar is a DuPont tradeark. EtherNet/IP is an Open DeviceNet Vendor Association tradeark.

15 15 Industrial Data Solutions Industrial Ethernet Category 6 DataTuff Twisted Pair Cables Heavy-Duty Jackets Enhanced Cat 6 23 AWG Bonded-Pairs Solid BC Rip Cord Polyolefin Insulation PVC Inner Jacket.035ʺ Industrial Grade Black or Gray PVC Outer Jacket Upjacketed 11872A NEC: CM x x x x CEC: Rip Cord CM FT1 Core OD: RJ-45 Copatible -25 C Cold Bend U.S. Patents 5,606,151, 5,734,126 and 5,821,467 x x Jacket sequentially arked at 2 ft. intervals. Verified to TIA/EIA-568-B.2-1, Category *Value provided for inforation only. Enhanced Cat 6 23 AWG Bonded-Pairs Solid BC Mylar Wrap Rip Cord Polyolefin Insulation PVC Inner Jacket.055ʺ Industrial Grade Black or Gray PVC Outer Jacket Interlocked A NEC: (Sae as 11872A above) AL Arour CMG x x CEC: HL Core OD: CMG FT x x Rip Cord UL NEC/ C(UL) CEC Type Pairs Lengths Unit Wt. Lbs. RJ-45 Copatible -40 C U.S. Patents 5,606,151, 5,734,126 and 5,821,467 Jacket sequentially arked at 1 eter intervals. Verified to TIA/EIA-568-B.2-1, Category 6 kg Insulated Conductor OD Inch ACR = Attenuation Crosstalk Ratio AL = Aluinu BC = Bare Copper TC = Tinned Copper ELFEXT = Equal Level Far-end Crosstalk NEXT = Near-end Crosstalk PSUM = Power Su RL = Return Loss Inch OD Freq. (MHz) * 500* Max. Atten. (db/ 100) Min. PSUM NEXT (db) Min. PSUM ACR (db/ 100) Min. PSUM ELFEXT (db/ 100) Input Iped. (Ω) 100±12 100±12 100±12 100±12 100±20 100±22 100±25 100±25 Min. RL (db) Mylar is a DuPont tradeark. Colour Codes: Pair Colour Cobination 1 White/Blue Stripe & Blue 2 White/Orange Stripe & Orange 3 White/Green Stripe & Green 4 White/Brown Stripe & Brown

16 16 Industrial Data Solutions Industrial Ethernet Coaxial Cables UL NEC/ C(UL) CEC Type Lengths Thinnet 10Base2 Ethernet 20 AWG Stranded (19x32).037ʺ Tinned Copper Duobond II + 93% Tinned Copper Braid Shield Foa Polyethylene Insulation Gray PVC Jacket UL AWM 9907 NEC: AWG Duobond II % Style 1354 CL2 U-1000 U (19x32) + 93% (30V 60 C) CM ʺ TC Braid CEC: TC 5.8Ω/Mʹ CM U-2500 U Ω/Mʹ 19.0Ω/k Ω/k DEC Plenu Foa FEP Insulation Gray Fluorocopolyer Jacket Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Core OD Shielding OD Materials Inch DCR Inch For Plenu versions 9907, see or C NEC: AWG Duobond II % CL2P (19x32) + 93% CMP ʺ TC Braid CEC: TC 5.8Ω/Mʹ CMP FT6 8.8Ω/Mʹ 19.0Ω/k RG-58/U Type 28.9Ω/k DEC Suitable for Outdoor and Direct Burial applications. Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Thicknet 10Base5 Ethernet 12 AWG Solid.086ʺ Bare Copper Duobond IV* Quad Shield Foa Polyethylene Insulation Yellow PVC Jacket UL AWM 9880 NEC: AWG Duobond IV % Style 1478 CL (solid) (Duobond II (30V 60 C) CM ʺ + 94% TC Braid CEC: BC + Duoil CM 1.4Ω/Mʹ + 90% TC For Plenu version 9880, 4.7Ω/k Braid) 1.5Ω/Mʹ see DEC Ω/k Ring-band stripes arked every 2.5 eters to aid users in tap placeent. Plenu Foa FEP Insulation Orange Fluorocopolyer Jacket 150 C NEC: AWG Duobond IV % CL2P (solid) (Duobond II CMP ʺ + 90% TC Braid CEC: BC + Duoil CMP FT6 1.4Ω/Mʹ + 90% TC 4.7Ω/k Braid) DEC Ω/Mʹ Ring-band stripes arked every 2.5 eters to aid users in tap placeent. 5.0Ω/k Suitable for Outdoor and Direct Burial applications. BC = Bare Copper DCR = DC Resistance TC = Tinned Copper * Duobond IV = Duobond II + 94% tinned copper braid + Duoil + 90% tinned copper braid. (Plenu version is Duobond II + 90% tinned copper braid + Duoil + 90% tinned copper braid.) Spools and/or UnReel cartons are one piece, but length ay vary ±10% fro length shown

17 17 Industrial Data Solutions Industrial Twinax Blue Hose Cables 78 Oh 20 AWG Stranded (7x28).038ʺ Tinned Copper Beldfoil + 55% Tinned Copper Braid Shield (100% Shield Coverage) Polyethylene Insulation Blue Sunlight-resistant PVC Jacket (Colour Code: Clear, Blue) Blue Hose 9463 NEC: AWG Beldfoil % UL AWM CM CL2 U-500 U (7x28) +55% Style 2464 CEC: ʺ TC Braid (300V 80 C) CM U-1000 U Tinned 4.1Ω/Mʹ Copper 13.4Ω/k Ω/Mʹ Ω/k Z- Fold Allen-Bradley P/N 1770-CD P-7K-SC MSHA* 1000 ft. and 6000 ft. put-ups also available in Brown, Orange or Violet ft. put-up available in Brown, Orange or Violet only. Polyethylene Insulation Blue Low Soke, Zero Halogen Jacket (Colour Code: Clear, Blue) 300V 80 C 9463NH IEC 332-3C AWG Beldfoil % BS (7x28) 55% ʺ TC Braid Tinned 4.1Ω/Mʹ Copper 13.5Ω/k 9.5Ω/Mʹ 31.2Ω/k Z- Fold Polyethylene Insulation Blue Low Soke, Zero Halogen Jacket Steel Wire Arour (Colour Code: Clear, Blue) 300V 80 C 9463LS IEC 332-3C AWG Beldfoil 78 66% BS (7x28) 55% ʺ TC Braid Tinned 4.1Ω/Mʹ Copper 13.5Ω/k Ω/Mʹ 31.2Ω/k Z- Fold Polyethylene Insulation Blue Sunlight-resistant LDPE Jacket (Colour Code: Clear, Blue) Flooded 9463DB AWG Beldfoil % Direct Burial u (7x28) +55% Blue Hose.038ʺ TC Braid 300V 80 C Tinned 4.1Ω/Mʹ Copper 13.4Ω/k 9.5Ω/Mʹ 31.0Ω/k Z- Fold Allen-Bradley P/N 1770-CD UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. Conductor (stranding) Diaeter DCR Shielding OD Core OD Materials Inch DCR Inch 78 Oh 20 AWG Stranded (42x36).038ʺ Tinned Copper Overall Beldfoil + 85% Tinned Copper Braid Shield (100% Coverage) Polyethylene Insulation Blue Sunlight-resistant PVC Jacket (Colour Code: Clear, Blue) kg Under Arour Over Arour High-Flex 9463F NEC: AWG Beldfoil % Blue Hose u CM CL (42x36) +85% UL AWM CEC:.038ʺ TC Braid Style 2464 CM Tinned 5.0Ω/Mʹ (300V 60 C) Copper 6.4Ω/k 9.5Ω/Mʹ 31.0Ω/k Ip. (Ω) Vel. Prop. CPE jacket optional. Capacitance pf/ pf/ MHz Attenuation db/ db/ Allen-Bradley P/N 1770-CD P-7K-SC MSHA* 78 Oh 20 AWG Stranded (7x28).038ʺ Tinned Copper Overall Beldfoil + 56% Tinned Copper Braid Shield (100% Coverage) Plenu FEP Insulation Blue FEP Jacket (Colour Code: Clear, Blue) High NEC: AWG Beldfoil % Teperature u CMP CL2P (7x28) +56% Blue Hose CEC:.038ʺ TC Braid 300V 200 C CMP FT6 Tinned 4.1Ω/Mʹ Copper 13.4Ω/k 9.5Ω/Mʹ 31.0Ω/k Z- Fold Allen-Bradley P/N 1770-CD DCR = DC Resistance FEP = Fluorinated Ethylene-propylene LDPE = Low-density Polyethylene TC = Tinned Copper *Pennsylvania Departent Environental Resources and United States Mine Safety and Health Adinistration Certification

18 18 Industrial Data Solutions Industrial Twinax Blue Hose and Other Twinaxial Cables 78 Oh 20 AWG Stranded (7x28) Tinned Copper Overall Beldfoil + 55% Tinned Copper Braid Shield (100% Coverage) Aluinu Interlocked Arour PE Insulation Blue Sunlight-resistant PVC Outer Jacket* (Colour Code: Clear, Blue) Aluinu NEC: AWG Beldfoil Core: 78 66% Aroured u CMG CL (7x28) +55% Blue Hose CEC:.038ʺ TC Braid 300V 60 C CM, Tinned 4.1Ω/Mʹ Arour: CMG FT4, Copper 13.4Ω/k HLBCD 9.5Ω/Mʹ (Haz Loc) 31.0Ω/k *Blue PVC inner jacket. Allen-Bradley P/N 1770-CD Steel Interlocked Arour PE Insulation Blue Sunlight-resistant PVC Outer Jacket* (Colour Code: Clear, Blue) Steel NEC: AWG Beldfoil Core: 78 66% Aroured u CMG CL (7x28) +55% Blue Hose CEC:.038ʺ TC Braid 300V 60 C CM, Tinned 4.1Ω/Mʹ Arour: CMG FT4, Copper 13.4Ω/k HLBCD 9.5Ω/Mʹ (haz loc) 31.0Ω/k *Blue PVC inner jacket. Allen-Bradley P/N 1770-CD Continuously Corrugated AL Arour PE Insulation Blue Sunlight-resistant PVC Outer Jacket* (Colour Code: Clear, Blue) Continuously NEC: AWG Beldfoil Core: 78 66% Aroured u PLTC (7x28) +55% Blue Hose.038ʺ TC Braid 300V 60 C Tinned 4.1Ω/Mʹ Arour: Copper 13.4Ω/k Ω/Mʹ 31.0Ω/k *Blue PVC inner jacket. Allen-Bradley P/N 1770-CD UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Core OD Shielding OD Materials Inch DCR Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Oh 20 AWG Stranded (7x28).038ʺ Tinned Copper 93% Tinned Copper Braid Shield Polyethylene Insulation Blue PVC Jacket (Colour Code: Clear, Blue) UL AWM 9272 NEC: AWG % % Style 2092 CM U-500 U (7x28) TC Braid (300V 60 C) CEC: ʺ Shield CM U-1000 U Tinned 3.4Ω/Mʹ Copper 11.2Ω/k 9.5Ω/Mʹ 31.0Ω/k For Plenu version 9272, see CPE jacket optional Oh RG-22B/U Type 18 AWG Stranded (7x26) Bare Copper (2) Tinned Copper Braids (95% Coverage) Polyethylene Insulation Black Non-containating PVC Jacket 80 C AWG % VW (7x26) TC Braid.046ʺ 95% BC Shield 6.6Ω/Mʹ.9Ω/Mʹ CPE jacket optional. 21.5Ω/k 3.0Ω/k conductor has tinned center strand. AL = Aluinu BC = Bare Copper DCR = DC Resistance PE = Polyethylene TC = Tinned Copper

19 19 Industrial Data Solutions Industrial Twinax Twinaxial Cables 100 Oh 20 AWG Stranded (7x28).037ʺ One Tinned, One Bare Copper Duoil + 86% Tinned Copper Braid Shield (100% Shield Coverage) Polyethylene Insulation Black PVC Jacket 75 C 9207 NEC: AWG Duoil % CMG CL2 U-500 U (7x28) + 86% IBM P/N UL NEC/ C(UL) CEC Type Lengths Unit Weight CEC: ʺ TC Braid CMG FT TC 2.5Ω/Mʹ BC 8.2Ω/k Ω/Mʹ Ω/k Polyethylene Insulation Black Low Soke, Zero Halogen Jacket Lbs. kg Conductor (stranding) Diaeter DCR Shielding OD Core OD Materials Inch DCR Inch For Plenu version 9207, see CPE jacket optional. 80 C 9207NH IEC AWG Duoil % BS (7x28) + 85% ʺ TC Braid 1 TC 2.0Ω/Mʹ 1 BC 6.6Ω/k 9.5Ω/Mʹ 31.2Ω/k Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Oh 25 AWG Stranded (7x33).021ʺ Tinned Copper Beldfoil (100% Shield Coverage) Stranded Tinned Copper Drain Wire Polyethylene Insulation Blue PVC Jacket (Colour Code: Clear, Blue) UL AWM 9271 NEC: AWG % % Style 2092 CM U-500 U (7x33) Beldfoil (300V 60 C) CEC: ʺ Shield CM U-1000 U Tinned 12.0Ω/Mʹ Copper 39.4Ω/k CPE jacket optional. 31.8Ω/Mʹ 104.3Ω/k Shorting Fold Oh 16 AWG Solid.051ʺ Bare Copper Duoil + 90% Tinned Copper Braid Shield (100% Shield Coverage) Foa Polyethylene Insulation Black PVC Jacket (Colour Code: White, Blue) UL AWM 9860 NEC: AWG Duoil % Style 2448 CMX (solid) +90% (30V 60 C) CEC: ʺ TC Braid CMX Bare 1.3Ω/Mʹ Copper 4.3Ω/k CPE jacket optional. 4.2Ω/Mʹ 13.8Ω/k Foa Polyethylene Insulation Black Low Soke, Zero Halogen Jacket (Colour Code: White, Blue) 80 C 9860NH IEC AWG Duoil % BS (solid) 90%.051ʺ TC Braid Bare 1.3Ω/Mʹ Copper 4.3Ω/k 4.2Ω/Mʹ 13.8Ω/k Foa Polyethylene Insulation Black Low Soke, Zero Halogen Jacket Steel Wire Arour (Colour Code: White, Blue) 80 C 9860LS IEC 332-3C AWG Duoil Under Arour % BS (solid) 90% ʺ TC Braid Bare 1.3Ω/Mʹ Over Arour Copper 4.3Ω/k Ω/Mʹ 13.8Ω/k BC = Bare Copper DCR = DC Resistance FEP = Fluorinated Ethylene-propylene TC = Tinned Copper Spools are one piece, but length ay vary ±10% fro length shown.

20 20 Industrial Data Solutions Industrial Twinax Twinaxial Cables and DataTray 600V Twinaxial Cables UL NEC/ C(UL) CEC Type Lengths Unit Weight 150 Oh 22 AWG Stranded (19x34).031ʺ Tinned Copper Duoil (100% Shield Coverage) Stranded Tinned Copper Drain Wire Datalene Insulation Black PVC Jacket (Colour Code: Black, Yellow) Lbs. kg Conductor (stranding) Diaeter DCR Core OD Shielding OD Materials Inch DCR Inch UL AWM 9182 NEC: U-500 U AWG % % Style 2668 CL2X CMX (19x34) Duoil (30V 60 C) CEC: ʺ Shield For Plenu version 9182, VW-1 CMX Tinned 6.3Ω/Mʹ see Copper 20.7Ω/k 14.0Ω/Mʹ 45.9Ω/k Dual version: YR41609 CPE jacket optional. Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Datalene Insulation Black Low Soke, Zero Halogen Jacket (Colour Code: Black, Yellow) 300V 80 C 9182NH IEC AWG % % BS (19x34) Duoil ʺ Shield Tinned 6.3Ω/Mʹ Copper 20.7Ω/k 14.0Ω/Mʹ 45.9Ω/k Plenu Foa FEP Insulation Black FEP Jacket (Colour Code: Black, Yellow) NEC: AWG % % CMP (19x34) Duoil CL2P ʺ Shield CEC: Tinned 6.3Ω/Mʹ CMP FT6 Copper 20.7Ω/k 14.0Ω/Mʹ 45.9Ω/k AWG Stranded (7x26) Tinned Copper Overall Beldfoil + 55% Tinned Copper Braid Shield (100% Coverage) Flae-retardant Polyolefin Insulation Dark Blue Sunlight-resistant PVC Jacket (Colour Code: White, Blue) UL Type TC 3072F NEC: AWG Beldfoil % V 75 C CMG, ITC (7x26) +55% TC, PLTC ʺ TC Braid Z-Fold P-MSHA-C-7K-1827* CEC: Tinned (100% CMG FT Copper Shield) Ω/Mʹ 3.2Ω/Mʹ 22.7Ω/k 10.4Ω/k UL Type TC 3073F NEC: AWG Beldfoil % V 75 C CMG, ITC (7x26) +55% TC, PLTC ʺ TC Braid CEC: Tinned (100% CMG FT4 Copper Shield) 6.9Ω/Mʹ 2.9Ω/Mʹ 22.7Ω/k 9.6Ω/k Z-Fold UL Type TC 3074F NEC: AWG Beldfoil % V 75 C CMG, ITC (7x26) +55% TC, PLTC ʺ TC Braid CEC: Tinned (100% CMG FT4 Copper Shield) 6.9Ω/Mʹ 2.8Ω/Mʹ 22.7Ω/k 9.1Ω/k Z-Fold For CPE jacketed version order YM CPE jacket optional. CPE jacket optional. CPE jacket optional BC = Bare Copper DCR = DC Resistance FEP = Fluorinated Ethylene-propylene TC = Tinned Copper if conductor, or Tray Cable if NEC rating. Spools are one piece, but length ay vary ±10% fro length shown. *Pennsylvania Departent Environental Resources and United States Mine Safety and Health Adinistration certification.

21 21 Industrial Data Solutions Industrial Coax ControlNet Quad Shielded Coax ControlNet is a high-speed serial counication syste for counication between devices that require tie-critical application exchange. UL NEC/ C(UL) CEC Type RG-6/U Type 18 AWG Solid Bare Copper-covered Steel Duobond IV* Quad Shield Foa Polyethylene Insulation PVC Jacket (Black or Intrinsically Safe Blue) 3092A NEC: AWG Duobond IV % CL2R CMR (solid) Quad CEC: ʺ Shield 91.8Ω/k CMG FT BCCS 3.6Ω/Mʹ 28.0Ω/Mʹ 11.8Ω/k Sweep tested 5 MHz to 50 MHz. CPE jacket optional ft. put-up available in Black only. For Rockwell authorized Flexible ControlNet order YR28890 (Tinned Copper Braid version). Plenu Foa FEP Insulation Fluorocopolyer Jacket (Black or Intrinsically Safe Blue ) 150 C 3093A NEC: AWG Duobond IV % CMP (solid) Quad CEC: ʺ Shield CMP FT6 BCCS 3.6Ω/Mʹ 28.0Ω/Mʹ 11.8Ω/k 91.8Ω/k Sweep tested 5 MHz to 50 MHz. Blue available as standard in 1000 ft. only. Suitable for Outdoor and Direct Burial applications. RG-6/U Type 20 AWG Stranded (105x40) Bare Copper Duobond IV* Quad Shield Foa Polyethylene Insulation PVC Jacket (Black or Intrinsically Safe Blue) High-Flex 3092F NEC: AWG Duobond IV % u CL2 CM (105x40) Quad CEC:.040ʺ Shield 10.5Ω/Mʹ CM Bare 3.6Ω/Mʹ Copper 11.8Ω/k Sweep tested 5 MHz to 400 MHz. CPE jacket optional. 34.4Ω/k IEEE MAP/IEEE Mini-MAP. Lengths BCCS = Bare Copper-covered Steel DCR = DC Resistance Unit Weight Lbs. Conductor (stranding) Diaeter DCR *Duobond IV Quad Shield = Duobond II Foil + 60% aluinu braid + Duoil + 40% aluinu braid. kg Core OD Shielding OD Materials Inch DCR Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ ControlNet is a ControlNet International tradeark.

22 22 Industrial Data Solutions Industrial Coax ControlBus Quad Shielded Coax UL NEC/ C(UL) CEC Type RG-6/U Type 20 AWG Stranded (105x40) Bare Copper Duobond IV* Quad Shield Foa Polyethylene Insulation PVC Jacket (Black or Intrinsically Safe Blue) High-Flex 3092F NEC: AWG Duobond IV % u CL2 CM (105x40) Quad CEC:.040ʺ Shield 10.5Ω/Mʹ CM Bare 3.6Ω/Mʹ Copper 11.8Ω/k Sweep tested 5 MHz to 400 MHz. CPE jacket optional. 34.4Ω/k IEEE MAP/IEEE Mini-MAP. Lengths RG-6/U Type 18 AWG Solid Bare Copper-covered Steel Duobond IV* Quad Shield Foa Polyethylene Insulation Gray PVC Jacket 3131A NEC: AWG Duobond IV % CL2R CMR (solid) Quad CEC:.040ʺ Shield 91.8Ω/k CMR FT4 BCCS 3.6Ω/Mʹ 28.0Ω/Mʹ 11.8Ω/k Sweep tested 5 MHz to 400 MHz. CPE jacket optional. IEEE MAP/IEEE Mini-MAP. Tap arks every 2.6 eters to aid users in installation. Plenu Foa FEP Insulation Gray Fluorocopolyer Jacket 150 C 3132A NEC: AWG Duobond IV % CMP (solid) Quad CEC:.040ʺ Shield CMP FT6 BCCS 3.6Ω/Mʹ 28.0Ω/Mʹ 11.8Ω/k 91.8Ω/k Sweep tested 5 MHz to 400 MHz. IEEE MAP/IEEE Mini-MAP. Tap arks every 2.6 eters to aid users in installation. Suitable for Outdoor and Direct Burial applications. RG-11/U Type 14 AWG Solid Bare Copper-covered Steel Duobond IV* Quad Shield Foa Polyethylene Insulation Gray PVC Jacket 3094A NEC: AWG Duobond IV % CL2R CMR (solid) Quad CEC: ʺ Shield 36.1Ω/k CMG FT4 BCCS 1.8Ω/Mʹ 11.0Ω/Mʹ 5.9Ω/k Sweep tested 5 MHz to 400 MHz. CPE jacket optional. IEEE MAP Tap arks every 2.6 eters to aid users in installation. Unit Weight Plenu Foa FEP Insulation Gray Fluorocopolyer Jacket Lbs. Conductor (stranding) Diaeter DCR 150 C 3095A NEC: AWG Duobond IV % CMP (solid) Quad CEC:.064ʺ Shield CMP FT6 BCCS 1.8Ω/Mʹ 11.0Ω/Mʹ 5.9Ω/k 36.1Ω/k Sweep tested 5 MHz to 400 MHz. IEEE MAP Tap arks every 2.6 eters to aid users in installation. Suitable for Outdoor and Direct Burial applications. BCCS = Bare Copper-covered Steel DCR = DC Resistance FEP = Fluorinated Ethylene-propylene *Duobond IV Quad Shield = Duobond II Foil + 60% aluinu braid + Duoil + 40% aluinu braid. Spools are one piece, but length ay vary ±10% fro length shown. kg Core OD Shielding OD Materials Inch DCR Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/

23 23 Industrial Data Solutions Industrial Data DataBus ISA/SP-50 Fieldbus* or Pribus Cables Fieldbus is a standardized digital counications protocol that enables a siple pair wires to power and carry the counication signals between field devices and a control roo. Pribus is one the largest open industrial fieldbus networks in the world. Fieldbus*/Pribus PA 18 AWG Stranded (7x26) Tinned Copper Beldfoil (100% Shield Coverage) Tinned Copper Drain Wire Polyolefin Insulation Orange or Blue PVC Jacket (Colour Code: Blue, Orange) Type A 3076F NEC: AWG 100% % V 75 C PLTC CM (7x26) Beldfoil KHz (31.25 KBits/sec) ITC ʺ Shield CEC: Tinned 7.5Ω/Mʹ CM Copper 24.6Ω/k 7.3Ω/Mʹ 24.0Ω/k Shorting Fold Fieldbus: Orange jacket. Pribus PA: Intrinsically Safe Blue jacket. Polyolefin Insulation Orange or Blue Low Soke, Zero Halogen Jacket (Colour Code: White, Black) 300V 80 C 3076ENH IEC 332-3C AWG 100% % BS (7x26) Beldfoil.048ʺ Shield Tinned 7.9Ω/Mʹ Copper 26.0Ω/k 6.3Ω/Mʹ 20.5Ω/k Shorting Fold Polyolefin Insulation Black or Blue Low Soke, Zero Halogen Jacket Steel Wire Arour (Colour Code: White, Black) 300V 80 C 3076ELS IEC 332-3C AWG 100% % BS (7x26) Beldfoil ʺ Shield Tinned 7.9Ω/Mʹ Copper 26.0Ω/k Ω/Mʹ 20.5Ω/k Shorting Fold UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Core OD Shielding Materials DCR OD Inch Inch Under Arour Over Arour Ip. (Ω) Vel. Prop. CPE jacket optional. Capacitance pf/ pf/ MHz Attenuation db/ 100 db/ Fieldbus* 22 AWG Stranded (7x30) Tinned Copper Beldfoil (100% Shield Coverage) Tinned Copper Drain Wire Polyolefin Insulation Orange PVC Jacket (Colour Code: Blue, Orange) Type B 3077F NEC: AWG 100% % V 75 C PLTC CM (7x30) Beldfoil KHz (31.25 KBits/sec) ITC.030ʺ Shield CEC: Tinned 11.4Ω/Mʹ CM Copper 37.4Ω/k 17.1Ω/Mʹ 56.0Ω/k Shorting Fold Polyolefin Insulation Orange or Blue Low Soke, Zero Halogen Jacket (Colour Code: White, Black) 300V 80 C 3077ENH IEC 332-3C AWG 100% % BS (7x30) Beldfoil.030ʺ Shield Tinned 10.9Ω/Mʹ Copper 41.5Ω/k 16.0Ω/Mʹ 52.5Ω/k Shorting Fold Polyolefin Insulation Black or Blue Low Soke, Zero Halogen Jacket Steel Wire Arour (Colour Code: White, Black) 300V 80 C 3077ELS IEC 332-3C AWG 100% % BS (7x30) Beldfoil ʺ Shield Tinned 10.9Ω/Mʹ Copper 41.5Ω/k Ω/Mʹ 52.5Ω/k Shorting Fold DCR = DC Resistance BC = Bare Copper TC = Tinned Copper *Capacitance Unbalance not per ISA/SP-50 Fieldbus Under Arour Over Arour CPE jacket optional

24 24 Industrial Data Solutions Industrial Data DataBus ISA/SP-50 Fieldbus* or Pribus Cables Fieldbus* 22 AWG Stranded (7x30) Tinned Copper Beldfoil (100% Shield Coverage) Tinned Copper Drain Wire Cellular Polyolefin Insulation Orange PVC Jacket (Colour Code: Blue, Orange) High Speed 3078F NEC: AWG 100% % V 75 C PLTC CM (7x30) Beldfoil 1 MHz (1.0 & 2.5 MBits/sec) CEC: ʺ Shield CM Tinned 3.3Ω/Mʹ Copper 11.1Ω/k 17.1Ω/Mʹ 56.0Ω/k CPE jacket optional. Shorting Fold UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Core OD Shielding OD Materials Inch DCR Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Pribus DP 22 AWG Solid Bare Copper Beldfoil + 65% Tinned Copper Braid Shield (100% Shield Coverage) Cellular Polyolefin Insulation Chroe or Violet PVC Jacket (Colour Code: Red, Green) 300V 75 C 3079A NEC: AWG Beldfoil % PLTC CMG (solid) + 65% CEC: ʺ TC Braid CMG FT4 Bare Shield Sieens Sinec L2 cable. Copper (100% 16.0Ω/Mʹ Coverage) 52.5Ω/k 3.9Ω/Mʹ 12.8Ω/k For CPE jacketed version order YR Cellular Polyolefin Insulation Purple Low Soke, Zero Halogen Jacket (Colour Code: Red, Green) 300V 80 C 3079ANH IEC 332-3C AWG Beldfoil % BS (solid) 65% ʺ TC Braid Bare Shield Copper 3.9Ω/Mʹ 15.9Ω/Mʹ 12.8Ω/k 52.2Ω/k Cellular Polyolefin Insulation Black PVC Jacket Steel Wire Arour (Colour Code: Red, Green) 300V 80 C 3079ALS IEC 332-3C AWG Beldfoil Under Arour % BS (solid) 65% ʺ TC Braid Bare Shield Over Arour Copper (100% Ω/Mʹ Coverage) 52.0Ω/k 3.9Ω/Mʹ 12.8Ω/k Pribus DP 22 AWG Stranded Bare Copper Beldfoil + 65% Tinned Copper Shield (100% Shield Coverage) Cellular Polyolefin Insulation Purple PVC Jacket (Colour Code: Red, Green) 300V 80 C 3079E IEC 332-3C AWG Beldfoil % BS (solid) 65% ʺ TC Braid Bare Shield Copper 3.9Ω/Mʹ 15.9Ω/Mʹ 12.8Ω/k 52.2Ω/k DCR = DC Resistance TC = Tinned Copper *Capacitance Unbalance not per ISA/SP-50 Fieldbus For HSE, see Industrial Ethernet Section for copper and fiber cables.

25 25 Industrial Data Solutions Industrial Data DeviceBus for ODVA DeviceNet DeviceNet is an open industrial network standard that addresses all kinds field devices. It allows interchangeability siple devices and total direct connectivity larger, ore coplex counication links. Features and Benefits Data and power in one cable Reduced cable and installation costs Twisted and shielded for noise iunity (round versions) Easier connectivity (flat versions) Fully copliant with ODVA specs DeviceNet Counications Rate Table Counications Rate 3082A 3082F 3082K 3083A Maxiu Distance 3084F 125 Kbps Kbps Kbps A/3085A 7895A 7896A 7897A 7900A UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Shielding Materials DCR Colour Code OD Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ V Class 1 Thick 15 and 18 AWG Stranded Tinned Copper 100% Individually Foil Shielded + Overall 65% TC Braid Drain Wire* PVC/Nylon Insulation (Power) FEP Insulation (Data) Lt. Gray Sunlight/Oil-resistant PVC Jacket High Velocity 7897A NEC: (2)15 AWG TC 100% Power Pair: Thick u TC (19x28) Individual Red/Black 600V 75 C Ω/Mʹ Foil 11.8Ω/k + Overall (2)18 AWG TC 65% Data Pair: Data: (19x30) TC Braid Blue/White 75% 6.9Ω/Mʹ 1.8Ω/Mʹ *18 AWG stranded (19x30) tinned copper drain wire. 22.6Ω/k 5.7Ω/k Meter arks on jacket to aid users in installation. 600V Class 1 ODVA Cable V 16 and 18 AWG Stranded Tinned Copper 100% Individually Foil Shielded + Overall 65% TC Braid Drain Wire* PVC/Nylon Insulation (Power) F-R Polypropylene Insulation (Data) Lt. Gray Sunlight/Oil-resistant PVC Jacket Open Wiring 7896A NEC: (2)16 AWG TC 100% Power Pair: V 75 C u TC (19x29) Individual Red/Black Ω/Mʹ Foil 16.1Ω/k + Overall (2)18 AWG TC 65% Data Pair: Data: (19x30) TC Braid Blue/White 64% C(UL) AWM I/II A/B 6.9Ω/Mʹ 1.8Ω/Mʹ *18 AWG stranded (19x30) tinned copper drain wire. 22.6Ω/k 5.7Ω/k Meter arks on jacket to aid users in installation. 600V Class 1 ODVA Cable IV 16 and 18 AWG Stranded Tinned Copper Unshielded PVC/Nylon Insulation (Power) F-R Polypropylene Insulation (Data) Lt. Gray Sunlight/Oil-resistant PVC Jacket Drop 7900A NEC: (2)16 AWG TC Unshielded Power Pair: V 75 C u TC (19x29) Red/Black 4.9Ω/Mʹ 16.1Ω/k (2)18 AWG TC Data Pair: Data: (19x30) Blue/White 64% 6.9Ω/Mʹ 22.6Ω/k Meter arks on jacket to aid users in installation. DCR = DC Resistance FEP = Fluorinated Ethylene-propylene F -R = Flae-retardant- -TC = Tinned Copper if conductor, or Tray Cable if NEC rating. ODVA DeviceNet is an Open DeviceNet Vendor Association, Inc. tradeark

26 26 Industrial Data Solutions Industrial Data DeviceBus for ODVA DeviceNet UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Shielding Materials DCR Colour Code OD Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ V Class 2 Thick 15 and 18 AWG Stranded Tinned Copper 100% Individually Foil Shielded + Overall 65% TC Braid Drain Wire* PVC Insulation (Power) FPE Insulation (Data) Lt. Gray Sunlight/Oil-resistant PVC Jacket Thick 3082A NEC: (2)15 AWG TC 100% Power Pair: C u CMG, PLTC (19x28) Individual Red/Black CEC: Ω/Mʹ Foil CMG FT4 11.8Ω/k + Overall (2)18 AWG TC 65% Data Pair: Data: (19x30) TC Braid Blue/White 75% 6.9Ω/Mʹ 1.8Ω/Mʹ UL AWM C(UL) AWM I/II A 22.6Ω/k 5.9Ω/k *18 AWG stranded (19x30) tinned copper drain wire. Meter arks on jacket to aid users in installation. High-Flex 3082F NEC: (2)15 AWG TC 100% Power Pair: Thick u CMG, PLTC (65x33) Individual Red/Black 75 C CEC: Ω/Mʹ Foil CMG FT4 11.8Ω/k + Overall (2)18 AWG TC 65% Data Pair: Data: (65x36) TC Braid Blue/White 75% 6.9Ω/Mʹ 1.8Ω/Mʹ UL AWM C(UL) AWM I/II A 22.6Ω/k 5.9Ω/k *18 AWG stranded (65x36) tinned copper drain wire. Meter arks on jacket to aid users in installation. PVC Insulation (Power) FPE Insulation (Data) Yellow CPE Jacket Thick 3083A NEC: (2)15 AWG TC 100% Power Pair: C CMG, PLTC (19x28) Individual Red/Black CEC: 3.6Ω/Mʹ Foil CMG FT4 11.8Ω/k + Overall (2)18 AWG TC 65% Data Pair: Data: (19x30) TC Braid Blue/White 75% 6.9Ω/Mʹ 1.8Ω/Mʹ *18 AWG stranded (19x30) tinned copper drain wire. 22.6Ω/k 5.9Ω/k Meter arks on jacket to aid users in installation. DCR = DC Resistance FPE = Foa Polyethylene -TC = Tinned Copper if conductor, or Tray Cable if NEC rating ODVA DeviceNet is an Open DeviceNet Vendor Association, Inc. tradeark.

27 27 Industrial Data Solutions Industrial Data DeviceBus for ODVA DeviceNet UL NEC/ C(UL) CEC Type Lengths Unit Weight 300V Class 2 Thin 22 and 24 AWG Stranded Tinned Copper 100% Individually Foil Shielded + Overall 65% TC Braid Drain Wire* PVC Insulation (Power) FPE Insulation (Data) Lt. Gray Sunlight/Oil-resistant PVC Jacket Thin 3084A NEC: (2)22 AWG TC 100% Power Pair: C CL2 CMG (154x44) Individual Red/Black CEC: Ω/Mʹ Foil CMG FT4 57.4Ω/k + Overall (2)24 AWG TC 65% Data Pair: Data: (105x44) TC Braid Blue/White 75% C(UL) AWM I/II A 28.0Ω/Mʹ 3.2Ω/Mʹ *22 AWG stranded (19x34) tinned copper drain wire. 91.9Ω/k 10.5Ω/k Meter arks on jacket to aid users in installation. High-Flex 3084F NEC: (2)22 AWG TC 100% Power Pair: Thin u CL2 CMG (154x44) Individual Red/Black 75 C CEC: Ω/Mʹ Foil CMG FT4 57.4Ω/k + Overall (2)24 AWG TC 65% Data Pair: Data: (105x44) TC Braid Blue/White 75% C(UL) AWM I/II A 28.0Ω/Mʹ 3.2Ω/Mʹ *22 AWG stranded (26x36) tinned copper drain wire. 91.9Ω/k 10.5Ω/k Meter arks on jacket to aid users in installation. PVC Insulation (Power) FPE Insulation (Data) Yellow CPE Jacket Lbs. kg Conductor (stranding) Diaeter DCR Shielding Materials DCR Thin 3085A NEC: (2)22 AWG TC 100% Power Pair: C CL2 CMG (154x44) Individual Red/Black CEC: Ω/Mʹ Foil CMG FT4 57.4Ω/k + Overall (2)24 AWG TC 65% Data Pair: Data: (105x44) TC Braid Blue/White 75% 28.0Ω/Mʹ 3.2Ω/Mʹ *22 AWG stranded (19x34) tinned copper drain wire. 91.9Ω/k 10.5Ω/k Meter arks on jacket to aid users in installation. 300V Class 2 ODVA Cable III 20 and 18 AWG Stranded TC 100% Individually Foil Shielded + Overall 65% TC Braid Drain Wire* OD PVC Insulation (Power) FPE Insulation (Data) Lt. Gray Sunlight/Oil-resistant PVC Jacket Mid 7895A NEC: (2)20 AWG TC 100% Power Pair: C u CMG PLTC (19x32) Individual Red/Black CEC: 10.9Ω/Mʹ Foil CMG FT4 35.8Ω/k + Overall (2)18 AWG TC 65% Data Pair: Data: (19x30) TC Braid Blue/White 75% UL AWM Ω/Mʹ 3.2Ω/Mʹ *20 AWG stranded (19x32) tinned copper drain wire. 22.6Ω/k 10.5Ω/k Meter arks on jacket to aid users in installation. Colour Code Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Flat 16 AWG Stranded (19x29) Tinned Copper Unshielded PVC Insulation (Power) FPE Insulation (Data) Lt. Gray Sunlight-resistant PVC Jacket Class K NEC: (4)16 AWG TC Unshielded Power Pair: V 75 C u CMG CL (19x29) Red/Black x x PLTC Ω/Mʹ CEC: 16.1Ω/k CMG FT4 Data Pair: Data: Blue/White 75% PVC Insulation Black Sunlight-resistant PVC Jacket Class KP NEC: (4)16 AWG TC Unshielded Red/Black, Power u CMG, ITC, (19x29) Blue/White x x 600V 75 C PLTC, TC Ω/Mʹ CEC: 16.1Ω/k CMG FT4 DCR = DC Resistance FPE = Foa Polyethylene- -F-R = Flae-retardant- -TC = Tinned Copper if conductor, or Tray Cable if NEC rating. ODVA DeviceNet is an Open DeviceNet Vendor Association, Inc. tradeark.

28 28 Industrial Data Solutions Industrial Data DeviceBus for Honeywell Sart Distributed Syste 22 AWG Stranded Tinned Copper Each Pair Individually Beldfoil Shielded PVC Insulation (Power) Cellular PE Insulation (Data) Dark Gray PVC Jacket UL AWM 3087A NEC: (4)22 AWG 100% Power Pair: Style 2464 CL (19x34) Beldfoil Blue/Brown 30V 80 C CEC: ʺ Each Pair CSA AWM Ι/ΙΙ A FT1 Tinned Copper Data Pair: Data: 17.5Ω/Mʹ Black/White 76% 57.4Ω/k Micro Cable (Drop) UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Shielding Materials DCR Colour Code OD Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ and 20 AWG Stranded Tinned Copper Each Pair Individually Beldfoil Shielded PVC Insulation (Power) Cellular PE Insulation (Data) Dark Gray PVC Jacket UL AWM 3086A NEC: (2)16 AWG TC 100% Power Pair: Style 2464 CL (19x29) Beldfoil Blue/Brown 30V 80 C CEC:.067ʺ Each Pair CSA AWM Ι/ΙΙ A FT1 3.6Ω/Mʹ 11.8Ω/k (2)20 AWG TC Data Pair: Data: (19x32) Black/White 76%.041ʺ 10.0Ω/Mʹ 32.8Ω/k Mini Cable (Trunk) DCR = DC Resistance TC = Tinned Copper

29 29 Industrial Data Solutions Industrial Data DeviceBus for Square D/Seriplex UL NEC/ C(UL) CEC Type Lengths 18 and 22 AWG Stranded Tinned Copper Overall 100% Beldfoil Shield 22 AWG Drain Wire Foa HDPE Insulation (Power) Foa HDPE Insulation (Data) Orange PVC Jacket 150V 75 C 3124A NEC: (2)18 AWG 100% Power Pair: CL2 CM (16x30) Overall Red/Black CEC:.040ʺ TC Beldfoil CM 6.8Ω/Mʹ Shield 21.3Ω/k 10.7Ω/Mʹ (2)22 AWG 35.1Ω/k Data Pair: Data: (7x30) White/Green 78%.030ʺ TC 18.1Ω/Mʹ 59.4Ω/k 16 and 22 AWG Stranded Tinned Copper Overall 100% Beldfoil Shield 22 AWG Drain Wire Foa HDPE Insulation (Power) Foa HDPE Insulation (Data) Orange PVC Jacket 150V 75 C 3125A NEC: (2)16 AWG 100% Power Pair: CL2 CM (26x30) Overall Red/Black CEC:.060ʺ TC Beldfoil CM 4.5Ω/Mʹ Shield 14.8Ω/k 10.0Ω/Mʹ (2)22 AWG 32.8Ω/k Data Pair: Data: (7x30) White/Green 78%.030ʺ TC 18.1Ω/Mʹ 59.4Ω/k 16, 22 and 12 AWG Stranded Tinned Copper Overall 100% Beldfoil Shield 22 AWG Drain Wire Foa HDPE Insulation (Control) Foa HDPE Insulation (Data) PVC Insulation (Power) Orange PVC Jacket 150V 75 C 3126A NEC: (2)16 AWG 100% Control Pair: CL2 CM (26x30) Overall Red/Black x x CEC:.060ʺ TC Beldfoil CM 4.5Ω/Mʹ Shield 14.8Ω/k 9.5Ω/Mʹ (2)22 AWG 31.2Ω/k Data Pair: Data: (7x30) White/Green 78%.030ʺ TC 18.1Ω/Mʹ 59.4Ω/k (2)12 AWG Power Pair: (65x30) Black/White,.090ʺ TC Red/White 1.8Ω/Mʹ 5.9Ω/k DCR = DC Resistance HDPE = High-density Polyethylene- -TC = Tinned Copper Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Shielding Materials DCR Colour Code OD Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ Square D/Seriplex is a Square D/Schneider AEG tradeark.

30 30 Industrial Data Solutions Industrial Data DeviceBus for Phoenix Contact InterBus -S UL NEC/ C(UL) CEC Type Lengths 18 and 24 AWG Stranded Tinned Copper Overall 100% Beldfoil Shield + 90% Tinned Copper Braid PVC Insulation (Power) PE Insulation (Data) Green Polyurethane Jacket Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Shielding Materials DCR UL AWM Style A (3)18 AWG 100% Power: (300V 80 C) (7x24) Overall Red, Blue,.060ʺ TC Beldfoil Green w/ 3.7Ω/Mʹ + 90% Yellow Stripe 12.1Ω/k TC Braid (3pr)24 AWG 2.7Ω/Mʹ Data: Data: (7x32) 8.9Ω/k White/Brown, 66%.024ʺ TC Pink/Gray, 24.0Ω/Mʹ Yellow/Green 78.7Ω/k Colour Code OD Inch Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ 24 AWG Stranded Tinned Copper Overall 100% Beldfoil Shield + 90% Tinned Copper Braid PE Insulation Green Polyurethane Jacket UL AWM Style A (3pr)24 AWG 100% White/Brown, % (300V 80 C) (7x32) Overall Pink/Gray, TC Beldfoil Yellow/Green 24.0Ω/Mʹ + 90% 78.7Ω/k TC Braid 2.7Ω/Mʹ 8.9Ω/k DCR = DC Resistance TC = Tinned Copper InterBus-S is a Phoenix Contact tradeark.

31 31 Industrial Data Solutions Industrial Data EIA Industrial RS-485 PLTC/CM, HART, CAN 22 AWG Stranded (7x30) Tinned Copper Twisted Pairs Overall 100% Beldfoil Shield + 90% TC Braid 22 AWG Stranded TC Drain Wire Datalene Insulation Black UV Resistant PVC Jacket (CPE jacket optional) Oil Res II 3105A NEC: 1 See Ω/Mʹ 2.9Ω/Mʹ % V CM PLTC Chart Ω/k 9.5Ω/k For CPE jacketed version CEC: Below order YR44345 CM FT1 DCR = DC Resistance TC = Tinned Copper UL NEC/ C(UL) CEC Type Colour Lengths Code Pairs 3106A NEC: 1.5 See Ω/Mʹ 2.8Ω/Mʹ % CM PLTC Chart Ω/k 9.2Ω/k For CPE jacketed version CEC: Below order YR46721 CM FT1 3107A NEC: 2 See Ω/Mʹ 1.4Ω/Mʹ % CM PLTC Chart Ω/k 4.6Ω/k For CPE jacketed version CEC: Below order YR46792 CM FT1 3108A NEC: 3 See Ω/Mʹ 1.4Ω/Mʹ % CM PLTC Chart Ω/k 4.6Ω/k For CPE jacketed version CEC: Below order YR45287 CM FT1 3109A NEC: 4 See Ω/Mʹ 1.1Ω/Mʹ % CM PLTC Chart Ω/k 3.6Ω/k For CPE jacketed version CEC: Below order YR44768 CM FT1 * Capacitance between conductors. ** Capacitance between one conductor and other conductors connected to shield. All conductors are under the braid shield; one pair is under the Beldfoil shield. Unit Weight Lbs. kg Cond. DCR Shield OD Inch Ip. (Ω) Vel. Prop. * pf/ Capacitance * pf/ ** pf/ ** pf/ Colour Code Chart Pair Colour Cobination 1 White/Blue Stripe Blue/White Stripe 2 White/Orange Stripe Orange/White Stripe 3 White/Green Stripe Green/White Stripe 4 White/Brown Stripe Brown/White Stripe

32 32 Industrial Data Solutions Industrial Data CC-Link Cables UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR 20 AWG Stranded Bare Copper Conductors Beldfoil Shield + 78% TC Braid Shield 22 AWG Stranded TC Drain Wire Foaed High Density Polyethylene Insulation Red PVC Jacket (Colour Code: Blue, White and Yellow) 60 C YR47205 NEC CM Con % % CEC CM ductor Beldfoil 20 AWG 78% (7x28) TC Braid Bare Copper Core OD Shielding OD Materials Inch DCR Inch Shield 11.0Ω/Mʹ 36.1Ω/k Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Power Liited Tray Cable 20 AWG Stranded Bare Copper Conductors Beldfoil Shield + 78% TC Braid Shield 22 AWG Stranded TC Drain Wire, PVC Inner Jacket, 18 AWG Stranded BC Power Pairs, Polypropylene Fillers Data Pairs: Foaed High Density Polyethylene Insulation (Colour Code: Blue, White and Yellow) Power Pairs: PVC Insulation Red UV Resistant PVC Jacket (Colour Code: White and Black) 105 C YR47198 NEC PLTC, CM Con Data Pairs: % CEC CM ductor 100% 20 AWG Beldfoil + (7x28) 78% Bare Copper TC Braid Shield 2 Conductor Power Pairs: 18 AWG Unshielded (7x26) Bare Copper 36.1Ω/k DCR = DC Resistance BC = Bare Copper TC = Tinned Copper

33 33 Industrial Data Solutions LonWorks Cables 22 AWG Solid Bare Copper Twisted Pairs Foa Polyethylene Insulation White Low Soke, Zero Halogen Jacket (Colour Code: White/Blue, Blue/White) 80 C UL NEC/ C(UL) CEC Type Lengths Unit Weight Lbs. kg Conductor (stranding) Diaeter DCR Core OD Shielding OD Materials Inch DCR Inch 7701NH IEC 332-3C AWG % BS (solid).025ʺ 16.8Ω/Mʹ 55.0Ω/k Ip. (Ω) Vel. Prop. Capacitance pf/ pf/ MHz Attenuation db/ db/ Foa Polyethylene Insulation White Low Soke, Zero Halogen Jacket (Colour Code: White/Blue, Blue/White; Orange/White, White/Orange) 80 C 7702NH IEC 332-3C AWG % BS 7655 (solid).025ʺ 16.8Ω/Mʹ 55.0Ω/k AWG Solid Bare Copper Twisted Pairs Overall 100% Beldfoil Shield 24 AWG Stranded Tinned Copper Drain Wire Foa Polyolefin Insulation White Low Soke, Zero Halogen Jacket (Colour Code: White/Blue, Blue/White) 80 C 7703NH IEC 332-3C AWG % % BS 7655 (solid) Beldfoil.025ʺ 10.4Ω/Mʹ 16.8Ω/Mʹ 34.0Ω/k 55.0Ω/k Foa Polyethylene Insulation White Low Soke, Zero Halogen Jacket (Colour Code: White/Blue, Blue/White; Orange/White, White/Orange) 80 C 7704NH IEC 332-3C AWG % % BS (solid) Beldfoil ʺ 5.2Ω/Mʹ 16.8Ω/Mʹ 17.0Ω/k 55.0Ω/k DCR = DC Resistance

34 34 Overall Foil/Braid Shield EIA RS-485 Applications, CAN Plenu-Rated and Non-Plenu UL NEC/ C(UL) CEC Type Colour Lengths Code Pairs 24 AWG Stranded (7x32) Tinned Copper Twisted Pairs Overall 100% Beldfoil + 90% TC Braid Shield 24 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket Unit Weight Lbs. UL AWM Style NEC: 1 See Ω/Mʹ 3.4Ω/Mʹ % (30V 80 C) CM Chart Ω/k 11.0Ω/k CEC: (Tech Info For Plenu versions 9841, CM Section) see or kg Cond. DCR Shield OD Inch Ip. (Ω) Vel. Prop. * pf/ Capacitance * pf/ ** pf/ ** pf/ Polyethylene Insulation Chroe Low Soke, Zero Halogen Jacket 80 C 9841NH IEC 332-3C 1 See Ω/Mʹ 3.4Ω/Mʹ % BS 7655 Chart Ω/k 11.0Ω/k (Tech Info Section) Polyethylene Insulation Black Low Soke, Zero Halogen Jacket Steel Wire Arour 80 C 9841LS IEC 332-3C 1 See Ω/Mʹ 3.4Ω/Mʹ Under Arour % BS 7655 Chart Ω/k 11.0Ω/k (Tech Info Section) Over Arour Polyethylene Insulation Chroe PVC Jacket UL AWM Style NEC: 2 See Ω/Mʹ 2.2Ω/Mʹ % (30V 80 C) CM Chart Ω/k 7.2Ω/k CEC: (Tech Info For Plenu versions 9842, CM Section) see Polyethylene Insulation Chroe Low Soke, Zero Halogen Jacket 80 C 9842NH IEC 332-3C 2 See Ω/Mʹ 2.2Ω/Mʹ % BS 7655 Chart Ω/k 7.2Ω/k (Tech Info Section) Polyethylene Insulation Black Low Soke, Zero Halogen Jacket Steel Wire Arour 80 C 9842LS IEC 332-3C 2 See Ω/Mʹ 2.2Ω/Mʹ Under Arour % BS 7655 Chart Ω/k 7.2Ω/k (Tech Info Section) Over Arour Polyethylene Ins Polyethylene Insulation Chroe PVC Jacket UL AWM Style NEC: 3 See Ω/Mʹ 2.3Ω/Mʹ % (30V 80 C) CM Chart Ω/k 7.7Ω/k CEC: (Tech Info CM Section) Polyethylene Insulation Chroe Low Soke, Zero Halogen Jacket 80 C 9843NH IEC 332-3C 3 See Ω/Mʹ 2.2Ω/Mʹ % BS 7655 Chart Ω/k 7.2Ω/k (Tech Info Section) Polyethylene Insulation Chroe PVC Jacket UL AWM Style NEC: 4 See Ω/Mʹ 2.1Ω/Mʹ % (30V 80 C) CM Chart Ω/k 6.9Ω/k CEC: (Tech Info CM Section) DCR = DC Resistance TC = Tinned Copper * Capacitance between conductors. ** Capacitance between one conductor and other conductors connected to shield.

35 35 Industrial Data Solutions Interconnect Cable Shielded Twisted Pair Cables 24 AWG Stranded (7x32) Tinned Copper Twisted Pairs Individually Shielded with 100% Beldfoil 24 AWG Stranded TC Drain Wire Datalene Insulation Chroe PVC Jacket UL AWM Style NEC: 2 See Ω/Mʹ 18.0Ω/Mʹ % (300V 60 C) CM Chart Ω/k 59.1Ω/k CEC: (Tech Info CM Section) For Plenu version 9729, see or Z-Fold UL NEC/ C(UL) CEC Type Colour Lengths Code Pairs Unit Weight Datalene Insulation Black PVC Low Soke, Zero Halogen Jacket Lbs. 300V 80 C 9729NH IEC 332-3C 2 See Ω/Mʹ 18.0Ω/Mʹ % BS 7655 Chart Ω/k 59.1Ω/k (Tech Info Section) kg Cond. DCR Shield OD Inch Ip. (Ω) Vel. Prop. * pf/ Capacitance * pf/ ** pf/ ** pf/ Z-Fold Datalene Insulation Black PVC Low Soke, Zero Halogen Jacket Steel Wire Arour 300V 80 C 9729LS IEC 332-3C 2 See Ω/Mʹ 18.0Ω/Mʹ % BS 7655 Chart Ω/k 59.1Ω/k (Tech Info Section) Z-Fold Under Arour Over Arour 22 AWG Stranded (7x30) Tinned Copper Twisted Pairs Individually Shielded with 100% Beldfoil 22 AWG Stranded TC Drain Wire Polypropylene Insulation Chroe PVC Jacket UL AWM Style NEC: 3 See Ω/Mʹ 10.6Ω/Mʹ % (30V 80 C) CM Chart Ω/k 34.8Ω/k CEC: (Tech Info U-500 U CM Section) U-1000 U Z-Fold Polypropylene Insulation Chroe Low Soke, Zero Halogen Jacket For Plenu versions 8777, see 88777, or V 80 C 8777NH IEC 332-3C 3 See Ω/Mʹ 10.6Ω/Mʹ % BS 7655 Chart Ω/k 34.8Ω/k (Tech Info Section) Z-Fold Polypropylene Insulation Black Low Soke, Zero Halogen Jacket Steel Wire Arour Under Arour 300V 80 C 8777LS IEC 332-3C 3 See Ω/Mʹ 10.6Ω/Mʹ 50 66% BS 7655 Chart Ω/k 34.8Ω/k (Tech Info Section) Over Arour Z-Fold DCR = DC Resistance TC = Tinned Copper * Capacitance between conductors. ** Capacitance between one conductor and other conductors connected to shield.

36 36 Industrial Data Solutions Interconnect Cable Shielded Twisted Pair Cables UL NEC/ C(UL) CEC Type Colour Lengths Code Pairs Unit Weight 22 AWG Stranded (7x30) Tinned Copper Twisted Pairs Individually Shielded with 100% Beldfoil 24 AWG Stranded TC Drain Wire Polypropylene Insulation Chroe PVC Jacket (Pairs Cabled on Coon Axis to Reduce Diaeter) Lbs. 300V RMS 60 C 8723 NEC: 2 Red/Black, Ω/Mʹ 16.6Ω/Mʹ % CM Green/White U-500 U Ω/k 54.5Ω/k CEC: CM U-1000 U U-2000 U Polypropylene Insulation Chroe Low Soke, Zero Halogen Jacket (Pairs Cabled on a Coon Axis to Reduce Diaeter) 300V 80 C 8723NH IEC 332-3C 2 Red/Black Ω/Mʹ 16.6Ω/Mʹ % BS 7655 Green/White Ω/k 54.5Ω/k kg Cond. DCR Shield OD Inch Ip. (Ω) Vel. Prop. * pf/ Capacitance * pf/ ** pf/ For Plenu versions 8723, see 88723, or ** pf/ Polypropylene Insulation Black Low Soke, Zero Halogen Jacket (Pairs Cabled on a Coon Axis to Reduce Diaeter) Steel Wire Arour Under Arour 300V 80 C 8723LS IEC 332-3C 2 Red/Black Ω/Mʹ 16.6Ω/Mʹ 45 66% BS 7655 Green/White Ω/k 54.5Ω/k Over Arour Plenu FEP Insulation Red FEP Jacket (Pairs Cabled on Coon Axis to Reduce Diaeter) 300V RMS, Non-conduit NEC: 2 Red/Black, Ω/Mʹ 16.6Ω/Mʹ % CMP Green/White Ω/k 54.5Ω/k CEC: CMP FT6 Z-Fold 18 AWG Stranded Conductors (16x30) Tinned Copper Twisted Pair Overall 100% Beldfoil Shield 20 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket UL AWM Style NEC: 1 Black, (300V 60 C) CM Clear U-500 U CEC: CM U-1000 U Shorting Fold Polyethylene Insulation Chroe Low Soke, Zero Halogen Jacket For Plenu versions 8760, see 88760, or V 80 C 8760NH IEC 332-3C 1 Black, Ω/Mʹ % BS 7655 Clear Ω/k Shorting Fold Polyethylene Insulation Black Low Soke, Zero Halogen Jacket Steel Wire Arour Under Arour 300V 80 C 8760LS IEC 332-3C 1 Black, Ω/Mʹ 60 66% BS 7655 Clear Ω/k Shorting Fold Over Arour DCR = DC Resistance TC = Tinned Copper * Capacitance between conductors. ** Capacitance between one conductor and other conductors connected to shield.

37 37 VFD (Variable Frequency Drive) Cable 1000V UL Flexible Motor Supply Cable VFD cables carry the power fro AC drive systes to AC otors and are designed to withstand harsh operating environents characterized by high voltage spikes, high noise levels and adverse environental conditions. AWG Cond. Stranding Lengths Unit Wt. OD Maxiu Pull Tension Miniu Bend Radius Lbs. kg Inch Lbs. N Inch 4-conductor (3) Stranded TC Signals + (1) Full-sized Ground Overall Beldfoil + 85% TC Braid Shield Full Sized TC Drain Wire* XLPE Insulation Black Sunlight-resistant PVC Jacket (ICEA Method 4 Colour Code: Black and Nubered, Green Ground) 1000V UL x Flexible Motor Supply Cable V UL 1277 Type TC V CSA AWM Ι/ΙΙ A/B FT Open Wiring per NEC Article x C Wet/Dry x x x19x x19x x19x x19x XHHW-2, RHW-2 rated singles Suitable for Direct Burial applications TC = Tinned Copper if conductor, or Tray Cable if NEC rating. XLPE = Cross-linked Polyethylene *Drain wire and ground wire are the sae AWG size as conductor.

38 38 Belden CDT Infinity Flexible Autoation Cable Overview and Application Guide Belden CDT Infinity is a coplete line control, data, video, and power cables specifically designed to handle the rigorous speeds and near-constant otion encountered in autoated equipent such as robots, pick and place achines, autoatic handling systes, ulti-axis achine tools, and conveyor systes. When the application deands highly flexible cables fering exceptional cable life and perforance, specify Belden CDT Infinity. Belden CDT Infinity Means More Perforance And Longer Life Reduced Cable Meory Belden CDT Infinityʼs unique design, including no central core conductor, and neutralized cabling, results in cables that are relaxed, with alost no eory. Greater Flex Life Belden CDT Infinity cables fer superior flexibility and are able to handle the vigorous otions and high speeds encountered in autoated equipent. Greater Syste Uptie Belden CDT Infinity cables cobine specialized anufacturing techniques with precision copper stranding and rugged insulation and jack-eting copounds to axiize flex life and reliability. No Talc Probles Unlike the potentially harful talc used in other cables, Belden CDTʼs non-toxic, non-irritating slipper copound facilitates flexing and also coplies with OSHA regulations. Itʼs safer for eploy-ees and operators and is less likely to containate solder joints or echanical copounds. CE Confority All Belden CDT Infinity cables are CE arked per the Conforité Européenne low voltage directive, allowing trade product in Europe. Custo Designs Other designs available upon request. Product Series s C-TC+ The C-TC+ series is designed for C-track and extree flex applications up to 9 illion flex cycles*. This series utilizes super fine stranding and soe the tightest lay lengths allowed by UL, providing outstanding flex life. FCC The FCC series is a cost effective alternative for C-track and oderate flexing applications rated up to 1 illion flex cycles*. Flex Data Cables Belden CDT Infinity Flex Data cables are designed for industrial applications where precise data transission is cobined with high-flexing. These cables are ideal for effective operation coputer controlled equipent or other autoated production processes, even in harsh environents. Flex Vision Belden CDT Infinity Vision cables are continuous flex video cables designed for achine vision applications. They are ideal for otioncontrolled video and with inspection and easureent equipent. Application Guide For a coplete listing Belden CDT Infinity Flexible Autoation Cables, please visit www. beldencdt.co or contact our Technical Support Service +31(0) Belden CDT Infinity Series C-Track Systes Multi- Axis Machining Robotics Autoated Assebly Systes Material Handling Systes Pick & Place Systes Autoated Storage Retrieval Gantry Systes Machine Vision Motion- Controlled Video Inspection & Measure Equip. Festooning Servo Power FCC Oil & abrasion resistant 600V UL & CSA rated Life Expectancy: Over 1 illion flex cycles* C-TC+ Oil & abrasion resistant 600V UL & CSA rated Life Expectancy: Over 9 illion flex cycles* DATA Oil & abrasion resistant 300V UL & CSA rated Life Expectancy: Over 1 illion flex cycles* VISION Abrasion resistant 30V UL & CSA rated Life Expectancy: Over 1 illion flex cycles* Satisfactory Superior Supree *Based on Belden CDT recoended installation guidelines.

39 39 Instruentation Cable 300V Power-Liited Tray Cables Overview Construction St annealed bare or tinned copper with PVC flae retardant insulation and jacket. Other insulation and jacket options are available (see table below). Counication wire included on all ulti-pair/ulti-triad 1000 and 3000 series part nubers, 22 AWG (7x30) bare copper, orange PVC insulation. Nylon rip cord included in all PVC/PVC instruentation cables. Other Construction Options: Insulation/Jacket Voltage Rating 300 Volts Teperature Rating See table above. UL Listed for PLTC Max. Tep Rating XLPE/PVC 90 C XLPE/CPE 90 C PVC/PVC 105 C PVC/CPE 105 C PE/PVC 75 C FPE/PVC 75 C TPE/TPE 105 C XLPE/Haloarrest I 90 C XLPE/Hypalon 90 C Application These cables are suitable for installation in wet or dry locations. Cable jackets are resistant to sunlight, oisture and vapor penetration. Unshielded Twisted non-shielded pairs and triads provide a inial OD allowing greater tray and conduit fill. Non-shielded instruent pairs ay be utilized when recoended by the instruent anufacturer and used in a etallic conduit. Overall Shield Recoended for use in instruentation applications where signals are transitted in excess 100 illivolts except in areas where high voltage and current sources create excessive noise interference. The Beldfoil shield with drain wire provides 100% coverage for axiu shield effectiveness. Individually Shielded and Overall Shielded Individually shielded pairs or triads with an overall shield are recoended for use in instruentation applications where optiu noise rejection is required. Individual pair/triad shields are fully isolated fro each other and contain a separate drain wire for grounding, to provide axiu protection fro crosstalk and coon ode interference. Cables with an overall shield provide additional electrostatic noise protection. Specifications UL Subject 13 UL Subject 2250 NEC Article 725 Class 2 and Class 3 Circuits NEC Article 727 NEC Type PLTC Listed, which is approved for cable tray use in Class 1, Division 2, hazardous areas and non-hazardous areas, cable trays, raceways, conduit and supported by essenger wires. Sunlight-resistant. NEC Type ITC Listed, which is approved for cable tray use, raceways, hazardous locations according to Articles 501, 502, 503, and 504; or as aerial cable on a essenger, and under raised floors in control roos and rack roos where arranged to prevent daage to the cable. Usages are allowed based on qualified persons servicing all installations. UL 1581 Vertical Tray Flae Test coparable to IEEE 383 (70,000 BTU/ hr.) Flae Test. PVC/PVC Constructions are CEC CMG FT4 and IEEE 1202 rated. Design options call Belden CDT Technical Support +31(0) For a coplete listing Belden CDT 300V Power-Liited Tray Cables, please visit www. beldencdt.co or contact our Technical Support Service +31(0) Hypalon is a DuPont tradeark. lengths ay be subject to tolerance. Custo lengths ay be available upon request. Contact the Belden CDT Technical Support +31(0)

40 40 Instruentation Cable Therocouple Extension Cables and Therocouple Wire Overview Construction Therocouple Extension Cable Conductor aterial deterined by the therocouple extension wire type. FEP or PVC insulated with FEP or PVC jacket. Nylon rip cord included in all therocouple extension cables except high-teperature FEP jacketed cables. Counication wire included on all ulti-pair, non-fep constructions 22 AWG (7x30) bare copper orange PVC insulation. NOTE: The teperature ranges in Table A are applicable only to the therocouple conductors and not to the cable. The cable ust never be exposed to teperatures higher than the axiu teperature ratings shown in Table B. Table B: Other Insulation/Jacket Options Insulation/Jacket UL Listed for PLTC Max. Tep Rating XLPE/PVC 90 C XLPE/CPE 90 C PVC/PVC 105 C PVC/CPE 105 C PE/PVC 75 C FPE/PVC 75 C TPE/TPE 105 C XLPE/Haloarrest I 90 C FEP/FEP 200 C Application Unshielded Parallel non-shielded extension wire ay be utilized in low noise environents when recoended by the instruent anufacturer. Overall Shield Recoended, except in areas where high voltage and current sources create excessive noise interference. The Beldfoil shield with drain wire provides 100% coverage for axiu shield effectiveness. Individually Shielded Individually shielded pairs are recoended for use in applications where optiu noise rejection is required. PVC Insulated, PVC Jacketed Cable Specifications UL Subject 13 UL 1581 Vertical Tray Flae Test coparable to IEEE 383 (70,000 BTU) Flae Test ANSI/MC NEC CMG NEC Type PLTC Listed, which is approved for cable tray use in Class 1, Division 2, hazardous areas and non-hazardous areas, cable trays, raceways, conduit and supported by essenger wires. NEC Type ITC Listed, which is approved for cable tray use, raceways hazardous locations according to Articles 501, 502, 503 and 504; or as aerial on a cable essenger, and under raised floors in control roos and rack roos where arranged to prevent daage to the cable. Usages are allowed based on qualified persons servicing all installations. PVC/PVC constructions are CEC CMG FT4 and IEEE 1202 rated. UL 1277 TC versions approved for use in Class 1 trays available as special. Shielded Twisted Pair (FEP insulated, FEP jacketed cable specifications) UL Subject 13 UL 910 Steiner Tunnel Flae Test coparable to FT6 Flae Test ANSI/MC NEC Type CL3P/PLTC Listed, which is approved for use in ducts, plenus and other space used for environental air. UL 1277 TC versions approved for use in Class 1 trays available as special. Therocouple Wire Conductor aterial deterined by the therocouple type. FEP insulated and jacketed flat constructions. FEP therocouple wire is ipervious to cheical attack and is flae retardant. Table A: Therocouple Identification and Liits Error Reference Junction 0 C* ANSI Sybol Teperature Range ( C) Liits Error ( C) Jacket Colour Insulation Colour Code Positive ( + ) Negative ( - ) Conductor Identification Positive ( + ) Negative ( - ) E 0 to 340 ±1.7 C Brown Purple Red Chroel Constantan 340 to 540 ±.50% Non-agnetic Silver Colour J 0 to 293 ±2.2 C Brown White Red Iron Constantan 293 to 480 ±.75% Magnetic Non-agnetic K 0 to 293 ±2.2 C Brown Yellow Red Chroel Aluel 293 to 980 ±.75% Non-agnetic Magnetic T 0 to 133 ±1.0 C Brown Blue Red Copper Constantan 133 to 260 ±.75% Copper Colour Non-agnetic EX 0 to 200 ±1.7 C Purple Purple Red Chroel Constantan JX 0 to 200 ±2.2 C Black White Red Iron Constantan KX 0 to 200 ±2.2 C Yellow Yellow Red Chroel Aluel TX 0 to 100 ±1.0 C Blue Blue Red Copper Constantan Liits error per ANSI MC Liits shown do not include syste or installation error. Percentages refer to the teperature being easured. * The Teperature Range and Liits Error are for standard grade therocouples, Reference ANSI MC for special grade therocouples. The Teperature Ranges for type E, J, K and T therocouple wires listed above pertain to 20 AWG wire. Additional constructions available upon request. For a coplete listing Belden CDT Therocouple Extension Cables and Therocouple Wire, please visit or contact our Technical Support Service +31(0) Chroel and Aluel are Hoskins Manufacturing Copany tradearks. lengths ay be subject to tolerance. Custo lengths ay be available upon request. Contact the Belden CDT Technical Support +31(0)

41 41 Instruentation Cable 600V Tray Cables Overview Construction St annealed bare or tinned copper conductors. PVC insulated with a nylon overcoat, 90 C PVC Jacket, TFN, TFFN or THHN style singles. Nylon rip cord included in all PVC-Nylon/PVC instruentation cables. Tray Cable Construction Options Insulation/Jacket Voltage Rating 600 Volts Teperature Rating See table above. UL Listed for MC and TC Max. Tep Rating Wet Dry Flae Tests PVC Nylon/PVC 75 C 90 C UL 1581 (THHN or THWN) FT4/ 14 AWG & larger IEEE 1202 PVC Nylon/PVC NA 90 C UL 1581 (TFN or TFFN) FT4/ 16 & 18 AWG IEEE 1202 XLPE (XHHW 2)/ 90 C 90 C UL 1581 PVC or CPE FT4/ 14 AWG & larger IEEE 1202 VW-1 rated singles XLPE (RFH 2)/ 75 C 75 C UL 1581 PVC or CPE FT4/ 16 & 18 AWG IEEE 1202 VW-1 rated singles FRPO/PVC 75 C UL AWG & larger TPE/TPE 75 C 90 C UL 1581 FRPO/PVC 75 C 90 C UL 1581 XLPE/Haloarrest I 90 C 90 C UL 1581 (XHHW-2) VW-1 14 AWG & larger rated singles XLPE/Haloarrest I 75 C 75 C UL & 18 AWG (RFH-2) FEP/PVC 90 C 90 C UL 1581 XLPE/Hypalon 90 C 90 C UL 1581 (XHHW-2) VW-1 14 AWG & larger rated singles XLPE/Hypalon 75 C 75 C UL 1581 (RFH-2) VW-1 16 & 18 AWG rated singles Application These cables are suitable for installation in wet or dry locations. Cable jackets are resistant to sunlight, oisture and vapor penetration. The cables can be used in raceways, and (supported by essenger wire), outdoor applications and direct burial applications. Unshielded Twisted non-shielded instruent pairs provide a inial OD allowing greater tray and conduit fill. Non-shielded instruent pairs ay be utilized when recoended by the instruent anufacturer and used in a etallic conduit. Overall Shield Recoended for use in instruentation applications where signals are transitted in excess 100 illivolts except in areas where high voltage and current sources creates excessive noise interference. The Beldfoil shield with drain wire provides 100% coverage for axiu shield effectiveness. Individually Shielded and Overall Shielded Individually shielded pairs or triads with an overall shield are recoended for use in instruentation applications where optiu noise rejection is required. Individual pair/triad shields are fully isolated fro each other and contain a separate drain wire for grounding, to provide axiu protection fro crosstalk and coon ode interference. Cables with an overall shield provide additional electrostatic noise protection. To Specify: 1234 A Start Add or with replace letter code Specifications UL Subject 1277 UL 1581 Vertical Tray Flae Test coparable to IEEE 383 (70,000 BTU/hr.) Flae Test NEC Type TC Listed, which is approved for cable tray use in Class 1, Division 2 areas, per NEC Articles 340, 318 and 501 and for Class 1 circuits as peritted in Article 725 Bare Copper Constructions are NEC Type NPLF Listed, which is approved for use in Non Power Liited Fire Protective Signaling circuits, per NEC Article 760 PVC-Nylon/PVC, XLPE/PVC and XLPE/ CPE constructed cables eet IEEE 1202/FT4 (70,000 BTU) Flae Tests MC Cable Ratings Optional Custoize any 600V TC instruentation cable, with Arour and a full-sized ground. See chart below to specify. To Specify MC Rated Cable A Overall Arour Core Conductor, Jacket Type 4-digit Insulation, Type Inner Jacket 600V TC Type Instruentation Overall Jacket Type Code Material 1 PVC 3 CPE 4 TPE 5 HDPE 6 Oil Res II 7 Haloarrest I Arour Type Code Material 2 Aluinu Interlock 3 Steel Interlock Conductor, Insulation and Jacket Options** Bare Tinned Insulation/Jacket A B PVC-Nylon/PVC C D XLPE/PVC E F FRPO/PVC G H XLPE/TPE K L TPE/TPE M N PVC-Nylon/Oil Res II Q R XLPE/CPE S T XLPE/Haloarrest I **For 1000 and 3000 Series cables only. For a coplete listing Belden CDT 600V Tray Cables, please visit or contact our Technical Support Service +31(0) Hypalon is a DuPont tradeark. lengths ay be subject to tolerance. Custo lengths ay be available upon request. Contact the Belden CDT Technical Support +31(0)

42 42 Control Cable 600V Type TC Cables Overview Introduction Belden CDT fers a wide selection UL-rated 600V Tray Cable for a variety control applications. Multi-conductor versions are available fro 18 to 1 AWG. These are unshielded and shielded versions that coe with various insulation and jacket cobinations. These TC cables are installed in cable trays, ducts and conduit and can be used in direct burial applications. They are extensively used in anufacturing facilities, especially in the process industries such as petrocheical, steel, pulp and paper, ceent and ining. These flexible, space efficient cables can be substantially ore econoical than traditional wiring ethods. Construction St annealed bare or tinned copper conductors, with various insulation and jacketing options as seen in chart below. Tray Cable Construction Options Insulation/Jacket UL Listed for MC and TC Max. Tep Rating Wet Dry Flae Tests PVC Nylon/PVC 75 C 90 C UL 1581 (THHN or THWN) FT4/ 14 AWG & larger IEEE 1202 PVC Nylon/PVC NA 90 C UL 1581 (TFN or TFFN) FT4/ 16 & 18 AWG IEEE 1202 XLPE (XHHW 2)/ 90 C 90 C UL 1581 PVC or CPE FT4/ 14 AWG & larger IEEE 1202 VW-1 rated singles XLPE (RFH 2)/ 75 C 75 C UL 1581 PVC or CPE FT4/ 16 & 18 AWG IEEE 1202 VW-1 rated singles FRPO/PVC 75 C UL AWG & larger TPE/TPE 75 C 90 C UL 1581 FRPO/PVC 75 C 90 C UL 1581 XLPE/Haloarrest I 90 C 90 C UL 1581 (XHHW-2) VW-1 14 AWG & larger rated singles XLPE/Haloarrest I 75 C 75 C UL & 18 AWG (RFH-2) FEP/PVC 90 C 90 C UL 1581 XLPE/Hypalon 90 C 90 C UL 1581 (XHHW-2) VW-1 14 AWG & larger rated singles XLPE/Hypalon 75 C 75 C UL 1581 (RFH-2) VW-1 16 & 18 AWG rated singles Unshielded Cabled non-shielded conductors provide a inial O.D. allowing greater tray and conduit fill. Non-shielded control cable ay be utilized when recoended by the equipent anufacturer and used in a etallic conduit. Overall Shield Recoended for use in control applications where signals are transitted in excess 100 illivolts, except in areas where high voltage and current sources create excessive noise interference. The Beldfoil shield with drain wire provides 100% coverage for axiu shield effectiveness. Only 2-conductor round constructions can be shielded. Flat constructions cannot be shielded. Ground Wire Non-insulated, bare copper ground wires are included for constructions 8 through 2 AWG. Non-insulated, bare copper, full sized ground wires ay be requested on other constructions. All shielded PVC-Nylon/PVC constructions include full sized ground (drain) wires. Colour Code Multi-conductor control cables (10 AWG to 18 AWG) are printed alpha-nuerically in addition to being Colour coded per ICEA Table E2. 8 AWG and larger are black and nubered per ICEA Method 4. Refer to Industrial Technical Inforation for ICEA Colour code charts. Voltage Rating 600 Volt TC Teperature Rating See Tray Cable Construction chart above. Application These cables are suitable for installation in wet or dry locations. Cable jackets are resistant to sunlight, oisture and vapor penetration. The cables can be used in raceways (supported by essenger wire), outdoor applications and direct burial applications. Specifications UL Subject 1277 UL Subject 1424 (per outline for NPLF requireents dated May 3, 1979) UL 1581 Vertical Flae Test coparable to IEEE 383 (70,000 BTU/hr) Flae Test Approved for cable tray use in Class 1, Division 2 areas, per NEC Articles 340, 318 and 501, and for Class 1 circuits as peritted in Article 725 PVC-Nylon/PVC, XLPE/PVC and XLPE/ CPE constructed cables eet IEEE 1202/FT4 (70,000 BTU/hr) Flae Tests For a coplete listing Belden CDT 600V Type TC Cables, please visit or contact our Technical Support Service +31(0) Hypalon is a DuPont tradeark. lengths ay be subject to tolerance. Custo lengths ay be available upon request. Contact the Belden CDT Technical Support +31(0)

43 43 Control Cable 600V Type MC Metal Clad and Teck-Style Cables Overview Metal Clad Interlocked Arour PVC Outer Jacket Teck-Style PVC Outer Jacket Introduction Mylar Wrap Inner Jacket Interlocked Arour XLPE Insulation XLPE Insulation Belden CDT Metal Clad (MC) and Teck-Style cables are designed to eet deanding industrial needs by cobining rugged durability and corrosion resistance with flexibility and easy handling. MC and Teck-Style cables are available in a wide range in-stock and custo constructions to eet the needs pulp and paper, cheical, petroleu and other deanding industrial and resource industry environents. They are ideal for use in wet or dry areas; ventilated, non-ventilated or ladder-type cable troughs; ventilated flexible cableways; and for direct burial. Custo cables are available to eet exacting requireents. Belden CDT Type MC Cable is arked sunlight-resistant for cable tray use in direct burial designations, and cable constructions are listed to NEC Type MC. Teck-Style cables are price-copetitive, high-perforance, UL 1569 certified cables with a flae-retardant XHHW insulated conductor and an inner PVC jacket for echanical oisture and corrosion protection. Construction Class B stranded bare copper conductors, cross-linked polyethylene insulation, bare copper ground wire, standard aluinu or optional galvanized steel interlocking Arour, PVC outer jacket. Theroset insulation XHHW-2 conductors NEC conductor teperature 90 C dry and 90 C wet Voltage Rating 14 AWG 2 AWG: 600 Volt Application Type MC Cable is a general-purpose cable used in the pulp and paper, ining, petroleu and cheical industries as well as in coercial buildings. MC Cable ay be used under the following conditions: Exposed or concealed wiring in dry or wet conditions In ventilated, non-ventilated or ladder-type cable trays in dry or wet conditions On walls or beas Directly buried Class I and II Div. 2 and Class III Div. 1 and 2 hazardous locations Miniu Bending Radius 12 ties the overall cable diaeter Pulling Tensions: The cobined use Kelles grips and pulling eyes is recoended. Design Advantages Insulation Properties High tensile strength Ipact- and crush-resistant Heat-resistant Excellent elongation Moisture-resistant Good low teperature properties 90 C dry and 90 C wet Electrical Properties High insulation resistance Low dielectric loss High dielectric strength Other Features Corrosion-resistant Versatile and flexible Provides cost savings as conduit and ducts are not required Specifications UL 44 UL 1569 UL 1581 (70,000 BTU/hr) Vertical Tray Flae Test Meets IEEE 1202 Flae Test Mylar is a DuPont tradeark. For a coplete listing Belden CDT 600V Type MC Metal Clad and Teck-Style Cables, please visit or contact our Technical Support Service +31(0)

44 44 CSA Control Cable 600V ACIC and Teck90 Cables Overview PVC Outer Jacket Introduction PVC Inner Jacket Interlocked Arour XLPE Insulation Belden CDT Teck90 and ACIC cables are designed to eet deanding industrial needs by cobining rugged durability and corrosion resistance with flexibility and easy handling. Teck90 and ACIC Cables are available in a wide range in-stock and custo constructions to eet the needs pulp and paper, cheical, petroleu and other deanding industrial and resource industry environents. They are ideal for use in wet or dry areas; ventilated, non-ventilated or ladder-type cable troughs; ventilated flexible cableways; and for direct burial. Belden CDT Teck90 Cable is arked with FT4, HL designations, and cable constructions are certified to CSA C22.2#131 and C22.2#174 for use in a wide range hazardous locations. Both inner and outer jackets eet the acid gas evolution requireent 14% axiu required by CSA C22.2#0.3 Clause Custo cables are available upon request. Construction Class B stranded bare copper conductors, cross-link polyethylene insulation, bare copper ground wire, PVC inner jacket, aluinu steel interlocking Arour, PVC outer jacket. Galvanized steel interlocking Arour available as an option. Voltage Rating 18 to 16 AWG 600V ACIC 14 to 8 AWG 600 Volts 14 to 4/0 AWG 1000 Volts Teperature Rating -40 C to 90 C (Dry/Wet) -25 C installed Application Teck90 and ACIC are general-purpose cables used in the pulp and paper, ining, petroleu and cheical industries as well as in coercial buildings. Teck90 and ACIC ay be used under the following conditions: Exposed or concealed wiring in dry or wet conditions In ventilated, non-ventilated or ladder-type cable trays in dry or wet conditions On walls or beas Directly buried CEC Class I, Division I locations Miniu Bending Radius: 12 ties the overall cable diaeter Pulling Tensions The cobined use Kelles grips and pulling eyes is recoended. Design Advantages Insulation Properties High tensile strength Ipact- and crush-resistant Heat-resistant Excellent elongation Moisture-resistant Good low teperature properties Electrical Properties High insulation resistance Low dielectric loss High dielectric strength Other Features Corrosion-resistant Versatile and flexible Provides cost savings as conduit and ducts are not required ACIC has a blue jacket Specifications CSA C22.2#131 CSA C22.2#174 Cables and Cable Glands for Use in Hazardous Locations CSA C22.2#0.3 Clause 4.31 Low Acid Gas CSA C22.2#0.3 Clause Cables with FT4 Marking For a coplete listing Belden CDT 600V ACIC and Teck90 Cables, please visit www. beldencdt.co or contact our Technical Support Service +31(0)

45 T E C H N I C A L I N F O R M A T I O N 45 Aerican Wire Gage (AWG) Equivalency Chart AWG Coposition Conductor Approxiate OD Cross Section Resistance in 2 Ω/1000 ft. Ω/100 AWG Coposition Conductor Approxiate OD Cross Section Resistance in 2 Ω/1000 ft. Ω/ Solid Solid Solid Solid Solid / Solid Solid / Solid Solid / / Solid Solid / / Solid Solid / / Solid / Solid / / / Solid Solid / / / / Solid Solid / / / Solid Solid / / / / / Solid Solid / / / / / Solid Solid / / / / / Solid Solid / / / / Solid Solid / / / / Solid Solid / / / Conversion Table To convert to Metric To convert Metric to in x 25.4 # ft : # i k x lbs kg x lbs/1000 ft kg/k x F C (F-32)/1.8 # # = Exact value = Approxiate value x = ultiply by : = divide by in : 25.4 # ft x # k i x kg lbs x kg/k lbs/1000 ft x C F 1.8 x C + 32 #

46 T E C H N I C A L I N F O R M A T I O N 46 Conductors Current Ratings for Belden CDT Electronic Cables The axiu continuous current rating for an electronic cable is liited by conductor size, nuber conductors contained within the cable, axiu teperature rating the cable, and environental conditions such as abient teperature and air flow. To use the current capacity chart, first deterine conductor size, teperature rating, and nuber conductors fro the applicable product description for the cable interest. Next, find the current value on the chart for the proper teperature rating and conductor size. To calculate the axiu current rating/conductor, ultiply the chart value by the appropriate conductor factor. The chart assues cable is surrounded by still air at an abient teperature 25 C. Current values are in RMS Aperes and are valid for copper conductors only. For conditions other than specified, contact Belden CDT Technical Support at: +31(0) Note: Current ratings are intended as general guidelines for low power electronic counications and control applications. Current ratings for power applications generally are set by regulatory agencies such as UL, CSA, NEC, and others. Current (in Aperes) C Tep. Rise Above Abient 10 C Tep. Rise Above Abient Conductor Size (in AWG) Current Ratings Conductors* Factor to to to to 30.5 *Do not count shields unless used as conductor.

47 T E C H N I C A L I N F O R M A T I O N 47 Shielding Overview Innovative Leadership The evolution technology aintains steady deand for sophisticated cable shielding. Belden CDT eets that deand with innovative shielding and shield effectiveness testing ethods to supply you with high quality, dependable cable. Slot Drain Wire Insulated Conductor Slot Drain Wire With the creation tradearked shield designs and patented test ethods, Belden CDT has earned a reputation for innovation and leadership that is unequaled in the wire and cable industry. In addition, Belden CDT fers the broadest line shielded ulti-conductor, coaxial and flat cable in the industry. Foil Out Insulating Fil Aluinu Figure 1: Foil shield configurations without shorting folds. Foil In Several unique Belden CDT innovations are utilized across a wide range shielding applications: Beldfoil The first aluinu/ polyester foil developed for use as a cable shield. Provides 100% shield coverage for optiu protection. Shorting Fold Drain Wire Isolation Fold Shorting Fold Drain Wire Duoil Consists an aluinupolyester-aluinu lainate wrapped around the cableʼs dielectric core. Provides 100% physical coverage, and iproves shield reliability and flex life. Aluinu Insulating Fil Insulated Conductor Aluinu Insulating Fil Insulated Conductor Belden CDT also utilizes a nuber innovative techniques to apply shielding to ulti-conductor and paired cables: French Braid Shields Belden CDTʼs patented French Braid shield is a double spiral (double serve bare copper shield) with the two spirals tied together by one weave. Figure 2: Foil shield configuration with shorting fold. Shorting Fold Belden CDT uses a shorting fold technique to aintain etal-to-etal contact for iproved high frequency perforance. Without the shorting fold, a slot is created through which signals can leak and cause interference. (See Figures 1 and 2 above.) Figure 3: Foil shield with Z-Fold reduces crosstalk in ulti-pair applications. Z-Fold Belden CDT iproves on the traditional shorting fold by eploying a Z-Fold designed for use in ulti-pair applications to reduce crosstalk. The Z-Fold (see Figure 3) cobines an isolation and a shorting fold. The shorting fold provides etal-to-etal contact while the isolation fold keeps shields fro shorting to one another in ulti-pair, individually shielded cables. The use either a shorting fold or a Z-Fold increases the foil shieldʼs range effectiveness to higher frequencies. Belden CDT s patented French Braid shield.

48 T E C H N I C A L I N F O R M A T I O N 48 Shielding Characteristics Belden CDT Shield Types Foil Shields Foil shields consist aluinu foil lainated to a polyester or polypropylene fil. The fil gives the shield echanical strength and bonus insulation. Foil shields provide 100% cable coverage, necessary for electrostatic shield protection. Because their sall size, foil shields are coonly used to shield individual pairs ulti-pair data cables to reduce crosstalk. They have less weight, bulk and cost less than spiral or braid shields and are generally ore effective than braid shields in RF ranges. Foil shields are ore flexible than braid but have a shorter flex life than spiral or braid. Drain wires are used with foil shields to ake terination easier and to ground electrostatic discharges. The shortcoings in using the foil shield include higher DC resistance and lower echanical strength than braid or spiral shields. Braid Shields A braid shield consists groups tinned or bare copper or aluinu strands, one set woven in a clockwise direction and interwoven with another set in a counterclockwise direction. Braid shields provide superior structural integrity, while aintaining good flexibility and flex life. These shields are ideal for iniizing low frequency interference and have lower DC resistance than foil. Braid shields are effective at audio, as well as RF ranges. Generally, the higher the braid coverage, the ore effective the shield. However, the trade-f between cost and braid coverage ust be considered. Typical braid coverages are between 80% and 95%. Coverage 100% is unattainable with a braid shield. Other features to consider when choosing a braid shield are the weave angle, strand diaeter, nuber carriers (strand groups) and the nuber ends (strands). Braid shields are generally bulkier and heavier than other shields and, in soe cases, harder to terinate because the braid ust be cobed out and pigtailed. Spiral/Serve Shields A spiral/serve shield consists wire (usually copper) wrapped in a spiral around the inner cable core. Superior flexibility and flex life, ease terination and up to 97% coverage are the advantages spiral shields. They are best suited for audio applications. As a rule, spiral shields are not effective above the audio frequency range due to the coil effect produced by the inductance served wire strands. French Braid Shields Belden CDTʼs patented French Braid shield is a double spiral (double serve bare copper shield) with the two spirals tied together by one weave. This construction provides iproved flex life over standard spiral shields, iproved flexibility over conventional braid shields, and lower levels icrophonic or triboelectric noise than either spiral or conventional braid shields. Cobination Shields Cobination shields consist ore than one layer shielding. They provide axiu shield efficiency across the frequency spectru. The cobination foil/braid shield cobines the advantages 100% foil coverage, plus the strength and low DC resistance the braid. Belden CDT has also developed a nuber shielding configurations for use with broadband coaxial cables. Duobond Duobond is essentially the sae construction as Duoil (a lainated tape foil/fil/foil), but with an extra layer adhesive bonding the foil shield to the dielectric core. This foil shield provides 100% coverage and insures axiu shield protection. Duobond II (Foil/Braid) Cobines Duobond with an outer braid, applied for greater protection against interference and to increase the overall tensile strength. Duobond III (Tri-Shield) Utilizes the Duobond II design (foil/ braid) plus a surrounding layer Duoil. The extra foil layer iproves shield reliability and provides an additional interference barrier. Duobond Plus Features foil/braid/foil construction with a shorting fold in the outerost foil. This fold prevents a slot opening Shorting Fold fro being created in the shield, thereby preventing signal egress or ingress. Duobond IV (Quad Shield) Offers an extra layer braid shield (foil/ braid/foil/braid) for iproved strength and durability. Other cobination shields are available such as the foil/braid/foil/braid used on the Ethernet cables, braid/braid or foil/spiral.

49 T E C H N I C A L I N F O R M A T I O N 49 Shielding and Arouring Shield Types Application Guide and Relative Cost Coparison Table 9: Relative Cost Coparison Shield Types Table 10: Shield Perforance Ratings Shield Types Application Guide Choose a Foil Shield For protection against capacitive (electric field) coupling where shield coverage is ore iportant than low DC resistance. When possible sources interference include TV signals, crosstalk fro other circuits, radio transitters, fluorescent lights or coputing equipent. Table 9: Relative Cost Coparison Relative cost coparisons are based on coaxial cable. Chart shows relative shield cost as one coponent the total cost the cable. These cost ratings ay change depending on the physical construction the cable. 5 Arouring Belden CDTʼs innovative technology delivers axiu effectiveness to eet the perforance requireents a wide range applications. Belden CDT also has the capability to protect electronic, instruentation, and control cables with interlocking steel or aluinu Arour and cables with Verlok inner jackets. For MATV, CATV, video, networking, coputer I/O cables in fice, industrial or coercial environents where abient EMI levels are low. Choose a Braid Shield For superior perforance against diffusion coupling, where low DC resistance is iportant, and to a lesser extent, capacitive and inductive coupling Braid Spiral Foil Foil/Braid Duobond Plus Interlocking Traditional Arouring available in steel or aluinu. Verlok Cables with Verlok inner jackets feature extruded ribs on the cable jacket to ensure a strong echanical grip between the Arour and jacket. Cables with Verlok jackets can replace steel wire Aroured cables in any ining, coercial, and industrial applications. When possible sources interference exhibit low ipedance characteristics, such as otor control circuits and switches which operate inductive loads. For coputer to terinal interconnect for process, instruentation or control applications. Choose a Spiral Shield For functional shielding against diffusion and capacitive coupling at audio frequencies only. When possible sources interference are power lines and fluorescent lights. For applications when flexibility and flex life are ajor concerns, such as icrophone and audio cables and retractile cords. Choose a Cobination Shield For shielding against high frequency radiated eissions coupling and ESD. Cobines the low resistance braid and 100% coverage foil shields. When possible sources interference include radio transitters, TV stations, printed circuit boards, back planes, otor control circuits and coputing equipent. For Video, CATV, MATV, networking, coputer I/O cables and coputeraided anufacturing applications. Table 10: Shield Perforance Coparison Chart Frequency Range and Types Interference Anticipated Frequency: DC Braid (95% Coverage) Capacitive A AA AAA AAA AAA Diffusion AAA A C AAA AAA Diffusion/Inductive Diffusion/Inductive/Capacitive Frequency: 15 khz Capacitive A AA AAA AAA AAA Diffusion AAA B C AAA AAA Diffusion/Inductive AA C A AA AAA Diffusion/Inductive/Capacitive Frequency: 10 MHz to 1000 MHz Capacitive A AA AAA AAA AAA Diffusion Diffusion/Inductive B C A AA AAA Diffusion/Inductive/Capacitive B C A AA AAA * Although ratings shown in Table 10 are based on shielded coaxial cable test results, these ratings also pertain to shielded ulti-conductor and flat cable where shield types are available. Note: Shield effectiveness decreases as frequency increases. Therefore, ratings in one frequency category do not iply equal shield effectiveness in other frequency categories. Verlok is a patent and tradeark United Wire and Cable Canada, Inc. Cable Shield Ratings* Spiral Foil Foil/Braid Shield Rating Key AAA AA A B C Best Foil/Braid/Foil Duobond Plus Better Good Functional Unsatisfactory Not Applicable

50 T E C H N I C A L I N F O R M A T I O N 50 Belden CDT Colour Code Charts Colour Code Chart 3 for Paired Cables (Belden CDT ) Pair Colour Cobination Pair Colour Cobination Pair Colour Cobination Pair Colour Cobination 1 Black & Red 11 Red & Yellow 21 White & Brown 31 Purple & White 2 Black & White 12 Red & Brown 22 White & Orange 32 Purple & Dark Green 3 Black & Green 13 Red & Orange 23 Blue & Yellow 33 Purple & Light Blue 4 Black & Blue 14 Green & White 24 Blue & Brown 34 Purple & Yellow 5 Black & Yellow 15 Green & Blue 25 Blue & Orange 35 Purple & Brown 6 Black & Brown 16 Green & Yellow 26 Brown & Yellow 36 Purple & Black 7 Black & Orange 17 Green & Brown 27 Brown & Orange 37 Gray & White 8 Red & White 18 Green & Orange 28 Orange & Yellow 9 Red & Green 19 White & Blue 29 Purple & Orange 10 Red & Blue 20 White & Yellow 30 Purple & Red Colour Code Chart 5 for Paired Cables (Western Electric ) Pair Colour Cobination Pair Colour Cobination Pair Colour Cobination Pair Colour Cobination Pair Colour Cobination 1 White/Blue Stripe & Blue/White Stripe 6 Red/Blue Stripe & Blue/Red Stripe 11 Black/Blue Stripe & Blue/Black Stripe 16 Yellow/Blue Stripe & Blue/Yellow Stripe 21 Purple/Blue Stripe & Blue/Purple Stripe 2 White/Orange Stripe & Orange/White Stripe 7 Red/Orange Stripe & Orange/Red Stripe 12 Black/Orange Stripe & Orange/Black Stripe 17 Yellow/Orange Stripe & Orange/Yellow Stripe 22 Purple/Orange Stripe & Orange/Purple Stripe 3 White/Green Stripe & Green/White Stripe 8 Red/Green Stripe & Green/Red Stripe 13 Black/Green Stripe & Green/Black Stripe 18 Yellow/Green Stripe & Green/Yellow Stripe 23 Purple/Green Stripe & Green/Purple Stripe 4 White/Brown Stripe & Brown/White Stripe 9 Red/Brown Stripe & Brown/Red Stripe 14 Black/Brown Stripe & Brown/Black Stripe 19 Yellow/Brown Stripe & Brown/Yellow Stripe 24 Purple/Brown Stripe & Brown/Purple Stripe 5 White/Gray Stripe & Gray/White Stripe 10 Red/Gray Stripe & Gray/Red Stripe 15 Black/Gray Stripe & Gray/Black Stripe 20 Yellow/Gray Stripe & Gray/Yellow Stripe 25 Purple/Gray Stripe & Gray/Purple Stripe

51 T E C H N I C A L I N F O R M A T I O N 51 Index Nubers Page Page Page Page 11700A K A A KP A A A A A A A DB F A A A F LS A A NH A A A A LS F F A A NH A A A LS NH A LS A NH LS F F F A A A LS NH NH NH ELS A ENH F A A LS NH LS ELS ENH A A NH F F A A BEB A ALS A NH BEB YR ANH NH NH 20 YR E A NH NH NH F A Product Inforation Online Product Service: Optical Fibre Catalogue Audio/Video Cables Catalogue Data Cables Catalogue Master Catalogue

52 12.1 Belden CDT Electronics Division Europe Edisonstraat 9, Postbus PG Venlo, 5900 AA Netherlands Tel: Fax: Tech Support Tel eail [email protected] or visit Venlo is the european headquarters for our electronics division. Belden CDT has fices in 15 countries serving over 150 countries worldwide.