Heavy-Duty Corrosion Protection. Protection and conservation of value in industrial plants

Transcription

1 International Conferences Heavy-Duty Corrosion Protection Protection and conservation of value in industrial plants International conference with exhibition November 24 25, 2010, Munich (Germany) Sponsors: TÜV SÜD Industrie Service GmbH TÜV SÜD Akademie GmbH

2 About the conference Efficiency as well as availability of industrial plants can only be ensured if also the anti-corrosion systems have been planned, designed and implemented in a matter to perform best. The first international TÜV SÜD conference Heavy-Duty Corrosion Protection deals with the application of plastics and coatings as lining systems in industrial plants. Especially latest developments with regard to standards, regulations national and European as well as the Water Federal Act will be presented. Furthermore the selection of material, quality assurance and practical experience are in the focus of the conference. You will benefit from the reports of well-known companies and experts. Take the chance to meet skilled experts and to discuss latest findings! The conference is supported by

3 The conference addresses Plant design engineers and plant builders Engineers and designers Manufacturers of raw materials and semi-finished products Plant operators in chemical and mineral oil industry as well as energy provider companies Government agencies and associations Research and development Conference language Conference language is German. All German lectures will be simultaneously translated into English. Committee Gregor Büche, Quadrant EPP AG Marcus Demetz, TÜV SÜD Industrie Service GmbH Norbert Häg, Ashland Composite Polymers Ralf Kleinwechter, GBT-BÜCOLIT GmbH Michael Leutner, TÜV SÜD Industrie Service GmbH Dieter Velte, REMA TIP TOP GmbH Dr. Elmar Witten, AVK Industrievereinigung Verstärkte Kunststoffe e.v. Helmut Zimmermann, TÜV SÜD Industrie Service GmbH Interested companies have the opportunity to present their products and services in the exhibition which will be held parallel to the conference.

4 Agenda on November 24, :30 Corrosion protection: prevention of failures, not corrosion an introduction Prof. Dr. Günter Schmitt, IFINKOR - Institut für Instandhaltung und Korrosionsschutztechnik ggmbh, Iserlohn, DE 10:00 German and European standards for corrosion protection in chemical process plants Dr. Jürgen Fenner, Consulting Engineer, Hundsdorf, DE 10:30 Criteria for material selection Dieter Velte, REMA TIP TOP GmbH, Mogendorf, DE 11:15 Coffee break 11:45 Thermoset resin linings applications and case studies Arie van Buren, Ashland Composite Polymers, Kehl, DE 12:15 Optimization of a woven filter Ralf Kleinwechter, GBT-BÜCOLIT GmbH, Marl, DE 12:45 Lunch break 14:00 Quality assurance in the heavy-duty corrosion protection Michael Leutner, TÜV SÜD Industrie Service GmbH, Munich, DE 14:30 Workshop and onsite rubber linings state of the art Wolfgang Berger, REMA TIP TOP GmbH, Mogendorf, DE 15:15 Elastomeric gaskets to suit flanged joints of rubberlined pipes and discharge adapters of storage tanks Ulrich Kowalewski, Kroll & Ziller GmbH & Co. KG, Hilden, DE 15:45 Coffee break 16:15 Application of fluoropolymers for heavy-duty corrosion protection Gregor Büche, Dr. Mirko Lotz, Quadrant EPP AG, Lenzburg, CH 16:30 Fixpoint-lining Peter Köhler, Kunststoffe Lauing Nachfolge GmbH, Herne, DE 17:00 Fluoropolymer linings surface protection systems for highest quality applications Werner Mieschke, Büro für Kunststofftechnik, Liederbach, DE 17:30 End of first conference day 18:30 Evening event Agenda on November 25, :30 Coatings in hydraulic steel engineering requirements and applications Stephan Müller, RWE Power AG, Frechen, DE 9:00 Leaking protection coatings for mineral oil tanks practical reports of technique projects and operational experience Lutz Dembowski, Gewässerschutz-Systeme Europa, Ballwil, CH 9:30 An approach to contaminated substrates in industrial waste water installations: spray applied lining systems based on geocomposites Ulrich Lange, MC-Bauchemie Müller GmbH & Co KG, Bottrop, DE 9:55 Coffee break 10:20 Polyurethane cement hybrid screeds: the heavy-duty solution for floors in demanding environments Ulrich Lange, MC-Bauchemie Müller GmbH & Co KG, Bottrop, DE 11:00 Refurbishing of chimney tubes by coatings Ralf Kleinwechter, GBT-BÜCOLIT GmbH, Marl, DE 11:30 Lunch break 12:30 Coating of oil storage tanks as corrosion protection in consideration of the storage of new bio fuels. Coating materials execution of projects Peter von Däniken, Adisa Service und Entwicklungs AG, Dietikon, CH 13:00 Verification by the construction supervision authorities with regard to linings of facilities for the storage, filling and handling of liquids hazardous to water national and European regulations in comparison Dr. Angela Pawel, Deutsches Institut für Bautechnik (DIBt), Berlin, DE 13:30 Reform of the Federal Water Act; leak monitoring (double walled) Dr. Bernd Haesner, TÜV SÜD Industrie Service GmbH, Mannheim, DE 14:00 End of the conference

5 Participation fee 770, plus VAT The registration fee includes conference documentation, lunch and drinks during breaks as well as the evening event. Conference venue TÜV SÜD Vortragssaal Chiemsee Westendstrasse Munich (Germany) You will receive travel and hotel information with the confirmation of your registration. Registration and information TÜV SÜD Akademie GmbH International Conferences Paulina Krupkova Westendstrasse Munich, Germany Phone Fax å Photographic material: REMA TIP TOP GmbH

6 Registration by Fax to or by to and on Heavy-Duty Corrosion Protection International Conference, November 24 25, 2010, Munich Name First Name Company Department Street Country / Zip Code / City Phone Fax* * *With indication of your Fax and address, you agree to receive information material from the TÜV SÜD Akademie. You can unsubscribe the sending of such info material anytime without costs. Invoice address (if different from above) Registration fee: 770, plus VAT Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge. In case of cancellation beyond this deadline and up to the third working day prior the event, 50 % of the invoice amount is due for payment. In case of cancellation beyond this deadline or failure to participate in the event, the full amount of the invoice shall be due. I accept changes in the programme and the general terms and conditions of participation of TÜV SÜD Akademie GmbH. Date / Signature