How To Organize A Conference On Composites

Transcription

1 International conference POLYMER COMPOSITES 2013 May 28 29, 2013 Pilsen, Czech Republic INVITATION AND PROGRAMME Exclusive media partner

2 CZECH TECHNOLOGY PLATFORM - AEROSPACE SYNPO a.s. SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES OF CZECH MECHANICS SOCIETY PRAHA PYRGOS, spol. s r. o. AGENTURE FOR TECHNOLOGIE TRANSFER, INNOVATION, APPLICATION OF SCIENCE AND RESEARCH AND KNOWLEDGE ECONOMY EUROPEAN UNION EUROPEAN REGIONAL DEFELOPMENT FUND INVESTMENT IN YOUR FUTURE

3 International conference POLYMER COMPOSITES 2013 May 28-29, 2013 Pilsen, Czech Republic Teslova 3, Plzeň Science and Technology Park

4 ORGANIZATION AND PROGRAMME COMMITTEE: Committee members: Petr Martinec, New Technology Research Centre, University of West Bohemia in Pilsen Bronislav Foller, New Technology Research Centre, University of West Bohemia in Pilsen Petra Pechmanová, New Technology Research, University of West Bohemia in Pilsen Eva Nezbedová, Polymer Institute Brno František Socha, SYNPO, a.s., Pardubice Vilém Pompe, Aeronautical Research and Test Institute, Prague Josef Křena, LETOV LETECKÁ VÝROBA, Ltd. Prague Petr Štrunc, STTA Ltd., Pilsen Tomáš Kovářík, New Technology Research Centre, University of West Bohemia in Pilsen Jan Orlt, consultant composites, Prague Conference secretariat address: Petra Pechmanová New Technology-Research Centre University of West Bohemia in Pilsen Univerzitní 8, Plzeň Telefon: Fax: The aim of the Conference is to enable specialists from research and industry to present actual knowledge and trends in research and development, analyses, materials, technology, manufacturing and applications of composite materials.

5 CONFERENCE PROGRAMME Tuesday, May 28, :00 9:30 Registration, exhibition area set-up 9:30 Opening and welcome PLENARY LECTURES Composite nanofibres Grégr J., Košťáková E., Technical University Liberec, Czech Republic Wind energy composites: Development and use of resins, gelcoats and adhesives Van Buren A., Ashland Performance Materials, Kehl, Germany 11:15 11:30 C o f f e e b r e a k 11:30 13:00 Section ANALYSIS AND DESIGN Chairmen: Josef Křena, Jaroslav Padovec Debonding and buckling of filament wound vessel above saddle support Padovec J., Consulting, Strength of plastic and composite structures, Prague, Czech Republic A method of source functions for micromechanical analysis of composite materials reinforced by unidirectional fibres with large aspect ratio Žmindák M., Pelagič Z., Faculty of Mechanical Engineering, Dept. of Applied Mechanics, Žilina, Slovakia Experimental verification and numerical model for fatigue properties of some composite materials Král M., Aeronautical Research and Test Institute, Prague, Czech Republic Finite element analysis of wave propagation in composite tubes Pelagič Z., Žmindák M., Faculty of Mechanical Engineering, Dept. of Applied Mechanics, Žilina, Slovakia 13:00 13:45 L u n ch b r e a k 13:45 16:45 Section TECHNOLOGY AND APPLICATION Chairmen: Bronislav Foller, Jan Orlt Testing of sandwich structures and tram roofs in practice Padovec Z., Doubrava K, Růžička M., ČVUT Praha, Faculty of mechanical engineering, CR 6sigma by force of structural bonding with MMA adhesives Mayer Ch., Mayer & Mayer HandelsgmbH, Markt Allhau, Austria AIREX We offer core solution Szilagyi S., Airex AG, Speciality Foams, Sins, Switzerland Fly ash based thermoplastic composites Pospíšil L., Křivánek J., Polymer Institute Brno, Czech Republic C o f f e e b r e a k

6 Thermal behaviour of geocement composite Kovářík T. 1, Kadlec J. 1, Rieger D. 1, Říha J. 1, Novotný P. 1, Kullová L. 1, Franče P. 2, University of West Bohemia in Pilsen, NTC 1, UUD 2 Czech Republic Pultrusion technology of inorganic matrix composites Foller B 1., Roubíček P 2. 1 New Technology Research Centre, University of West Bohemia in Pilsen, Czech Republic 2 České lupkové závody a.s., Nové Strašecí, Czech Republic 17:00 Transfer to Brewery House Černice ( bus available (incl.stop at Hotel Victoria, dept. at 17:45) 18:00 Excursion in Brewery Černice with English guide, beer tasting 20:00 E v e n i n g p a r t y (bus transport back to Hotel Victoria ensured) Wednesday, May 29, :00 12:00 Section MATERIALS, PROPERTIES, TESTING Chairmen: Eva Nezbedová, František Socha Informational value of selected methods of non-destructive material testing to be applied on short-fibre reinforced polymer composites and polymer nanocomposites Lach R. 1, Schoßig M. 2,3, Bierögel Ch. 4, Wolfgang Grellmann 1,4 1 Polymer Service GmbH Merseburg, Germany 2 University of Applied Science Merseburg, Department of Engineering and Natural Sciences, Germany 3 Institute of Polymer Materials, Merseburg, Germany 4 Martin-Luther University Halle-Wittenberg, Centre of Engineering, Halle (Saale), Germany Polypropylene particulate composite preparation, morphology and mechanical properties Nezbedová E. 1, Krčma F. 2, Pospíšil L. 1, Lach R. 3 1 Polymer Institute Brno, Czech Republic 2 Brno University of Technology, Czech Republic 3 Polymer Service GmbH, Merseburg, Germany Experimental evaluation to characterize the shear deformation behaviour of hybrid yarn based textiles Hufenbach W., Maron B., Mertel A., Langkamp A., TU Dresden, Germany C o f f e e b r e a k Evaluation of adhesion on fibre-matrix interface of polymer composites with controlled interface using microindentic test Knob A 1, Babik A. 1, Čech V 1, Drzal L.T. 2 1 Institute of chemical materials, Chemical faculty, VUT Brno, Czech Republic 2 Composite Materials and Structure Center, East Lansing, Michigan, USA Composite materials of decreased flammability Vavrečková D 1., Rusnák V. 2, Kotek I. 1 1 SYNPO a.s., Pardubice, 2 FORM s.r.o., Horní Lideč, Czech Republic

7 12:00 12:45 L u n ch b r e a k 12:45 16:30 Section MATERIALS, PROPERTIES, TESTING Chairmen: Eva Nezbedová, František Socha SAERTEX lightweight structural core for high performance sandwich structures Ščerba M., Saertex GmbH, Czech Republic Monitoring of composite structure failures during loading process Weis M., Aeronautic Institute, FSI -TU Brno, Czech Republic Advanced testing of polymer composites by means of thermal analysis Schmölzer S., NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany The new Perseus STA 449: Direct coupling of simultaneous thermal analysis (STA) and Fourier-Transform-Infrared (FTIR) spectroscopy. Schindler A. 1, Neumann G. 1, Rager A. 2, Füglein E. 1, Blumm J. 1, Denner T. 1 1 NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany 2 BRUKER Optik GmbH, Ettlingen, Germany Thermal diffusivity and thermal conductivity of polymer composites using the laser flash technique Stolbitzer D., Lindemann A., NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany Advantage of the TG-GCMS-coupling in the polymer field Fischer C., Füglein E., Post E., Hanss J., NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany 16:30 C l o s e o f t h e c o n f e r e n c e During the conference there is a posibility to discuss issues with the authors of the poster section and review the technical literature and samples of exhibiting companies.

8 Poster Section Presentation of NETZSCH Gerätebau Giersing L., NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany Study of textile composites imperfections with basalt and carbon reinforcement Salačová J., TU Liberec, Czech Republic Change the properties of composite materials with polysiloxan matrix influenced by curing temperature Maršálková M., Grégr J., TU Liberec, Czech Republic Methods of modeling and experimental measurement of polysiloxane based ceramic matrix properties Tomková B., Grégr J., Maršálková M., TU Liberec, Czech Republic Glued joints titanium/polytetrafluorethylene Podzimek J., VZLÚ Prague, Czech Republic

9 ORGANIZATION HINTS Place and date Pilsen-Borska pole, Plzeň Science and Technology Park, Teslova 3, GPS: S V April th, 2011 Conference languages: Czech and English. Simultaneous translation is provided. Accommodation: The accommodation in the Hotel Victoria ( In this case, guaranteed Conference room rate 975,-CZK for singles and 1425,-per double room. Participation fees: The participation fee for a regular participant is 130 EUR The participation fee includes: Conference proceedings Drinks and lunch during breaks Simultaneous translation Excursion in Pilsen Urquell and Evening party We ask you to pay the participant fee on the account number until May 13th: SWIFT address: KOMBCZPPXXX IBAN CZ Bank Code: 0100 Detail of payment: Beneficiary: Zapadoceska univerzita v Plzni, Univerzitni 8, Plzen, Czech Republic Bank transfer to: Komercni banka, a. s. Na Prikope 33 /cp 969, Praha 1, Czech Republic In case of single or multiple-payment, it is necessary to put details of payment and your name in the payment order. In special case it is possible to pay the participation fee cash (3200 CZK) by registration.

10 Patriot - UltraMax - Advantage stříkací zařízení pro polyesterové pryskyřice a gelcoaty injektážní zařízení pro technologie RTM, LRTM revoluční řešení - PATRIOT - nejpřesnější dávkování komponent školení obsluh příslušenství servis a náhradní díly oficiální zastoupení STTA s.r.o. Klestová 14, Plzeň, [email protected],

11 Bringing strength on the road. MULTIAXIALS CLOSED MOULD REINFORCEMENTS SELF ADHESIVE FABRICS KITTED-FABRICS PREFORMS COMPOSITE PARTS WIND ENERGY OFFSHORE BOAT AND SHIPBUILDING RAILWAY AUTOMOTIVE AEROSPACE PIPE RELINING CIVIL ENGINEERING RECREATION SAERTEX worldwide SAERTEX Germany SAERTEX France SAERTEX USA SAERTEX India SAERTEX Stade, Germany SAERTEX Portugal SAERTEX South Africa SAERTEX China

12

13

14 Y OUR PARTNER TODAY FOR THE CHEMISTRY OFTOMORROW DEVELOP & RESEARCH & EVALUATION TESTING PRODUC

15

16 UNIQUE TEXTILES, s.r.o. se zabývá výrobou technických tkanin a výztuží zejména ze skleněného vlákna pro využití v kompozitních materiálech. Sklotkaniny Rovingové tkaniny Skelné výztuže Hybridní tkaniny kombinace vláken Tkané skelné a rovingové pásky Kombimateriály UNIQUE Textiles, s.r.o.: Holešovská Fryšták Tel.: Fax: [email protected]

17

18 Ashland Is Your Trusted Partner for Pultrusion Products Registered trademark, Ashland or its subsidiaries, registered in various countries Trademark, Ashland or its subsidiaries, registered in various countries * Trademark owned by a third party 2012, Ashland AD Ashland offers a host of products designed for the pultrusion process including Derakane, Hetron, Modar and Aropol resins. Ashland s resins are Weather, UV and corrosion resistant Adaptable to a variety of structural needs Compliant for many fire resistance solutions Ashland s products enable the manufacture of complex profiles with high quality appearance and surface finish while maximizing line speed, including our Envirez resins, which contain a significant amount of renewable materials offering a greener solution for your pultrusion products without compromising resin quality! Visit ashland.com to learn more or contact our European sales team at [email protected]. With good chemistry great things happen.

19 LABIMEX CZ s pevnou zkušební plochou nebo oto ným karuselem sv telné spektrum pro INDOOR a OUTDOOR zkoušky regulace intenzity osvitu, teploty a relativní vlhkosti možnost post iku vzork vodou Q- SUN XE3 HS Q- SUN XE1B Q-SUN XE2 - výb r spektra UV zá ení- lampy UVA, UVB, CW možnost post iku vzork vodou, regulace intenzity osvitu, teploty kondenza ní periody se 100% vlhkostí vzduchu Poradenství, dodávky, servis, instalace, zaškolení, kalibrace zajiš uje: QUV/SPRAY v R: Ing. Milan Pražák v SR: Ing. Jozef Maco Na Zámecké 11 Rakol uby Praha Ko ovce [email protected] [email protected]

20

21 55. mezinárodní strojírenský veletrh MSV 2013 Měřicí, řídicí, automatizační a regulační technika Brno Výstaviště, Veletrhy Brno, a.s. Výstaviště Brno Tel.: Fax: [email protected] Záštita Svaz průmyslu a dopravy ČR Ministerstvo průmyslu a obchodu Hospodářská komora ČR

22 the ALL in ONE solution... Structural Adhesives // Engineering Adhesives Dispensing Equipment // Accessories // Static Mixers Mayer & Mayer HandelsgmbH A-7411 Markt Allhau, Gewerbeweg 16 FN , ATU Phone: Fax:

23 ACRALOCK Structural Adhesives by Engineered Bonding Solutions, LLC, are advanced two component methacrylate structural adhesives, designed to bond chemically to most surfaces, providing a permanently locked or integrated assembly of steel, aluminum, engineered plastics, high performance composites and other materials. The management team of Engineered Bonding Solutions, LLC comprises well over 50 years of combined experience in the composites and structural adhesives market. Our new production facility, located on the Indian River waterway in Titusville, Florida, features state of the art mixing, testing and packaging equipment. Acralock Structural Adhesives are capable of bonding a wide range of materials either to themselves or cross bonded to a dissimilar substrate, with little to no preparation. Our patent pending formulations are designed to provide very tough and durable bonds with high shear strength and elongation properties. This makes Acralock adhesives the best choice for applications that need to withstand harsh environmental and shock load conditions. The rapid cure nature of these adhesives at room temperature substantially decreases the assembly process time and increase production. Acralock Structural Adhesives Chemically bonds to material surface Combine high bond strength with choice of stiffness or flexibility Bond most materials without grinding or priming Include primerless Metal Bonder Bond Telene and Hot Dipped Galvanized Steel Combine fast cure with a choice of working time from 5 to 120 min Give LOW Exotherm/LOW shrink/less read through Acralock Structural Adhesives bond: Polyesters Acrylics Poly DCPD (Telene) Aluminum Polyester Gelcoats ABS SMC/BMC Stainless Steel Topcoats PVC/FPVC/CPVC PU - Rim Carbon Steel Vinyl Esters Styrenics PA RIM Coated Metals Epoxies PET Nylon Hot Dipped Galvanized Steel Polyurethanes PMMA Rubbers E - Galvanized Metals Elastomers Polycarbonate Wood Ceramics Floatglas Coated Floatglas Concrete Natural Stones