SECTION N TOP ENTRY BALL VALVES

Transcription

1 STION N TOP NTRY LL VLVS Table of ontents SRIPTION P Top ntry all Valve eatures...n-3 Materials List...N 4-5 Seat Materials and Seat esigns...n 6-7 Pressure-Temperature Ratings...N 8-13 imensions: langed, Standard Port...N imensions: Socket Weld, Standard Port...N imensions: NPT, Standard Port...N imensions: utt Weld, Standard Port...N imensions: langed, ull Port...N imensions: Socket Weld, ull Port...N-24 imensions: NPT, ull Port...N-25 imensions: utt Weld, ull Port...N-26 imensions: ctuator Mounting...N Standard onnets...n-33 xtended onnets...n-34 ouble Packed onnets...n-35 Jacketed Valves (Steam, Oil)...N-36 Special pplications...n-37 low oefficients...n-38 Operating Torques...N-39 How to Specify Top ntry Valves...N How to Specify Seal Repair Kit for ISO 5211 onnet...n-42 Warranty...N-43 opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-1

2 STION N TOP NTRY LL VLVS N-2 ustomer Service (704)

3 TOP NTRY LL VLVS eatures TOP NTRY VNTS: Self-djusting Seats: ompensate for Wear & Temperature luctuations Spring Loaded Low Pressure Seals Pressure ctivated Seating uilt-in ntistatic eature Simplified In-line Service Minimal Potential Leak Paths ISO 5211 Mounting Pad NO SURPRISS STNRS OMPLIN (Most valves within this family of products comply with the requirements of these listed standards.) SM 16.5 SM SM SM 31.1 SM 31.3 SM 31.8 PI 598 PI 607 MSS SP-25 MSS SP-61 MSS SP-72 Pipe langes and langed ittings ace to ace imensions of Valves (xcept ull Port Valves) Valves langed, Threaded, and Welding nd. Power Piping hemical Plant and Petroleum Refinery Piping as Transmission and istribution Piping Systems Valve Inspection and Testing ire Test Soft Seated Quarter Turn Valves (epending on Seat and Seal Selection) Standard Marking System for Valves Pressure Testing of Steel Valves all Valves with langed of uttweld nds pollo s Top ntry all Valves offer more. In addition to the three things everyone has come to expect from pollo: high quality products, competitive pricing and on time delivery, pollo Top ntry Valves deliver additional premiums; a broader choice of material for both internal and external components, more optional features to choose from, and selectable seal material combinations all resulting in an expanded serviceable application range. IT OR PURPOS These premiums can be combined to create a product uniquely tailored to customer specifications and applications. These additional options allow a valve to be selected without compromising critical performance requirements or operating conveniences and without adding unnecessary features and the costs associated with them. TH ORRT SIN The special V seating design introduced the self-adjusting seat to the floating ball valve. This design does not rely on the built-in interference of conventional floating ball valves. It provides automatic compensation for pressure, temperature and wear. s these changes occur, the ball and seats are continuously snugged down into the V resulting in positive leak-tight shutoff when using resilient seats. Maintaining a low pressure seal had been the most difficult condition for floating ball valves. The wedge effect on the ball and seats down the V assures continued low pressure sealing for the life of the seat. ll pollo Top ntry Valves have an anti-static feature designed in. ll valve configurations also feature blow-out proof stems as standard. TH RIHT PPLITION pollo s Top ntry Valves provide simplified in-line maintenance in the most natural way. The valve body is allowed to act as a permanent part of the piping system. Potential leak paths are eliminated with the one piece body. Only the bonnet seal and stem seals remain to be counted. nd, with the variety of bonnet gaskets and stem seal arrangements available through the selection of optional features, even these threats can be minimized. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-3

4 TOP NTRY LL VLVS Materials OY MTRIL: ody Material ode: H J K L escription lloy 20 3M SS arbon Steel Inconel (625) 317 SS Hastelloy uplex (2205) Super uplex (2507) L arbon Steel ody (all types) STM 351 STM 351 STM 216 STM 494 STM 351 STM 494 STM 995 STM 995 STM 352 onnet N7M 3M W W6M 8M W12MW 3MN 3MWuN L Packing land STM 276 Type 316 Stainless Steel land Plate 316 Stainless Steel land Plate olts STM 193 rade 8 Stop STM 276 Type 304 Stop olts 300 Stainless Steel Lockplate 302 or 304 Stainless Steel Lever ssembly (1/2-2 ) 304 SS w/vinyl rip Lever Stem Nut (1/2" - 2") 300 Series Stainless Steel Lever ssembly (3-8 ) 316 SS dapter with Stainless Pipe 1 dapter Screw (3" - 8") 300 Series Stainless Steel Stem Screw (3" - 8") 300 Series Stainless Steel xternal rounding Spring Stainless Steel ody Joint Studs STM 193-8M STM STM 193-8M ody Joint Nuts STM 194-r.8 STM 194-2H STM 194-r.8 NOT 1: arbon Steel valves have galvanized pipe handles ody Material ode: M N P R S T W Y escription M35-1 (Monel) Nickel (200) arbon L-6XN Stainless Steel Titanium 254 SMO Hastelloy ody (langed ends) ody (uttweld, Socket weld, and screwed ends) onnet Packing land land Plate land Plate olts Lever ssembly (1/2-2 ) Lever Stem Nut (1/2" - 2") Lever ssembly (3-8 ) dapter Screw (3" - 8") Stem Screw (3" - 8") xternal rounding Spring ody Joint Studs ody Joint Nuts TRIM (INTRNL) MTRIL: STM 494 M35-1 STM 494 Z100 STM STM 351-8M STM 351 N3MN STM 351-3M L-6XN STM 351-8M STM 276 Type 316 Stainless Steel 316 Stainless Steel STM 193 rade 8 Stop STM 276 Type 304 Stop olts 300 Stainless Steel Lockplate 302 or 304 Stainless Steel 304 SS w/vinyl rip 300 Series Stainless Steel 316 SS dapter with Stainless Pipe 300 Series Stainless Steel 300 Series Stainless Steel Stainless Steel STM 193-8M STM 194-r.8 STM STM 351 K3MuN STM 494 N12MV Trim Material ode: H J K escription lloy L SS Hastelloy Stem, M35-1 all 410 SS Inconel (625) Hastelloy uplex (2205) Super uplex (2507) all STM 351-N7M STM 351-3M STM 494-M35-1 STM 446 or STM 473- or STM 276- or STM 164- STM N06625 or STM 494- STM 479/276 STM 479/ L K STM 494 W12MW or STM UNS S31803 or UNS S32760 or N04400 R.W6M STM 995 STM 995 R. 3MN R. 3MWuN Stem Seat Ring(s) (from bar, tube or pipe depending on availability) Internal Spring (5, 6, 8,,,, J, L, M, N, U seats) Internal Spring (4, 9,, H seats) STM N08020 STM L STM STM ON. STM 446 N06625 STM STM STM L STM or STM 446 N /316L or N Inconel X-750 STM 312- STM 312- Type 316 Type 316 STM 574 Inconel X-750 Inconel X-750 Hastelloy Inconel X-750 STM STM STM 479/276 S31803 STM 479/276 S31803 STM 574 Hastelloy Inconel X-750 STM 479/276 S32760 STM 479/276 S32760 N-4 ustomer Service (704)

5 TOP NTRY LL VLVS Materials TRIM (INTRNL) MTRIL (ONT ): Trim Material ode: M N R S T W Y escription M35-1 Nickel (200) L-6XN Stainless Steel Titanium 254 SMO Hastelloy all STM 494-M35-1 or STM 494-Z100 STM 691 STM 164-K400 or N08367 STM 367-r 3 or STM 335 N04400 STM or STM 351 STM 348 STM 351 N10665 or N3MN r. 2,3,or 4 K3MuN STM 494-N-12MV Stem Seat Ring(s) (from bar, tube or pipe depending on availability) Internal Spring (5, 6, 8,,,, J, L, M, N, U seats) Internal Spring (4, 9,, H seats) ST & SLS MTRIL: STM 164-K400 N04400 STM STM 164-K400 STM Inconel X-750 STM 691 N08367 STM 691 N08367 Inconel X-750 Inconel X-750 STM 351-8M or STM /316L STM STM /316L or STM STM 312- Type 316 STM 348 r. 2,3,or 4 STM 348 r. 2,3,or 4 STM 348 r. 2,3,or 4 STM UNS S31254 STM UNS S31254 STM 335 N10665 STM 335 N10665 Inconel X-750 Hastelloy -2 Seat ode: Seat arbon raphite 55% ronze, 5% Moly illed PT UHMWP Unfilled PK RMI (Seats & all) Seat O-ring Not pplicable Stem Packing lexible raphite onnet asket Spiral Wound lexible raphite Stem earing Nitronic 60 PK PK PK Nitronic 60 efault Suffix Seat ode: H Seat arbon Reinforced PK P 60% Stainless illed PT PT High Temp. raphite Seat O-ring Not pplicable Stem Packing lexible raphite RPT lexible raphite onnet asket Spiral Wound lexible raphite RPT (150/300) Spiral Wound PT (600) Spiral Wound lexible raphite Stem earing PK PK PK PK Nitronic 60 efault Suffix Seat ode: J L M N U Seat PI 607 P ire Seat PI 607 Multiseal ire Seat TM Multiseal Nylon UHMWP Seat O-ring P Multiseal Ring N/ Nylon Not pplicable Stem Packing lexible raphite lexible raphite PT lexible raphite onnet asket Spiral Wound lexible raphite Spiral Wound lexible raphite RPT (150/300) Spiral Wound PT (600) Spiral Wound lexible raphite Stem earing PK PK PK Nylon PK efault Suffix opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-5

6 TOP NTRY LL VLVS Seat Materials and Seat esigns ST O (PT) Polychlorotrifluoroethylene is typically used in cryogenic applications. High resistance to inorganic corrosive liquids, including oxidizing acids. Resistant to most organic solvents except some highly halogenated and aromatic materials. (igure 1) See Pressure-Temperature hart 3, page 12. igure 1 Seat esign 1 ST O L (TM MULTISL) PI-607 fire-safe design. This seat design has been successfully tested to the requirements of PI 607. The Multiseal seat is fully confined by a metallic seat holder which provides a secondary seal in the event of the loss of the primary TM seal during a fire. The torque characteristics will be the same as in the #M seats. (igure 3) See Pressure-Temperature hart 1, page 11. ST O M (TM MULTISL) pollo s Multiseal is a modified PolyTetraluorothylene (PT) that maintains the exceptional chemical resistance and heat resistance properties of conventional PT. (igure 1) See Pressure-Temperature hart 1, page 11. ST O (P) Perfluoroalkoxy seats withstand the effects of polymeric monomers such as butadiene and styrene. (igure 2) See Pressure-Temperature hart 1, page 11. Seat Seat Ring ST O J (P) PI-607 fire-safe design Perfluoroalkoxy seats withstand the effects of polymeric monomers such as butadiene and styrene. This seat design has been successfully tested to the requirements of PI 607. The P seat is fully confined by a metallic seat holder which provides a secondary seal in the event of the loss of the primaryp seal during a fire. The torque characteristics will be the same as in the # seats. (igure 3) See Pressure-Temperature hart 1, page 11. igure 2 Seat esign 2 ST O 5 (55% RONZ / 5% MOLY RT) Specifically intended for steam applications. lso applicable to abrasive and throttling applications because of the heavy loading of reinforcing materials and the presence of the inner ring. However, chemical compatibility may be a limiting factor in the application of this seat. (igure 2) See Pressure-Temperature hart 2, page 11. Seat ST O (50% STINLSS STL SRT) Intended for abrasive and throttling applications because of the heavy loading of reinforcing materials and the completely confined seat. (igure 2) See Pressure-Temperature hart 1, page 11. ST O 6 (UHMWP) Ultra High Molecular Weight Polyethylene offers good abrasion resistance making it suitable for use in high solids or slurry applications. These seats are completely confined by a metallic seat holder enhancing their performance in abrasive services. This seat is frequently specified in services where fluorine off-gasing in even the slightest amounts is objectionable. xamples of these services are food, tobacco processing, and nuclear services. (igure 2) See Pressure-Temperature hart 4, page 12. N-6 Seat Ring ustomer Service (704)

7 TOP NTRY LL VLVS Seat Materials and Seat esigns igure 3 Seat esign 3 Seat Seat Holder igure 4 Seat esign 4 Seat O-Rings ST O U (UHMWP) xhibits the same characteristics as the #6 seat with the exception that it utilizes the inner seat ring to enhance performance in abrasive services. UHMWP should be used with caution in the presence of solvents, and the operating torque can be expected to be 30% higher than that of the PT based seat materials. (igure 1) See Pressure-Temperature hart 4, page 12. ST O 8 (PK) PK (PolythertherKetone) offers a high strength alternative to RPT, resistant to creep and cold flow. This seat offers good abrasion resistance. Higher in cost, this material offers similar chemical resistance to PT but should be checked on application. Operating torque tend to be 40% higher than RPT. all stop recommended. (igure 2) See Pressure-Temperature hart 5, page 13. ST O (RON RINOR PK) arbon Reinforced PK provides improved abrasion resistance when compared to the unfilled variety. Higher in cost, this material offers a broader temperature range than PT with similar chemical resistance but should be checked on application. Operating torque tends to be 40% higher than PT. all stop recommended. (igure 2) See Pressure-Temperature hart 5, page 13. ST O 4 (RON RPHIT) esigned for high temperature applications. ball stop is required in applications above 500. Maximum service temperature is limited to 750 in oxidizing applications. This seat like all rigid seat materials does not necessarily provide bubble tight shut-off. Most test standards have allowable leakage rates or list classes of shut-off for this type of seat. e aware of the system design requirements when specifying this or any rigid seat. all stop recommended. (igure 1) See Pressure-Temperature hart 2, page 11. ST O H (HIH TMPRTUR RPHIT) esigned for very high temperature applications. ball stop is required in applications above 500. Maximum service temperature is limited to This seat like other rigid seat materials does not provide bubble tight shutoff. This seat is not as abrasion resistant as the #4 version. e aware of the system design requirements when specifying this or any rigid seat. all stop recommended. (igure 1) See Pressure-Temperature hart 2, page 11. ST O 9 (RMI) Working in conjunction with a ceramic ball, this seat outperforms all other materials in throttling and abrasive applications. It possesses excellent chemical resistance. ball stop is recommended for all applications. This seat like all rigid seat materials does not necessarily provide bubble tight shut-off. Most test standards have allowable leakage rates or list classes of shut-off for this type of seat. e aware of the system design requirements when specifying this or any rigid seat. (igure 4) See Pressure-Temperature hart 6, page 13. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-7

8 TOP NTRY LL VLVS Pressure-Temperature Ratings Valve ody Rating 1 psi Temp STM 216 rade W 2 arbon Steel STM 351 rade 8M 3 (close wrought equivalent is 316 SS) STM 351 rade 3M (close wrought equivalent is 316L SS) lass 150 lass 300 lass 600 lass lass 300 lass 600 lass 150 lass 300 lass to Valve ody Rating 1 bar Temp STM 216 rade W 2 arbon Steel STM 351 rade 8M 3 (close wrought equivalent is 316 SS) STM 351 rade 3M (close wrought equivalent is 316L SS) lass 150 lass 300 lass 600 lass lass 300 lass 600 lass 150 lass 300 lass to bar 51.1 bar bar 19.0 bar 49.6 bar 99.3 bar 15.9 bar 41.4 bar 82.7 bar bar 50.1 bar bar 18.4 bar 48.1 bar 96.2 bar 15.3 bar 40.0 bar 80.0 bar bar 46.6 bar 93.2 bar 16.2 bar 42.2 bar 84.4 bar 13.3 bar 34.8 bar 69.6 bar bar 45.1 bar 90.2 bar 14.8 bar 38.5 bar 77.0 bar 12.0 bar 31.4 bar 62.8 bar bar 43.8 bar 87.6 bar 13.7 bar 35.7 bar 71.3 bar 11.2 bar 29.2 bar 58.3 bar bar 41.9 bar 83.9 bar 12.1 bar 33.4 bar 66.8 bar 10.5 bar 27.5 bar 54.9 bar bar 39.8 bar 79.6 bar 10.2 bar 31.6 bar 63.2 bar 10.0 bar 26.1 bar 52.1 bar bar 38.7 bar 77.4 bar 9.3 bar 30.9 bar 61.8 bar 9.3 bar 25.5 bar 51.0 bar bar 37.6 bar 75.1 bar 8.4 bar 30.3 bar 60.7 bar 8.4 bar 25.1 bar 50.1 bar bar 36.4 bar 72.7 bar 7.4 bar 29.9 bar 59.8 bar 7.4 bar 24.8 bar 49.5 bar bar 34.7 bar 69.4 bar 6.5 bar 29.4 bar 58.9 bar 6.5 bar 24.3 bar 48.6 bar bar 28.8 bar 57.5 bar 5.5 bar 29.1 bar 58.3 bar 5.5 bar 23.9 bar 47.7 bar bar 23.0 bar 46.0 bar 4.6 bar 28.8 bar 57.7 bar bar 17.4 bar 34.9 bar 3.7 bar 28.7 bar 57.3 bar bar 11.8 bar 23.5 bar 2.8 bar 28.2 bar 56.5 bar bar 5.9 bar 11.8 bar 1.4 bar 25.2 bar 50.0 bar bar 25.0 bar 49.8 bar bar 24.0 bar 47.9 bar bar 19.9 bar 39.8 bar bar 15.8 bar 31.6 bar bar 12.7 bar 25.3 bar bar 10.3 bar 20.6 bar bar 8.4 bar 16.8 bar bar 7.0 bar 14.0 bar bar 5.9 bar 11.7 bar bar 4.6 bar 9.0 bar bar 3.5 bar 7.0 bar bar 2.8 bar 5.9 bar 1 Ratings per SM W: Upon prolonged exposure to temperatures above 800 (425 ), the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 800 (425 ) 3 8M: t temperatures above 1000 (538 ), use only when the carbon content is 0.04% or higher. 4 8M lass 150: langed nd valve ratings terminate at 1000 (538 ) N-8 ustomer Service (704)

9 TOP NTRY LL VLVS Pressure-Temperature Ratings Valve ody Rating 1 psi Temp STM 351 rade N7M (close wrought equivalent is lloy 20) STM 494 rade W-12MW (close wrought equivalent is Hastelloy ) STM 494 rade M-35-1 (close wrought equivalent is Monel ) lass 150 lass 300 lass 600 lass 150 lass 300 lass 600 lass 150 lass 300 lass to Ratings per SM Valve ody Rating 1 bar Temp STM 351 rade N7M (close wrought equivalent is lloy 20) STM 494 rade W-12MW (close wrought equivalent is Hastelloy ) STM 494 rade M-35-1 (close wrought equivalent is Monel ) lass 150 lass 300 lass 600 lass 150 lass 300 lass 600 lass 150 lass 300 lass to bar 41.4 bar 82.7 bar 15.9 bar 41.4 bar 82.7 bar 15.9 bar 41.4 bar 82.7 bar bar 40.1 bar 80.3 bar 15.6 bar 40.6 bar 81.3 bar 15.4 bar 40.2 bar 80.5 bar bar 35.3 bar 70.6 bar 14.5 bar 37.8 bar 75.6 bar 13.8 bar 35.9 bar 71.9 bar bar 32.0 bar 64.1 bar 13.7 bar 35.9 bar 71.7 bar 12.9 bar 33.7 bar 67.5 bar bar 29.4 bar 58.7 bar 13.0 bar 33.9 bar 67.9 bar 12.5 bar 32.7 bar 65.4 bar bar 27.2 bar 54.4 bar 12.1 bar 32.3 bar 64.5 bar 12.1 bar 32.6 bar 65.2 bar bar 25.4 bar 50.8 bar 10.2 bar 30.7 bar 61.5 bar 10.2 bar 32.6 bar 65.2 bar bar 24.4 bar 48.8 bar 9.3 bar 30.1 bar 60.1 bar 9.3 bar 32.6 bar 65.2 bar bar 29.4 bar 58.8 bar 8.4 bar 32.6 bar 65.1 bar bar 28.7 bar 57.4 bar 7.4 bar 32.4 bar 64.8 bar bar 28.3 bar 56.5 bar 6.5 bar 32.1 bar 64.2 bar bar 27.7 bar 55.3 bar 5.5 bar 31.6 bar 63.3 bar bar 27.2 bar 54.4 bar 4.6 bar 26.9 bar 53.8 bar bar 26.8 bar 53.5 bar 3.7 bar 20.8 bar 41.5 bar bar 26.3 bar 52.6 bar bar 25.2 bar 50.0 bar 1 Ratings per SM opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-9

10 TOP NTRY LL VLVS Pressure-Temperature Ratings Valve ody Rating 1 psi Temp STM 351 K3MuN (close wrought equivalent is 254 SMO) STM 351 8M (close wrought equivalent is 317SS) STM (close wrought equivalent is Titanium) lass 150 lass 300 lass 600 lass 150 lass 300 lass 600 lass 150 lass 300 lass to Ratings per SM Valve ody Rating 1 bar Temp STM 351 K3MuN (close wrought equivalent is 254 SMO) STM 351 8M (close wrought equivalent is 317SS) STM (close wrought equivalent is Titanium) lass 150 lass 300 lass 600 lass 150 lass 300 lass 600 lass 150 lass 300 lass to bar 51.7 bar bar 19.0 bar 49.6 bar 99.3 bar 20.0 bar 44.0 bar 87.9 bar bar 51.7bar bar 18.4 bar 48.1 bar 96.2 bar 19.6 bar 42.8 bar 85.6 bar bar 50.7 bar bar 16.2 bar 42.2 bar 84.4 bar 17.7 bar 36.4 bar 72.9 bar bar 45.9 bar 91.9 bar 14.8 bar 38.5 bar 77.0 bar 15.0 bar 30.0 bar 60.1 bar bar 42.7 bar 85.3 bar 13.7 bar 35.7 bar 71.3 bar 12.3 bar 24.9 bar 49.6 bar bar 40.5 bar 80.9 bar 12.1 bar 33.4 bar 66.8 bar 10.3 bar 20.8 bar 41.5 bar bar 38.9 bar 77.7 bar 10.2 bar 31.6 bar 63.2 bar bar 38.2 bar 76.3 bar 9.3 bar 30.9 bar 61.8 bar bar 37.6 bar 75.3 bar 8.4 bar 30.3 bar 60.7 bar bar 37.4 bar 74.7 bar 7.4 bar 29.9 bar 59.8 bar bar 36.5 bar 73.3 bar 6.5 bar 29.4 bar 58.9 bar bar 29.1 bar 58.3 bar bar 28.8 bar 57.7 bar bar 28.7 bar 57.3 bar bar 28.2 bar 56.5 bar bar 25.2 bar 50.0 bar 1 Ratings per SM ontact actory INONL 625 STM 494-R W6M NIKL 200 STM 494-Z100 N-10 ustomer Service (704)

11 TOP NTRY LL VLVS Pressure-Temperature Ratings HRT 1 P, TM, SRT PRSSUR-TMPRTUR RTINS P, ST O N J HRT 2 RPHIT, RONZ-MOLY - PRSSUR-TMPRTUR RTINS STM RT STS STURT STM opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-11

12 TOP NTRY LL VLVS Pressure-Temperature Ratings HRT 3 NYLON, PT PRSSUR-TMPRTUR RTINS HRT 4 UHMWP STS PRSSUR-TMPRTUR RTINS N-12 ustomer Service (704)

13 TOP NTRY LL VLVS Pressure-Temperature Ratings HRT 5 PK STS PRSSUR-TMPRTUR RTINS HRT 6 RMI STS PRSSUR-TMPRTUR RTINS opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-13

14 SM LSS, LN, STNR PORT imensions J (NO.HOLS) K J (PIP) (NO.HOLS) H IUR 1 H IUR 2 J (NO.HOLS) K (PIP) H IUR 3 J (NO.HOLS) H IUR 4 N-14 ustomer Service (704)

15 SM LSS, LN, STNR PORT imensions IUR 1 IUR 2 IUR 3 IUR 4 IUR 1 IUR 2 IUR 3 IUR 4 IUR 1 IUR 2 IUR 3 SM LSS 150, LN, STNR PORT imensions in Inches Size H J K 1/2" N 3/4" N 1" N 1.5" N 2" N 3" /4" SH.40 4" ** 3/4" SH.40 6"* " SH.80 8"* " SH.80 10"* **** N N 12"* **** N *** N * ear Operator or ctuation Recommended ** Top (2) holes in each flange are tapped 5/8-11 UN-2 *** Top (4) holes in each flange are tapped 7/8-9 UN-2 **** imension to top of stem (No handle) SM LSS 300, LN, STNR PORT imensions in Inches Size H J K 1/2" N 3/4" N 1" N 1.5" N 2" N 3" /4" SH.40 4" /4" SH.40 6"* " SH.80 8"* " SH.80 10"* *** N N 12"* *** N ** N *ear Operator or ctuation Recommended **Top 6 holes in each flange are tapped 1-1/8-8 UN-2 *** imension to top of stem (No handle) SM LSS 600, LN, STNR PORT imensions in Inches Size H J K 1/2" N 3/4" N 1" N 1.5" N 2" N 3" /4" SH.40 4"* /4" SH.40 6"* " SH.80 8"* " SH.80 *ear Operator or ctuation Recommended. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-15

16 SM LSS 300, SOKT WL, STNR PORT imensions IUR 1 IUR 2 H (PIP) IUR 3 SM LSS 300, SOKT WL, STNR PORT IUR 1 IUR 2 I 3 imensions in Inches Size H 1/ N 1/2" N 3/4" N 1" N 1.5" N 2" N 3" /4" SH.40 N-16 ustomer Service (704)

17 SM LSS 600, SOKT WL, STNR PORT imensions IUR 1 IUR 2 SM LSS 600, SOKT WL, STNR PORT imensions in Inches Size IUR 1 IUR 2 1/ /2" /4" " " " opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-17

18 SM LSS 300, NPT, STNR PORT imensions IUR 1 IUR 2 (PIP) IUR 3 SM LSS 300, NPT, STNR PORT IUR 1 IUR 2 I 3 imensions in Inches Size 1/ N 1/2" N 3/4" N 1" N 1.5" N 2" N 3" /4" SH.40 N-18 ustomer Service (704)

19 SM LSS 600, NPT, STNR PORT imensions NPT NPT IUR 3 IUR 4 SM LSS 600, NPT, STNR PORT I UR 3 IUR 4 imensions in Inches Size 1/ /2" /4" " " " opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-19

20 SM LSS 300, UTT WL, STNR PORT imensions IUR 1 IUR 2 (PIP) IUR 3 (PIP) IUR 4 SM LSS 300, UTT WL, STNR PORT I 1 IUR 2 IUR 3 IUR 4 imensions in Inches Size 1/2" N 3/4" N 1" N 1.5" N 2" N 3" /4" SH.40 4" /4" SH.80 6" " SH.80 8" " SH.80 N-20 ustomer Service (704)

21 SM LSS 600, UTT WL, STNR PORT imensions IUR 1 IUR 2 (PIP) IUR 3 (PIP) IUR 4 SM LSS 600, UTT WL, STNR PORT I 1 IUR 2 IUR 3 I 4 imensions in Inches Size 1/2" N 3/4" N 1" N 1.5" N 2" N 3" /4" SH.40 4" /4" SH.80 6" " SH.80 opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-21

22 SM LSS, LN, ULL PORT imensions J (NO.HOLS) J (NO.HOLS) K (PIP) H IUR 1 H IUR 2 J (NO.HOLS) K (PIP) H IUR 3 J (NO.HOLS) N-22 H IUR 4 ustomer Service (704)

23 SM LSS, LN, ULL PORT imensions SM LSS 150, LN, ULL PORT imensions in Inches Size H J K 1" N 1.5" N 2" /4" SH.40 3" /4" SH.40 4" " SH.80 6"* " SH.80 8"* *** N ** N 10"* *** N N 12"* *** N N * ear Operator or ctuation Recommended ** Top (2) holes in each flange are tapped 3/4-10 UN-2 *** imension to top of stem (No handle) IUR 1 IUR 2 IUR 3 IUR 4 SM LSS 300, LN, ULL PORT imensions in Inches Size H J K 1" N 1.5" N 2" /4" SH.40 3" /4" SH.40 4" " SH.80 6"* " SH.80 8"* *** N ** N 10"* *** N N 12"* *** N N *ear Operator or ctuation Recommended **Top 2 holes in each flange are tapped 7/8-9 UN-2 *** imension to top of stem (No handle) IUR 1 IUR 2 IUR 3 IUR 4 SM LSS 600, LN, ULL PORT imensions in Inches Size H J K 1" N 1.5" N 2" /4" SH.40 3" /4" SH.40 4"* " SH.80 6"* " SH.80 8"* *** N ** N *ear Operator or ctuation Recommended. **Top 2 holes in each flange are tapped 1-1/8-8 UN-2 ***imension to top of stem (No handle) IUR 1 IUR 2 IUR 3 I 4 opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-23

24 SM LSS 300 & 600, SOKT WL, ULL PORT imensions IUR 1 H (PIP) IUR 1 IUR 3 H (PIP) imensions in Inches Size H 1" N 1.5" N 2" /4" SH.40 IUR 3 SM LSS 300, ULL PORT, SOKT WL IUR 1 I 3 SM LSS 600, ULL PORT, SOKT WL IUR 1 imensions in Inches Size 1" " N-24 ustomer Service (704)

25 SM LSS 300 & 600, NPT, ULL PORT imensions IUR 2 NPT H (PIP) IUR 2 NPT IUR 4 NPT H (PIP) SM LSS 300, ULL PORT, NPT imensions in Inches Size 1" N 1.5" N NPT 2" /4" SH.40 IUR 4 IUR 2 I 4 SM LSS 600, ULL PORT, NPT IUR 2 imensions in Inches Size 1" " opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-25

26 LSS 300, UTT WL, ULL PORT imensions (PIP) IUR 1 IUR 2 (PIP) IUR 3 IUR 4 SM LSS 300, UTT WL, ULL PORT imensions in Inches Size 1" N 1.5" N 2" /4 SH.40 3" /4" SH.40 4" " SH.80 6" " SH.80 8" * N N *imension to top of stem (no handle) IUR 1 I 2 IUR 3 I 4 N-26 ustomer Service (704)

27 TUTION MOUNTIN P TILS imensions R.31 R.44 1/4"-20 UN 5/16"-18 UN 1.63 Ø Ø SQUR TIL SQUR TIL R.44 3/8"-18 UN R.62 3/4"-10 UN Ø Ø SQUR TIL SQUR TIL 45 8X 45 8X R /8"-11 UN Ø /4"-10 UN Ø Ø Ø ±.001 TIL TIL X X opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-27

28 TUTION MOUNTIN - LN, STNR PORT imensions K H J L SM LSS 150, LN, STNR PORT imensions in Inches Size Mtg Pad H J K L 1/2" N N N N N 3/4" TIL /16"-18 1" /16" " /16"18 TIL 2" /16"-18 3" /8"-16 TIL " /16"-14 6" /16"-14 TIL " /2"-13 10" /4"-10 TIL * 5.77 N 12" N N N N N *Keyway length SM LSS 300, LN, STNR PORT imensions in Inches Size Mtg Pad H J K L 1/2" N N N N N 3/4" TIL /16"-18 1" /16" " /16"-18 TIL 2" /16"-18 3" /8"-16 TIL " /16"-14 6" /16"-14 TIL " /2"-13 10" /4"-10 TIL * 5.77 N 12" N N N N N *Keyway length SM LSS 600, LN, STNR PORT imensions in Inches Size Mtg Pad H J K L 1/2" N N N N N 3/4" /8"-16 1" TIL /8" " /2" " /2"-13 3" /2"-13 TIL " /2"-13 6" /4"-10 TIL " /4"-10 N-28 ustomer Service (704)

29 TUTION MOUNTIN - LN, ULL PORT imensions K H J L SM LSS 150, LN, ULL PORT imensions in Inches Size Mtg Pad H J K L 1" /16"-18 TIL 1.5" /16"-18 2" /16"-18 TIL " /8"-16 4" /16"-14 TIL " /2"-13 8" TIL * 5.77 N N N N N N 10" N N N N N TIL * 8.40 N 12" N N N N N *Keyway length SM LSS 300, LN, ULL PORT imensions in Inches Size Mtg Pad H J K L 1" /16"-18 TIL 1.5" /16"-18 2" /16"-18 TIL " /8"-16 4" /16"-14 TIL " /2"-13 8" TIL * 5.77 N N N N N N 10" N N N N N TIL * 8.40 N 12" N N N N N *Keyway length SM LSS 600, LN, ULL PORT imensions in Inches Size Mtg Pad H J K L 1" /8"-16 TIL " /2"-13 2" /2"-13 TIL " /2"-13 4" /2"-13 TIL " /4"-10 8" TIL * 5.77 N N N N N N *Keyway length opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-29

30 TUTION MOUNTIN - SOKT WL & NPT imensions SM LSS 300, SOKT WL & NPT, STNR PORT imensions in Inches Size Mtg Pad 1/2" /4" TIL " " TIL 2" " TIL SM LSS 300, SOKT WL & NPT, ULL PORT imensions in Inches Size Mtg Pad 1" TIL 1.5" " TIL SM LSS 600, SOKT WL & NPT, STNR PORT imensions in Inches Size Mtg Pad 1/2" /4" " TIL " " SM LSS 600, SOKT WL & NPT, ULL PORT imensions in Inches Size Mtg Pad 1" TIL " N-30 ustomer Service (704)

31 TUTION MOUNTIN - UTT WL imensions SM LSS 300, UTT WL, STNR PORT imensions in Inches Size Mtg Pad 1/2" /4" TIL " " TIL 2" " TIL " " TIL " SM LSS 300, UTT WL, ULL PORT imensions in Inches Size Mtg Pad 1" TIL 1.5" " ONTT TORY 3" TIL " TIL " " TIL * 5.77 N *Keyway length opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-31

32 TUTION MOUNTIN - LSS 600, UTT WL, STNR PORT imensions LSS 600 UTTWL STNR PORT - SIZS 1/2"THRU 2" K L J H LSS 600 UTTWL STNR PORT - SIZS 3"THRU 6" SM LSS 600, UTT WL, STNR PORT imensions in Inches Size Mtg Pad H J K L 1/2" /4" " TIL N 1.5" " " /2"-13 TIL " /2"-13 6" TIL /4"-10 N-32 ustomer Service (704)

33 STNR ONNTS The valve s seat material code in the Product Numbering System determines the default stem seal material (default is either PT V-Rings or flexible graphite rings). Note: To meet a wide range of application requirements, a variety of materials are offered. See options in the How to Specify section. PT V-RIN STM SLS STNR ONNT ISO 5211 Mounting Pad xtremely low coefficient of friction Molded V-shaped rings are spring-loaded and self adjusting. Provides very good stem seal performance Live-loaded, V-ring packing assures long maintenance-free operation by maintaining a constant packing force without over-compression. orrosion-resistant stainless steel conical washers store compressing energy; consequently, the valve can be cycled more without stem seal adjustments LXIL RPHIT RIN STM SLS ie ormed Rings nhancement Live Loaded Packing (add suffix to product number) -76 Suffix Live loaded valve with handle or lever. -77 Suffix Live loaded valve with actuator or manual gear. nhancement Low missions P Suffix up and cone graphite rings (V-shaped) are often specified for applications where fugitive emissions must be controlled. nhancement Live Loaded Packing -76 Suffix Live loaded valve with handle or lever. -77 Suffix Live loaded valve with actuator or manual gear. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-33

34 XTN ONNTS See Table XTN ONNT (dd -70 Suffix) 3" & Smaller N 80 & Smaller 4" N 100 6" N 150 8" N " N " N 300 XTN ONNT HIHT SM lass 150 SM lass 300 SM lass 600 Std Port in. (mm) ull Port in. (mm) Std Port in. (mm) ull Port in. (mm) 4" 4" 4" 4" (102) (102) (102) (102) 4" 6.5" 4" 6.5" (102) (165) (102) (165) 6.5" 6.5" 6.5" 6.5" (165) (165) (165) (165) 6.5" (165) 10" (254) 10" (254) 10" (254) 12.5" (318) 12.5" (318) 6.5" (165) 10" (254) VNTS: xtended bonnets provide excellent performance in higher temperature or semi cryogenic applications. The extended bonnet design moves the stem seals further away from the process flow s temperature, and the stem seals temperature is closer to ambient temperature. xtended bonnets move the packing adjustment at least 4 ; therefore, installed insulation typically will not need to be disturbed to adjust the stem packing. If and when stem leakage occurs, it can be immediately observed and corrective action taken without insulation removal. valuable feature of the xtended onnet is that it is field retrofitable. In addition to being able to order valves with several bonnet styles direct from the factory, pre-assembled kits are available with the stem, bonnet, packing, gland, plate and nuts assembled together and properly torqued for dependable performance. ontact your local pollo Representative for kit part numbers for any specific valve or application. N-34 ustomer Service (704)

35 OUL PK ONNTS Packing land earing Washer Stem Packing Monitoring Port Spring OUL PK ONNT (dd -90 Suffix) pollo recommends also specifying live-loading with the -90 option. OUL PK ONNT WITH PORT (dd -9P Suffix) pollo recommends also specifying live-loading with the -9P option. The standard pollo Top ntry Valve bonnet with PT V-Rings or raphite V-Rings ( -P ) provide exceptional fugitive emission performance. See Standard onnet onfiguration. In conditions where double packed shaft sealing systems are required, pollo also offers the -90 and -9P sealing systems. pollo s ouble Packed onnets ( -90 and -9P ): esigned and tested to keep fugitive emissions below 100 parts per million volume (ppmv) in your application for tens of thousands of cycles. Installs easily on existing valves or can be purchased with new valves. Helps seal your process to conserve valuable process fluid while protecting the environment against the emission of hazardous or polluting fluids. Longer life and improved reliability of pollo ouble Packed onnet systems reduce maintenance cost and downtime. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-35

36 STM JKT TOP NTRY LL VLVS onbraco s pollo Top ntry all Valves are ideally suited for jacketed applications. The top entry concept allows for continued access to stem packings and valve internals for ease of maintenance without disturbing the jacket itself or removing the valve from the pipeline. Partial jacketing may be used on standard valves. Partial jacketing is applied just to the center section of the valve and does not incorporate the neck area or flanges of the valve. It is generally specified to allow the use of standard flanges and retain conventional flange bolting. Welded full jacketing may be applied to valves with oversize flanges or standard flanges. (ully jacketed, standard flange valves have modified flanges with blind tapped stud holes in place of the ordinary through holes.) Valves and jacketing can be supplied in a variety of materials. ommon materials are stainless valves with stainless jackets, but exotic combinations such as lloy 20 valves with carbon steel flanges and carbon steel jacketing have been supplied to meet the performance and cost requirements for specific applications. lamp-on jacketing offers flexibility not available in the other configurations. lamp-on jacketing can be applied to valves already in service, or can be removed and reinstalled on a replacement valve or another similar valve in another application. lamp-on jackets can be supplied as a weldment or in cast aluminum. heat transfer compound can be applied between the clamp-on jacket and valve to improve its efficiency. ombining these jacketed valves with extended bonnets for safe convenient operation, and adding carbon graphite seats or ceramic balls and seats enables the valve to handle a broad range of viscous materials and temperatures. ull Welded Jacket ull Welded Jacket with Oversize langes lamp-on Jacket N-36 ustomer Service (704)

37 SPIL PPLITIONS IR-S RQUIRMNTS Seat and seal arrangements are available to address valves in applications where performance during and immediately after a fire are a concern. L (Multiseal) seat configuration offers tested fire-safe performance. raphite spiral wound gaskets are available for bonnet seals. ie-formed rafoil in various configurations provide the stem seals. RSIV & ROSIV SRVIS Soft Seated valves for abrasive services feature seat inserts completely confined by metallic components. Some designs feature inner and outer seat support rings, where the inner ring helps shield the seat insert from abrasives in the service. Other designs feature one piece seat holders which completely confine the seat insert and provide the same function in protecting the soft seat from abrasive particles in the flow stream. In addition to the seat configuration options, resilient and rigid seat materials are available. The rigid seat choices include carbon-graphite, ceramic, peek, and carbon reinforced peek. The seats and the ball are both produced from ceramic in the one case. ny of these seats provide improved resistance to abrasion and erosion and additionally extend the potential service range to 1000 (538 ). or steam services, the #5 seat, a RPT containing 55% bronze and 5% molybdenum disulfide, is an excellent choice as is the #4 carbon-graphite seat. HLORIN SRVI Valves intended for service in dry chlorine require specific alloy selections, design features, cleaning and testing procedures. In accordance with the guidelines established by The hlorine Institute, Pamphlet 6, Hastelloy trimmed carbon steel valves (model numbers starting with H ) are suggested, and M35-1 trimmed carbon steel valves (model numbers beginning M ) are the alternative for dry chlorine. ll Hastelloy or M35-1 valves are also available. NOT: Stainless steel valves or components are not recommended. Selecting the required -26 feature insures a valve that has been vented, cleaned, and tested to comply with the requirements of The hlorine Institute Pamphlet 6. OXYN SRVI or this application, cleanliness is of utmost importance. pollo Top ntry Valves specified for oxygen service (option -57 ) are subjected to rigorous preparation procedures including special pre-cleaning and inspection followed by ultrasonic cleaning and more intense inspection. ll to insure that the finished valve is free of burrs and sharp edges as well as cleaned of hydrocarbon residues and particulate matter. Once valves destined for oxygen service enter onbraco s clean room for preparation, they do not leave until they have been cleaned, assembled, thoroughly tested, inspected, tagged and bagged to meet customer requirements. ll pollo Top ntry Valves have anti-static features designed in. Valves for oxygen service must also be fitted with PT and packing. When planning to insulate valves, consider specifying one of our extended bonnet options. HIH TMPRTUR SRVI or any applications utilizing graphite, carbon graphite, peek, carbon reinforced peek, or ceramic seats, a ball stop should be incorporated into the valve design (option RS ). This option is suggested at any temperature but it becomes a necessity above 500 (260 ) or when using ceramic seats. The ball stop prevents the ball and seat from sliding down the 7 wedge when expansion caused by the temperature increase widens the wedge. If the ball was permitted to slide down the wedge, the valve would be locked tight when cooling caused the wedge to contract. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-37

38 LOW OIINTS LOW O LIQUIS or The table below presents the low oefficients (v) for pollo Top ntry all Valves. This number represents the flow (in gallons per minute of water) required to produce a 1 psig pressure drop across the valve. The data shown is for a valve in the full open position. ata for various degrees of open are available upon request. The values shown represent the average for several tests which highlighted the variability of low oefficients. It is not unreasonable to expect a 10% to 20% deviation for a specific valve from the nominal figures shown. Where: Q = low in US PM P = Pressure rop (PSI) S = Specific ravity at flow conditions V = Valve low oefficient Knowing specific system characteristics; such as line size, flow rate, temperature and pressure and knowing specific fluid characteristics; such as specific gravity, density, or compressibility factor allows the verification of the pressure drop across a known valve. Or conversely, in the absence of a valve size and knowing an acceptable pressure drop under the described flow conditions, it is possible to select an appropriately sized valve. LOW O SS Where: Q = low in SM P = Pressure rop (PSI) P2 = Outlet Pressure PSI T = Temp.( R) or ( + 460) S = Specific ravity at flow conditions V = Valve low oefficient POLLO TOP NTRY ULL PORT VLV LOW OIINTS Valve Size 150 lass langed 300 lass langed 600 lass langed 1" /2" " " " " " POLLO TOP NTRY VLV LOW OIINTS Valve Size 150 lass langed nd 300 lass langed nd 300 lass uttweld nd 300 lass Socket Weld 300 lass NPT 600 lass langed nd 600 lass uttweld nd 600 lass Socket Weld 600 lass NPT 1/2" /4" " /2" " " " " 1,500 1,500 1,500 1,700 1,700 8" 2,500 2,500 3,100 10" 3,800 3,800 4,900 N-38 ustomer Service (704)

39 OPRTIN TORQU There are several elements involved in developing an appropriate in-service valve operating torque. Selection of the basic valve torque constant, shown on this page establishes the nominal valve torque based on the valve size, specified valve seat and the approximate working pressure. rmed with the nominal valve operating torque, adjustments are now made to account for individual service conditions. These factors are selected from the table at the lower right. They are additive, or combined in series and used to arrive at the in-service torque. XMPL Selected Valve: w/ M seat (Model: S-M0-01) Torque onstant: 1250 in-lbs Service actors: ON/O Service 0.0 lean ry ir 0.3 Weekly Operation 0.2 Net Service actor 0.5 In Service Valve Torque: 1250 x ( ) = 1875 in-lbs (This is the valve torque used to select an actuator.) TORQU ONSTNTS OR TOP NTRY LL VLVS Seats 5 6** J L M U** Valve Size Std. Port (Inches) Valve Size ull Port (Inches) LL VLV TORQU JUSTMNT TORS ifferential Pressures (psig) (In.-Lbs.) LSST* rafoil dder 1/2 thru 1 1/2 thru 3/ / / , ,250 1,650 2,000 3,200 1, ,000 2,500 3,300 4,100 6,500 4, ,300 6,700 8,200 11,400 18,000 10, ,000 14,000 18,500 25,000 36,000 22, ,500 22,000 30,000 40,000 62,000 37,000 1,326 1/2 thru 1 1/2 thru 3/ / , / ,050 1, ,250 1,850 2,400 2,950 4,900 2, ,700 3,700 4,900 5,900 10,000 5, H 6 4 7,410 10,100 13,400 16,400 25,300 14, N ,000 20,000 26,000 34,500 56,000 30, ,000 32,000 45,000 60,000 96,000 50,000 1,326 *LSST - Long Stand Still Torque **Rated torque for #6 and U seat add 30% Rated torque for #9 ceramic seat is to be increased by 10% ear operator or actuation recommended PROVISION ONITION TOR Type of Operation On/Off Service 0 Modulating Service 0.25 Liquid, lean Particle ree 0 Liquid, irty, Slurry, Raw Water 0.3 to 0.8 Liquid, lack Liquor, Lime Slurry 0.8 Liquid, Oil, Lubricating 0 Process Media Liquid, Viscous, Molasses 0.3 as, lean & Wet 0 as, ry 0.3 to 0.5 as, irty, ir Slurry, Natural as 0.5 to 1 Oxygen, hlorine 0.5 Superheated Steam, Saturated Steam Refer to Process Temp. Once Per ay or More 0 requency of Operation** Once Per Week 0.2 Once Per Month 0.5 Less Than Once Per Month (LSST) 1 Process Temperature pplications bove 225 eg (107 ) 0.50 pplications elow -20 eg (-29 ) 0.25 Option -49 ssembled ry 0.3 Option -57 Oxygen leaned 0.3 Option -67 leaned for Industrial as 0.3 Option -90 ouble Packed xtended onnet 0.2 ustomer Specified Prescribed Safety actor 0.2 to 2 ** If accounting for LSST disregard frequency of operation. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-39

40 HOW TO SPIY TOP NTRY LL VLVS S J L OY MTRIL TRIM MTRIL LSS, PORT, NS ST RON STL STIN - STM 216 rade W L L low-temp service P chromium-molybdenum high temp service STINLSS STL STIN S - STM 351 rade 8M (316 SS) N7M (lloy 20) M* (316L) M (317 SS) J MN (2205 duplex) K MWuN (2507 super duplex) R N3MN (L6XN super austenitic) W K3MuN (254 SMO) NIKL S LLOY STIN - STM 494 rade W6M (INONL 625) H W12MW (Hastelloy ) M M35-1 (MONL ) N Z100 ommercially pure nickel Y N12MV (Hastelloy -2) TITNIUM STIN T - STM 367 r 3 ommercially pure titanium * langed Valves Only - 3M ( ) Represents lose Wrought quivalent STINLSS STL S SS - lloy L SS SS J - 220S uplex SS K Super uplex SS R - L6XN W SMO NIKL S - Inconel H - Hastelloy M - M35-1 (Monel) - Hastelloy Stem, M35-1 all N - Nickel Y - Hastelloy TITNIUM T - Titanium LSS 150 Standard Port - langed ull Port - langed LSS 300 Standard Port - langed - NPT - NPT x Socket Weld N - Socket Weld P - uttweld R - L x uttweld S - RTJ langes ull Port 3 - uttweld - langed L - NPT M - Socket Weld Y - NPT x Socket Weld LSS 600 Standard Port H - NPT J - Socket Weld K - langed Q - NPT x Socket Weld W - uttweld ull Port 4 - NPT 6 - NPT x Socket Weld 7 - uttweld T - Socket Weld U - langed MULTI-SL L - Multi-Seal TM, PI-607 ertified (igure 3) M - Multi-Seal (igure 1) UHMWP 6 - UHMWP (igure 2) U - UHMWP (igure 1) RPHIT ( HR ST TIHTNSS) 4 - arbon raphite, 750 max. (igure 1) H - High Temp raphite, 1000 max. (igure 1) PK ( HR ST TIHTNSS) 8 - PK (igure 2) - PK, 30% arbon Reinforced (igure 2) RMI ( HR ST TIHTNSS) 9 - eramic (igure 4) NYLON N - Nylon dditional Seats 5-55% ronze, 5% Moly, (igure 2) - P (igure 2) - SRPT, 60% SS, 40% T by weight 50% SS Min (igure 2) - PT (igure 1) J - P, PI-607 ertified (igure 3) igure Numbers in parentheses indicate the Seat esign. See Seat ata section for details. Seat code also dictates default seal material and default suffix. See Materials section for details. Pressure-Temperature ratings are found in the Pressure-Temperature Ratings section. N-40 ustomer Service (704)

41 HOW TO SPIY TOP NTRY LL VLVS 4 24 SIZ (IN) OPTIONS 3-1/2 4-3/ H efault Suffix for M and Seats -24- efault Suffix for 4, 5, 6, 8, 9,,,, H, J, L, N, U Seats Optional eatures may be used alone or in combination (simply add the suffixes to the Product Number in the order listed below). Note: The -01 suffix is not used if there are additional suffixes. Note: Not all combinations are available on all valves Stem xtension -10- Stainless Pipe Handle (3 & Larger arbon Steel only) -14- Vented ody esign -15- Wheel Handle, Stainless Steel -24- raphite Packing & Spiral Wound raphite asket -- Not always ire Safe -26- Vented & leaned for hlorine Service (S, H, & MO only) -45- No Lever or Nut -- are Stem -49- ssembled ry -- No Lubrication -57- Oxygen leaned -67- leaned for Industrial ases -70- xtended onnet -73- T Packing, Spiral Wound Seals - T illers -76- Live Loaded - Valve with Lever -77- Live Loaded - Valve with ear or ctuator -82- lat aced langes -90- ouble Packed xtended onnet -9P- ouble Packed xtended onnet with Port -- Titanium & raphite Spiral Wound onnet asket -- STM 193 rade 7 olts -T- Teflon oated STM 193 rade 7 asteners -- eramic all Only -S- eramic Seat Only -- elta errite Report (SS Only) -P- ye Penetrant -P- V-Ring raphite Packing -K- Kolsterised all -M- Manual ear Operator -MH- Manual ear Operator with Lockout -MJ- Manual ear Operator with Oversize handwheel -MK- Manual ear Operator with Lockout & Lockout -MP- Positive Material Identification -N- N ertified (Rc 22 Max) -NO- Titanium olts -P- No Plastisol rip on Lever (used in Tobacco plants) -RS- low-out Proof Welded all Stop with Safety ap -SR- Spring return -T- Hydrostatic Test with ertified Report -T- Test to PI 6 with ertification -TM- Material Traceability -TR- Hydrostatic Test with certification & MTR -TW- Hydrostatic Test with Witness & ertification MOL RVISION ssigned by actory XMPL: SJL424 arbon Steel ody 316 SS Trim lass 600 Standard Port Socket Weld nds PI-607, Multiseal Seat 3/4 Spiral Wound lexible raphite asket lexible raphite Packing Model Revision = utt Weld utt Weld valves include a suffix that specifies the end preparation e.g. schedule W1(SH10), W4(SH40), W8(SH80), etc NOT: This is a very limited list of the available options. ontact the factory for specific requirements and availability. * M is eneric for ear Operators. ontact actory or Price ook for Specific pplication and Part No. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-41

42 HOW TO SPIY SL RPIR KIT OR ISO 5211 ONNT PLS US LL IITS WHN ORRIN S S 0 M 5 01 TOP NTRY RPIR KIT TRIM MTRIL VLV LSS ST SIZ ITIONL TURS MOL RVISION Use S for Insert trim codes 0-150/300 Insert seat codes from 5-1/2-1 xamples: - ISO onnet 1st haracter from How to How to Specify table 7-1-1/ Standard (PT Packing, RPT ody Seal) onfiguration Specify table raphite Packing, Spiral Wound ody Seal 0-3 Repair kits with HR seats also - 4 There may be cases where multiple options are used: include the ball. The ball is lapped - 6 X: -90P, -24RS, -90PRS to the seats H - 12 STNR MTRIL LIST Y ST SLTION Seat esignation Stem Packing onnet asket Stem earing lass efault Suffix 4 lexible raphite Spiral Wound raphite Nitronic 60 ll 24 5 lexible raphite Spiral Wound raphite PK ll 24 6 lexible raphite Spiral Wound raphite PK ll 24 8 lexible raphite Spiral Wound raphite PK ll 24 9 lexible raphite Spiral Wound raphite Nitronic 60 ll 24 lexible raphite Spiral Wound raphite PK ll 24 lexible raphite Spiral Wound raphite PK ll 24 lexible raphite Spiral Wound raphite PK ll 24 PT RPT PK 150/300 Spiral Wound PT PK H lexible raphite Spiral Wound raphite Nitronic 60 ll 24 J lexible raphite Spiral Wound raphite PK ll 24 L lexible raphite Spiral Wound raphite PK ll 24 M PT RPT PK 150/300 Spiral Wound PT PK N lexible raphite Spiral Wound raphite Nylon ll 24 U lexible raphite Spiral Wound raphite PK ll 24 N-42 ustomer Service (704)

43 WRRNTY N LIMITTIONS O LIILITY onbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of IV years from the date of delivery to you, our initial purchaser. This warranty applies to pollo brand product with Made in the US markings only. Should any failure to conform to this warranty appear within IV years after the date of the initial delivery to our initial purchaser, onbraco will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with onbraco s recommendations and standard industry practice, correct such defects by suitable repair or replacement at onbraco s own expense. POLLO INTRNTIONL PROUTS: onbraco Industries, Inc. warrants its International products, to its initial purchaser only, that its international products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of TWO years from the date of delivery to you, our initial purchaser. THIS WRRNTY IS XLUSIV N IS IN LIU O NY IMPLI WRRNTY O MRHNTILITY, ITNSS OR PRTIULR PURPOS OR OTHR WRRNTY O QULITY, WHTHR XPRSS OR IMPLI, XPT TH WRRNTY O TITL N INST PTNT INRINMNT. orrection of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of onbraco to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of onbraco Industries, Inc. that no warranty of any kind, whether expressed or implied shall pass through our initial purchaser to any other person or corporation. LIMITTION O LIILITY: onbraco Industries, inc. SHLL NOT UNR NY IRUMSTNS LIL OR SPIL OR ONSQUNTIL MS SUH S, UT NOT LIMIT TO, MS OR TO LOSS O OTHR PROPRTY OR QUIPMNT, LOSS O PROITS OR RVNU, OST O PITL, OST O PURHS OR RPLMNT OOS, OR LIMS O USTOMRS O OUR INITIL PURHSR. TH RMIS O OUR INITIL PURHSR, N LL OTHRS, ST ORTH HRIN, R XLUSIV, N TH LIILITY O ONRO WITH RSPT TO SM SHLL NOT, XPT S XPRSSLY PROVI HRIN, X TH PRI O TH OOS UPON WHIH SUH LIILITY IS S. * It is the end user s responsibility to confirm that items intended for use satisfy local codes and standards. opyright 2016 pollo Valves, Manufactured by onbraco Industries - Printed in the US N-43

44 N-44 ustomer Service (704)