Polymer composites 2010

Transcription

1 International conference Polymer composites 2010 April 27 28, 2010 Pilsen, Czech Republic INVITATION AND PROGRAMME Exclusive media partner

2 European Union European regional development Investing in Your Future This conference is realized with the support of project My jsme Evropa! Perspektivy rozvoje hospodářského prostoru within sub-project Kooperační podpora. NEW TECHNOLOGIES - RESEARCH CENTRE UNIVERSITY OF WEST BOHEMIA SYNPO a.s. SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND SYSTEMS OF CZECH MECH CHANICS SOCIETY PRAHA CZECH TECHNOLOGY PLATFORM - AEROSPACE ECONOMIC CHAMBER OF THE PILSEN REGION under the auspices of president of the region of Pilsen Doc. Mudr. Milada Emmerová, CSc., mayor of the City of Pilsen Ing. Pavel Rödl and rector of the University of West Bohemia Doc. Ing. Josefa Průša, CSc. have the honour to invite you to International conference POLYMER COMPOSITES 2010 April 27-28, 2010 Pilsen, Czech Republic Teslova 3, Plzeň Science and Technology Park

3 ORGANIZATION AND PROGRAMME COMMITTEE: Committee members: Miroslav Holeček, NTC ZČU Plzeň Petr Martinec, NTC ZČU Plzeň Bronislav Foller, NTC ZČU Plzeň Petra Pechmanová, NTC ZČU Plzeň Eva Nezbedová, FCH, VUT Brno František Socha, SYNPO, a.s., Pardubice Martin Paloda, TC Inter-Informatics a.s., Praha Josef Křena, Letov letecká výroba s.r.o, Praha Jan Orlt, consultant composites, Praha Conference secretariat address: Petra Pechmanová New Technology - Research Centre University of West Bohemia Univerzitní 8, Plzeň Telefon: Fax: [email protected] The aim of the Conference is to enable specialists from research and industry to present actual knowledge and trends in research and development, analyses, materials, technology, manufacturing and applications of composite materials.

4 CONFERENCE PROGRAMME Tuesday, April 27, Registration, exhibition area set-up 9.30 Opening and welcome PLENARY LECTURES Chemical substances - amendments of REACH regulations and other Statutory Instruments in the EU and in the Czech Republic, in relation to occupational environment in particular. MUDr. Miroslava Hornychová, CSc., National Institute of Public Health, Praha, Czech Republic Filled polyolefines up-to-date state and future Assoc. Professor Eva Nezbedová, VUT Faculty of Chemistry, Brno, Czech Republic C o f f e e b r e a k Section ANALYSIS AND DESIGN Chairmen: Josef Křena, Jaroslav Padovec Determination of Reserve Factor for aircraft composite structures Cabrnoch B., TC Inter-Informatics a.s., Praha, Czech Republic Influence of the cross-section form on the cross-sectional parameters Karall T., Austrian Research Institute for Chemistry and Technology (ofi), Vienna, Austria Cylinder-flat bottom junction of vertical composite vessel loaded by hydrostatic pressure Padovec J., Consulting, Strength of plastic and composite structures, Praha L u n ch b r e a k Section ANALYSIS AND DESIGN Chairmen: Josef Křena, Jaroslav Padovec Computation of selfinduced temperature fields of vibrating composite part Pompe V., Aeronautical Research and Test Institute, Propeller dept., Praha, Czech Republic Properties of composites with textile reinforcement computed from models and describes in 2D, 3D simulated pictures Vozková P., TU Liberec, Faculty of Textile Engineering, Czech Republic

5 Section TECHNOLOGY AND APPLICATION Chairmen: Bronislav Foller, Jan Orlt Recycling of thermoset carbon fibre reinforced composites processed by thermal-oxidizing decomposition Mašek Z., Aeronautical Research and Test Institute, Praha, Czech Republic Structural bonding an expensive way? Mayer Ch., Mayer & Mayer GmbH, Graz, Austria All-composite fuselage of small transport aircraft Průcha P., Řehák M., LA composite, s.r.o., Praha, Czech Republic Thermal analysis of composites based on MODAR matrix system Foller B., New Technologies - Research Centre, University of West Bohemia, Czech Republic Transfer to Pilsen Urquell - bus available Excursion in Pilsen Urquell plant with English guide Evening party in representative hall of Pilsen Urquell Wednesday, April 28, Section MATERIALS, PROPERTIES, TESTING Chairman: Eva Nezbedová, František Socha Rheological analysis of polymer systems Paar A., Anton Paar GmbH, Graz, Austria Latest improvements in thermal analysis & infrared spectroscopy to characterize composites Pera S., PerkinElmer Italia SpA, Italy Polyethylene composites reinforced with wood fibers: effects of coupling agent, initiator and nanofiller on tensile and impact. Kokta v., Gu R., University of Québec, Canada Advanced toughness characterization of reinforced thermoplastic polymers using fracture mechanics approaches Ralf Lach 1,2, Beate Langer 1, Wolfgang Grellmann 1,2 1 Polymer Service GmbH Merseburg, Germany 2 Martin-Luther University Halle-Wittenberg, Centre of Engineering, Halle, Germany Modification of epoxide resins for hand-lay-up technology by core-shell rubbers Červinková M. 1, Eder M. 1, Blaha M. 1, Čermák 2, Matějka L M s.r.o. Kunovice, 2 Tomas Bata University Zlin, 3 Insitute of Macromolecular Chemistry CAS, Praha C o f f e e b r e a k

6 State-of-the-art and future of composites workshop L u n ch b r e a k Section MATERIALS, PROPERTIES, TESTING Chairman: Eva Nezbedová, František Socha Study of internal damping in composites based on epoxy matrix Kroisová D., Department of materials, TU Liberec, Czech Republic Strength of slings made of fibre bundles Růžička M. 1, Kulíšek V. 1, Turčič B. 2, Blahouš K. 3 1 ČVUT FS, Institute of mechanics, biomechanics and mechanotronics Praha, 2 Ing. Branko Turčič, Czech Republic 3 Compo Tech PLUS spol. s r.o., Sušice, Czech Republic An influence of surface modification of glass fibers on mechanical response of long-fiber-reinforced polymer composite Bábik A. 1, Janeček P. 1, Lasota T. 2, Burša J. 2, Čech V. 1 1 Faculty of Chemistry, University of Technology, Brno, Czech Republic 2 Institute of solid mechanics, mechatronics and biomechanics, University of Technology, Brno, Czech Republic Carbon fibres carbon nanotubes Grégr J., Košťáková E., Department of Chemistry, TU Liberec, Czech Republic C l o s e o f t h e c o n f e r e n c e

7 ORGANIZATION HINTS Place and date Plzeň Science and Technology Park, Teslova 3, Plzeň - Borská pole April 27-28, 2010 Conference languages: Czech and English. Simultaneous translation is provided. Accommodation: The accommodation will be reserved in Hotel Victoria ( Single room use/night: 38EUR, double room use/night 55 EUR (breakfast included) Participation fees The participation fee for a regular participant is 120 EUR The participation for lecturer/speaker is 60 EUR The participation fee includes: Conference proceedings Drinks and lunch during breaks Simultaneous translation Excursion in Pilsen Urquell and Evening party We ask you to pay the participant fee on the account number: SWIFT address: KOMBCZPPXXX IBAN CZ Bank Code: 0100 Detail of payment: Beneficiary: Zapadoceska univerzita v Plzni, Univerzitni 8, Plzen, Czech Republic Bank transfer to: Komercni banka, a. s. Na Prikope 33 /cp 969, Praha 1, Czech Republic In case of single or multiple-payment, it is necessary to put details of payment and your name in the payment order. In special case it is possible to pay in cash (CZK) by registration.

8 New Technology Research Centre University of West Bohemia Univerzitní Plzeň REGISTRATION CARD International conference POLYMER COMPOSITES 2010 April 27-28, 2010, Pilsen Surname, first name of the participant:... Company: Address (Zip-code/city/street no./country): Phone:... Fax:... I order herewith accommodation in hotel Victoria : 26./27. April 2010 yes no 27./28. April 2010 yes no Date Signature

9 Open your eyes to a world of opportunity IN FT-IR SPECTROSCOPY 2009 PerkinElmer, Inc _05. All trademarks or registered trademarks are the property of PerkinElmer, Inc. and/or its subsidiaries. See what advanced solutions can do for you. At PerkinElmer, we think about the needs of your lab today and tomorrow. Whether you re performing QA/QC applications, studying processes in plastics or pharmaceuticals, or developing the cures of tomorrow, our comprehensive portfolio of molecular spectroscopy, thermal analysis and hyphenated techniques will enable you to see more than you ever thought possible. Optimize your laboratory s potential. Let us show you how.