Series # Flanged Cast Steel Check Valve
|
|
|
- Hugh McBride
- 7 years ago
- Views:
Transcription
1 Series # langed Cast Steel Check Valve eatures SHARPE - SERIES # langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld Ends Applicable Standards: Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598 Technical Information Temperature Working Pressure psi -20 to
2 Dimensions, Parts & Materials 4 & Above SHARPE - SERIES # langed Cast Steel Check Valve 10/12 Size A B C D E G Num of Bolt Holes / Ordering ig: Description: 8 - Series # lange Ends - Cast Steel Size Series Class Ends Body Material Options G E A B C D lange 4 Cast Steel X Oxygen Service 2-1/ Buttweld S Silicon ree 3 18 RTJ Ring Type Joint lange Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required. No. Part Name Material 1 Body Carbon Steel A216 - WCB 2 Seat A105 & STL.6 3 Disc A105 & 410 Stainless Steel 4 Hinge Carbon Steel A216 5 Gasket A Nut A Pin A Rivit 304 Stainless Steel 9 Name Plate 304 Stainless Steel 10 Gasket 304 & lexible Graphite 11 Cover Carbon Steel A216 - WCB 12 Bolt B7 Steel A Nut 2H Steel A Gasket Soft Iron 15 Plug 410 Stainless Steel 16 Pin 304 Stainless Steel 17 Eyebolt Carbon Steel 18 Gasket 304 & lexible Graphite 19 Bolt Carbon Steel 20 Gland Carbon Steel
3 Series # langed Cast Steel Check Valve eatures SHARPE - SERIES # langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld Ends Applicable Standards: Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598 Temperature Working Pressure psi -20 to
4 Dimensions, Parts & Materials 4 & Above & SHARPE - SERIES # langed Cast Steel Check Valve G Size A B C D E G Num of Bolt Holes / Ordering E A B C D ig: Description: 8 - Series # lange Ends - Carbon Steel Size Series Class Ends Body Material Options lange 4 Cast Steel X Oxygen Service 2-1/ Buttweld S Silicon ree 3 16 RTJ Ring Type Joint lange No. Part Name Material 1 Body Carbon Steel A216- WCB 2 Seat A105 & STL.6 3 Disc A105 & 410 Stainless Steel 4 Hinge Carbon Steel A216 5 Gasket A Nut A Pin A Rivit 304 Stainless Steel 9 Name Plate 304 Stainless Steel 10 Gasket 304 & lexible Graphite 11 Cover Carbon Steel A216 - WCB 12 Bolt B7 Steel A Nut 2H Steel A Gasket Soft Iron 15 Plug 410 Stainless Steel 16 Pin 304 Stainless Steel 17 Eyebolt Carbon Steel 18 Gasket 304 & lexible Graphite 19 Bolt Carbon Steel 20 Gland Carbon Steel 10/12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.
5 SHARPE - SERIES # langed Cast Steel Check Valve Series # langed Cast Steel Check Valve eatures Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld Ends Applicable Standards: Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598 Temperature Working Pressure psi -20 to
6 Dimensions, Parts & Materials 4 & Above SHARPE - SERIES # langed Cast Steel Check Valve G Size A B C D E G Num of Bolt Holes / Ordering ig: Description: 8 - Series # lange Ends - Cast Steel Size Series Class Ends Body Material Options E A B C D lange 4 Cast Steel X Oxygen Service 2-1/ Buttweld S Silicon ree 3 16 RTJ Ring Type Joint lange No. Part Name Material 1 Body Carbon Steel A216 - WCB 2 Seat A105 & STL.6 3 Disc A105 & 410 Stainless Steel 4 Hinge Carbon Steel A216 5 Gasket A Nut A Pin A Rivit 304 Stainless Steel 9 Name Plate 304 Stainless Steel 10 Gasket 304 & lexible Graphite 11 Cover Carbon Steel A216 - WCB 12 Bolt B7 Steel A Nut 2H Steel A Gasket Soft Iron 15 Plug 410 Stainless Steel 16 Pin 304 Stainless Steel 17 Eyebolt Carbon Steel 18 Gasket 304 & lexible Graphite 19 Bolt Carbon Steel 20 Gland Carbon Steel 10/12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.
7 Series # langed Stainless Steel Check Valve eatures SHARPE - SERIES # langed Stainless Steel Check Valve Bolted Cover Swing Type Horizontal or Vertical lines or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld Ends Applicable Standards: Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598
8 1/2" - 14" Dimensions, Parts & Materials C SHARPE - SERIES # langed Stainless Steel Check Valve H Size A B C D E G H Num of Bolt Holes 1/ / / / B G A E D No. Part Name Material 1 Body 316 Stainless Steel - C8M 2 Disc 316 Stainless Steel - C8M 3 Nut 304 Stainless Steel 4 Arm Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket PTE 7 Washer 304 Stainless Steel 8 Bolt 304 Stainless Steel 9 Cover 316 Stainless Steel - C8M 10 Bolt 304 Stainless Steel
9 16" - 24" Dimenisons, Parts & Materials C SHARPE - SERIES # langed Stainless Steel Check Valve Size A B C D E G H Num of Bolt Holes B G A E No. Part Name Material 1 Body 316 Stainless Steel - C8M 2 Seal acing 316 Stainless Steel - C8M 3 Disc 316 Stainless Steel - C8M 4 Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket 316 Stainless Steel + Graphite 7 Cover 316 Stainless Steel - C8M 8 Cover Bolt B8 Stainless Steel 9 Cover Nut Grade 8 Nut D
10 Technical Information SHARPE - SERIES # langed Stainless Steel Check Valve Ordering Temperature Working Pressure psi -20 to ig: Description: 8 - Series # lange Ends - Stainless Steel Size Series Class Ends Body Material Options 1/ lange Stainless Steel X Oxygen Service 3/4 2 Buttweld S Silicon ree 1 RTJ Ring Type Joint lange 1-1/ / /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.
11 Series # langed Stainless Steel Check Valve eatures SHARPE - SERIES # langed Stainless Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld Ends Applicable Standards: Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598
12 1/2" - 8" Dimensions, Parts & Materials C SHARPE - SERIES # langed Stainless Steel Check Valve H Size A B C D E G H Num of Bolt Holes 1/ / / / B G A E D No. Part Name Material 1 Body 316 Stainless Steel - C8M 2 Disc 316 Stainless Steel - C8M 3 Nut 304 Stainless Steel 4 Arm Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket PTE 7 Washer 304 Stainless Steel 8 Bolt 304 Stainless Steel 9 Cover 316 Stainless Steel - C8M 10 Bolt 304 Stainless Steel
13 10" - 24" Dimensions, Parts & Materials SHARPE - SERIES # langed Stainless Steel Check Valve Size A B C D E G H Num of Bolt Holes B G A E No. Part Name Material 1 Body 316 Stainless Steel - C8M 2 Seal acing 316 Stainless Steel 3 Disc 316 Stainless Steel - C8M 4 Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket 316 Stainless Steel + Graphite 7 Cover 316 Stainless Steel - C8M 8 Cover Bolt B8 Stainless Steel 9 Cover Nut Grade 8 Nut D C
14 Technical Information SHARPE - SERIES # langed Stainless Steel Check Valve Ordering Temperature Working Pressure psi -20 to ig: Description: 8 - Series # lange Ends - Stainless Steel Size Series Class Ends Body Material Options 1/ lange Stainless Steel X Oxygen Service 3/4 2 Buttweld S Silicon ree 1 RTJ Ring Type Joint lange 1-1/ / /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
Crane Cast Steel Valves
Crane Cast Valves Cast Valves General Index Ordering Information... 4 Materials... 5 General Data... 6 Identification... 7 General Features... 8 Gate Valve Features... 9 NACE Trim Valves...13 Globe Valve
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
NEWCO VALVES Newmans Inc., Newmans Valve Ltd. NEWCO/OIC Cast Valve Operation & Maintenance Manual
NEWCO VALVES Newmans Inc., Newmans Valve Ltd. NEWCO/OIC Cast Valve Operation & Maintenance Manual TABLE OF CONTENTS 1. Introduction and Safety Information... 1 1.1. Introduction... 1 1.2. Safety Information...
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve.
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
WD600 STEAM TRAPS. Thermodynamic Steam Trap
WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless
Fig B36 Stainless Steel 'T' Type or Basket Type Strainers
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
The Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
DeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT
3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Large bore valves. Powergeneration / petrochemical industries. Medium & high-pressure valves in accordance with ASME, EN, BS and API
Large bore valves Powergeneration / petrochemical industries Medium & high-pressure valves in accordance with ASME, EN, BS and API An introduction to Key Valve Technologies Ltd. Key Valve Technologies
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
Float and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
The First Choice in Secondary Valves. GREENWOOD VALVES
The First Choice in Secondary Valves. GREENWOOD VALVES QUALITY SERVICE Over sixty-five years of continuous service to the oil, gas and energy industry testifies to Greenwood Valves distinguished tradition
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
Fisher 249 Caged Displacer Sensors
Instruction Manual 249 Caged Sensors Fisher 249 Caged Displacer Sensors Contents Introduction... 1 Scope of Manual... 1... 2 Type Number... 3 Educational Services... 4 Maintenance... 4 Cleaning the Cage...
PLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
L&T CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class 150-2500. 50mm - 1600mm (2-64 ) API 600 BS 1873 BS 1868 ASME B16.34
L&T CAST STEEL GATE, GLOBE & CHECK VALVES ASME Class 150-2500 50mm - 1600mm (2-64 ) API 600 BS 1873 BS 1868 ASME B16.34 Introduction L&T Cast Steel Gate, Globe and Check Valves have established themselves
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Fisher EDR and ETR easy-e Valves
Instruction Manual EDR and ETR Valves Fisher EDR and ETR easy-e Valves Contents Introduction... Scope of Manual... Description... Specifications... 2 Educational Services... 2 Installation... 4 Maintenance...
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
SECTION 15010 GENERAL REQUIREMENTS, MECHANICAL. 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1.
SECTION 15010 June 16, 2005 GENERAL REQUIREMENTS, MECHANICAL A. GENERAL 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1. 2. All piping shall be in accordance
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
API 6D. Trunnion Mounted Ball Valves. Delta Pacific Valve Mfg. Co. New York, U.S.A.
API 6D Trunnion Mounted Ball Valves Delta Pacific Valve Mfg. Co. New York, U.S.A. TABLE OF CONTENTS Page Title Page Title 1 Table of Contents / How To Order 13 Flange Dimensions ANSI Class 150/300 2 Company
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.
CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards
B-1145. Faucet Assembly. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina 1-800-476-4103
B-1145 Faucet Assembly 1 Screw, Lever Handle 000922-45 2 Index, Button, Blue/Cold 001660-45 Index, Button, Red/Hot 001661-45 3 Handle, Lever 001638-45 4 Asm, Spindle NSF - RH/Cold 009753-25 Asm, Spindle
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
Pressure Vessel Assessment Report
Project Information Client: Total Energy Location: Blackwell OK Date: 7/23/2013 Contact: Integrity Mgmt. Advisor: Chuck Easterbrooks - API 510 #2212 Cc: API / UT Inspector: Robert Van Pelt-API 510# 40899
0WKM070002 KENWOOD "EU" KM070 KENWOOD COOKING CHEF *901.400. 901400 ev ol 2012/06
*901.400 KENWOOD COOKING CHEF 1 2 3 4 5 6 63 43 44 45 46 29 13 40 42 7 8 39 9 38 11 37 49 50 47 10 53 14 15 16 54 17 21 18 19 36 35 34 55 56 57 22 20 23 33 28 62 60 58 27 26 59 61 25 24 76 108 107 103
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Fisher A11 High-Performance Butterfly Valve
A11 Valve Product Bulletin isher A11 igh-performance Butterfly Valve The isher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and temperature
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.
valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A
Metal Seated Ball Valves
Tech Bulletin Page 130-11 Metal ed Ball Valves Engineered Valves for Severe Service Reliability with Innovative Process Solutions Severe Series Extreme Series Shut-Off Class IV, V & VI Automated Metal
TECHNO Multi-Purpose Check Valves for Industry
Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED ENDS, PLAIN
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
The cylinder head bolts tightening stages have been updated as listed in Table 1.
NUMBER: 07 EPA04 MBE 4000-6 S.M. REF.: 1.2.2 ENGINE: MBE 4000 DATE: November 2007 SUBJECT: CYLINDER HEAD BOLTS TIGHTENING STAGES PUBLICATION: 6SE412 The cylinder head bolts tightening stages have been
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
Caps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
FOAM CHAMBER MODEL - FC
FOAM CHAMBER MODEL - FC TECHNICAL DATA : MODEL SIZE WORKING PRESSURE FC 50, 65, 80, 100 &150 NB inlet Minimum 2.8 Kg. / sq. cm. (40 PSI) Maximum 7 Kg. / sq.cm. (100 PSI) FLANGE CONNECTION ANSI B16.5 Class
American- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
Fire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
Toroidal Conductivity Sensor
Instruction Sheet PN 51A-/rev.C June 2012 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/rosemountanalytical.com SPECIFICATIONS Wetted Materials:
Ford Service Saddles and Tapping Sleeves
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
Flygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
Stockham Iron Valves. Setting The Standard In Service
Stockham Iron Valves Setting The Standard In Service Setting the Standard in Service The Stockham Pledge Stockham is committed to setting the standard in quality service to the Commercial Construction
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES **From Hartford IM BLDG(10) DESCRIPTION. This work shall consist of the construction of air release, cleanout, and sanitary sewer manholes; and the furnishing
Authentic ITT Service Parts
Pure-Flo Authentic ITT Service Parts Providing our customers with a quality product has always been an integral part of how ITT does business. Building on this commitment your Authorized Distributor of
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
HYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
Cast Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Cast Carbon and Low Alloy Steel Valves ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet esign INEX Profile of KITZ Cast Steel Valves...1 Standard Product Range...2 Standard